Frontier Electronics Corp. 667 E. COCHRAN STREET, SIMI VALLEY, CA 93065 TEL: (805) 522-9998 FAX: (805) 522-9989 E-mail: [email protected] Web: http://www.frontierusa.com 2A GENERAL PURPOSE GLASS PASSIVATED RECTIFIER GP20-005G THRU GP20-10G FEATURES z LOW FORWARD VOLTAGE z HIGH CURRENT CAPABILITY z LOW LEAKAGE CURRENT z HIGH SURGE CAPABILITY z GLASS PASSIVATED CHIP JUNCTION 1.0(25.4) MIN .034(0.9) .028(0.7) .300(7.6) .230(5.8) MECHANICAL DATA z CASE: DO15, MOLDED PLASTIC USE UL 94V-0 RECOGNIZED FLAME RETARDANT EPOXY, DIMENSIONS IN INCHES AND (MILLIMETERS) z TERMINAL: AXIAL LEADS, SOLDERABLE PER MIL-STD-202 METHOD 208 z POLARITY: COLOR BAND DENOTES CATHODE z MOUNTING POSITION : ANY z WEIGHT: 0.4 GRAMS .140(3.6) .104(2.6) 1.0(25.4) MIN MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS RATINGS AT 25°C AMBIENT TEMPERATURE UNLESS OTHERWISE SPECIFIED SINGLE PHASE, HALF WAVE, 60 HZ, RESISTIVE OR INDUCTIVE LOAD. FOR CAPACITIVE LOAD, DERATE CURRENT BY 20% GP20 GP20 GP20 GP20 GP20 GP20 GP20 UNITS RATINGS SYMBOL -005G -01G -02G -04G -06G -08G -10G MAXIMUM RECURRENT PEAK REVERSE VOLTAGE VRRM 50 100 200 400 600 800 1000 V MAXIMUM RMS VOLTAGE VRMS 35 70 140 280 420 560 700 V MAXIMUM DC BLOCKING VOLTAGE VDC 50 100 200 400 600 800 1000 V MAXIMUM AVERAGE FORWARD RECTIFIED CURRENT IO 2.0 A 0.375”(9.5mm) LEAD LENGTH AT TA=55°C PEAK FORWARD SURGE CURRENT, 8.3ms SINGLE HALF IFSM 70 A SINE-WAVE SUPERIMPOSED ON RATED LOAD TYPICAL JUNCTION CAPACITANCE (NOTE1) CJ 25 PF TYPICAL THERMAL RESISTANCE (NOTE 2) Rθja 40 ℃/W STORAGE TEMPERATURE RANGE TSTG -55 TO + 175 ℃ OPERATING TEMPERATURE RANGE TOP -55 TO + 175 ℃ ELECTRICAL CHARACTERISTICS (AT TA =25°C UNLESS OTHERWISE NOTED) GP20 CHARACTERISTICS SYMBOL -005G MAXIMUM FORWARD VOLTAGE AT IO DC VF GP20 -01G GP20 -02G GP20 -04G 1.1 GP20 -06G GP20 -08G GP20 -10G UNITS V MAXIMUM REVERSE CURRENT AT 25℃ IR 5 μA MAXIMUM REVERSE CURRENT AT 100℃ IR 50 μA NOTE: 1. MEASURED AT 1MHZ AND APPLIED REVERSE VOLTAGE OF 4.0 VOLTS 2. BOTH LEADS ATTACHED TO HEAT SINK 20×20×1t(mm) COPPER PLATE AT LEAD LENGTH 5mm GP20-005G THRU GP20-10G Page: 1 RATINGS AND CHARACTERISTIC CURVE GP20-005G THRU GP20-10G FIG. 2 -TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG. 1- FORWARD CURRENT DERATING CURVE Single Phase Half Wave 60 Hz Resistive or Inductive Load Inductive load 20 10 INSTANTANEOUS FORWARD CURRENT (A) AVERAGE FORWARD RECTIFIED CURRENT AMPERES 3.0 .375〃(9.5mm) Lead Length 2.0 1.0 4 2 1.0 .4 TJ=25oC Pulse Width=300us 1% Duty Cycle .2 .1 .04 .02 .01 .6 0 25 50 75 100 .8 1.0 1.2 1.4 1.5 INSTANTANEOUS FORWARD VOLTAGE , (V) 125 150 175 AMBIENT TEMPERATURE, oC FIG. 4 - TYPICAL REVERSE CHARACTERISTICS 10 INSTANTANEOUS REVERSE CURRENT,(uA) 100 80 8.3ms Single Half Sine-Wave (JEDEC Method) 60 40 20 4 TJ=100oC 1.0 .4 .1 .04 TJ=25oC .01 0 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) 1 2 4 6 8 10 20 40 60 80100 NUMBER OF CYCLES AT 60Hz FIG. 5 -TYPICAL JUNCTION CAPACITANCE 200 JUNCTION CAPACITANCE-(pF) PEAK FORWARD SURGE CURRENT (A) FIG. 3 -PEAK FORWARD SURGE CURRENT 100 60 40 20 TJ=25oC 10 6 4 2 1 .1 .2 .4 1.0 2 4 10 20 40 100 REVERSE VOLTAGE, (V) GP20-005G THRU GP20-10G Page: 2