March 17, 2006 1.25Gbps Single Fiber Bi-directional GBIC Transceiver (For 10～40km point-to-point transmission, RoHS compliant) Members Of FlexonTM Family Standard Compatible with GBIC specification (SFF-8053), Rev 5.5 Compatible with IEEE 802.3z Compatible with IEEE 802.3ah Compatible with FCC 47 CFR Part 15, Class B Compatible with FDA 21 CFR 1040.10 and 1040.11, Class I RoHS compliant Features Description 1.25Gbps bi-direction data links Up to 10km and 40km point-point transmission 1310nm FP transmitter and 1550nm PIN receiver for FTM-9312S-G10G 1310nm DFB transmitter and 1550nm PIN receiver for FTM-9312S-G40G 1550nm DFB transmitter and 1310nm PIN receiver for FTM-9512S-S10G and FTM-9512S-S40G Class I laser product Low EMI and excellent ESD protection GBIC MSA package with single SC receptacle Detailed product information in EEPROM Operating case temperature: 0 ~70℃ Fiberxon 1.25G single fiber bi-directional GBIC transceivers are high performance, cost effective modules, which supports data rate of 1.25Gbps and transmission distance up to 10km and 40km. FTM-9312S-G10G/FTM-9312S-G40G is normally used in the client side (ONT), which transmits 1310nm optical signal and receives 1550nm optical signal. While FTM-9512S-G10G/ FTM-9512S-G40G is used in the central office side (OLT), which transmits 1550nm optical signal and receives 1310nm optical signal. The standard serial ID information compatible GBIC MSA Applications describes standard WDM Application Gigabit Ethernet Point-to-Point FTTX Application the interfaces, transceiver’s capabilities, manufacturer and other information. The host equipment can access this information via the 2-wire serial CMOS EEPROM protocol. For further information, please refer to GBIC MSA. Fiberxon 1.25G single fiber bi-directional GBIC transceivers are RoHS compliant. Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 1 of 10 Controlled Electronic Version. 24hrs Obsolete when printed out without authorization Last printed 2006-6-6 13:36 1.25gbps Single Fiber Bi-directional GBIC Transceiver 10～40km point-to-point transmission, RoHS compliant Preliminary Data Sheet March 17, 2006 Regulatory Compliance The transceivers have been tested according to American and European product safety and electromagnetic compatibility regulations (See Table 1). For further information regarding regulatory certification, please refer to FlexonTM regulatory specification and safety guidelines, or contact with Fiberxon, Inc. America sales office listed at the end of documentation. Table 1 - Regulatory Compliance Feature Standard Electrostatic Discharge MIL-STD-883E (ESD) to the Electrical Pins Method 3015.7 Electrostatic Discharge (ESD) IEC 61000-4-2 to the Duplex LC Receptacle GR-1089-CORE Performance Class 1(>500 V) Compatible with standards FCC Part 15 Class B Electromagnetic EN55022 Class B (CISPR 22B) Interference (EMI) Compatible with standards VCCI Class B Immunity Laser Eye Safety Component Recognition IEC 61000-4-3 Compatible with standards FDA 21CFR 1040.10 and 1040.11 Compatible with Class I laser EN60950, EN (IEC) 60825-1,2 product. UL and CSA Compatible with standards 2002/95/EC 4.1&4.2 RoHS Compliant with standards 2005/747/EC Absolute Maximum Ratings Absolute Maximum Ratings are those values beyond which damage to the devices may occur. Table 2 – Absolute Maximum Ratings Parameter Symbol Min. Max. Unit Storage Temperature TS -40 +85 °C Supply Voltage VCC -0.5 6.0 V - 5 95 % Operating Humidity Recommended Operating Conditions Table 3 - Recommended Operating Conditions Parameter Symbol Min. Operating Case Temperature TC Power Supply Voltage VCC Power Supply Current ICC Max. Unit 0 +70 °C 3.1 5.5 V 300 mA Data Rate Typical 1.25 Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Gbps Page 2 of 10 Controlled Electronic Version. 24hrs Obsolete when printed out without authorization Last printed 2006-6-6 13:36 1.25gbps Single Fiber Bi-directional GBIC Transceiver Preliminary Data Sheet 10～40km point-to-point transmission, RoHS compliant March 17, 2006 FTM-9312S-G10G (1310nm FP Tx/1550nm PIN Rx for ONU, 10km) Table 4 –Optical and Electrical Characteristics Parameter Symbol Min. Typical Max. Unit Notes Transmitter Centre Wavelength Average Optical Output Power λC 1260 1360 nm P0ut -9 -3 dBm -45 dBm 4 nm P0ut@TX Disable Asserted Spectral Width (RMS) ∆λ Extinction Ration EX Rise/Fall Time (20%~80%) tr /tf 0.26 ns TJ 345 ps Total Jitter 9 Output Optical Eye VIN 650 Input Differential Impedance ZIN 140 TX Disable 150 2 2000 mV 160 Ω 3 Disable 2.0 Vcc+0.3 V Enable 0 0.8 V Vcc-0.5 Vcc+0.3 V 0 0.5 V 1580 nm -20 dBm 4 4 Fault TX Fault dB IEEE 802.3z compliant Data Input Swing Differential 1 Normal Receiver Centre Wavelength λC 1480 Receiver Sensitivity Receiver Overload 0 dBm Return Loss 12 dB LOS De-Assert LOSD LOS Assert LOSA -21 -35 LOS Hysteresis dBm 0.5 4.5 dB 370 2000 mV High Vcc-0.5 Vcc+0.3 V Low 0 0.5 V Data Output Swing Differential LOS dBm VOUT 5 Note: 1. The optical power is launched into SMF. 2. Measured with a PRBS 27-1 test pattern @1.25Gbps. 3. CML input, internally AC coupled and terminated. 4. Worst-case Extinction Ration, measured with a PRBS 27 –1 test [email protected], BER≤1×10-12. 5. CML output, internally AC coupled. Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 3 of 10 Controlled Electronic Version. 24hrs Obsolete when printed out without authorization Last printed 2006-6-6 13:36 1.25gbps Single Fiber Bi-directional GBIC Transceiver Preliminary Data Sheet 10～40km point-to-point transmission, RoHS compliant March 17, 2006 FTM-9512S-G10G (1550nm DFB Tx/1310nm PIN Rx for OLT, 10km) Table 5 –Optical and Electrical Characteristics Parameter Symbol Min. Typical Max. Unit 1550 1580 nm -3 dBm -45 dBm 1 nm Notes Transmitter Centre Wavelength Average Output Power λC 1480 P0ut -9 P0ut@TX Disable Asserted Spectral Width (-20dB) ∆λ Extinction Ration EX Rise/Fall Time (20%~80%) tr /tf 0.26 ns TJ 345 ps Total Jitter 9 Output Optical Eye VIN 650 Input Differential Impedance ZIN 140 TX Disable 150 2 2000 mV 160 Ω 3 Disable 2.0 Vcc+0.3 V Enable 0 0.8 V Vcc-0.5 Vcc+0.3 V 0 0.5 V 1360 nm -20 dBm 4 4 Fault TX Fault dB IEEE 802.3z compliant Data Input Swing Differential 1 Normal Receiver Centre Wavelength λC 1260 Receiver Sensitivity Receiver Overload 0 dBm Return Loss 12 dB LOS De-Assert LOSD LOS Assert LOSA LOS Hysteresis -35 dBm dBm 0.5 4.5 dB 370 2000 mV High Vcc-0.5 Vcc+0.3 V Low 0 0.5 V Data Output Swing Differential LOS -21 VOUT Note: 1. The optical power is launched into SMF. 2. Measured with a PRBS 27-1 test pattern @1.25Gbps. 3. CML input, internally AC coupled and terminated. 4. Worst-case Extinction Ration, measured with a PRBS 27–1 test [email protected], BER≤1×10-12 5. CML output, internally AC coupled. Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 4 of 10 Controlled Electronic Version. 24hrs Obsolete when printed out without authorization Last printed 2006-6-6 13:36 5 1.25gbps Single Fiber Bi-directional GBIC Transceiver Preliminary Data Sheet 10～40km point-to-point transmission, RoHS compliant March 17, 2006 FTM-9312S-G40G (1310nm DFB Tx/1550nm PIN Rx for ONU, 40km) Table 6 –Optical and Electrical Characteristics Parameter Symbol Min. Typical Max. Unit 1310 1330 nm +3 dBm -45 dBm 1 nm Notes Transmitter Centre Wavelength Average Optical Output Power λC 1290 P0ut -2 P0ut@TX Disable Asserted Spectral Width (-20dB) ∆λ Extinction Ration EX Rise/Fall Time (20%~80%) tr /tf 0.26 ns TJ 345 ps Total Jitter 9 Output Optical Eye VIN 650 Input Differential Impedance ZIN 140 TX Disable 150 2 2000 mV 160 Ω 3 Disable 2.0 Vcc+0.3 V Enable 0 0.8 V Vcc-0.5 Vcc+0.3 V 0 0.5 V 1580 nm -23 dBm 4 4 Fault TX Fault dB IEEE 802.3z compliant Data Input Swing Differential 1 Normal Receiver Centre Wavelength λC 1480 Receiver Sensitivity Receiver Overload 0 dBm Return Loss 12 dB LOS De-Assert LOSD LOS Assert LOSA -24 -35 LOS Hysteresis dBm 0.5 4.5 dB 370 2000 mV High Vcc-0.5 Vcc+0.3 V Low 0 0.5 V Data Output Swing Differential LOS dBm VOUT 5 Note: 1. The optical power is launched into SMF. 2. Measured with a PRBS 27-1 test pattern @1.25Gbps. 3. CML input, internally AC coupled and terminated. 4. Worst-case Extinction Ration, measured with a PRBS 27 –1 test [email protected], BER≤1×10-12. 5. CML output, internally AC coupled. Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 5 of 10 Controlled Electronic Version. 24hrs Obsolete when printed out without authorization Last printed 2006-6-6 13:36 1.25gbps Single Fiber Bi-directional GBIC Transceiver Preliminary Data Sheet 10～40km point-to-point transmission, RoHS compliant March 17, 2006 FTM-9512S-G40G (1550nm DFB Tx/1310nm PIN Rx for OLT, 40km) Table 7 –Optical and Electrical Characteristics Parameter Symbol Min. Typical Max. Unit 1550 1580 nm +3 dBm -45 dBm 1 nm Notes Transmitter Centre Wavelength Average Output Power λC 1480 P0ut -2 P0ut@TX Disable Asserted Spectral Width (-20dB) ∆λ Extinction Ration EX Rise/Fall Time (20%~80%) tr /tf Total Jitter 9 dB TJ Output Optical Eye VIN 650 Input Differential Impedance ZIN 140 TX Disable ns 345 ps 150 2 2000 mV 160 Ω 3 Disable 2.0 Vcc+0.3 V Enable 0 0.8 V Vcc-0.5 Vcc+0.3 V 0 0.5 V 1360 nm -23 dBm 4 4 Fault TX Fault 0.26 IEEE 802.3z compliant Data Input Swing Differential 1 Normal Receiver Centre Wavelength λC 1260 Receiver Sensitivity Receiver Overload 0 dBm Return Loss 12 dB LOS De-Assert LOSD LOS Assert LOSA LOS Hysteresis -35 dBm dBm 0.5 4.5 dB 370 2000 mV High Vcc-0.5 Vcc+0.3 V Low 0 0.5 V Data Output Swing Differential LOS -24 VOUT Note: 1. The optical power is launched into SMF. 2. Measured with a PRBS 27-1 test pattern @1.25Gbps. 3. CML input, internally AC coupled and terminated. 4. Worst-case Extinction Ration, measured with a PRBS 27–1 test [email protected], BER≤1×10-12 5. CML output, internally AC coupled. Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 6 of 10 Controlled Electronic Version. 24hrs Obsolete when printed out without authorization Last printed 2006-6-6 13:36 5 1.25gbps Single Fiber Bi-directional GBIC Transceiver 10～40km point-to-point transmission, RoHS compliant Preliminary Data Sheet March 17, 2006 Recommended Interface Circuit Figure 1 shows the recommended interface circuit. Host Board GBIC Module Vcc Vcc 10K Ω 2×4.7K to 10KΩ TX Disable TX Fault Protocol IC SERDES IC SerDat Out + Z=75Ω TD + SerDat Out - Z=75Ω TD - SerDat In + Z=75Ω SerDat In - Z=75Ω Laser driver Fiber RD + Amplifier RD - LOS Vcc 3×4.7K to 10KΩ MOD-DEF2 EEPROM MOD-DEF1 MOD-DEF0 RGND Figure 1, Recommended Interface Circuit Pin Definitions Figure 2 below shows the pin numbering of GBIC electrical interface. The pin functions are described in Table 8 with the accompanying notes. Figure 2, Pin View Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 7 of 10 Controlled Electronic Version. 24hrs Obsolete when printed out without authorization Last printed 2006-6-6 13:36 1.25gbps Single Fiber Bi-directional GBIC Transceiver 10～40km point-to-point transmission, RoHS compliant Preliminary Data Sheet March 17, 2006 Table 8 – Pin Function Definitions Pin Name Pin # Name/Function Signal Specification RECEIVER SIGNALS RGND 2, 3, 11, 14 Receiver Ground Ground, to GBIC (may be connected with TGND in GBIC) Receiver +3.3/5 volt VDDR 15 -RX_DAT 12 Receive Data, Differential PECL +RX_DAT 13 Receive Data, Differential PECL Power, to GBIC (may be connected with VDDT in GBIC) High speed serial, from GBIC High speed serial, from GBIC Receiver Loss of Signal, logic high, open RX_LOS 1 collector compatible, 4.7k to 10kΩ pull up to Low speed, from GBIC VDDT on host TRANSMITTER SIGNALS TGND 8, 9, 17, 20 Transmitter Ground Ground, to GBIC (may be connected with RGND internally) Transmitter +3.3/5 volt VDDT 16 +TX_DAT 18 Transmit Data, Differential PECL -TX_DAT 19 Transmit Data, Differential PECL Power, to GBIC (may be connected with VDDR in GBIC) High speed serial, to GBIC High speed serial, to GBIC Transmitter Disable, logic high, open collector TX_DISABLE 7 compatible, 4.7k to 10kΩ pull up to VDDT on Low speed, to GBIC GBIC TX_FAULT 10 Transmitter Fault, logic high, open collector compatible, 4.7k to 10kΩ pull up to VDDT on host Low speed, from GBIC CONTROL SIGNALS MOD_DEF(0) 4 TTL low, output Please reference GBIC MOD_DEF(1) 5 SCL serial clock signal, input standard, Annex D: MOD_DEF(2) 6 SDA serial data signal, input/output Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Module definition “4” Page 8 of 10 Controlled Electronic Version. 24hrs Obsolete when printed out without authorization Last printed 2006-6-6 13:36 1.25gbps Single Fiber Bi-directional GBIC Transceiver 10～40km point-to-point transmission, RoHS compliant Preliminary Data Sheet March 17, 2006 Mechanical Design Diagram The mechanical design diagram is shown in Figure 3. Figure 3, Mechanical Design Diagram (Unit mm) Ordering information FTM 9 x 1 2 S x x G Others Distance G: RoHS Compliant 10: 10km 40: 40km Package G: GBIC Receptacle S: SC Wavelength 9: Multiwave in single fiber Function 3: 1310nm Tx/1550nm Rx 5: 1550nm Tx/1310nm Rx Data rate 12: 1.25Gbps Part No. G Product Description FTM-9312S-G10G 1310nm Tx/1550nm RX for ONU, 1.25Gbps, 10km, GBIC with SC receptacle, 0°C~+70°C FTM-9312S-G40G 1310nm Tx/1550nm RX for ONU, 1.25Gbps, 40km, GBIC with SC receptacle, 0°C~+70°C FTM-9512S-G10G 1550nm Tx/1310nm RX for OLT, 1.25Gbps, 10km, GBIC with SC receptacle, 0°C~+70°C FTM-9512S-G40G 1550nm Tx/1310nm RX for OLT, 1.25Gbps, 40km, GBIC with SC receptacle, 0°C~+70°C Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 9 of 10 Controlled Electronic Version. 24hrs Obsolete when printed out without authorization Last printed 2006-6-6 13:36 1.25gbps Single Fiber Bi-directional GBIC Transceiver 10～40km point-to-point transmission, RoHS compliant Preliminary Data Sheet March 17, 2006 Related Documents For further information, please refer to the following documents: ■ FlexonTM GBIC Installation Guide ■ SFF-8053, Proposed Specification for GBIC (Gigabit Interface Converter), Rev 5.5 Obtaining Document You can visit our website: http://www.fiberxon.com Or contact with Fiberxon, Inc. America Sales Office listed at the end of documentation to get the latest documents. Revision History Revision Rev. 1a Initiate Review Approve Univer.Yang Simon.Jiang Walker.Wei Subject Initial datasheet Release Date March 17, 2006 © Copyright Fiberxon Inc. 2006 All Rights Reserved. All information contained in this document is subject to change without notice. The products described in this document are NOT intended for use in implantation or other life support applications where malfunction may result in injury or death to persons. The information contained in this document does not affect or change Fiberxon’s product specifications or warranties. Nothing in this document shall operate as an express or implied license or indemnity under the intellectual property rights of Fiberxon or third parties. All information contained in this document was obtained in specific environments, and is presented as an illustration. The results obtained in other operating environment may vary. THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED ON AN ”AS IS” BASIS. In no event will Fiberxon be liable for damages arising directly from any use of the information contained in this document. Contact U.S.A. Headquarter: 5201 Great America Parkway, Suite 340 Santa Clara, CA 95054 U. S. A. Tel: 408-562-6288 Fax: 408-562-6289 Or visit our website: http://www.fiberxon.com Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 10 of 10 Controlled Electronic Version. 24hrs Obsolete when printed out without authorization Last printed 2006-6-6 13:36