F-213 FTSH–120–02–L–D TM FTSH–120–01–L–D–RA FTSH–125–01–F–D EXTENDED LIFE PRODUCT (1,27 mm) .050" 10 year Mixed Flowing Gas with 30µ" Gold Call Samtec for maximum cycles FTSH SERIES THROUGH-HOLE MICRO HEADER SPECIFICATIONS For complete specifications see www.samtec.com?FTSH Insulator Material: Black Liquid Crystal Polymer Terminal Material: Phosphor Bronze Plating: Sn or Au over 50µ" (1,27 µm) Ni Current Rating: 1.75A per contact @ 80°C ambient Operating Temp Range: -55°C to +125°C RoHS Compliant: Yes Impedance matched for high speed applications (Mated with CLP Series) Mates with: FFSD, FFTP, CLP, FLE, SFMC APPLICATION SPECIFIC OPTION (2,51 mm) .099" Molded Pick & Place pads available. Call Samtec. Mates with socket strips or IDC cable LOCKING CLIP FTSH 1 NO. PINS PER ROW LEAD STYLE 02 100 Note: See SFM/TFM for positive alignment feature. Note: Some sizes, styles and options are non-standard, non-returnable. Processing: Lead-Free Solderable: Yes 01 02 No. of positions x (1,27) .050 (3,05) .120 A –EP – 01 – 02 – 03 – 04 OPTION Z (3,05) .120 (1,91) .075 (1,65) .065 (3,81) .150 – ES (1,55) .061 (15,77) .621 (5,87) .231 (6,53) .257 – EJ – EP – EL (11,18) .440 –K (1,27) .050 (2,16) .085 (5,08) .200 –RA (3,20) .126 –EJ (2,29) .090 –K WWW.SAMTEC.COM –EJ = Ejector Shroud (Style –01 only) 10 pins/row min. 25 pins/row max. –RA not available –EL (2,29) .090 (1,27) .050 A = End Shroud with Board Lock (Style –02 & –03) 9 pins/row min. (0,40) .016 SQ (2,51) .099 LEAD STYLE –EP = End Shroud with Guide Post (Style –02 & –03) (1,91) .075 9 pins/row min. DIA (2,29) .090 (3,43) .135 –ES = End Shroud (Style –02 & –03) 9 pins/row min. –EL (3,05) .120 100 99 (1,27) .050 www.samtec.com = Right Angle = 10µ" (0,25 µm) Gold on post, Matte Tin on tail (3,43) .135 (1,27)01 .050 –RA –L (1,17) .046 OTHER OPTIONS Leave blank for straight tail = Gold flash on post, Matte Tin on tail 99 –EX OPTION SHOWN TAIL OPTION D –F No. of positions x (1,27) .050 + Z (4,78) .188 (1,27) .050 PLATING OPTION Specify LEAD STYLE from chart 02 thru 50 Note: Other Gold plating options available. Contact Samtec. Optional end shrouds and ejector shrouds Through-hole, right angle or Surface Mount FFSD STRIP ASSEMBLY For single mating LOCKING CLIP cycle with the PC FFSD. BOARD Specify -LC after tail option. Lead Styles -02 and -03, and 05 pins/row minimum. (1,27 mm) .050" micro pitch (2,29) .090 –ES –RA –ES (1,27) .050 = Keying Shroud (For mating with FFSD Style –01 only, 05-25 pins/row only and 13, 17, 20 & 25 only with shrouds)