1N5400G - 1N5408G GLASS PASSIVATED JUNCTION SILICON RECTIFIERS PRV : 50 - 1000 Volts Io : 3.0 Amperes DO - 201AD FEATURES : * * * * * * Glass passivated chip High current capability High reliability Low reverse current Low forward voltage drop Pb / RoHS Free 1.00 (25.4) MIN. 0.21 (5.33) 0.19 (4.83) 0.375 (9.53) 0.285 (7.24) MECHANICAL DATA : 1.00 (25.4) MIN. 0.052 (1.32) 0.048 (1.22) * Case : DO-201AD Molded plastic * Epoxy : UL94V-O rate flame retardant * Lead : Axial lead solderable per MIL-STD-202, Method 208 guaranteed * Polarity : Color band denotes cathode end * Mounting position : Any * Weight : 1.16 grams Dimensions in inches and ( millimeters ) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25 °C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. RATING SYMBOL 1N5400G 1N5401G 1N5402G 1N5404G 1N5406G 1N5407G 1N5408G UNIT Maximum Repetitive Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V Maximum Average Forward Current 0.375"(9.5mm) Lead Length Ta = 75 °C Peak Forward Surge Current 8.3ms Single half sine wave Superimposed on rated load (JEDEC Method) Maximum Forward Voltage at IF = 3.0 Amps. IF(AV) 3.0 A IFSM 150 A VF 1.0 V Maximum DC Reverse Current Ta = 25 °C IR 5.0 µA at rated DC Blocking Voltage Ta = 100 °C IR(H) 50 µA CJ 50 pF RθJA 15 °C/W Junction Temperature Range TJ - 65 to + 175 °C Storage Temperature Range TSTG - 65 to + 175 °C Typical Junction Capacitance (Note1) Typical Thermal Resistance (Note2) Notes : (1) Measured at 1.0 MHz and applied reverse voltage of 4.0VDC (2) Thermal resistance from Junction to Ambient at 0.375" (9.5mm) Lead Lengths, P.C. Board Mounted. Page 1 of 2 Rev. 02 : March 31, 2005 FIG.1 - DERATING CURVE FOR OUTPUT RECTIFIED CURRENT FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 150 3.0 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD OUTPUT CURRENT, AMPERES RATING AND CHARACTERISTIC CURVES ( 1N5400G - 1N5408G ) 2.4 1.8 1.2 0.6 0 0 25 50 75 100 125 150 Ta = 25 °C 120 90 60 30 0 175 1 2 CASE TEMPERATURE, ( °C) 100 FORWARD CURRENT, AMPERES 6 10 20 40 60 100 FIG 4 . - TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE, (pF) FIG.3 - TYPICAL FORWARD CHARACTERISTICS 10 Pulse Width = 300 µs 2% Duty Cycle 1.0 4 NUMBER OF CYCLES AT 60Hz TJ = 25 °C 100 TJ = 25 °C 50 10 5 1 1 2 4 10 20 40 100 REVERSE VOLTAGE, VOLTS 0.1 FIG. 5 - TYPICAL REVERSE CHARACTERISTICS 10 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 FORWARD VOLTAGE, VOLTS 1.8 2.0 Ta = 100 ฐC REVERSE CURRENT, MICROAMPERES 0.01 0 1.0 0.1 Ta = 25 ฐC 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED REVERSE VOLTAGE, (%) Page 2 of 2 Rev. 02 : March 31, 2005