IEC Load Switches Bulletin 194E 25 Amps to 100 Amps Features • • • • • • • • • • • • Description Bulletin 194E load switches are designed for use as local motor isolation and IEC disconnect switch applications outside North America. Available with 3- and 6-pole versions with add-on additional poles, grounding and neutral terminals and auxiliary contacts, Bulletin 194Es share the same operating handles as the Bulletin 194L Control and Load Switches. Bulletin 194E switches are offered in two mounting styles, Front/ Door and Base/DIN configurations for a variety of installations. Switch body styles for Bulletin 194E base-mounted switches include standard interlock shaft; Bulletin 194E front-mounted switches include standard shaft. Two-position OFF-ON switch is used to connect or disconnect a variety of inductive loads, including solenoids, actuators, valves, magnetic starters, relays, and motors. Actuators featuring marked legend plates are available in SelectorKnob, Disk-Style, Rectangular-Style and Key-Operated versions. Selector-Knob versions are available in three sizes. Most actuators are available in colours of Gray/Black or Red/Yellow and have padlockable versions. 10-2 At-Motor Disconnect Switch 25, 32, 40, 63, 80, 100 A Inductive Load-Rated Switches IP65/Type 1/3/3R/12 Operating Handles IP2LX Finger-Safe Terminals 3- and 6-Pole Versions; Add-on Accessory Poles to Make 4-, 5-, 7- and 8-Pole Units Front/Door or DIN/Base Mounting Configurations Change over Switches OFF-ON Configurations 3- and 6-Pole Enclosed Switches Optional Thermoplastic Enclosures Positive-Guided Actuation Suitable as Motor Disconnect Conformity to Standards • IEC 207 • IEC 947-1 • IEC 947-3 low-voltage switch gear and control gear part 3: switches, disconnecters, switch-disconnecters and fusecombination units. CE marked for all applicable directives. • UL 508: Industrial Control Equipment. cUL, 1999 edition • CSA: C22.2 No. 14: Industrial Control Equipment Approvals • UL listed (file number E54612 NLRV) • CSA certified (LR 13002) • Meets IEC, VDE and BS standard requirements • IEC/CE marked for all applicable directives (per EN 60947-3) • R.I.Na.—Italian Naval Registry Your order must include: • Catalogue Number of switch body • Catalogue Number of actuator • If required, Catalogue Number of accessories IEC Load Switches Bulletin 194E 25 Amps to 100 Amps Product Selection OFF-ON Base-Mounted 3-Pole Switch (includes operating shaft) (Actuators listed on pages 10-4 and 10-5) Switch Body (Includes Shaft) Function Switching Angle Contact Target Configuration X = Contact Closed O = Contact Open Handle Position ON/1 OFF/0 No. of Circuits ON 1 1 2 3 OFF 0 O O O X X X Maximum Load Rating (A) AC23A Rated Power [kW] at 690V AC 50 Hz HP @ 480V AC 60 Hz 3 ∅ Catalogue Number 25 11 10 194E-A25-1753 32 15 15 194E-A32-1753 40 18.5 20 194E-A40-1753 63 22 25 194E-A63-1753 80 37 50 194E-A80-1753 100 45 50 194E-A100-1753 O 90 OFF-ON Front-Mounted 3-Pole Switch (includes operating shaft) (Actuators listed on pages 10-4 and 10-5) ON 1 OFF 0 1 2 3 O O O X X X 25 11 10 194E-E25-1753 32 15 15 194E-E32-1753 40 18.5 20 194E-E40-1753 63 22 25 194E-E63-1753 80 37 50 194E-E80-1753 100 45 50 194E-E100-1753 O 90 OFF-ON Base-Mounted 6-Pole Switch (includes operating shaft) (Actuators listed on pages 10-4 and 10-5) ON 1 OFF 0 O 90 1 2 3 4 5 6 O O O O O O X X X X X X 25 11 10 194E-A25-1756 32 15 15 194E-A32-1756 40 18.5 20 194E-A40-1756 63 22 25 194E-A63-1756 80 37 50 194E-A80-1756 100 45 50 194E-A100-1756 OFF-ON Front-Mounted 6-Pole Switch (includes operating shaft) (Actuators listed on pages 10-4 and 10-5) ON 1 OFF 0 O 90 1 2 3 4 5 6 O O O O O O X X X X X X 25 11 10 194E-E25-1756 32 15 15 194E-E32-1756 40 18.5 20 194E-E40-1756 63 22 25 194E-E63-1756 80 37 50 194E-E80-1756 100 45 50 194E-E100-1756 10-3 IEC Load Switches Bulletin 194E 25 Amps to 100 Amps Product Selection OFF-ON Base/Front-Mounted 3- and 6-Pole Switches (continued) (Switch Body listed on page 10-3) Actuators with Screw Fixing (Includes Legend Plate and Control Knob) Rating IP65 Colour Black/Gray Type A IP65 Red/Yellow Type I IP65 Type S Accessories — Page 10-11 Specifications — Page 10-17 Approximate Dimensions — Page 10-19 10-4 194E-25…100A 88 mm x 88 mm (3-15/32in x 3-15/32in) 194E-40…100A 48 mm x 48 mm (1-57/64in x 1-57/64in) 194E-25…63A 64 mm x 64 mm (2-33/64in x 2-33/64in) 194E-25…100A 88 mm x 88 mm (3-15/32in x 3-15/32in) 194E-40…100A 48 mm x 48 mm (1-57/64in x 1-57/64in) 194E-25…63A 64 mm x 64 mm (2-33/64in x 2-33/64in) 194E-25…100A 48 mm x 48 mm (1-57/64in x 1-57/64in) 194E-25…63A 64 mm x 64 mm (2-33/64in x 2-33/64in) 194E-25…100A 67 mm x 67 mm (2-41/64in x 2-41/64in) OFF-ON 194L-HE4A-175I 0-1 194L-HE6A-175 OFF-ON 194L-HE6A-175I 0-1 194L-HE8A-175 OFF-ON 194L-HE8A-175I 0-1 194L-HE4I-175 OFF-ON 194L-HE4I-175I 0-1 194L-HE6I-175 OFF-ON 194L-HE6I-175I 0-1 194L-HE8I-175 OFF-ON 194L-HE8I-175I 0-1 194L-HE4E-175 OFF-ON 194L-HE4E-175I 0-1 194L-HE6E-175 OFF-ON 194L-HE6E-175I 0-1 194L-HE4L-175 OFF-ON 194L-HE4L-175I 0-1 194L-HE6L-175 OFF-ON 194L-HE6L-175I 194E-25…100A 0-1 OFF-ON 194L-HE6G-175 88 mm x 88 mm (3-15/32in x 3-15/32in) 194E-40…100A 0-1 OFF-ON 194L-HE8G-175 67 mm x 67 mm (2-41/64in x 2-41/64in) 194E-25…100A 0-1 OFF-ON 194L-HE6N-175 90 mm x 90 mm (3-35/64in x 3-35/64in) 194E-40…100A 0-1 OFF-ON 194L-HE8N-175 48 mm x 62 mm (1-57/64in x 2-7/16in) 0-1 194L-HE4S-175 194E-25…63A OFF-ON 194L-HE4S-175I 64 mm x 78 mm (2-33/64in x 3-5/64in) 0-1 194L-HE6S-175 194E-25…100A OFF-ON 194L-HE6S-175I Red/Yellow Type N IP65 64 mm x 64 mm (2-33/64in x 2-33/64in) Catalogue Number 194L-HE4A-175 Black/Gray Type G IP65 Type 3/3R/12 194E-25…63A Legend Marking 0-1 Red/Yellow Type L with Locking for One Padlock (Padlock Not Included) IP65 Type 3/3R/12 48 mm x 48 mm (1-57/64in x 1-57/64in) Black/Gray Type E with Locking for One Padlock (Padlock Not Included) IP65 Legend Plate Size Use with Catalogue Number Black/Gray IEC Load Switches Bulletin 194E 25 Amps to 100 Amps Product Selection OFF-ON Front-Mounted 3- and 6-Pole Switches (continued) (Switch Body listed on page 10-3) Actuators with Central Fixing (Includes Legend Plate & Control Knob)➊ Rating IP65 Colour Black/Gray Legend Plate Size 48 mm x 48 mm (1-57/64in x 1-57/64in) Use with Catalogue Number Red/Yellow 48 mm x 48 mm (1-57/64in x 1-57/64in) Catalogue Number 0-1 194L-HC4A-175 OFF-ON 194L-HC4A-175I 0-1 194L-HC4I-175 OFF-ON 194L-HC4I-175I 0-1 194L-HC4E-175 OFF-ON 194L-HC4E-175I 0-1 194L-HC4L-175 OFF-ON 194L-HC4L-175I 194E-E25…63A Type A IP65 Legend Marking 194E-E25…63A Type I IP65 Black/Gray 48 mm x 48 mm (1-57/64in x 1-57/64in) 194E-E25…63A Type E with Locking (Padlock not Included) IP65 Red/Yellow 48 mm x 48 mm (1-57/64in x 1-57/64in) Type L with Locking (Padlock not Included) 194E-E25…63A ➊ Use central-mounted handles with Catalogue Number 194E…switches. Accessories — Page 10-11 Specifications — Page 10-17 Approximate Dimensions — Page 10-19 10-5 IEC Load Switches Bulletin 194E 25 Amps to 100 Amps Product Selection OFF-ON Front-Mounted 3- and 6-Pole Switches (continued) (Switch Body listed on page 10-3) 194L/194E Disk Actuators with Central Fixing (Type G, N) — Size 6 Rating Colour Use with Catalogue Number Legend Plate Size Black/ Gray IP65 Type 3/3R/12 67 mm x 67 mm (2-33/64in x 2-33/64in) Legend Marking Catalogue Number 0-1 OFF-ON 194L-HC6G-175 0-1 OFF-ON 194L-HC6N-175 194L-E25…100 Red/ Yellow Type G, N 194L/194E Central Fixing Actuators (Type B, D) Description Central-Mounting Actuators (IP65) Handle Style: Knob Lever with Latch (Use with Catalogue Number 194E-E25-100-1753) Pkg. Qty. Catalogue Number 1 194L-HCB-001 Type B Key Removal Position (Includes Latch) — Central Fixing Use with Catalogue Number 194L-E25-100-1753 194L-HCDC-001 Key Removal Position (Includes Latch) — Central Fixing Use with Catalogue Number 194L-E25-100-1753 194L-HCDD-001 1 Key Removal Position (Includes Latch) — Central Fixing Use with Catalogue Number 194L-E25-100-1753 Key Removal Position (Includes Latch) — Central Fixing Use with Catalogue Number 194L-E25-100-1753 Type D 3-Position Front-Mounted Change over Switch (Includes Shaft) Contact Target Configuration X=Contact Closed O=Contact Open Handle Position Function 1 0 2 Switch Body Switching No. of (Includes Shaft) Angle Circuits 0 1 90 O 2 Accessories — Page 10-11 Specifications — Page 10-17 Approximate Dimensions — Page 10-19 10-6 194L-HCDG-001 194L-HCDH-001 Maximum Load Rating (A) AC23A Rated Power [kW] at 690V AC 50 Hz. HP @ 480V AC 60 Hz, 3∅ Catalogue Number 1 X O O 25 11 10 194E-A25-3753 2 X O O 32 15 15 194E-A32-3753 3 X O O 40 18.5 20 194E-A40-3753 4 O O X 63 22 25 194E-A63-3753 5 O O X 80 37 50 194E-A80-3753 6 O O X 100 45 50 194E-A100-3753 IEC Load Switches Bulletin 194E 25 Amps to 100 Amps Product Selection OFF-ON Front-Mounted 3- and 6-Pole Switches (continued) (Switch Body listed on page 10-3) 3-Position Change over Switch, Door Mount (includes operating shaft Contact Target Configuration X=Contact Closed O=Contact Open Handle Position Function No. of 1 0 2 Switch Body Switching Cir(Includes Shaft) Angle cuits ) Maximum Load Rating (A) AC23A Rated Power [kW] at 690V AC 50 Hz. HP @ 480V AC 60 Hz, 3∅ Catalogue Number 1 X O O 25 11 10 194E-E25-3753 2 X O O 32 15 15 194E-E32-3753 3 X O O 40 18.5 20 194E-E40-3753 4 O O X 63 22 25 194E-E63-3753 5 O O X 80 37 50 194E-E80-3753 6 O O X 100 45 50 194E-E100-3753 Use with Catalogue Number Legend Marking Catalogue Number 48 mm x 48 mm (1-57/64in x 1-57/64in) 194E-25…63-3753 I-O-2 194L-HE4A-375 64 mm x 64 mm (2-33/64in x 2-33/64in) 194E-25…100-3753 I-O-2 194L-HE6A-375 0 1 90 Actuators for Change over Switches Actuators with Screw Fixing (Includes Legend Plate & Control Knob) O 2 Rating Colour IP65 Legend Plate Size Black/Gray Base-Mounting Distribution Switches Imax [A] AC23A Rated Power [kW] at 690V AC HP @ 480V AC 60 Hz, 3∅ 25 11 10 Contact Target Function No. of Switching CirAngle cuits OFF/0 1 ON 1 OFF 0 90 O O ON/ 1 Colour Marking Lockable (one padlock) X Red/ Yellow O-1 No 2 O X Black/Gray O-1 Yes 3 O X Red/ Yellow O-1 No 194E-A25-1753-R 194E-A25-1753-Q 194E-A32-1753-R 32 Black/Gray O-1 Yes Catalogue Number 15 15 194E-A32-1753-Q 10-7 IEC Load Switches Bulletin 194E 25 Amps to 100 Amps Product Selection Enclosed Switch with Catalogue Number 194L-HE6N-175 Operating Handle and Thermoplastic Enclosure No. of Poles Function Switching Angle 3 ON 1 OFF 0 Uses BaseMounted Switches O 90 6 Maximum Load Rating (A) 25 32 40 63 80 100 25 32 40 63 Colour Red/Yellow Red/Yellow Catalogue Number 194E-Y25-1753-6N 194E-Y32-1753-6N 194E-Y40-1753-6N 194E-Y63-1753-6N 194E-Y80-1753-6N 194E-Y100-1753-6N 194E-Y25-1756-6N 194E-Y32-1756-6N 194E-Y40-1756-6N 194E-Y63-1756-6N OFF-ON Base-Mounted 3-Pole Switch with Catalogue Number 194L-HE6N-175 Red/Yellow Actuator Kits Function Switching Angle ON 1 OFF 0 Maximum Load Rating (A) AC23A Rated Power [kW] at 690V AC HP @ 480V AC 60 Hz, 3 ∅ Catalogue Number 25 7.5 10 194E-A25-1753-6N 32 11 15 194E-A32-1753-6N 40 15 20 194E-A40-1753-6N 63 18.5 25 194E-A63-1753-6N 80 30 50 194E-A80-1753-6N 100 37 50 194E-A100-1753-6N O 90 Type N OFF-ON Front-Mounted 3-Pole Switch with Catalogue Number 194L-HE6N-175 Red/Yellow Actuator Kits Function Switching Angle ON 1 OFF 0 O 90 Type N Accessories — Page 10-11 Specifications — Page 10-17 Approximate Dimensions — Page 10-19 10-8 Maximum Load Rating (A) AC23A Rated Power [kW] at 690V AC HP @ 480V AC 60 Hz, 3 ∅ Catalogue Number 25 7.5 10 194E-E25-1753-6N 32 11 15 194E-E32-1753-6N 40 15 20 194E-E40-1753-6N 63 18.5 25 194E-E63-1753-6N 80 30 50 194E-E80-1753-6N 100 37 50 194E-E100-1753-6N IEC Load Switches Bulletin 194E 25 Amps to 100 Amps Product Selection (continued) Enclosed Disconnect Load Switches — 3-Pole Base-Mounted Stainless Steel Enclosures IP66/Type 4/4X Maximum Load Rating (A) Ref. Dim. Page 25 A1 32 A1 40 A1 63 A1 80 B1 100 B1 Painted Steel Enclosures IP66/Type 3/4/12 — 3-Pole Base-Mounted Maximum Load Rating (A) Ref. Dim. Page 25 A1 32 A1 40 A1 63 A1 80 B1 100 B1 Non-Metallic Enclosures IP66/Type 3/4/4X — 3-Pole Base-Mounted Maximum Load Rating (A) Ref. Dim. Page 25 C1 32 C1 40 C1 63 C1 80 D1 100 D1 Handle Colour Black Red/Yellow Black Red/Yellow Black Red/Yellow Black Red/Yellow Black Red/Yellow Black Red/Yellow Catalogue Number ➊ 194E-CA20 194E-CA20E 194E-CA32 194E-CA32E 194E-CA40 194E-CA40E 194E-CA63 194E-CA63E 194E-CA80 194E-CA80E 194E-CA00 194E-CA00E Handle Colour Black Red/Yellow Black Red/Yellow Black Red/Yellow Black Red/Yellow Black Red/Yellow Black Red/Yellow Catalogue Number ➊ 194E-FA20 194E-FA20E 194E-FA32 194E-FA32E 194E-FA40 194E-FA40E 194E-FA63 194E-FA63E 194E-FA80 194E-FA80E 194E-FA00 194E-FA00E Handle Colour Black Red/Yellow Black Red/Yellow Black Red/Yellow Black Red/Yellow Black Red/Yellow Black Red/Yellow Catalogue Number ➊ 194E-KA20 194E-KA20E 194E-KA32 194E-KA32E 194E-KA40 194E-KA40E 194E-KA63 194E-KA63E 194E-KA80 194E-KA80E 194E-KA00 194E-KA00E ➊ Modifications: Up to two suffix codes may be added to an enclosed disconnect load switch. Example: Catalogue Number 194E-CA20-NP is a disconnect load switch with a power pole in a stainless steel enclosure (see page 10-14). Accessories — Page 10-11 Specifications — Page 10-17 Approximate Dimensions — Page 10-19 10-9 IEC Load Switches Bulletin 194E 25 Amps to 100 Amps Product Selection Enclosed Disconnect Load Switches — 3-Pole Base-Mounted (continued) Metallic Enclosures IP54/Type 1 — 3-Pole Maximum Load Rating (A) Ref. Dim. Page 25 A1 32 A1 40 A1 63 A1 80 B1 100 B1 ABS Thermoplastic Enclosure — IP65, For High-Impact Applications Noryl Thermoplastic Enclosures — IP65, For Corrosion-Prone Applications Description Handle Colour Black Red/Yellow Black Red/Yellow Black Red/Yellow Black Red/Yellow Black Red/Yellow Black Red/Yellow Catalogue Number ➊ 194E-AA20 194E-AA20E 194E-AA32 194E-AA32E 194E-AA40 194E-AA40E 194E-AA63 194E-AA63E 194E-AA80 194E-AA80E 194E-AA00 194E-AA00E No. of Poles Use with Catalogue Number Catalogue Number 3…4 194E-25/32 194L-G3572 3…4 194E-40/63 194L-G3663 3…4 194E-80/100 194E-G3665 6 194E-25/32 194E-G3663 6 194E-40/63 194E-G3665 No. of Poles Switch Usage for Catalogue Number Catalogue Number 3…4 194E-25/32 194L-G3576 3…4 194E-40/63 194L-G3664 3…4 194E-80/100 194E-G3666 6 194E-25/32 194E-G3664 6 194E-40/63 194E-G3666 Use with Enclosures Catalogue Number Catalogue Number 194L-G3663, G3664, G3665, G3666 (5 per package) 194L-G3673 194L-G3572 and G3676 (5 per package) 194L-G3653 Additional Earth/Ground and Neutral Terminals — For Thermoplastic Enclosure ➊ Modifications: Up to two suffix codes may be added to an enclosed disconnect load switch. Example: Catalogue Number 194E-CA20-NP is a disconnect load switch with a power pole in a stainless steel enclosure (see page 10-14). Accessories — Page 10-11 Specifications — Page 10-17 Approximate Dimensions — Page 10-19 10-10 IEC Load Switches Bulletin 194E 25 Amps to 100 Amps Accessories Auxiliary Contacts Type Use with Catalogue Number Catalogue Number ➊ 194E-A25…100 194E-A-P11 194E-E25…100 194E-E-P11 194E-A25…100 194E-A-PL11 194E-E25…100 194E-E-PL11 194E-A25…100 194E-A-P22 194E-E25…100 194E-E-P22 194E-A25...100 194E-A-PD10 194E-E25...100 194E-E-PD10 1 N.O. + 1 N.C. 1 N.O. + 1 N.C.L.B. 2 N.O. + 2 N.C. 1 N.O. E.B. Additional Pole Use with Catalogue Number 194E-A25 194E-A32 194E-A40 194E-A63 194E-A80 194E-A100 194E-E25 194E-E32 194E-E40 194E-E63 194E-E80 194E-E100 Catalogue Number ➊ 194E-A25-NP 194E-A32-NP 194E-A40-NP 194E-A63-NP 194E-A80-NP 194E-A100-NP 194E-E25-NP 194E-E32-NP 194E-E40-NP 194E-E63-NP 194E-E80-NP 194E-E100-NP Earthing/Grounding Terminal Use with Catalogue Number Catalogue Number ➊ 194E-A25/32 194E-A32-PE 194E-A40/63 194E-A63-PE 194E-A80/100 194E-A100-PE 194E-E25/32 194E-E32-PE 194E-E40/63 194E-E63-PE 194E-E80/100 194E-E100-PE Use with Catalogue Number Catalogue Number ➊ 194E-A25/32 194E-A32-TN 194E-A40/63 194E-A63-TN 194E-A80/100 194E-A100-TN 194E-E25/32 194E-E32-TN 194E-E40/63 194E-E63-TN 194E-E80/100 194E-E100-TN Neutral Terminal ➊ A maximum of two side-mount accessories may be added to a 194E switch. Product Selection — Page 10-3 10-11 IEC Load Switches Bulletin 194E 25 Amps to 100 Amps Accessories Base/DIN Rail Mounting (1) 4-Pole Auxiliary Contact or (1) 2-Pole Auxiliary Contact or Grounding Terminal Additional Pole or Neutral Terminal or (1) 2-Pole Auxiliary Contact or (1) 4-Pole Auxiliary Contact Front/Door Mounting (1) 4-Pole Auxiliary Contact or (1) 2-Pole Auxiliary Contact or Grounding Terminal or Additional Pole Neutral Terminal or (1) 2-Pole Auxiliary Contact or (1) 4-Pole Auxiliary Contact Terminal Covers Number of Poles Use with Catalogue Number Catalogue Number 194E-25/32 194E-25-C3 194E-40/63 194E-40-C3 194E-80/100 194E-80-C3 194E-25/32 194E-25-C4 194E-40/63 194E-40-C4 194E-80/100 194E-80-C4 3 4 6-Pole Mechanical Coupling Use with Catalogue Number Catalogue Number 194E-25/32 194E-G3660 194E-40/63 194E-G3661 194E-80/100 194E-G3662 Note: User must order (2) Bulletin 194E 3-Pole Switches separately. Product Selection — Page 10-3 10-12 IEC Load Switches Bulletin 194E 25 Amps to 100 Amps Accessories (continued) Blank Legend Plate with Bezel Package Quantity 10 0-1 Marked Legend Plates with Bezel Package Quantity 10 OFF-ON Marked Legend Plate w/Bezel Package Quantity 10 Catalogue Number 194L-A4-000 194L-A6-000 194L-A8-000 194L-I4-000 194L-I6-000 194L-I8-000 Catalogue Number 194L-A4-175 194L-A6-175 194L-A8-175 194L-I4-175 194L-I6-175 194L-I8-175 Catalogue Number 194L-A4-175I 194L-A6-175I 194L-A8-175I 194L-I4-175I 194L-I6-175I 194L-I8-175I Additional Legend Plates/Frames Colour Legend Size Use with Gray/Black 19.2 mm x 49 mm 3/4 in. x 1-59/64 in. Size 6 Type G and N Style Actuators 194L-HE6G/N 18 mm x 84 mm 11/16 in. x 3-5/16 in. Size 8 Type G and N Style Actuators 194L-HE8G/N Red/Yellow Gray/Black Red/Yellow Legend Marking (Blank) MAIN SWITCH HAUPTSCHALTER INTERR. PRINCIPALE INTERR. PRINCIPAUX INTERR. PRINCIPAL HUVUDBRYTARE WAHLSCHALTER EMERGENCY OFF (Blank) MAIN SWITCH HAUPTSCHALTER INTERR. PRINCIPALE INTERR. PRINCIPAUX INTERR. PRINCIPAL HUVUDBRYTARE WAHLSCHALTER EMERGENCY OFF Catalogue Number 194L-G3515 194L-G3515A 194L-G3515B 194L-G3515C 194L-G3515D 194L-G3515E 194L-G3515F 194L-G3515G 194L-G3515H 194L-G3667 194L-G3667A 194L-G3667B 194L-G3667C 194L-G3667D 194L-G3667E 194L-G3667F 194L-G3667G 194L-G3667H Product Selection — Page 10-3 10-13 IEC Load Switches Bulletin 194E 25 Amps to 100 Amps Accessories (continued) Modifications for Enclosed Switches (see pages 10-9 & 10-10) Description Maximum Load Rating (A) 25 32 40 63 80 100 25/32 40/63 80/100 25/32 40/63 80/100 25/32 40/63 80/100 25/32 40/63 80/100 25/32 40/63 80/100 Power Pole Auxiliary Contact (1 N.O. + 1 N.C.) Auxiliary Contact (1 N.C.E.B.) Auxiliary Contact (1 N.O.E.M. + 1 N.C.L.B.) Earthing Terminal (Ground) Neutral Terminal (Unswitched) Suffix -NP -P11 -PD10 -PL11 -PE -TN Operating Shafts Lengths Construction Use with Catalogue Number Plastic Catalogue Number ➊ 194L-G3380 34 mm (1-11/32 in.) 194E-E… Metal 194E-G3688 Plastic Metal Plastic Metal Plastic 194L-G2830 194E-G3687 194L-G3194 194E-G3707 194L-G3195 Standard Shaft 44 mm (1-47/64 in.) 52 mm (2-3/64 in.) Interlock Shaft 57 mm (2-15/64 in.) 194E-A… Shaft Extension Kits Lengths Use with Catalogue Number Catalogue Number 24 mm (15/16 in.) Per Extension Sold in Qty. of 10 Per Pkg. 194E-A… 194L-G2853 Use with Catalogue Number Catalogue Number Shaft Extension Metal Shaft Extensions — with Padlock Provision in OFF Position Lengths 110 mm…235 mm (4-21/64 in. …9-1/4 in.) 230 mm…350 mm (9-3/64 in.…13-51/64 in.) ➊ Order in quantities of 100 (50 shafts per package). Product Selection — Page 10-3 10-14 194L-G3393 194E-A… 194L-G3394 IEC Load Switches Bulletin 194E 25 Amps to 100 Amps Accessories (continued) Metal Shaft Adaptor Kits — For use with 194R Type 4/4X Handles Description Use with Catalogue Number Catalogue Number Kit includes bezel adapter and 194R-R1 operating shaft. Operating handle (Catalogue Number 194R-HS4) must be ordered separately. 194E-A 194E-G3675 Accessory Description Locking Ring Wrench For Central-Fixing Handles Package Quantity Catalogue Number 1 800E-AW1 Control Knob, Black, with Locking Facility 194L-G2864N 10 Control Knob, Red, with Locking Facility 194L-G2864R Control Knob, Type P Control Knob, Black, 31 mm (1-7/32 in.) Diameter 194L-G2888N 50 Control Knob, Red, 31 mm (1-7/32 in.) Diameter 194L-G2888R Control Knob, Black, L = 37.5 mm (1-31/64 in.) Control Knob, Black, L = 48 mm (1-57/64 in.) Control Knob, Black, L = 37.5 mm (1-31/64 in.) Control Knob, Black, L = 48 mm (1-57/64 in.) 194L-G3154N 194L-G3155N 194L-G3154R 194L-G3155R 50 Rectangular Front Frame with Blank Nameplate L = 48 mm x 62 mm (1-57/64 in. x 2-7/16 in.) 194L-G3196 10 Standard Black Control Knob Rectangular Front Frame Rectangular Front Frame with Blank Nameplate L = 64 mm x 78 mm (2-33/64 in. x 3-5/64 in.) Metal Shaft Extension 194L-G3197 10 194L-G3399 Product Selection — Page 10-3 10-15 IEC Load Switches Bulletin 194E 25 Amps to 100 Amps Accessories (continued) Shaft for Enclosures Suitable For Enclosure Type 194L-G3572 194L-G3576 (95 x 150 x 86 mm) 194L-G3573 194L-G3577 (95 x 150 x 111 mm) 194L (Base-Mounted Switches) 194L-A12(16) 194L-A12(16) 194L-A20(25) 194L-A20(25) 194L-A12(16) 194L-A12(16) 194L-A12(16) 194L-A20(25) 194L-A20(25) 194E-C3663 194E-G3664 (125 x 180 x 105 mm) 194E-G3665 194E-G3666 (175 x 230 x 120 mm) No. of Contacts Suitable For Use with 194E Switch No. of Poles Shaft Required 194E-A25(32) 3 and 4 194L-G3194 — — — 5/6 7/8 9/10 5/6 7/8 Shaft 194L-G3195 Standard 194L-G3194 Standard 194L-G3195 194L-G3194 Standard 194L-G3194 Standard — — — 194E-A40(63) 194E-A25(32) 3 and 4 6 194L-G3194 Standard — — — 194E-A80(100) 194E-A40(63) 3 and 4 6 194E-G3707 Standard 1/2 3/4 1/2 3/4 Possible Accessory Combinations in Enclosure Enclosure Type 194L-G3572 194L-G3576 Switch 194E-A25(32) No. of Poles 3 Shaft Aux. Contacts (single or double) X X X Additional Pole Block X On Switch Neutral Ground Termin- Terminal Block al Block X X 194L-G3194 X X X X X X X (95 x 150 x 86 mm) 194E-G3663 194E-G3664 194E-A40(63) 3 194L-G3194 X X X X X X X X (125 x 180 x 105 mm) 194E-G3665 194E-G3666 194E-A25(32) 194E-A80(100) 6 3 194E-G3707 X X X X X (175 x 230 x 120 mm) 194E-A40(63) Product Selection — Page 10-3 10-16 6 X X X X Standard X X X Standard 1L+1R On Enclosure Neutral Ground Termin- Terminal Block al Block X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X IEC Load Switches Bulletin 194E 25 Amps to 100 Amps Specifications Electrical Ratings Performance Data Rated operational voltage (Ue): IEC ➊ 25 A IEC Applications [V] 690 32 A 40 A 63 A 80 A 100 A 690 690 690 690 690 600 600 600 600 600 Aux. Contacts 690 Rated operational voltage (Ue): UL, CSA [V] Rated insulation voltage (Ui): IEC/UL, CSA [V] Rated impulse voltage (Uimp): UL, CSA [kV] 8 8 8 8 8 8 8 Test voltage, (Ui) 1 minute [kV] w [Hz] 2.5 1.0 50/60 2.5 1.5 50/60 2.5 1.6 50/60 2.5 2.4 50/60 2.5 3.6 50/60 2.5 5.5 50/60 2.5 0.4 50/60 [A] 30 40 50 75 100 120 10 ➋ [A] 25 32 40 63 80 100 6 [A] 25 32 40 63 80 100 10 Lost power per pole Rated frequency Conventional free air thermal current Ith ➊ Conventional enclosed thermal current Ith ➊ 600 690/600 690/600 690/600 690/600 690/600 690/600 600 690/600 Rated current Ie ➊ AC-1/ AC-21A Non inductive or only slightly inductive loads Switching of resistive loads with slight overload Rated power Pe AC-23A AC-3 230V [kW] 7.5 7.5 15 18.5 22 30 — Occasional switching of 3∅ motors and other highly inductive loads (criterion for selecting main switches) 400V [kW] 11 15 18.5 22 37 45 — 690V [kW] 11 15 18.5 22 37 45 — Squirrel-cage motors; starting and stopping of running motors 230V 400V 690V [kW] [kW] [kW] 5.5 7.5 7.5 7.5 11 11 11 15 15 15 18.5 18.5 18.5 30 22 22 37 22 — — — 400/415V [kA] [A] [A] [A] [A] [A] 20 25 900 204 232 136 15 25 900 204 232 136 20 50 1300 484 336 196 15 63 1300 484 336 196 30 80 2500 780 680 376 25 100 2500 780 680 376 — — — — — — Short circuit current (coordination type 2) Rated conditional short-circuit current Maximum fuse rating of circuit (type g, G) Rated short-time current 1cw, 1s Rated breaking capacity AC23A (cosϕ 0.45) 230V 400V 690V DC switching capacity Rated current Ie 48V [A] 25 32 40 63 80 100 110V 220V 440V 96V 2-poles 110V in 220V series 440V 600V 110V 3-poles 220V in series 440V 600V [A] [A] [A] [A] [A] [A] [A] [A] [A] [A] [A] [A] 6 1 0.5 25 23 5 1 0.6 25 13 22 1.5 6 1 0.5 32 25 6 1 0.6 32 15 2.2 0.6 8 1.5 0.6 40 32 8 1.5 0.8 40 20 3.6 2 10 15 0.6 63 50 10 1.5 0.8 63 28 3.6 2 16 3 0.7 80 70 16 3 1 80 50 6.5 3 0 3 0.7 100 80 20 3 1 100 63 6.5 3 90V 3-poles 110V in series 220V 440V 600V [kW] [kW] [kW] [kW] [kW] 1.3 1.1 0.9 0.6 0.4 1.5 1.3 1.1 0.6 0.4 2.9 2.2 1.7 0.9 0.5 4.1 3.3 2 0.9 0.5 5.1 5.5 3.5 1.1 0.9 7.2 7 4.4 1.1 0.9 1-pole DC-21A For resistive loads, T ≤ 1 ms Ue max = 660V — — — Rated power Pe DC-23A, DC-3, DC-5 For inductive loads, T ≤ 15 ms ➊ See conformity to standards listed on page. — ➋ Suitable also for SEV 500. 10-17 IEC Load Switches Bulletin 194E 25 Amps to 100 Amps Specifications Electrical Ratings (continued) Performance Data Continuous current Heavy Pilot Duty Standard Duty Motor rating 60 Hz 120V, 1P 240V, 1P single-phase (2-poles) 480V, 1P 600V, 1P 120V, 3P 240V, 3P three-phase 480V, 3P 600V, 3P 25 A 32 A UL/CSA Applications [A] 25 32 [AC] A600 A600 [DC] — — FLA 9.8 16 HP 0.5 1 FLA 10 12 HP 1.5 2 FLA 8.5 14 HP 3 5 FLA 6.8 11.2 HP 3 5 FLA 13.6 19.2 HP 2 3 FLA 15.2 22 HP 5 7.5 FLA 14 21 HP 10 15 FLA 11 17 HP 10 15 40 A 63 A 80 A 100 A 40 — — 24 2 17 3 21 7.5 16 7.5 28 5 28 10 27 20 22 20 63 — — 34 3 28 5 26 10 20 10 40 7.5 42 15 34 25 27 25 80 — — 56 5 50 10 34 15 27 15 56 10 68 25 52 40 52 50 100 — — 80 7.5 68 15 55 25 44 25 84 15 80 30 65 50 52 50 Aux. Contacts — A600 Q600 — — Mechanical Data Performance Data Protection class according to IEC 529 Motor rating 60 Hz actuators switch bodies Mechanical life [million operations] Max wire gauges Terminal size per IEC 947-1 fine strands 1 conductor mm2 rigid wire 1 conductor mm2 Wire gauges according to UL/CSA [AWG] 25 A 32 A 40 A 63 A 80 A 100 A Aux. Contacts IP65 IP20 0.2 IP65 IP20 0.2 IP65 IP20 0.2 IP65 IP20 0.2 IP65 IP20 0.2 IP65 IP20 0.2 IP65 IP20 0.2 A5 1…10 A5 1…10 A7 2.5…16 A7 2.5…16 A9 4…35 A9 4…35 2xA2 0.5…2.5 1.5…16 14/8 1.5…16 14/8 2.5…25 12/4 2.5…25 12/4 4…50 10/1 4…50 10/1 0.75…2.5 18/14 Environmental Data Storage Operation Product Selection — Page 10-3 10-18 –40…+80°C (–40…+176°F) –25…+60°C (–13…+140°F) IEC Load Switches Bulletin 194E 25 Amps to 100 Amps Approximate Dimensions—mm (inches) Dimensions are not intended to be used for manufacturing purposes. Front Installation Catalogue Number 194E-E… B1 B2 1(3/64) ... 5(13/64) B1 B2 3.3 (1/8) 9.5 (3/8) Dia. 3.3 (1/8) H Q 9.5 (3/8) G P L 6-Pole F 3-Pole Actuators Catalogue Number 194L-HE4A 194L-HE4I 194L-HE4S 194L-HE6A 194L-HE6I 194L-HE6S 194L-HE6N 194L-HE6G P 28 (1-7/64) 28 (1-7/64) 28 (1-7/64) 28 (1-7/64) 28 (1-7/64) 28 (1-7/64) 34 (1-11/32) 34 (1-11/32) Switch Body Q 48 x 48 (1-57/64 x 1-57/64) 48 x 48 (1-57/64 x 1-57/64) 48 x 62 (1-57/64 x 2-7/16) 64 x 64 (2-33/64 x 3-5/64) 64 x 64 (2-33/64 x 3-5/64) 64 x 78 (2-33/64 x 3-5/64) 67 x 67 (2-41/64 x 2-41/64) 67 x 67 (2-41/64 x 2-41/64) Use with Catalogue Number B1➊ 194E-E25/32 — 194E-E40/63 194E-E80/100 48 (1-57/64) 48 (1-57/64) B2 36 (1-27/64) 36 (1-27/64) 36 (1-27/64) F 45 (1-25/32) 54 (2-1/8) 72 (2-27/32) H 64 (2-33/64) 72 (2-27/32) 90 (3-35/64) L 60 (2-3/8) 74 (2-29/32) 90 (3-35/64) G 90 (3-1/2) 108 (4-1/4) 144 (5-11/16) ➊ Does not apply to 194E-40/63A, 6-pole switches. Catalogue Number 194E-E Switch Body with Catalogue Number 194L-HCA Actuator for Central Mounting 3.2 +0.2 0 (1/8) 48 X 48 (1-57/64 X 1-57/64) 24.1 +0.4 0 (61/64) 22.3 +0.4 0 (7/8) 1(3/64)... 6(15/64) 29 (1-5/32) 24.5 (31/32) L Type 194E-E25/32 194E-E40/63 194E-E80/100 L 84.5 (3-21/64) 98.5 (3-7/8) 114.5 (4-33/64) Product Selection — Page 10-3 10-19 IEC Load Switches Bulletin 194E 25 Amps to 100 Amps Approximate Dimensions—mm (inches) Dimensions are not intended to be used for manufacturing purposes. Base Mounting Catalogue Number 194E-A… Y 17 (43/64) F1 D3 B ø3.3 (1/8) Q B H E P F 5 (13/64) L D3 J F1 3-Pole 194L-HE4A 194L-HE4I 194L-HE4S 194L-HE6A 194L-HE6I 194L-HE6S 194L-HE6N 194L-HE6G 28 (1-7/64) 28 (1-7/64) 34 (1-11/32) 34 (1-11/32) 64 x 64 (2-33/64 x 3-5/64) 64 x 78 (2-33/64 x 3-5/64) 67 x 67 (2-41/64 x 2-41/64) 67 x 67 (2-41/64 x 2-41/64) Product Selection — Page 10-3 10-20 6-Pole * F=F1-F2 Actuators P Q 28 48 x 48 (1-7/64) (1-57/64 x 1-57/64) 28 48 x 48 (1-7/64) (1-57/64 x 1-57/64) 28 48 x 62 (1-7/64) (1-57/64 x 2-7/16) 28 64 x 64 (1-7/64) (2-33/64 x 3-5/64) F2 G * X Catalogue Number F2 Cover Requirements Use with Catalogue Number 194E-A25/32 194E-A40/63 194E-A80/100 Y min. X≥ Y max. X≥ 5 142 9.5 90 (13/64) (5-19/32) (3/8) (3-35/64) 2.5 150 9.5 90 (7/64) (5-29/32) (3/8) (3-35/64) 2.5 150 9.5 90 (7/64) (5-29/32) (3/8) (3-35/64) Switch Body Use with Cat. Number 194E-A25/32 194E-A40/63 194E-A80/100 D3 E F1 F2 G H L J 4.5 70 30 15 90 64 84 45 (3/16) (2-49/64) (1-3/16) (19/32) (3-1/2) (2-33/64) (3-5/16) (1-25/32) 4.5 80 37 17 108 72 98 54 (3/16) (3-5/32) (1-15/32) (43/64) (4-1/4) (2-27/32) (3-55/64) (2-1/8) 5.6 95 48.5 23.5 144 90 114 72 (7/32) (3-3/4) (1-29/32) (59/64) (5-11/16) (3-35/64) (4-1/2) (2-27/32) IEC Load Switches Bulletin 194E 25 Amps to 100 Amps Approximate Dimensions—mm (inches) Dimensions are not intended to be used for manufacturing purposes. Base Mounting Catalogue Number 194E-A… Catalogue Number 194E-A… Switch Body with Catalogue Number 194L-G2853 Shaft Extension Shaft extensions Y 17 (43/64) B ø3.3 (1/8) Q B 24 (61/64) Switch body 24 (61/64) 4 (11/64) 2.5 (7/64) L Switch Body Catalogue Number 194E-A 194E-A 194E-A L 25/32 40/63 80/100 88 102 118 with 1 shaft extension (3-15/32) (4-1/32) (4-21/32) 112 126 142 with 2 shaft ext. (4-27/64) (4-31/32) (15-19/32) 136 150 166 with 3 shaft ext. (5-23/64) (5-29/32) (6-35/64) 160 174 190 with 4 shaft ext. (6-5/16) (6-55/64) (7-31/64) 184 198 214 with 5 shaft ext. (7-1/4) (7-51/64) (8-7/16) 208 222 238 with 6 shaft ext. (8-13/64) (8-3/4) (9-3/8) Actuators Shaft Type 194L-G2830 Y 2.5…9.5 (7/64…3/8) 9…18 194L-G3194 (23/64…23/32) 14…23 194L-G3195 (9/16)…(29/32) 194L-HE4A 194L-HE4I 194L-HE6A 194L-HE6I 194L-HE6N 194L-HE6G B 36 (1-27/64) 36 (1-27/64) 48 (1-57/64) 48 (1-57/64) 48 (1-57/64) 48 (1-57/64) Q 48 x 48 (1-57/64 x 1-57/64) 48 x 48 (1-57/64 x 1-57/64) 64 x 64 (2-33/64 x 2-33/64) 64 x 64 (2-33/64 x 2-33/64) 67 x 67 (2-41/64 x 2-41/64) 67 x 67 (2-41/64 x 2-41/64) Front Installation Catalogue Number 194E-A… Catalogue Number 194E-A Switch Body with Metal Shaft Extension 2.5(7/64)... 9.5 (3/8) A Catalogue Number 194L-G3393 194L-G3394 A 110…235 (4-11/32…9-1/4) 230…350 (9-1/16…13-25/32) L Catalogue Number 194E-A25/32 194E-A40/63 194E-A80/100 L➊ 60 (2-3/8) 74 (2-59/64) 90 (3-35/64) ➊ +2.5 (7/64) [DIN 46 277] 35 (1-3/8) Rails. Product Selection — Page 10-3 10-21 IEC Load Switches Bulletin 194E 25 Amps to 100 Amps Approximate Dimensions—mm (inches) Dimensions are not intended to be used for manufacturing purposes. Base and Front Installation Catalogue Number 194E… with Auxiliary Contact Block Installed Contacts M 1 N.O. + 1 N.C. 9 (23/64) 2 N.O. + 2 N.C. 18 (23/32) M M Catalogue Number 194E… with 4-Pole, Ground and Neutral Terminals Catalogue Number M 14 194E-25/32 (9/16) 17.5 194E-40/63 (11/16) 22 194E-80/100 (7/8) M Product Selection — Page 10-3 10-22 M IEC Load Switches Bulletin 194E 25 Amps to 100 Amps Approximate Dimensions—mm (inches) Dimensions are shown in millimetres (inches). Dimensions are not intended to be used for manufacturing purposes. Base Mounting Catalogue Number 194E-A… Thermoplastic Enclosures E Ø D1 Ø D1 A F F Ø D2 Complete Switches Catalogue Number Poles Enclosures ABS Noryl Catalogue Number 3 and 4 194L-G3572 194L-G3576 6 194E-G3663 194E-G3664 3 and 4 194E-G3663 194E-G3664 6 194E-G3665 194E-G3666 3 and 4 194E-G3665 194E-G3666 194E-Y25/32 194E-Y40/63 194E-Y80/100 Catalogue Number 194E-A 20/32… No. of Extensions with 1 extension with 2 extensions with 3 extensions with 4 ➊ extensions with 5 ➊ extensions with 6 ➊ extensions H E B B 96 (3-25/32) 120 (4-23/32) 144 (5-43/64) 168 (6-39/64) 192 (7-9/16) 216 (8-1/2) A 150 (5-29/32) 180 (7-3/32) 180 (7-3/32) 230 (9-1/16) 230 (9-1/16) B ØD1 95 22.5 (3-3/4) (57/64) 125 37.5 (4-59/64) (1-31/64) 125 37.5 (4-59/64) (1-31/64) 175 47.5 (6-57/64) (1-7/8) 175 47.5 (6-57/64) (1-7/8) Catalogue Number 194E-A 40/63… Inside Enclosure Depth 107 (4-7/32) 131 (5-5/32) 155 (6-7/64) 179 (7-3/64) 203 (8) 227 (8-15/16) ØD2 22.5 (57/64) E 60 (2-3/8) — — — — — — 155 (6-3/32) 155 (6-3/32) F H 115 86 (4-17/32) (3-3/8) 145 105 (5-23/32) (4-1/8) 145 105 (5-23/32) (4-1/8) 195 120 (4-11/16) (4-47/64) 195 120 (4-11/16) (4-47/64) Catalogue Number 194E-A 80/00… 114 (4-31/64) 138 (5-7/16) 162 (6-3/8) 186 (7-21/64) 210 (8-17/64) 234 (9-7/32) ➊ +2 When more than 4 modules are used, attach the first one to the switch body using the screws supplied with the extension (Catalogue Number: 194L-G2853). Product Selection — Page 10-3 10-23 IEC Load Switches Bulletin 194E 25 Amps to 100 Amps Approximate Dimensions—mm (inches) Dimensions are not intended to be used for manufacturing purposes. Enclosed Switches 3/8 (9.7) 3/8 (9.7) 7-7/8 (200.2) 7-23/64 (186.9) 7-1/2 (190.5) 6-3/4 (171.5) (4)- 5/16 (7.9)DIA. MTG. HOLES 1-15/64 (31.2) 9-1/2 8-3/4 (241.3) (222.3) (4)- 5/16 (7.9)DIA. MTG. HOLES 2 (50.8) 1-15/64 (31.2) 4-15/16 (125.5) Dim Ref. A1 194E-CA20…63, 194E-FA20…63, 194E-AA20…63 Dim Ref. B1 194E-CA80…00, 194E-FA80…00, 194E-AA80…00 1/2 (11.9) 4-29/32 (125.0) 6-7/8 6-3/16 (175.0) (157.0) (4)-3/16 (4.6) DIA. MTG. HOLES 11/32 (8.9) 7-3/8 (188.0) 7-1/2 (190.5) 10-15/16 10 (277.9) (254.0) 4-3/16 (106.9) Dim Ref. C1 194E-KA20…63 Product Selection — Page 10-3 10-24 4.00 (101.6 6-15/16 (176.3) (4)-5/16 (7.1)DIA. MTG. HOLES 1/2 (11.9) 6-1/2 (164.1) Dim Ref. B1 194E-KA80…00 8-11/16 (220.5)