® TAK CHEONG 350 mW DO-35 Hermetically Sealed Glass AFC / Trigger Diodes Absolute Maximum Ratings Symbol TA = 25°C unless otherwise noted Parameter PD Power Dissipation TSTG Storage Temperature Range TJ AXIAL LEAD DO35 Operating Junction Temperature DEVICE MARKING DIAGRAM Value Units 350 mW -65 to +200 °C +175 °C L 10 43 L = Logo Device Code = FV1043 These ratings are limiting values above which the serviceability of the diode may be impaired. Specification Features: DO-35 Package (JEDEC) LDB-3 DEVICE MARKING DIAGRAM Through-Hole Device Type Mounting Hermetically Sealed Glass Compression Bonded Construction L = Logo Device Code = DB3 All external surfaces are corrosion resistant and leads are readily solderable Cathode indicated by polarity band AFC-FV-1043 Electrical Characteristics TA = 25°C unless otherwise noted Limits Parameter Unit Test Condition Min Typical Max BV IR = 5µA 5 Volts Normal Capacitance VR = 5V 5 pF C 0.1 VR = 0.1V C 4.0 VR = 4.0V Q f = 100MHZ 1.8 50 March 2002 / A Page 1 AFC / TRIGGER DIODES SEM IC O N DU C TO R ® TAK CHEONG SEM IC O N DU C TO R Trigger - DB3 Electrical Characteristics TA = 25°C unless otherwise noted DB3 Parameter Unit Min Typical Max 28 32 36 Volts ±3 Volts VBO [VBO’-VBO] [∆V] 5 Volts VO 5 Volts IBO 100 TR µA 1.5 µS IB 10 Electrical Symbol Definition µA Typical Characteristics +IF Symbol Parameter BV Breakdown Voltage @ IR VBO Breakover Voltage @ IBO [VBO’-VBO] 10mA VBO Symmetry IBO [∆V] Dynamic Breakover Voltage VO Output Voltage IBO Breakover Current TR Rise Time IB Leakage Current IF Forward Current IB -V +V 0.5V ∆V VBO -IF Ordering Information Device Package Quantity FV-1043 / DB3 Bulk 10,000 FV-1043 / DB3.TB Tape and Ammo 5,000 FV-1043 / DB3.TR Tape and Reel 10,000 FV-1043 / DB3 Others (…contact sales representatives) Axial-Lead Tape Packaging Standards This axial-lead component’s packaging requirements use in automatic testing and assembly equipment. And this standard practices for lead-tape packaging of axial-lead components meets the requirements of EIA Standard RS-296-D “Lead-taping of Components on Axial Lead Configuration for Automatic Insertion”. March 2002 / A Page 2 ® TAK CHEONG SEM IC O N DU C TO R Tape & Reel Packaging Information Tape & Reel Outline Reel Dimensions DIM Millimeters D1 356 D2 30 D3 84 W1 77.5 PKG Type Quantity Per Reel DO-35 10,000 Quantity Per Reel March 2002 / A Page 3 ® TAK CHEONG SEM IC O N DU C TO R Tape & Ammo Packaging Information Tape & Ammo Outline 250mm x 80mm x 80mm Quantity Per Ammo Box PKG Type Quantity Per Box DO-35 5,000 Taping Dimensions Description Standard Width Millimeters 52 26 Tape Spacing (B) 52 ± 0.69 26 +0.5 / -0 Component Pitch (C) 5.08 ± 0.4 5.08 ± 0.4 ± 0.69 ± 0.69 Untaped Lead (L1 – L2) Glass Offset (F) Bent (D) Tape Width (G) Tape Mismatch (E) Taped Lead (G) Lead Beyond Tape (H) ± 0.69 ± 0.69 1.2 Max 1.2 Max 6.138 ± 0.576 6.138 ± 0.576 0.55 Max 0.55 Max 3.2 Min 3.2 Min 0 0 March 2002 / A Page 4 ® TAK CHEONG SEM IC O N DU C TO R Bulk Packaging Information Plastic Bag Quantity Per Plastic Bag Bulk Outline DO-35 1000 x 10 Plastic Bag 250mm x 80mm x 80mm PKG Type Quantity Per Box DO-35 10,000 Quantity Per Box March 2002 / A Page 5 ® TAK CHEONG SEM IC O N DU C TO R Package Outline Package Case Outline DO-35 DO-35 DIM Millimeters Inches Min Max Min Max A 0.46 0.55 0.018 0.022 B 3.05 5.08 0.120 0.200 C 25.40 38.10 1.000 1.500 D 1.53 2.28 0.060 0.090 Notes: 1. 2. All dimensions are within JEDEC standard. DO35 polarity denoted by cathode band. March 2002 / A Page 6