HE850 220/380VAC 3∅, 4W FEATURES • • • • • • • • • • • SECONDARY SURGE "LIGHTNING" ARRESTER Industrial/Commercial Version MOV Circuit Design Made in America utilizing American Components Cost Effective Reliable Solid-State Protection Maintenance Free Molded Plastic Case Threaded 1/2" NPT conduit nipple with locknut 18 " Stranded 12 AWG color coded leads Suitable for indoor or outdoor installation Automatic Recovery, Self Restoring DESCRIPTION The HE850 is a MOV (Metal Oxide Varistor) based hardwired Secondary Surge Arrester, often referred to as a Lightning Arrester. The device is designed to protect electrical equipment from damaging effects of Spikes (+) and Notches (-) caused by lightning, utility switching, insulation arcing, electrical motor cycling, and other large or sudden changes in electrical power flow on incoming AC power lines. The HE850 is a three phase, four wire arrester intended to protect 220/380 VAC systems. The epoxy encapsulated arrester is designed to be easily installed in any position indoors or outdoors utilizing the integral 1/2" threaded nipple and supplied metal lock nut. The housing is molded from flame retardant plastic that is both weather and UV resistant, and complies with the UL standard for strength and flame resistance properties. The arrester is sealed with UL component recognized epoxy potting compound. The HE850 has four 18" long, 12 AWG multi-stranded leads that are color coded for ease of installation. The HVPSI HE850 is ideal protection for outdoor lighting and pole lamps, panelboards, oilfield pumps, workshops, irrigation and sump pumps, refrigeration systems, farm equipment including milking machines and poultry processing equipment, electric motors and controls, heat pumps and air conditioning equipment and many other electrical devices. The HE850 utilizes a single MOV per pole to reduce the potential load balancing/sharing problems during operation. UL listed versions: HE500 HE510 HE1203 HE4803 120/240V, 120/240V, 120/208V, 277/480V, Single Phase, Three Wire, Single Phase, Three Wire, Three Phase, Four Wire, Three Phase, Four Wire, Industrial/Commercial Version. Residential Version. Industrial/Commercial Version. Industrial/Commercial Version. Rev 1 November 2007 PO Box 700968 ● Dallas TX 75370 Ph (972) 248-7691 ● Fax (972) 381-9998 HE850 ELECTRICAL CHARACTERISTICS PART NUMBER SERVICE VOLTAGE AC PHASE WIRE CONFIGURATION HE850 220/380V 300V Max (rms) THREE Line 1 (Black) Line 2 (Black) Line 3 (Black) Neutral/Ground (White) TYPICAL CLAMP VOLTAGE 8 X 20uS Current Wave (Line to Ground) 1.5kA 5kA 10kA 20kA 25kA 775V(1) 875V(2) 950V(1) 1250V(2) 1125V(1) 1750V(2) 1300V(1) 2550V(2) 1425V(1) 2950V(2) (1) 1" leads (2) 18" leads Formerly HE800 (eur) DIMENSIONS AND WIRING DIAGRAMS ARCHITECT and ENGINEERS SUGGESTED SPECIFICATIONS The three phase, four wire Secondary Surge Arrester for 220/380 volt “Wye” AC service or machine equipment shall be a High Voltage Power Systems Model HE850. The lightning arrester shall be of a single MOV per pole design and provide protection for Category C Transient Surges as defined in ANSI C62.41 (Formerly IEEE Std. 587-1980) without degradation of the components. The surge protector shall protect between each line and neutral/ground conductor. The enclosure shall be molded of fire retardant plastic. The unit will be sealed with a UL component recognized epoxy potting compound to minimize moisture and pollution intrusion. A one-half inch conduit nipple and metal lock nut shall be provided. 18 inch, stranded 12 gauge color coded leads shall be provided. The arrester shall carry a one year warrantee. HIGH VOLTAGE POWER SYSTEMS, INC. reserves the right to make changes in these specifications at any time and without notice in order to supply the best product possible. © 2002 • HIGH VOLTAGE POWER SYSTEMS, INC. • Printed in U.S.A. SPECIFICATIONS and STANDARDS TECHNOLOGY: Metal Oxide Varistors (MOV) each line to neutral/ground. PEAK SURGE CURRENT: (8x20uS) 25,000 Amps M C O V: 300 VAC rms (Line to Neutral). ENCLOSURE: Black molded flame retardant plastic housing with 1/2" x 20 threaded nipple. The housing is weatherproof and UV resistant. ENCAPSULATION: UL component recognized epoxy potting material. WIRING: Four 12 gauge stranded color coded leads. Black for each line White for neutral/ground OPERATION TEMPERATURE: -40°C to +85°C RESPONSE TIME: <5ns CURRENT DRAIN: <100uA UNIT WEIGHT: 8.5 ounces SHIPPING WEIGHT: per arrester 9.5 ounces per carton (12) 7.5 lbs. per case (48) 31 lbs ANSI : C62.11-1987 PO Box 700968 ● Dallas TX 75370 Ph (972) 248-7691 ● Fax (972) 381-9998