GM71C17800C GM71CS17800CL 2,097,152 WORDS x 8 BIT CMOS DYNAMIC RAM Description Features The GM71C(S)17800C/CL is the new generation dynamic RAM organized 2,097,152 x 8 bit. GM71C(S)17800C/CL has realized higher density, higher performance and various functions by utilizing advanced CMOS process technology. The GM71C(S)17800C/CL offers Fast Page Mode as a high speed access mode. Multiplexed address inputs permit the GM71C(S)17800C/CL to be packaged in standard 400 mil 28pin plastic SOJ, and standard 400mil 28 pin plastic TSOP II. The package size provides high system bit densities and is compatible with widely available automated testing and insertion equipment. * 2,097,152 Words x 8 Bit Organization * Fast Page Mode Capability * Single Power Supply (5V+/-10%) * Fast Access Time & Cycle Time tRAC tCAC tPC 50 13 90 35 GM71C(S)17800C/CL-6 GM71C(S)17800C/CL-7 60 70 15 18 110 130 40 45 * Low Power Active : 715/660/605mW (MAX) Standby : 11mW (CMOS level : MAX) 0.83mW (L-version : MAX) * RAS Only Refresh, CAS before RAS Refresh, Hidden Refresh Capability * All inputs and outputs TTL Compatible * 2048 Refresh Cycles/32ms * 2048 Refresh Cycles/128ms (L- version) * Battery Back Up Operation (L- version) * Self Refresh Operation (L-version) 28 SOJ 28 TSOP II VSS 1 28 VSS VSS 1 28 VSS I/O0 2 27 I/O7 I/O0 2 27 I/O7 I/O1 3 26 I/O6 I/O1 3 26 I/O6 I/O2 4 25 I/O5 I/O2 4 25 I/O5 I/O3 5 24 I/O4 I/O3 5 24 I/O4 WE 6 23 CAS WE 6 23 CAS RAS 7 NC 8 22 OE 21 A9 NC 8 21 A9 A10 9 20 A8 A10 9 20 A8 RAS 7 22 OE A0 10 19 A7 A0 10 19 A7 A1 11 18 A6 A1 11 18 A6 A2 12 17 A5 A2 12 17 A5 A3 13 16 A4 A3 13 16 A4 15 VSS VCC 14 (Top View) Rev 0.1 / Apr’01 tRC GM71C(S)17800C/CL-5 Pin Configuration VCC 14 (Unit: ns) 15 VSS GM71C17800C GM71CS17800CL Pin Description Pin Function Pin Function A0-A10 Address Inputs WE Read/Write Enable A0-A10 Refresh Address Inputs OE Output Enable Data-In/Out VCC Power (+5V) RAS Row Address Strobe VSS Ground CAS Column Address Strobe NC No Connection I/O0-I/O7 Ordering Information Type No. Access Time Package GM71C(S)17800CJ/CLJ -5 GM71C(S)17800CJ/CLJ -6 GM71C(S)17800CJ/CLJ -7 50ns 60ns 70ns 400 Mil 28 Pin Plastic SOJ GM71C(S)17800CT/CLT -5 GM71C(S)17800CT/CLT -6 GM71C(S)17800CT/CLT -7 50ns 60ns 70ns 400 Mil 28 Pin Plastic TSOP II Absolute Maximum Ratings* Symbol Parameter Rating Unit 0 ~ +70 C -55 ~ +125 C TA Ambient Temperature under Bias TSTG Storage Temperature (Plastic) VIN/OUT Voltage on any Pin Relative to VSS -1.0 ~ +7.0V V VCC Voltage on VCC Relative to VSS -1.0 ~ +7.0V V IOUT Short Circuit Output Current 50 mA PT Power Dissipation 1.0 W Note: Operation at or above Absolute Maximum Ratings can adversely affect device reliability. Recommended DC Operating Conditions (TA = 0 ~ +70C) Symbol Parameter Min Typ Max Unit VCC Supply Voltage 4.5 5.0 5.5 V VIH Input High Voltage 2.4 - 6.0 V VIL Input Low Voltage -1.0 - 0.8 V Note: All voltage referred to Vss. Rev 0.1 / Apr’01 GM71C17800C GM71CS17800CL DC Electrical Characteristics (VCC = 5V+/-10%, Vss = 0V, TA = 0 ~ 70C) Symbol Parameter Min Max Unit VOH Output Level Output "H" Level Voltage (IOUT = -5mA) 2.4 VCC V VOL Output Level Output "L" Level Voltage (IOUT = 4.2mA) 0 0.4 V ICC1 Operating Current Average Power Supply Operating Current (RAS, CAS Cycling: tRC = tRC min) 50ns - 110 60ns - 100 70ns - 90 - 2 ICC2 ICC3 ICC4 ICC5 ICC6 Standby Current (TTL) Power Supply Standby Current (RAS, CAS = VIH, DOUT = High-Z) mA 50ns - 110 60ns - 100 70ns - 90 Fast Page Mode Current Average Power Supply Current Fast Page Mode (tPC = tPC min) 50ns - 100 60ns - 90 70ns - 85 - 1 mA - 150 uA 50ns - 110 60ns - 100 70ns CAS-before-RAS Refresh Current (tRC = tRC min) 1, 2 mA RAS Only Refresh Current Average Power Supply Current RAS Only Refresh Mode (tRC = tRC min) Standby Current (CMOS) Power Supply Standby Current (RAS, CAS >= VCC - 0.2V, Dout = High-Z) Note mA 2 mA 1, 3 5 mA - 90 ICC7 Battery Back Up Operating Current (Standby with CBR Refresh) (tRC=62.5us, tRAS<=0.3us, DOUT=High-Z) - 500 uA 4,5 ICC8 Standby Current RAS = VIH CAS = VIL DOUT = Enable - 5 mA 1 ICC9 Self-Refresh Mode Current (RAS, CAS<=0.2V, DOUT=High-Z) - 300 uA 5 IL(I) Input Leakage Current Any Input (0V<=VIN<= 6V) -10 10 uA IL(O) Output Leakage Current (DOUT is Disabled, 0V<=VOUT<= 6V) -10 10 uA Note: 1. ICC depends on output load condition when the device is selected. ICC(max) is specified at the output open condition. 2. Address can be changed once or less while RAS = VIL. 3. Address can be changed once or less while CAS = VIH. 4. CAS = L (<=0.2) while RAS = L (<=0.2). 5. L-version. Rev 0.1 / Apr’01 GM71C17800C GM71CS17800CL Capacitance (VCC = 5V+/-10%, TA = 25C) Symbol Parameter Min Max Unit Note CI1 Input Capacitance (Address) - 5 pF 1 CI2 Input Capacitance (Clocks) - 7 pF 1 CI/O Output Capacitance (Data-In/Out) - 7 pF 1, 2 Note: 1. Capacitance measured with Boonton Meter or effective capacitance measuring method. 2. CAS = VIH to disable DOUT. AC Characteristics (VCC = 5V+/-10%, TA = 0 ~ +70C, Vss = 0V, Note 1, 2, 18) Test Conditions Input rise and fall times : 5 ns Input timing reference levels : 0.8V, 2.4V Output timing reference levels : 0.4V, 2.4V Output load : 2TTL gate + CL (100 pF) (Including scope and jig) Read, Write, Read-Modify-Write and Refresh Cycles (Common Parameters) Symbol Parameter GM71C(S)17800 GM71C(S)17800 GM71C(S)17800 C/CL-6 C/CL-7 C/CL-5 Unit Note Min Max Min Max Min Max tRC Random Read or Write Cycle Time 90 - 110 - 130 - ns tRP RAS Precharge Time 30 - 40 - 50 - ns tCP CAS Precharge Time 7 - 10 - 10 - ns tRAS RAS Pulse Width 50 10,000 60 10,000 70 10,000 ns tCAS CAS Pulse Width 13 10,000 15 10,000 18 10,000 ns tASR Row Address Set up Time 0 - 0 - 0 - ns tRAH Row Address Hold Time 7 - 10 - 10 - ns tASC Column Address Set-up Time 0 - 0 - 0 - ns tCAH tRCD tRAD tRSH tCSH Column Address Hold Time 7 - 10 - 15 - ns RAS to CAS Delay Time 17 45 20 45 20 52 ns 3 RAS to Column Address Delay Time 12 30 15 30 15 35 ns 4 RAS Hold Time 13 - 15 - 18 - ns CAS Hold Time 50 - 60 - 70 - ns tCRP tODD CAS to RAS Precharge Time 5 - 5 - 5 - ns 13 - 15 - 18 - ns 5 tDZO tDZC tT OE Delay Time from DIN 0 - 0 - 0 - ns 6 CAS Delay Time from DIN 0 - 0 - 0 - ns 6 Transition Time (Rise and Fall) 3 50 3 50 3 50 ns 7 OE to DIN Delay Time Rev 0.1 / Apr’01 GM71C17800C GM71CS17800CL Read Cycle GM71C(S)17800 GM71C(S)17800 GM71C(S)17800 C/CL-5 C/CL-6 C/CL-7 Symbol Parameter Min Max Min Max Min Max Unit Note tRAC Access Time from RAS - 50 - 60 - 70 ns 8,9 tCAC Access Time from CAS - 13 - 15 - 18 ns 9,10,17 tAA Access Time from Address - 25 - 30 - 35 ns 9,11,17 tOAC Access Time from OE - 13 - 15 - 18 ns 9 tRCS Read Command Setup Time 0 - 0 - 0 - ns tRCH Read Command Hold Time to CAS 0 - 0 - 0 - ns 12 tRRH tRAL Read Command Hold Time to RAS 5 - 5 - 5 - ns 12 Column Address to RAS Lead Time 25 - 30 - 35 - ns tCAL Column Address to CAS Lead Time 25 - 30 - 35 - ns tCLZ CAS to Output in Low-Z 0 - 0 - 0 - ns tOH Output Data Hold Time 3 - 3 - 3 - ns tOHO Output Data Hold Time from OE 3 - 3 - 3 - ns tOFF Output Buffer Turn-off Time - 13 - 15 - 15 ns 13 tOEZ Output Buffer Turn-off Time to OE - 13 - 15 - 15 ns 13 tCDD CAS to DIN Delay Time 13 - 15 - 18 - ns 5 Unit Note 14 Write Cycle GM71C(S)17800 GM71C(S)17800 GM71C(S)17800 C/CL-5 C/CL-6 C/CL-7 Symbol Parameter Min Max Min Max Min Max tWCS Write Command Setup Time 0 - 0 - 0 - ns tWCH Write Command Hold Time 7 - 10 - 15 - ns tWP Write Command Pulse Width 7 - 10 - 10 - ns tRWL Write Command to RAS Lead Time 13 - 15 - 18 - ns tCWL Write Command to CAS Lead Time 13 - 15 - 18 - ns tDS Data-in Setup Time 0 - 0 - 0 - ns 15 tDH Data-in Hold Time 7 - 10 - 15 - ns 15 Rev 0.1 / Apr’01 GM71C17800C GM71CS17800CL Read- Modify-Write Cycle Symbol Parameter GM71C(S)17800 GM71C(S)17800 GM71C(S)17800 C/CL-5 C/CL-6 C/CL-7 Unit Note Min Max Min Max Min Max tRWC Read-Modify-Write Cycle Time tRWD 131 - 155 - 181 - ns RAS to WE Delay Time 73 - 85 - 98 - ns 14 tCWD CAS to WE Delay Time 36 - 40 - 46 - ns 14 tAWD Column Address to WE Delay Time 48 - 55 - 63 - ns 14 tOEH OE Hold Time from WE 13 - 15 - 18 - ns Refresh Cycle Symbol Parameter GM71C(S)17800 GM71C(S)17800 GM71C(S)17800 C/CL-5 C/CL-6 C/CL-7 Unit Note Min Max Min Max Min Max tCSR CAS Setup Time (CAS-before-RAS Refresh Cycle) 5 - 5 - 5 - ns tCHR CAS Hold Time (CAS-before-RAS Refresh Cycle) 10 - 10 - 10 - ns tWRP WE Setup Time (CAS-before-RAS Refresh Cycle) 0 - 0 - 0 - ns tWRH WE Hold Time (CAS-before-RAS Refresh Cycle) 7 - 10 - 10 - ns tRPC RAS Precharge to CAS Hold Time 5 - 5 - 5 - ns Fast Page Mode Cycle Symbol Parameter GM71C(S)17800 GM71C(S)17800 GM71C(S)17800 C/CL-6 C/CL-7 C/CL-5 Unit Note Min Max Min Max Min Max tPC Fast Page Mode Cycle Time tRASP 35 - 40 - 45 - ns Fast Page Mode RAS Pulse Width - 100,000 - 100,000 - 100,000 ns 16 tACP Access Time from CAS Precharge - 30 - 35 - 40 ns 9,17 tRHCP RAS Hold Time from CAS Precharge 30 - 35 - 40 - ns Rev 0.1 / Apr’01 GM71C17800C GM71CS17800CL Fast Page Mode Read-Modify-Write Cycle Symbol Parameter GM71C(S)17800 GM71C(S)17800 GM71C(S)17800 C/CL-5 C/CL-6 C/CL-7 Unit Note Min Max Min Max Min Max tPRWC Fast Page Mode Read-Modify-Write Cycle Time 76 - 85 - 96 - ns tCPW WE Delay Time from CAS Precharge 53 - 60 - 68 - ns 14 Unit Note Self Refresh Mode ( L-version ) Symbol Parameter GM71CS17800 CL-5 GM71CS17800 CL-6 GM71CS17800 CL-7 Min Max Min Max Min Max tRASS RAS Pulse Width ( Self-refresh ) tRPS tCHS RAS Precharge Time ( Self-refresh ) CAS Hold Time ( Self-refresh ) Rev 0.1 / Apr’01 100 - 100 - 100 - µs 90 - 110 - 130 - ns -50 - -50 - -50 - ns GM71C17800C GM71CS17800CL Notes: 1. AC Measurements assume tT = 5ns. 2. An initial pause of 200 us is required after power up followed by a minimum of eight initialization cycles (any combination of cycles containing RAS-only refresh or CAS-beforeRAS refresh). If the internal refresh counter is used, a minimum of eight CAS-before-RAS refresh cycles are required. 3. Operation with the tRCD(max) limit insures that tRAC(max) can be met, tRCD(max) is specified as a reference point only; if tRCD is greater than the specified tRCD(max) limit, then access time is controlled exclusively by tCAC. 4. Operation with the tRAD(max) limit insures that tRAC(max) can be met, tRAD(max) is specified as a reference point only; if tRAD is greater than the specified tRAD(max) limit, then access time is controlled exclusively by tAA. 5. Either tODD or tCDD must be satisfied. 6. Either tDZO or tDZC must be satisfied. 7. VIH (min) and VIL (max) are reference levels for measuring timing of input signals. Also, transition times are measured between VIH (min) and VIL (max). 8. Assumes that tRCD <= tRCD (max) and tRAD <= tRAD (max). If tRCD or tRAD is greater than the maximum recommended value shown in this table, tRAC exceeds the value shown. 9. Measured with a load circuit equivalent to 2TTL loads and 100pF.(VOH =2.4V , VOL= 0.4V) 10. Assumes that tRCD >= tRCD (max) and tRAD <= tRAD (max). 11. Assumes that tRCD <= tRCD (max) and tRAD >= tRAD (max). 12. Either tRCH or tRRH must be satisfied for a read cycles. 13. tOFF (max) and tOEZ (max) define the time at which the outputs achieve the open circuit condition and are not referred to output voltage levels. 14. tWCS, tRWD, tCWD and tAWD and tCPW are not restrictive operating parameters. They are included in the data sheet as electrical characteristics only; if tWCS >=tWCS(min), the cycle is an early write cycle and the data out pin will remain open circuit (high impedance) throughout the entire cycle; if tRWD>=tRWD(min), tCWD>=tCWD(min), and tAWD>=tAWD(min) or tCWD>=tCWD(min), tAWD>=tAWD(min), and tCPW>=tCPW(min), the cycle is a read -modify- write and the data output will contain data read from the selected cell; if neither of the above sets of conditions is satisfied, the condition of the data out (at access time) is indeterminate. 15. These parameters are referred to CAS leading edge in early write cycle and to WE leading edge in a delayed write or a read modify write cycle. 16. tRASP defines RAS pulse width in fast page mode cycles. 17. Access time is determined by the longer of tAA or tCAC or tACP. 18. In delayed write or read-modify-write cycles, OE must disable output buffer prior to applying data to the device. After RAS is reset, if tOEH>=tCWL, the I/O pin will remain open circuit (high impedance): if tOEH<=tCWL, invalid data will be out at each I/O. Rev 0.1 / Apr’01 GM71C17800C GM71CS17800CL Package Dimensions Unit: Inches (mm) 28 SOJ 0.025(0.64) 0.366(9.30) MIN 0.375(9.55) MAX 0.445(11.30) MAX 0.435(11.06) MIN 0.395(10.03) MIN 0.405(10.29) MAX MIN 0.083(2.10) 0.710(18.04) MIN MIN 0.720(18.30) MAX 0.128(3.25) MIN 0.148(3.75) MAX 0.050(1.27) TYP 0.026(0.66) MIN 0.032(0.81) MAX 0.015(0.38) MIN 0.020(0.50) MAX 28 TSOP (TYPE II) 0.720(18.28) MIN 0.008(0.21) MAX 0.037(0.95) MIN 0.041(1.05) MAX 0.047(1.20) MAX Rev 0.1 / Apr’01 0.016(0.40) MIN 0.024(0.60) MAX 0.004(0.12) MIN 0.730(18.54) MAX 0.012(0.30) MIN 0.020(0.50) MAX o 0.471(11.96) MAX 0.455(11.56) MIN 0.394(10.03) MIN 0.405(10.29) MAX 0~5 0.050(1.27) TYP 0.003(0.08) MIN 0.007(0.18) MAX