ERO610 • Ceramic AC Capacitors • Class X1, 440V AC/Class Y2, 250VAC TYPICAL APPLICATIONS For worldwide use as electromagnetic interference suppressor in all X1 and Y2 applications. CONSTRUCTION Disc capacitors with epoxy coating. Epoxy dipped, insulating, flame retarding according to UL 94V-0. TECHNICAL DATA Rated voltage UR (IEC 60384-14.2) X1 440 VAC, 50 Hz Y2 250 VAC, 50 Hz Capacitance range 1000-12000 pF Capacitance tolerance ± 20% Temperature range (-40 to +125)°C Climatic category IEC 40/125/21 Approvals VDE, UL, CSA Dissipation factor tanδ ≤ 25 • 10 -3 Test voltage between terminals Component test: 5 mm: 2200 VAC, 50 Hz, 2 s 7.5 mm: 2500 VAC, 50 Hz, 2 s As repeated test admissible only once with 2000 VAC, 50 Hz, 2 s Random sampling test (destructive test): 1500 VAC, 50 Hz, 60 s Dielectric strength of body insulation 2000 VAC, 50 Hz,60 s (destructive test) Insulation resistance ≥ 6 • 10 9 Ω Taping and special lead configurations On request p Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute – and we specifically disclaim – any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained. ERO610 ARTICLE TABLE Quantity per package Capacitance pF D x s Max (mm) 1000 1500 1800 2200 2500 3300 4700 5000 6800 8200 10000 12000 p±1* (mm) 6.5 x 4.5 8.0 x 4.5 8.0 x 4.5 9.0 x 4.5 9.0 x 4.5 10.0 x 4.5 12.0 x 4.5 12.0 x 4.5 17.0 x 4.5 17.0 x 4.5 21.0 x 4.5 21.0 x 4.5 5 5 5 5 5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 d±0.05* (mm) 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 V±0.5* (mm) Article code 1 st block 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.6 1.6 1.6 1.6 Ceramic dielectric ERO610RJ4100M ERO610RJ4150M ERO610RJ4180M ERO610RJ4220M ERO610RJ4250M ERO610RK4330M ERO610RK4470M ERO610RK4500M ERO610RK4680M ERO610RK4820M ERO610RK5100M ERO610RK5120M K 4000 K 4000 K 4000 K 4000 K 4000 K 4000 K 4000 K 4000 K 4000 K 4000 K 4000 K 4000 * Standard lead configuration, other lead spacing and diameter available on request. APPROVALS/REFERENCE DOCUMENTS Certification Body Specification Approval reference VDE UL EN 132400 UL 1414 (UR = 250 VAC) 40001990 E73869 CSA (cUL recognition) C 22.2 No. 1-M90 (UR=250 VAC) 216038 MARKING 3.3 nF to 12 nF 1 nF to 2.5 nF ERO 4n7 M IEC 384-14/2 440 250 250~ X1 Y2 c � us 440~X1 ERO 2n2 M 250~Y2 All approval marks are also shown on the label. ORDERING INFORMATION Article code 1st block See article table Pos. 13 Capacitance tolerance code: M = ± 20% standard 2nd block See separate brochure: Ceramic Disc, EMI and Safety Capacitors, General information Page 5 See article table and page 19 in the KEMET Film Capacitors 2003 catalogue. For options, see Ceramic Disc, EMI and Safety Capacitors, General information, Page 5. PACKING The box dimensions for bulk packaging are 245 x 145 x 80 mm. Quantity/package as per article table. Reels with taped capacitors are packed 10 in a box with dimension 370 x 370 x 560 mm. Quantity/reel according to article table. The standard quantity/reel is for 360 mm reel. If 500 mm reel is required, it must be specified when ordering and the quantity is 2 x the given quantity. DATA SHEET ERO610 Specifications subject to change without notice © KEMET 2011 2