GS12U 10 ~ 12W AC-DC Single Output Wall-mounted type series Features : Universal AC input / Full range No load power consumption< 0.3W/240VAC Pass energy star level IV for full series Meet EISA 2007 (Energy Independence and Security Act) 2 pole USA plug Class power (without earth pin) Protections: Short circuit / Overload / Over Voltage / Over temperature Fully enclosed plastic case Approvals: UL / CUL / BSMI / CB / FCC Pass LPS for full series 2 years warranty SPECIFICATION ORDER NO. OUTPUT GS12U05-P1I GS12U07-P1I GS12U09-P1I GS12U12-P1I GS12U15-P1I GS12U18-P1I SAFETY MODEL NO. GS12U05 GS12U07 GS12U09 GS12U12 GS12U15 GS12U18 GS12U24 DC VOLTAGE 5V 7.5V 9V 12V 15V 18V 24V RATED CURRENT 2.0A 1.6A 1.33A 1.0A 0.8A 0.67A 0.5A CURRENT RANGE 0 ~ 2.0A 0 ~ 1.6A 0 ~ 1.33A 0 ~ 1.0A 0 ~ 0.8A 0 ~ 0.67A 0 ~ 0.5A RATED POWER 10W 12W 12W 12W 12W 12.06W 12W 120mVp-p 150mVp-p 180mVp-p 200mVp-p RIPPLE & NOISE (max.) Note.2 75mVp-p GS12U24-P1I 90mVp-p 90mVp-p VOLTAGE TOLERANCE Note.3 5.0% 4.0% 4.0% 3.0% 3.0% 3.0% 3.0% LINE REGULATION Note.4 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% LOAD REGULATION Note.5 5.0% 4.0% 4.0% 3.0% 3.0% 2.0% 2.0% 500ms, 20ms, 10ms/115VAC at full load SETUP, RISE, HOLD UP TIME 500ms, 20ms, 30ms/230VAC 90 ~ 264VAC 135 ~ 370VDC VOLTAGE RANGE FREQUENCY RANGE INPUT 47 ~ 63Hz EFFICIENCY (Typ.) 72% 75% AC CURRENT 0.31A / 115VAC 0.16A / 230VAC INRUSH CURRENT (max.) COLD START 25A / 115VAC LEAKAGE CURRENT (max.) 0.25mA / 240VAC >105% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed OVERLOAD PROTECTION OVER VOLTAGE OVER TEMPERATURE Note.6 76% 77% 79% 80% 80% 45A / 230VAC 115% ~ 135% Protection type : Clamp by zener diode U1 Tj 140 typically (U1) Detect on main control IC Protection type : Shut down o/p voltage, recovers automatically after temperature goes down WORKING TEMP. 0 ~ +50 WORKING HUMIDITY 20% ~ 90% RH non-condensing (Refer to output load derating curve) ENVIRONMENT STORAGE TEMP., HUMIDITY -20 ~ +85 , 10 ~ 95% RH TEMP. COEFFICIENT 0.03% / (0 ~ 40 ) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes VIBRATION UL60950-1, CSA22.2, BSMI CNS14336 approved SAFETY STANDARDS WITHSTAND VOLTAGE SAFETY & ISOLATION RESISTANCE EMC EMI CONDUCTION & RADIATION HARMONIC CURRENT EMS IMMUNITY MTBF OTHERS CONNECTOR NOTE I/P-O/P:3KVAC I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH Compliance to FCC part15 class B, EN55022, EN61204-3 class B, BSMI CNS13438 Compliance to EN61000-3-2,3 Compliance to EN61000-4-2,3,4,5,6,8,11, ENV50204, EN61204-3, light industry level, criteria A 1414.6Khrs min. MIL-HDBK-217F (25 ) DIMENSION PACKING 65*47*26.5mm (L*W*H) 0.15Kg ; 100pcs / 16Kg / CARTON PLUG Standard type P1I: 2.1 CABLE Standard type UL1185 6ft (4FT only for 5V output) for stock ; Other type available by customer requested * 5.5 * 9.5mm turning fork type, center positive for stock ; Other type available by customer requested 1.All parameters are specified at 115VAC input, rated load, 25 70% RH Ambient. 2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 3.Tolerance: includes set up tolerance, line regulation, load regulation. 4.Line regulation is measured from low line to high line at rated load. 5.Load regulation is measured from 10% to 100% rated load. 6.The over temperature protection (OTP) is the built-in function of the control IC (U1). The activating level described above is based on the specification provided by the IC manufacturer. File Name:GS12U-SPEC 2008-05-06 GS12U 10 ~ 12W AC-DC Single Output Wall-mounted type Mechanical Specification series Unit:mm UL1185 18AWG 1230 50mm for 5V UL1185 18AWG 1830 50mm for others 17 1 26.5 1 30 10mm 6.3 0.3 65 1 47 1 ID 2.1 x OD 5.5 C"+" 9.5 0.5mm Plug Assignment Standard plug: P1I (option) P1I 1.5 0.2 P/N OUTPUT CENTER + 12.7 0.4 Derating Curve Static Characteristics(24V) OUTPUT VOLTAGE (V) LOAD (%) 100 70 0 10 20 30 Ta ( 40 ) 50 300 28 250 24 200 20 150 16 100 12 50 8 25 50 70 90 110 120 140 160 180 200 220 240 OUTPUT RIPPLE (mVp-p) Ta=25 32 264 INPUT VOLTAGE(VAC)60Hz File Name:GS12U-SPEC 2008-05-06