HIGH POWER FYLP FYLP- 0.5W 0.5W-UW Features: Long operating life Highest flux Available in White Lambertian radiation pattern More energy efficient than incandescent and most halogen lamps Low voltage DC operated Cool beam,safe to the touch Instant light (less than 100ns) Fully dimmable No UV Superior ESD protection Eutectic die band,lower Rth. ROHS compliant –Lead-free Instant light (less than 100ns) Radiation Pattern Relative Lumionous Intensity(LOP @max=1) Applications Reading lights (car,bus,aircraft) Portable(flashlight,bicycle). orientation Mini-accent Decorative Fiber optic alternative Appliance Sign and channel letter Architectural detail Cove lighting Automotive exterior ( stop-Tail-turn,CHMSL,Mirror side repeat) Edge-lit signs(Exit,point of sale) Package Dimensions HIGH POWER Typical Optical/Electrical Characteristics@TJ=25℃ Item symbol Condition Min Typ Max Unit 3.0 - 3.6 V 50 uA Forward Voltage VF IF=150mA Reverse Current IR VR=5V 50% Power Angle 2θ1/2 IF=150mA 65 70 75 deg Luminous Intensity Фv IF=150mA 20 25 -- LM Recommend Forward Current IF Chromaticiyt coordinates X Y Thermal Resistance, Junction to Case Rjp 150 mA 0.30 IF=150mA 0.30 IF=150mA 10 ℃/W Notes: 1. Tolerance of measurement of forward voltage±0.1v 2. Tolerance of measurement of peak Wavelength ±2.0nm 3. Tolerance of measurement of luminous intensity ±15%. Absolute Maximum Rating Item Forward Current Peak Forward Current* Reverse Voltage Power Dissipation Electrostatic discharge Operation Temperature Storage Temperature Lead Soldering Temperature* symbol Absolute Maximum Rating Unit IF IFD VR PD ESD TOPR TSTG TSOL 150 300 5 500 ±4500 mA mA V mW V -30℃ to +80℃ -40℃ to +100℃ 260℃ for 3 Seconds Max IFP Conditions :Pulse Width≤10 msec duty≤1/10 All high Power emitter LED products mounted on aluminum metal-core printed circuit board, can be lighted directly ,but we do not recommend lighting the high power products for more than 5 seconds without a directly,but we do not recommend lighting the high powe products for more than 5 seconds without a appropriate heat dissipation equipment. Re-flow, wave peak and soak-stannum soldering etc. is not suitable for this products. Sueggest to solder it by professional high power LED soldering machine. Can use invariable –temperature searing-iron with soldering condition: ≤260 degreen less than 3 seconds. HIGH POWER Typical optical/Electrical Characteristics Curves (Tj=25℃ Unless Otherwise Noted)