10mm DIP Rotaries Series FR01 Distinctive Characteristics Compact dimensions and low profile allow high density mounting and close stacking of PC boards. Highly visible legends and choice of screwdriver, shaft or dial actuators with arrow position indication provide trouble-free code setting. Knob actuator also available. Real or complement code setting identified by color-keyed actuator. Detent mechanism gives crisp, positive action for accurate switch setting. Crimped terminals ensure secure PC mounting and prevent dislodging during soldering. Cam activated movable contact and gold contacts assure contact reliability and continuity. Surface mount model with screwdriver actuation available and shown in the surface mount section. Actual Size Contact factory for custom models with .200” (5.08 mm) terminal spacing. NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 05-08 10mm DIP Rotaries Series FR01 General Specifications Electrical Capacity (Resistive Load) Switching Rating: 100mA @ 5V DC Nonswitching Rating: 100mA @ 50V DC Other Ratings Contact Resistance: 100 milliohms maximum for circuit; 30 milliohms maximum for contact point Insulation Resistance: 1,000 megohms minimum @ 250V DC Dielectric Strength: 250V AC minimum for 1 minute minimum Mechanical Life: 10,000 detent operations minimum Electrical Life: 10,000 detent operations minimum Notes: A detent operation is one actuator position operation or stepping. A cycle is one 360° rotation. 10,000 detent operations equal 625 cycles for hexadecimal devices or 1,000 cycles for decimal devices. Nominal Operating Torque: Metal Shaft: 0.009Nm for decimal devices; 0.011Nm for hexadecimal devices All other Actuator types: 0.008Nm for decimal devices; 0.01Nm for hexadecimal devices Contact Timing: Shorting (Avoid possible false signal by turning off power before switching.) Materials & Finishes Actuators: Bushing : Outer Case: Housing & Base: Movable Contacts: Stationary Contacts: Terminals: Terminal Cover: Bracket: Environmental Data Operating Temperature Range: Humidity: Vibration: Shock: PCB Processing Soldering: Cleaning: Standards & Certifications Flammability Standards: UL Recognition or CSA Certification: Screwdriver and Plastic Shaft - Glass fiber reinforced polyamide (UL94V-0); Dial - Polyoxymethylene; Metal Shaft - Brass with nickel plating Brass with nickel plating (for Metal Shaft model) Glass fiber reinforced PBT (for Metal Shaft model) Glass fiber reinforced polyamide (UL94V-0) Copper alloy with gold plating Phosphor bronze with gold plating Phosphor bronze with gold plating Polyamide (Right angle model only) Phospher bronze with tin plating (for Metal Shaft model) –25°C through +85°C (–13°F through +185°F) 90 ~ 95% humidity for 240 hours @ 40°C (104°F) 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 5 minutes; 3 right angled directions for 2 hours 50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction) Wave Soldering Recommended. See Profile A in Supplement section. Manual Soldering: See Profile A in Supplement section. These devices are not process sealed. Hand clean locally using alcohol based solution. Custom process sealed version available; contact factory. UL94V-0 rated actuator, housing and base The FR01 Series rotaries have not been tested for UL recognition or CSA certification. These switches are designed for use in a low-voltage, low-current circuit. When used as intended, the results do not produce hazardous energy. NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 05-08 10mm DIP Rotaries Series FR01 TYPICAL SWITCH ORDERING EXAMPLE FR K 01 MOUNTING 01 Through-hole ACTUATION F Screwdriver K Plastic Shaft S Dial (for Straight Terminals only) A Metal Shaft (for Optional Knobs) R 16 CIRCUITS R Real Coded (Orange Actuator) C Complement Coded (Yellow Actuator) S P PC TERMINALS PACKAGING P Straight H Right Angle Stick-Tubes: FR01F, FR01K, FR01S 50 Pieces/Stick FR01A 25 Pieces/Stick S Color not applicable to Actuator A BRACKET POSITIONS 10 Decimal B 16 Hexadecimal For Actuator A only With Bracket DESCRIPTION FOR TYPICAL ORDERING EXAMPLE FR01KR16P-S Plastic Shaft Hexadecimal Positions Real Coded Packaged in Stick-Tube Straight PC Terminals MOUNTING 01 Through-hole ACTUATION F Screwdriver Adjusted with a flat tipped screwdriver Actuators are fully rotational either clockwise or counterclockwise. Actuator Colors:Orange for real coded devices; Yellow for complement coded devices. AT4180 Optional Snap-on Knob Polyamide Black knob with transparent flange (2.1) .083 (9.6) .378 (0.8) .031 (6.7) .264 (4.0) .157 (0.8) .031 (1.1) .043 Install knob before mounting on PCB for right angle type; it should not be removed once mounted. When mounting, align slit in knob with arrowhead on actuator. NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 05-08 Series FR01 10mm DIP Rotaries ACTUATION K S Plastic Shaft Adjusted by hand or with flat tipped screwdriver A Dial Metal Shaft Knob options illustrated below with color choices Adjusted by hand or with flat tipped screwdriver Actuators are fully rotational and operate either clockwise or counterclockwise. Colors for Actuators K and S: Orange for real coded devices; Yellow for complement coded devices Mounting hardware is available if needed for models with Actuator A: Hexagon Nut AT513M, Locking Ring AT515M, and Lockwasher AT509; all are shown in the Accessories and Hardware section. OPTIONAL KNOBS FOR METAL SHAFT AT4103 Small Color Tipped AT433 Plain Black (19.0) Dia .748 (11.0) Dia .433 Material: Polyacetal Color: Black (13.0) .512 AT4104 Large Color Tipped (16.0) Dia .630 (9.5) Dia .374 Polyester Base: Black Polyamide Tip Colors: (9.5) .374 (14.3) .563 A, B, C, E, F, G, H (0.5) .020 (18.0) Dia .709 (11.0) Dia .433 Polyester Base: Black (9.5) .374 (15.8) .622 Polyamide Tip Colors: A, B, C, E, F, G, H (0.5) .020 (9.5) .374 (0.5) .020 Knob Orientation: When installed with shaft flat rotated 180° from bushing flat as shown in “Typical Switch Dimensions,” white line on cap points to Actuator Position 0 noted in truth tables below. Color Codes: A Black B White C Red E Yellow F Green G Blue H Gray TRUTH TABLES (CIRCUITS & POSITIONS) Actuator Position x = ON Terminal No. (Output) 10 Decimal 16 Hexadecimal 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 A B C D E F 1 R Real Coded Model Numbers: FR01FR, FR01KR, FR01SR, FR01AR C Complement Coded Model Numbers: FR01FC, FR01KC FR01SC, FR01AC 2 4 8 1 2 4 8 Terminal numbers are actually on the switch. Above sequence shown for clockwise rotation. NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 05-08 Series FR01 10mm DIP Rotaries TYPICAL SWITCH DIMENSIONS Straight PC • Screwdriver (0.2) .008 (10.0) .394 Decimal Hexadecimal 3 45 23 901 4 (2.54) Typ .100 8 (7.62) .300 (1.27) .050 (10.0) .394 Decimal Hexadecimal (0.8 ~ 1.0) Dia Typ .031 ~ .039 CL (2.1) .083 (10.0) .394 C 1 2 4 8 2 4 (2.54) Typ .100 8 C (2.54) .100 (0.8 ~ 1.0) Dia Typ .031 ~ .039 (1.27) .050 (3.3) .130 (0.5) Typ .020 (2.54) Typ .100 (3.25) .128 Straight PC • Plastic Shaft BCD 78 (10.0) .394 01 EF 2 (0.2) Typ .008 (7.62) .300 3 45 901 23 456 (10.0) .394 (2.1) .083 (0.2) .008 (0.2) .008 (2.54) Typ .100 8 4 2 1 Decimal 2 4 8 (7.0) (3.8) .276 .150 (0.5) Typ .020 (2.54) Typ .100 (7.62) .300 C (3.3) .130 FR01KR16P CL 1 C (3.8) .150 (10.0) .394 (10.0) .394 H 2 C (0.2) Typ .008 (2.54) .100 89 67 A P BCD 78 FR01FR10H 1 1 (3.8) Dia .150 (3.8) Dia .150 CL (2.75) .108 89 67 A (0.2) .008 (0.2) .008 1 (0.5) Typ .020 (3.8) .150 (10.0) .394 2 (3.8) .150 (10.0) .394 Right Angle PC • Screwdriver (10.0) .394 4 (3.3) .130 (3.8) Dia .150 456 8 C 01 EF 2 H BCD 78 456 FR01FC10P (2.54) Typ .100 (7.62) .300 3 45 (3.8) Dia .150 01 EF 2 (10.0) .394 23 (10.0) .394 901 (0.2) Typ .008 (2.1) .083 (0.2) .008 89 67 A P (1.27) .050 (0.8 ~ 1.0) Dia Typ .031 ~ .039 Hexadecimal Right Angle PC • Plastic Shaft (3.8) .150 3 45 23 901 FR01KC16H 01 EF 2 (0.2) .008 CL 89 67 A (10.0) .394 1 BCD 456 78 (10.0) .394 (2.75) .108 (2.1) .083 (3.8) .150 (0.2) .008 (10.0) .394 (10.0) .394 Decimal Hexadecimal (7.0) .276 (0.2) Typ .008 (2.54) .100 (3.25) .128 2 4 (2.54) Typ .100 8 C C 1 2 4 8 (1.27) .050 (3.3) .130 (2.54) .100 (0.8 ~ 1.0) Dia Typ .031 ~ .039 (0.5) Typ .020 (2.54) Typ .100 NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 05-08 Series FR01 10mm DIP Rotaries TYPICAL SWITCH DIMENSIONS Straight PC • Dial (10.0) .394 (9.8) Dia .386 (3.4) .134 (10.0) .394 Decimal FR01SR10P P (2.1) .083 (0.2) Typ .008 (3.0) .118 (0.2) .008 123 4 5 67 P CL (2.54) Typ .100 1 8 (7.62) .300 4 2 2 1 (7.62) .300 C C (1.27) .050 (3.3) .130 (7.2) .284 8 (0.8 ~ 1.0) Dia Typ .031 ~ .039 (0.5) Typ .020 Hexadecimal Straight PC • Metal Shaft (3.1) Dia .122 (0.6) Typ .024 Flat (0.4) Typ .016 (2.54) Typ .100 8 (11.0) .433 (7.62) .300 (11.6) .457 (13.1) .516 FR01AR10PB (2.28) .090 4 2 (6.1) .240 (0.2) Typ .008 C 4 8 (7.62) .300 C (1.27) .050 (12.7) .500 (0.5) Typ .020 (12.7) .500 (3.3) .130 (11.95) .470 2 1 M6 P0.75 (10.0) .394 (2.54) Typ .100 CL 1 H (2.54) Typ .100 4 (0.8 ~ 1.0) Dia Typ .031 ~ .039 Shown in Position 0 with shaft flat rotated 180° from bushing flat Right Angle PC • Metal Shaft (3.1) Dia .122 (11.0) .433 C 1 2 (5.5) .217 (2.28) .090 (11.6) .457 (13.1) .516 FR01AC16HB (0.4) Typ .016 M6 P0.75 1 4 8 (10.0) .394 (7.62) .300 (13.9) .547 (0.2) Typ .008 (2.54) .100 (3.3) .130 (12.7) .500 2 4 8 (7.62) .300 C Flat (0.6) Typ .024 (3.03) .119 (6.1) .240 (2.54) Typ .100 CL (0.5) Typ .020 (2.54) Typ .100 (1.27) .050 (12.7) .500 (2.54) .100 (0.8 ~ 1.0) Dia Typ .031 ~ .039 Shown in Position 0 with shaft flat rotated 180° from bushing flat NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 05-08 10mm DIP Rotaries Series FR01 PACKAGING S Stick-Tube FR01F, FR01K & FR01S Each stick-tube contains 50 switches. Switches must be ordered in 50-piece increments. FR01A Each stick-tube contains 25 switches. Switches must be ordered in 25-piece increments. Note: Transport and storage temperatures should not exceed 50°C (122°F). Store stick tubes on flat surface. FR01F with Screwdriver Actuation & Straight PC FR01K with Plastic Shaft & Right Angle PC (16.4) .646 (15.7) .618 (16.0) .630 (15.4) .606 (540.0) 21.260 (530.0) 20.866 FR01S with Dial Actuation & Straight PC (13.9) .547 (12.3) .484 (528.0) 20.787 FR01A with Metal Shaft & Straight PC FR01A with Metal Shaft & Right Angle PC (18.2) .717 (35.5) 1.398 (33.6) 1.323 (13.1) .516 (390.0) 15.354 (390.0) 15.354 NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 05-08