GM393 LOW POWER DUAL DIFFERENTIAL COMPARATOR Description Features The GM393 consists of two independent precision voltage comparators with an offset voltage specification as low as 2.0 mV max for two comparators which were designed specifically to operate from a single power supply over a wide range of voltages. Operation from split power supplies is also possible and the low power supply current drain is independent of the magnitude of the power supply voltage. These comparators also have a unique characteristic. In that, the input commonmode voltage range includes ground, even though operated from a single power supply voltage. Single- supply Range: ±1.0V to ±18V Wide supply voltage range: ±2.0V to ±36V Very low supply current drain (0.4 mA) - independent of supply voltage Low input biasing current: 25 nA Low input offset current: ±5 nA Maximum offset voltage: ±3 mV Input common-mode voltage range includes ground Application areas include limit comparators, simple analog to digital converters; pulse, square wave and time delay generators; wide range VCO; MOS clock timers; multivibrators and high voltage digital logic gates. The GM393 are designed to directly interface with TTL and CMOS. When operated from both plus and minus power supplies, the GM393 will directly interface with MOS logic, where their low power drain is a distinct advantage over standard comparators. Differential input voltage range equal to the power supply voltage Low output saturation voltage: 250 mV at 4 mA Output voltage compatible with TTL, DTL, ECL, MOS and CMOS logic systems The GM393 is available in DIP-8 and SOP-8 packages. Application High precision comparators Wide Range VCO Simple Analog to Digital Converters MOS Clock Timer GM393V1.00 Pulse, Square Wave Generators 1 GM393 LOW POWER DUAL DIFFERENTIAL COMPARATOR Connecting Diagram (Top View) Output A 1 8 Inverting Input A- 2 7 NON - Inverting Input A+ GND - 3 A + + B - 4 VCC Output B 6 Inverting Input B- 5 NON - Inverting Input B+ SOP-8, DIP-8 PACKAGE Marking Information and Pin Configurations (Top View) SO8 7. DIP8 6. Input B Output B - 7. 5. Input B + 8. VCC 6. Input B 5. Input B + Output B 8. VCC GM393 AYWW GM393 AYWW 1. Output A 2. 1. Output A 4. Gnd Input A - 3. Input A + 2. 4. Gnd 3. Input A + Input A - GM393V1.00 A: Assembly / Test site code Y: Year WW: Week 2 Ordering Information Ordering Number Package Shipping GM393D8T DIP-8 60 Units / Tube GM393S8T SOP-8 100 Units / Tube GM393S8R SOP-8 2,500 Units / Tape & Reel www.gammamicro.com.tw GM393 LOW POWER DUAL DIFFERENTIAL COMPARATOR Absolute Maximum Ratings PARAMETER RATINGS UNITS ±18 or 36 V Input Current 50 mA Input Voltage -0.3 to +32 V Supply Voltage Power dissipation DIP 8 780 SO 8 510 mW Operating Temperature Range -40 to 125 ℃ Storage Temperature - 65 to 150 ℃ 260 ℃ Lead Temperature (soldering 10 sec.) Block Diagram VCC VIN + VOUT GM393V1.00 VIN - 3 GM393 LOW POWER DUAL DIFFERENTIAL COMPARATOR Electrical Characteristics (VCC = 5V, at specified free-air temperature, unless otherwise specified) Parameter Symbol Condition Input offset Voltage VIO VCC = 5V to Max VIC = VICR min VO = 1.4V Input Offest Current IIO VO = 1.4V Input Bias Current IIB VO =1.4V Min TA = 25℃ Typ Max ±2 ±5 Full Range TA = 25℃ ±5 Full Range ±50 nA ±150 TA = 25℃ -20 Full Range -250 nA 400 TA = 25℃ 0 to VCC-1.5V Full Range 0 to VCC-2.0V VICR High-Level output Voltage VOL IOL = 4mA, VID = 1V Large-Signal Differential Voltage Amplification AVD VCC = 15V, VO = 1V to 11V RL = 15K to VCC TA = 25℃ High Level Output Current IOH VOH = 5V, VID = 1V TA = 25℃ 0.1 VOH = 30V, VID = 1V Full Range 1 Low Level Output Current IOL VOH = 1.5V, VID = -1V TA = 25℃ Supply Current ICC RL = ∞, VCC = 5V TA = 25℃ RL = ∞, VCC = 30V Full Range Response Time (Note 1) mV 9 Common-Mode Input Voltage Range** RL Connected to 5V through 5.1k. CL = 15pF Unit TA = 25℃ V 150 Full Range 400 mV 700 50 200 V/mV 50 nA µA 6 mA 0.8 1.0 2.5 100mV input step with 5mV overdrive 1.3 TTL - level input step 0.3 mA µs All characteristics are measured under open loop conditions with zero common-mode input voltage unless otherwise specified. "MAX" VCC for testing purposes is 30V. Full range is 0°C to 70°C. ** The voltage at either input or common - mode should not be allowed to go negative by more than 0.3V. The upper end of the common - mode voltage range is VCC - 1.5V, but either or both inputs can go to 30V without damage. GM393V1.00 Note 1: CL includes probe and jig capacitance. The response time specified is the interval between the input step function and the instant when the output crosses 1.4V. 4 GM393 LOW POWER DUAL DIFFERENTIAL COMPARATOR Typical Performance Characteristics 80 10 Out of Saturation 60 TA = -55°C 50 TA = 0°C 40 TA = 25°C 30 20 TA = 70°C TA = 125°C 10 0 0 5 10 15 20 25 30 35 40 VCC, Supply Voltage (VDC) Figure 1. Input Bias Current versus Power Supply Voltage 1.0 1.0 TA = 125°C 0.1 TA = 25°C TA = -55°C 0.01 0.001 0.01 0.1 1.0 10 100 ISINK, Output Sink Current (mA) Figure 2. Output Saturation Voltage v.s. Output Sink Current TA = -55°C TA = 0°C 0.8 TA = 25°C 0.6 TA = 70°C 0.4 TA = 125°C 0.2 0.0 0 RL = ∞ 5 10 15 20 25 30 35 40 VCC, Supply Voltage (VDC) Figure 3. Power Supply Current versus Power Supply Voltage GM393V1.00 ICC, Supply Current (mA) VOL, Saturation Voltage (VDC) IIB, Input Bias Current (nA) 70 5 GM393 LOW POWER DUAL DIFFERENTIAL COMPARATOR Package Outline Dimensions – SO 8 0.189 - 0.197 (4.800 - 5.004) 0.228 - 0.244 (5.791 - 6.198) 0.016 - 0.050 (0.406 - 0.270) D 0.014 - 0.020 (0.356 - 0.508) 0.050 (1.270) TYP 0.150 - 0.157 (3.810 - 3.988) 0.053 - 0.059 (1.346 - 1.753) SEATING PLAN 0.004 - 0.010 (0.012 - 0.254) 8.0 MAX 0.008 - 0.010 (0.203 - 0.254) Package Outline Dimensions – DIP 8 0.250 +/- 0.005 (6.350 +/- 0.127) 0.370 - 0.400 (9.474 - 10.150) 0.300 - 0.320 (7.620 - 8.128) 0.06 (1.524) GM393V1.00 0.145 - 0.200 (3.683 - 5.080) 6 0.125 - 0.140 (3.175 - 3.556) 0.045 +/- 0.015 (1.143 +/- 0.183) 0.108 +/- 0.003 (0.457 +/- 0.076) 0.100 +/- 0.010 (2.540 +/- 0.254) J 0.009 - 0.010 (0.299 - 0.381) 95 +/- 5 GM393 LOW POWER DUAL DIFFERENTIAL COMPARATOR GM Circuit Type 393 Circuit Type S8 R Package Type Shipping Type S8: SO 8 D8: DIP 8 R: Taping & Reel T: Tube GM393V1.00 Ordering Number 1 7