FX5545G005 Vishay Industry Smallest and Low Profile 5W 1.5A DC/DC Buck Converter with High Output Density Power FEATURES • Fully integrated DC/DC converter • High efficiency over large load range • 100% duty cycle • Power density - more than 100W/inch3 • 1uA shutdown current • 2.7V to 6V input range (1Li+ and 3-cell NiCd or NiMH cells) • 1.8V to 3.3V output voltage • Programmable PWM/PSM controls • Low output ripple • BGA/LGA construction • Temperature range: - 40°C to + 85°C • No external components needed • Output power 5W • Maximum current 1.5A • Low profile The DC/DC converter is a programmable topology synchronized Buck converter for today’s continuous changing portable electronic market. The DC/DC converter provides flexibility of utilizing various battery configurations and chemistries such as NiCd, NiMH, or Li+ with an input voltage range of 2.7V to 6V. An additional flexibility is provided with topology programmability to power multiple loads such as power amplifiers, microcontrollers, or baseband logic IC’s. For ultra-high efficiency, converters are designed to operate in sychronous rectified PWM mode under full load while transforming into externally controlled pulse-skipping mode (PSM) under light load. The DC/DC converter is available in 20-ports BGA package. In order to satisfy the stringent ambient temperature requirements, the DC/DC converter is designed to handle the industrial temperature range of - 40°C to + 85°C. APPLICATION • • • • • Cordless phones, PDAs and others Supply voltage source for low-voltage chip sets Portable computers Battery back-up supplies Cameras ORDERING INFORMATION FX 5545 G005 FUNCTION SIZE SERIAL NUMBER OUTPUT VOLTAGE-Example: 2.7V should be written as 2V7 as the V indicates the decimal point. Document Number: 10112 Revision 25-Feb-02 For technical questions, contact [email protected] For marketing questions, contact [email protected] www.vishay.com 1 FX5545G005 Vishay 0.48 ± 0.01 [12.2 ± 0.25] A 0.1 ± 0.01 [2.54 ± 0.25] B 0.09 ± 0.01 [2.29 ± 0.25] C 0.09 ± 0.01 [2.27 ± 0.25] T 0.12 max [3 max] A W W L 0.58 ± 0.01 [14.7 ± 0.25] C A T L B DIMENSIONS in inches [millimeters] PIN CONFIGURATION 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 Marked on Upper Side RECOMMENDED PAD PATTERN in inches [millimeters] PIN 1, 2 3, 7 4, 8 5, 9 6, 10 11, 12 13, 17 14, 18 15, 19 16, 20 CONNECTION SD SYNC N/C Vin PWM/PSM N/C GND Vout N/C GND A BOTTOM SIDE D A D F 0.1 ± 0.01 [2.54 ± 0.25] 0.03 ± 0.001 [0.8 ± 0.02] 0.02 ± 0.001 [0.5 ± 0.02] www.vishay.com 2 For technical questions, contact [email protected] For marketing questions, contact [email protected] F A Document Number: 10112 Revision 25-Feb-02 FX5545G005 Vishay STANDARD ELECTRICAL SPECIFICATIONS PARAMETER UNIT Input Voltage Range VDC Insulation Test Voltage Resistance Leakage Current VAC Ω nA Output Power Voltage Temp. Coefficient Ripple and Noise W VDC %/°C mVpp General Package Weight gr. Temperature Operation Storage °C °C CONDITION MIN TYP MAX 2.7 60Hz 60sec VISO = 500VDC VISO = 500VDC 6 750 1 x 1011 5 5 1.8 to 3.3 0.03 DC to 20MHz 100 1.5 - 40 - 55 Vout Vs. Iout + 85 + 125 Vout Vs. Vin 3.5 3.5 3.45 3.45 3.4 3.4 3.35 3.35 3.3 3.3 Vout (V) Vout (V) Vin = 3.6V 3.25 3.2 Iout = 0.5A Iout = 1.5A 3.25 3.2 3.15 3.15 3.1 3.1 3.05 3.05 3 3 0 0.5 1 1.5 3 2 4 5 6 Vin (V) Iout (A) ∆ Temp. Vs. Iout Efficiency Vs. Iout Above 25°C Ambient Temperature; For Vout = 3.3V; Vin = 6V Vout = 3.3V; Vin = 3.6V 30 100 90 25 Efficiency (%) 80 ∆ Temp (°C) 20 15 10 70 60 50 40 30 20 5 10 0 0 0 0.5 1 1.5 Iout (A) Document Number: 10112 Revision 25-Feb-02 2 0 0.5 1 1.5 2 Iout (A) For technical questions, contact [email protected] For marketing questions, contact [email protected] www.vishay.com 3