® SEM IC O N DU C TO R 500 mW DO-35 Hermetically Sealed Glass Small Signal Schottky Diodes AXIAL LEAD DO35 Absolute Maximum Ratings Symbol VRRM IF IFSM TSTG /TJ TA = 25°C unless otherwise noted Value Parameter Units DEVICE MARKING DIAGRAM 1N60 1N60P Peak Reverse Voltage 40 45 V Forward Continuous Current 30 50 mA Peak Forward Surge Current (t =1S) 150 500 mA Storage and Junction Temperature Range L 1N xxx L TC1Nxxxx : Logo : Device Code ℃ -65 to +125 These ratings are limiting values above which the serviceability of the diode may be impaired. Specification Features: DO-35 Package (JEDEC) Through-Hole Device Type Mounting Hermetically Sealed Glass Anode Cathode Compression Bonded Construction All External Surfaces Are Corrosion Resistant And Leads Are Readily Solderable RoHS Compliant ELECTRICAL SYMBOL Solder Hot Dip Tin (Sn) Terminal Finish. Cathode Indicated By Polarity Band Electrical Characteristics Symbol TA = 25°C unless otherwise noted Parameter Test Condition Limits Type Min IF=1mA VF IF=30mA IF=200mA Reverse Leakage Current CJ Junction Capacitance TRR Reverse Recovery Time Max 1N60 0.32 0.5 1N60P 0.24 0.5 1N60 0.65 1.0 Volts Volts Volts Forward Voltage IR Unit Typ VR=15V 1N60P 0.65 1.0 1N60 0.1 0.5 1N60P 0.5 1.0 uA VR=1V, f=1MHz 1N60 2.0 VR=10V, f=1MHz 1N60P 6.0 IF=IR=1mA, Rc=100Ω 1N60 Irr=1mA, pF 1 nS 1N60P Number: DB-046 May 2009 / B Page 1 TC1N60/TC1N60P TAK CHEONG ® TAK CHEONG SEM IC O N DU C TO R Package Outline Package Case Outline DO-35 DO-35 DIM Millimeters Inches Min Max Min Max A 0.46 0.55 0.018 0.022 B 3.05 5.08 0.120 0.200 C 25.40 38.10 1.000 1.500 D 1.53 2.28 0.060 0.090 Notes: 1. 2. All dimensions are within JEDEC standard. DO35 polarity denoted by cathode band. Number: DB-046 May 2009 / B Page 2 TAK CHEONG ® DISC LA I MER NOTIC E NOTICE The information presented in this document is for reference only. Tak Cheong reserves the right to make changes without notice for the specification of the products displayed herein. The product listed herein is designed to be used with ordinary electronic equipment or devices, and not designed to be used with equipment or devices which require high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), Tak Cheong Semiconductor Co., Ltd., or anyone on its behalf, assumes no responsibility or liability for any damagers resulting from such improper use of sale. This publication supersedes & replaces all information reviously supplied. For additional information, please visit our website http://www.takcheong.com, or consult your nearest Tak Cheong’s sales office for further assistance. Number: DB-100 April 14, 2008 / A