FX5545G402 Vishay Industry Smallest and Low Profile 5W 1A DC/DC Boost Converter with High Output Density Power FEATURES • Fully integrated DC/DC converter • High efficiency over large load range • 2MHz switching frequency • 100% duty cycle • Power density - more than 150W/inch3 • 1uA shutdown current • 2.5V to 6V input range (1Li+ and 3-cell NiCd or NiMH cells) • 3.3V to 6V output voltage • Programmable PWM/PSM controls • Low output ripple • BGA/LGA construction • Temperature range: - 40°C to + 85°C • No external components needed • Output power 5W. • Maximum current 1000mA • Low profile The DC/DC converter provides fully integrated synchronous boost converter solution for the latest one-cell lithium ion cellular phones. Its input voltage is between 2.5V to 6V, capable of delivering 1000mA of output current at 3.3V to 6V. The DC/DC converter combines the 2MHz-switching controller with fully integrated passive components needed to deliver the smallest and most efficient converter available today. The high switching frequency minimizes the output capacitance with peak to peak output ripple as low as 20mV. The DC/DC converter delivers efficiency up to 95%. The programmable pulse-skipping mode (PSM) maintains this high efficiency even during the standby and idle modes to increase overall battery life and talktime. In order to extract the last ounce of power from the battery, the DC/DC converter is designed with 100% duty cycle control for this mode. This function enables the DC/DC converter to operate like a saturated linear regulator delivering the highest potential output voltage for longer talk time. The DC/DC converter is available in 20-ports BGA package. In order to satisfy the stringent ambient temperature requirements, the DC/DC converter is designed to handle the industrial temperature range of - 40°C to + 85°C. APPLICATION • • • • • • • • • Cordless phones, PDAs and others Supply voltage source for low voltage chip sets Portable computers Battery back-up supplies Cameras Routers Fiber optics LANS Image processing ORDERING INFORMATION FX 5545 G402 FUNCTION SIZE CIRCUIT IDENTIFIER OUTPUT VOLTAGE-Example: 5.0V should be written as 5V0 as the V indicates the decimal point, or ADJ for adjustable version - self selectable output voltage. PACKAGING-B1 = 10pcs in bulk; B5 = 50pcs in bulk; T1 = 13” reel; T2 = 7” reel. Document Number: 10110 Revision 13-Mar-03 For technical questions, contact [email protected] For marketing questions, contact [email protected] www.vishay.com 17 FX5545G402 Vishay DIMENSIONS in inches [millimeters] A 0.1 ± 0.01 [2.54 ± 0.25] B 0.09 ± 0.01 [2.29 ± 0.25] C 0.09 ± 0.01 [2.27 ± 0.25] T 0.12 max [3 max] A 0.48 ± 0.01 [12.2 ± 0.25] B W W L 0.58 ± 0.01 [14.7 ± 0.25] C A T L PIN CONFIGURATION (Bottom Side)* 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 Marked on Upper Side *Note: Pin Description application note is available on page 32. RECOMMENDED PAD PATTERN in inches [millimeters] CONNECTION N/C SD PWM/PSM SYNC Vout N/C GND N/C N/C Vin A BOTTOM SIDE PIN 1 2, 6 3, 7 4, 8 5, 9 10 - 12 13, 17 14 - 16 18 19, 20 D A D F 0.1 ± 0.01 [2.54 ± 0.25] 0.03 ± 0.001 [0.8 ± 0.02] 0.02 ± 0.001 [0.5 ± 0.02] F A TAPE AND REEL See Tape and Reel Information - Type B www.vishay.com 18 For technical questions, contact [email protected] For marketing questions, contact [email protected] Document Number: 10110 Revision 13-Mar-03 FX5545G402 Vishay STANDARD ELECTRICAL SPECIFICATIONS PARAMETER UNIT CONDITION Input Voltage Range Quiescent Current Soft Start Time VDC A ms PSM mode TSS SD, PWM/PSM, SYNC Logic High Logic Low Normal Mode PSM Mode Shutdown Mode Shutdown Time V V A A A ms VH VL IDD IDD IDD TSS 2.4 Insulation Test Voltage Resistance Leakage Current VAC Ω nA 60Hz 60sec VISO = 500VDC VISO = 500VDC 750 1 x 1011 Output Power Voltage Voltage Tolerance Temp. Coefficient Ripple and Noise W VDC % %/°C mVpp General Package Weight MIN TYP 2.5 6 200 19 0.8 750 250 1 17 5 5 3.3 to 6 at 25°C Ambient Temperature -3 +3 0.03 DC to 20MHz 50 gr. Oscillator Frequency SYNC Range 1.5 MHz 2 Fsync/FOSC Temperature Operation Storage Operating Junction Temp. Thermal Impedance MAX °C °C °C °C/WD* 1.2 1.5 - 40 - 55 + 85 + 125 Tj θJA 150 82 Note: WD = Power Dissipated Rise Time Fall Time Rise Time (PWM mode): Vin = 3.5V; Vout = 5V; Iout = 1A Fall Time (PWM mode): Vin = 3.5V; Vout = 5V; Iout = 1A Document Number: 10110 Revision 13-Mar-03 For technical questions, contact [email protected] For marketing questions, contact [email protected] www.vishay.com 19 FX5545G402 Vishay Vout Vs. Vin Vout Vs. Iout Iout = 1000mA 5.5 5.4 5.3 5.2 5.1 5 4.9 4.8 4.7 4.6 4.5 6 5.8 5.6 Vout (V) Vout (V) Vin = 3.5V; Vout = 5.0V 0 0.2 0.4 0.6 0.8 1 5.4 5.2 5 4.8 4.6 4.4 4.2 4 2 1.2 3 4 ∆ Temp Vs. Iout Efficiency Vs. Iout Above 25°C Ambient Temperature Vin = 3.5; Vout = 5.0V 60 Efficiency (%) ∆ Temp (°C) 50 40 30 Vin = 2.7V 20 Vin = 3.5V 10 6 100 95 90 85 80 75 70 65 60 55 50 0 0 0.2 0.4 0.6 0.8 0 1.2 1 0.2 0.4 Iout (A) 0.6 0.8 1 1.2 Iout (A) Vout Vs. Vin (PSM mode) Vout Vs. lout (PSM mode) lout = 0.1A Vin = 3V 5.2 5.2 5.15 5.15 5.1 Vout (V) 5.1 Vout (V) 5 Vin (V) Iout (A) 5.05 5 5.05 5 4.95 4.95 4.9 4.9 4.85 4.85 4.8 4.8 2 2.5 3 3.5 Vin (V) 4 4.5 0 5 0.05 0.1 0.15 0.2 0.25 Iout (A) Efficiency Vs. Iout (PSM mode) 90 Vin = 4V 80 Vin = 3V 70 Vout (V) 60 50 40 30 20 10 0 0 0.05 0.1 0.15 0.2 0.25 Iout (A) www.vishay.com 20 For technical questions, contact [email protected] For marketing questions, contact [email protected] Document Number: 10110 Revision 13-Mar-03