Certificate TH97/10561QM HFR180 Certificate TW00/17276EM GLASS PASSIVATED HIGH VOLTAGE FAST RECOVERY RECTIFIER PRV : 8000 Volts Io : 0.3 Ampere DO - 41 FEATURES : * * * * * * Glass pasivated junction chip High surge current capability High voltage capability High reliability Low reverse current Pb / RoHS Free 1.00 (25.4) MIN. 0.108 (2.74) 0.078 (1.99) 0.205 (5.20) 0.161 (4.10) MECHANICAL DATA : 1.00 (25.4) MIN. 0.034 (0.86) 0.028 (0.71) * Case : DO-41 Molded plastic * Epoxy : UL94V-O rate flame retardant * Lead : Axial lead solderable per MIL-STD-202, Method 208 guaranteed * Polarity : Color band denotes cathode end * Mounting position : Any * Weight : 0.34 gram Dimensions in inches and ( millimeters ) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25 °C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. RATING SYMBOL VALUE UNIT Maximum Repetitive Peak Reverse Voltage VRRM 8000 V Maximum RMS Voltage VRMS 5600 V Maximum DC Blocking Voltage VDC 8000 V Maximum Average Forward Current at Ta = 50 °C IF(AV) 300 mA IFSM 40 A Maximum Peak Forward Voltage at I F = 300 mA VF 9.0 V Maximum DC Reverse Current Ta = 25 °C IR 5.0 μA at Rated DC Blocking Voltage Ta = 100 °C IR(H) 50 μA Maximum Reverse Recovery Time ( Note 1 ) Trr 200 ns Junction Temperature Range TJ - 40 to + 150 °C Storage Temperature Range TSTG - 40 to + 150 °C Maximum Peak Forward Surge Current , 8.3ms Single half sine wave Superimposed on rated load (JEDEC Method) Note : (1) Reverse Recovery Test Conditions : IF = 0.5 A, I R = 1.0 A, Irr = 0.25 A. Page 1 of 2 Rev. 00 : November 12, 2007 Certificate TH97/10561QM Certificate TW00/17276EM RATING AND CHARACTERISTIC CURVES ( HFR180 ) FIG.1 - DERATING CURVE RECTIFIED CURRENT FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 40 PEAK FORWARD SURGE CURRENT, (A) AVERAGE FORWARD CURRENT, (A) 0.30 0.24 0.18 0.12 0.06 0 0 25 50 75 100 125 150 32 24 16 8 0 175 1 AMBIENT TEMPERATURE, ( °C) 6 10 20 40 60 100 FIG.4 - TYPICAL REVERSE CHARACTERISTICS 10 100 REVERSE CURRENT, (μA) FORWARD CURRENT, (A) 4 NUMBER OF CYCLES AT 60Hz FIG.3 - TYPICAL FORWARD CHARACTERISTICS 1.0 0.1 TJ = 25 °C Pulse Width = 300 μs 1% Duty Cycle TJ = 100 °C 10 1.0 TJ = 25 °C 0.1 0.01 0 2.0 4.0 6.0 8.0 10 12 14 16 FORWARD VOLTAGE, (V) Page 2 of 2 2 18 20 0 20 40 60 80 100 120 140 PERCENT OF RATED REVERSE VOLTAGE, (%) Rev. 00 : November 12, 2007