Ultra-Thin Rockers Series GW Distinctive Characteristics Various colored rockers and paddles. Combination of dust cover and closely fit housing, actuator, and interior pivot provides protection for contacts. Detent mechanism design of coil spring, plunger, and plastic detent results in crisp and positive actuation. Extremely thin size allows high density PCB mounting and makes these switches ideal for handheld equipment. Award-winning STC contact mechanism with benefits unavailable in conventional mechanisms: smoother, positive detent actuation, increased contact stability and unparalleled logic-level reliability. (Additional STC details in Terms & Acronyms; see Supplement section.) Molded-in, epoxy sealed terminals lock out flux and other contaminants. .100” x .100” (2.54mm x 2.54mm) terminal spacing conforms to standard PC board grid spacing for straight and angle mounting. Actual Size NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Ultra-Thin Rockers Series GW General Specifications Electrical Capacity (Resistive Load) Logic Level: Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Nominal Operating Force: Angle of Throw: Materials & Finishes Actuator: Case: Sealing Ring: Movable Contact: Stationary Contacts: Base: Mounting Bracket: Terminals: Environmental Data Operating Temperature Range: Humidity: Vibration: Shock: PCB Processing Soldering: Cleaning: Standards & Certifications Flammability Standards: UL Recognition or CSA Certification: 0.4VA maximum @ 28V AC/DC maximum (Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V) Note: Find additional explanation of operating range in Supplement section. 80 milliohms maximum 500 megohms minimum @ 500V DC 500V AC minimum for 1 minute minimum 50,000 operations minimum 50,000 operations minimum For Rockers 1.70N; for Paddles 1.30N 28° Glass fiber reinforced polyamide (UL94V-0) Glass fiber reinforced polyamide (UL94V-0) Nitrile butadiene rubber Phosphor bronze with gold plating Phosphor bronze with gold plating Glass fiber reinforced polyamide (UL94V-0) Phosphor bronze with tin plating Phosphor bronze with gold plating –30°C through +85°C (–22°F through +185°F) 90 ~ 95% humidity for 240 hours @ 40°C (104°F) 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 1 minute; 3 right angled directions for 2 hours 50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction) Wave Soldering Recommended: See Profile A in Supplement section. Manual Soldering: See Profile A in Supplement section.. These devices are not process sealed. Hand clean locally using alcohol based solution. UL94V-0 actuator & case/base The GW Series rockers have not been tested for UL recognition or CSA certification. These switches are designed for use in a low-voltage, low-current, logic-level circuit. When used as intended in a logic-level circuit, the results do not produce hazardous energy. NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Series GW Ultra-Thin Rockers TYPICAL SWITCH ORDERING EXAMPLE GW 1 2 C R P PC TERMINALS ACTUATOR COLORS ACTUATORS POLES 1 CIRCUIT SPDT 2 DPDT 2 ON NONE ON B White P Straight R Rocker C Red H Right Angle L Paddle H Gray V Vertical DESCRIPTION FOR TYPICAL ROCKER ORDERING EXAMPLE GW12RCP Red Rocker Cap SPDT ON-NONE-ON Circuit Straight PC Terminals POLES & CIRCUIT Rocker Position Connected Terminals Throw & Schematics Note: Terminal numbers are not actually on the switch. Up Center Down Up Center Down Pole Model SP GW12 ON NONE ON 5-6 OPEN 5-4 SPDT DP GW22 ON NONE ON 5-6 2-3 OPEN 5-4 2-1 DPDT 5 (COM) 4 6 5 4 2 (COM) 6 1 3 TYPICAL SWITCH DIMENSIONS Straight PC (0.25) Typ .010 (3.0) .118 (7.0) .276 (1.35) .053 P/N This Side (0.4) Dia Typ .016 Single Pole 1 3 (0.25) Typ .010 6 (2.54) .100 4 (4.5) .177 (2.3) .091 (7.0) .276 (2.54) Typ .100 5 (2.54) Typ .100 6 (2.6) .102 (2.54) .100 (0.6) Dia Typ .024 On single pole models positions 1 & 3 are support pins. GW12RCP Straight PC 4 5 28° (0.25) Typ .010 (7.0) .276 (2.6) .102 (0.25) Typ .010 Double Pole (3.0) .118 P/N This Side (0.4) Dia Typ .016 28° 1 4 2 5 3 6 (2.54) .100 (2.54) Typ .100 (4.5) .177 (3.8) .150 (7.0) .276 (2.6) .102 (2.54) .100 4 1 5 2 6 3 (2.54) Typ .100 (0.6) Dia Typ .024 GW22LCP NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Ultra-Thin Rockers Series GW TYPICAL SWITCH DIMENSIONS Right Angle PC Single Pole 28° (7.0) .276 (0.25) .010 P/N This Side (0.5) Typ .020 (2.54) Typ .100 4 (4.5) .177 (3.0) .118 (5.15) .203 (2.9) .114 (2.75) .108 (5.08) .200 (7.5) .295 6 5 6 (5.08) .200 4 (0.25) .010 (5.08) .200 (7.68) .302 (2.3) .091 5 (0.6) Dia Typ .024 (0.4) Dia Typ .016 (2.54) Typ .100 GW12RCH Right Angle PC Double Pole 28° (7.0) .276 (0.25) .010 P/N This Side 3 (3.0) .118 (5.15) .203 (2.9) .114 (0.5) Typ .020 GW22LCH 2 1 (2.54) Typ .100 (4.5) .177 (2.6) .102 (2.75) .108 (5.08) .200 (7.5) .295 (3.8) .150 Vertical PC (0.25) .010 (5.08) .200 (10.22) .402 6 5 2 3 4 5 6 (0.6) Dia Typ .024 4 (0.5) .020 (2.54) .100 1 (2.54) .100 (5.08) .200 (0.4) Dia Typ .016 (2.54) Typ .100 Single Pole (0.25) Typ .010 (4.5) .177 (1.35) .053 P/N This Side 4 (7.65) .301 (4.15) .163 5 28° (0.25) .010 (5.0) .197 (5.08) .200 (12.76) .502 (2.3) .091 GW12RCV Vertical PC (2.54) Typ .100 5 6 6 (2.75) .108 (0.5) Typ .020 (2.54) .100 (2.54) .100 4 (0.6) Dia Typ .024 (0.5) Typ .020 (2.54) Typ .100 (5.08) .200 (0.4) Dia .016 (1.27) .050 CL Double Pole (0.25) Typ .010 (4.5) .177 (7.65) .301 (4.15) .163 P/N This Side 28° 1 2 4 5 3 6 (2.75) .108 (0.5) Typ .020 (2.54) .100 (0.25) .010 (5.0) .197 (3.8) .150 (5.08) .200 (12.76) .502 (0.5) Typ .020 (2.54) Typ .100 (2.54) .100 4 1 5 2 6 3 (0.6) Dia Typ .024 (2.54) Typ .100 (5.08) .200 (0.4) Dia .016 (2.54) .100 GW22LCV NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07