HCF40106B HEX SCHMITT TRIGGER ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ SCHMITT TRIGGER ACTION WITH NO EXTERNAL COMPONENTS HYSTERESIS VOLTAGE (Typ.) : 0.9V at VDD = 5V 2.3V at VDD = 10V 3.5V at VDD = 15V NOISE IMMUNITY GREATER THAN 50% NO LIMIT ON INPUT RISE AND FALL TIME LOW VDD TO VSS CURRENT DURING SLOW INPUT RAMP STANDARDIZED SYMMETRICAL OUTPUT CHARACTERISTICS QUIESCENT CURRENT SPECIFIED UP TO 20V 5V, 10V AND 15V PARAMETRIC RATINGS INPUT LEAKAGE CURRENT II = 100nA (MAX) AT VDD = 18V TA = 25°C 100% TESTED FOR QUIESCENT CURRENT MEETS ALL REQUIREMENTS OF JEDEC JESD13B " STANDARD SPECIFICATIONS FOR DESCRIPTION OF B SERIES CMOS DEVICES" DESCRIPTION The HCF40106B is a monolithic integrated circuit fabricated in Metal Oxide Semiconductor technology available in DIP and SOP packages. DIP SOP ORDER CODES PACKAGE TUBE T&R DIP SOP HCF40106BEY HCF40106BM1 HCF40106M013TR The HCF40106B consist of six Schmitt trigger circuits. Each circuit functions as an inverter with Schmitt trigger action on the input. The trigger switches at different points for positive and negative going signals. The difference between the positive going voltage (VP) and the negative going voltage (VN) is defined as hysteresis voltage (VH). PIN CONNECTION September 2001 1/9 HCF40106B INPUT EQUIVALENT CIRCUIT PIN DESCRIPTION PIN No SYMBOL NAME AND FUNCTION 1, 3, 5, 9, 11, A, B, C, D, E, Data Inputs 13 F 2, 4, 6, 8, 10, G, H, I, J, K, Data Outputs 12 L VSS Negative Supply Voltage 7 VDD 14 Positive Supply Voltage TRUTH TABLE FUNCTIONAL DIAGRAM 2/9 INPUTS OUTPUTS A to F G to L L H H L HCF40106B LOGIC DIAGRAM ABSOLUTE MAXIMUM RATINGS Symbol VDD Parameter Supply Voltage VI DC Input Voltage II DC Input Current PD Value Unit -0.5 to +22 V -0.5 to VDD + 0.5 ± 10 V mA 200 100 mW mW Top Power Dissipation per Package Power Dissipation per Output Transistor Operating Temperature -55 to +125 °C Tstg Storage Temperature -65 to +150 °C Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these conditions is not implied. All voltage values are referred to VSS pin voltage. RECOMMENDED OPERATING CONDITIONS Symbol VDD Parameter Supply Voltage VI Input Voltage Top Operating Temperature Value Unit 3 to 20 V 0 to VDD V -55 to 125 °C 3/9 HCF40106B DC SPECIFICATIONS Test Condition Symbol IL VOH VOL VP VN VH IOH IOL II CI Parameter Quiescent Current High Level Output Voltage Low Level Output Voltage VI (V) VO (V) |IO| (µA) 0/5 0/10 0/15 0/20 0/5 0/10 0/15 5/0 10/0 15/0 <1 <1 <1 <1 <1 <1 <1 Any Input 18 <1 <1 <1 <1 <1 <1 Negative Trigger Threshold Voltage Hysteresis Voltage Output Sink Current Input Leakage Current Input Capacitance 0/5 0/5 0/10 0/15 0/5 0/10 0/15 0/18 VDD (V) 5 10 15 20 5 10 15 5 10 15 5 10 15 5 10 15 5 10 15 5 5 10 15 5 10 15 Positive Trigger Threshold Voltage Output Drive Current Value 2.5 4.6 9.5 13.5 0.4 0.5 1.5 Any Input TA = 25°C Min. Typ. Max. 0.02 0.02 0.02 0.04 1 2 4 20 4.95 9.95 14.95 2.2 4.6 6.8 0.9 2.5 4 0.3 1.2 1.6 -1.36 -0.44 -1.1 -3.0 0.44 1.1 3.0 -40 to 85°C -55 to 125°C Min. Min. Max. 30 60 120 600 4.95 9.95 14.95 0.05 0.05 0.05 2.9 5.9 8.8 1.9 3.9 5.8 0.9 2.3 3.5 -3.2 -1 -2.6 -6.8 1 2.6 6.8 3.6 7.1 10.8 2.8 5.2 7.4 1.6 3.4 5 ±10-5 ±0.1 5 7.5 2.2 4.6 6.8 0.9 2.5 4 0.3 1.2 1.6 -1.15 -0.36 -0.9 -2.4 0.36 0.9 2.4 Max. 30 60 120 600 4.95 9.95 14.95 0.05 0.05 0.05 3.6 7.1 10.8 2.8 5.2 7.4 1.6 3.4 5 2.2 4.6 6.8 0.9 2.5 4 0.3 1.2 1.6 -1.1 -0.36 -0.9 -2.4 0.36 0.9 2.4 ±1 Unit µA V 0.05 0.05 0.05 3.6 7.1 10.8 2.8 5.2 7.4 1.6 3.4 5 V V V V mA mA ±1 µA pF The Noise Margin for both "1" and "0" level is: 1V min. with VDD =5V, 2V min. with VDD=10V, 2.5V min. with VDD=15V DYNAMIC ELECTRICAL CHARACTERISTICS (Tamb = 25°C, CL = 50pF, RL = 200KΩ, tr = tf = 20 ns) Test Condition Symbol Parameter tPLH tPHL Propagation Delay Time tTLH tTHL Output Transition Time VDD (V) 5 10 15 5 10 15 (*) Typical temperature coefficient for all VDD value is 0.3 %/°C. 4/9 Value (*) Min. Unit Typ. Max. 140 70 60 100 50 40 280 140 120 200 100 80 ns ns HCF40106B TYPICAL APPLICATIONS ASTABLE MULTIVIBRATOR MONOSTABLE MULTIVIBRATOR WAVE SHAPER 5/9 HCF40106B TEST CIRCUIT CL = 50pF or equivalent (includes jig and probe capacitance) RL = 200KΩ RT = ZOUT of pulse generator (typically 50Ω) WAVEFORM : PROPAGATION DELAY TIMES (f=1MHz; 50% duty cycle) 6/9 HCF40106B Plastic DIP-14 MECHANICAL DATA mm. inch DIM. MIN. a1 0.51 B 1.39 TYP MAX. MIN. TYP. MAX. 0.020 1.65 0.055 0.065 b 0.5 0.020 b1 0.25 0.010 D 20 0.787 E 8.5 0.335 e 2.54 0.100 e3 15.24 0.600 F 7.1 0.280 I 5.1 0.201 L Z 3.3 1.27 0.130 2.54 0.050 0.100 P001A 7/9 HCF40106B SO-14 MECHANICAL DATA DIM. mm. MIN. TYP A a1 inch MAX. MIN. TYP. 1.75 0.1 0.068 0.2 a2 MAX. 0.003 0.007 1.65 0.064 b 0.35 0.46 0.013 0.018 b1 0.19 0.25 0.007 0.010 C 0.5 0.019 c1 45° (typ.) D 8.55 8.75 0.336 0.344 E 5.8 6.2 0.228 0.244 e 1.27 0.050 e3 7.62 0.300 F 3.8 4.0 0.149 0.157 G 4.6 5.3 0.181 0.208 L 0.5 1.27 0.019 0.050 M S 0.68 0.026 8° (max.) PO13G 8/9 HCF40106B Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. © The ST logo is a registered trademark of STMicroelectronics © 2001 STMicroelectronics - Printed in Italy - All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - China - Finland - France - Germany - Hong Kong - India - Italy - Japan - Malaysia - Malta - Morocco Singapore - Spain - Sweden - Switzerland - United Kingdom © http://www.st.com 9/9