D E NU I T N O Product Data Sheet C S DI 1 WATT UNREGULATED DC/DC CONVERTER HL01U FEATURES L LOW COST L INTERNAL FILTERING L SURFACE MOUNT CONSTRUCTION L TEMPERATURE RANGE: -25°C TO +70°C L HIGH EFFICIENCY L NON-CONDUCTIVE CASE L SURFACE MOUNT PACKAGE (SMD) DESCRIPTION manufacturing technologies. The HL01U Series offers an extensive selection of input and output voltages to choose from. These miniature, unregulated DC/DC converters come in 24-pin DIP and SMD packages. This small size is possible through the use of surface mount The HL01U Series utilizes a 125KHz push-pull oscillator in the input stage with internal filtering to reduce the output noise. ABSOLUTE MAXIMUM RATINGS ORDERING INFORMATION Internal Power Dissipation..................................................................30 Sec Short Circuit Duration..................................................................Momentary Lead Temperature (soldering, 10 seconds max)..............................+300°C * * Note: Refer to Reflow Profile for SMD Models. HL01U revE, 12/08 The use of surface mount construction and automated manufacturing processes increase consistency and reliability while reducing overall cost. HL01U xxyzz Y/Z /H Device Family HL Indicates DC/DC Converter Model Number Where: xx = Input Voltage y = Number or Outputs (Single "S", Dual "D") zz = Output Voltage Package Option Screening Option DIP Package only Page 1 ELECTRICAL SPECIFICATIONS Specifications typical at T = +25°C, nominal input voltage, rated output current unless otherwise specified. A NOMINAL RATED INPUT MODEL RATED OUTPUT VOLTAGE VOLTAGE INPUT CURRENT OUTPUT CURRENT NO LOAD RATED LOAD (mA) EFFICIENCY (VDC) (VDC) (mA) (mA) (%) HL01U05S05 HL01U05S12 HL01U05S15 5 5 5 5 12 15 200 83 67 30 30 30 300 260 260 70 74 74 HL01U12S05 HL01U12S12 HL01U12S15 12 12 12 5 12 15 200 83 67 25 25 25 120 120 120 67 70 70 HL01U15S05 HL01U15S12 HL01U15S15 15 15 15 5 12 15 200 83 67 20 20 20 100 100 100 67 70 70 HL01U24S05 HL01U24S12 HL01U24S15 24 24 24 5 12 15 200 83 67 15 15 15 65 65 65 67 70 70 HL01U05D05 HL01U05D12 HL01U05D15 5 5 5 ±5 ±12 ±15 ±100 ±41 ±33 30 30 30 300 260 260 70 74 74 HL01U12D05 HL01U12D12 HL01U12D15 12 12 12 ±5 ±12 ±15 ±100 ±41 ±33 25 25 25 120 120 120 67 70 70 HL01U15D05 HL01U15D12 HL01U15D15 15 15 15 ±5 ±12 ±15 ±100 ±41 ±33 20 20 20 100 100 100 67 70 70 HL01U24D05 HL01U24D12 HL01U24D15 24 24 24 ±5 ±12 ±15 ±100 ±41 ±33 15 15 15 65 65 65 67 70 70 MIN TYP MAX UNITS 4.5 10.8 13.5 22.6 5 12 15 24 30 5.5 13.2 16.5 26.4 100 VDC COMMON SPECIFICATIONS Specifications typical at T = +25°C, nominal input voltage, rated output current unless otherwise specified. A PARAMETER CONDITIONS INPUT Voltage Range Reflected Ripple Current ISOLATION Rated Voltage Test Voltage Resistance Capacitance Leakage Current OUTPUT Rated Power Voltage Setpoint Accuracy Temperature Coefficent Ripple & Noise Line Regulation Load Regulation 5 Vout Models All Others GENERAL Switching Frequency Package Weight MTTF per MIL-HDBK-217, Rev. F Ground Benign TEMPERATURE Specification Operation Storage Page 2 60 Hz, 10 Seconds 500 500 VDC mAp-p VDC Vpk G7 pF μArms VISO= 240VAC, 60Hz 1 25 2 BW = DC to 10MHz BW =10Hz to 2MHz High Line to Low Line 1 ±3 ±0.02 50 10 1 ±1.5 W % %/°C mVp-p mVrms %/% 25% Rated Load to Rated Load 10% Rated Load to Rated Load ±5 ±3 ±10 ±10 % % Circuit Stress Method TA = +25°C TA = +70°C -25 -40 -40 ±5 100 125 12 kHz g 1100 550 kHr kHr +70 +85 +110 °C °C °C HL01U revE,12/08 MECHANICAL Package/Pinout "Y" and "Z" TOP VIEWS HL01UxxyzzY HL01UxxyzzZ SIDE VIEWS END VIEWS DIP PACKAGE SMD PACKAGE NU = Do Not Use. NC = No Internal Connection. Duplicate pin functions are internally connected. All dimensions are in inches (millimeters). GRID: 0.100 inches (2.54 millimeters) Typically Marked with: specific model ordered, date code, job code and Logo. RECOMMENDED LAND PATTERN HL01U revE, 12/08 PIN CONNECTIONS PIN# SINGLES DUALS 1 2 3 +VIN NU NU +VIN -VOUT Common 10 11 12 -VOUT +VOUT -VIN Common +VOUT -VIN 13 14 15 -VIN +VOUT -VOUT -VIN +VOUT Common 22 23 24 NU NU +VIN Common -VOUT +VIN RECOMMENDED REFLOW PROFILE Page 3 TYPICAL PERFORMANCE CURVES SAFE OPERATING AREA NOTES: 1.) When operated within the SAFE OPERATING AREA as defined by the above curves, the output voltage of HL01U devices is guaranteed to be within 95% of its steady-state value within 100 milliseconds after the input voltage has reached 95% of its steadystate value. 2.) For dual output models, total load capacitance is the sum of the capacitances on the plus and minus outputs. Murata Power Solutions, Inc. 11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A. Tel: (508) 339-3000 (800) 233-2765 Fax: (508) 339-6356 USA: Mansfield (MA), Tel: (508) 339 3000, email: [email protected] Canada: Toronto, Tel: (866) 740 1232, email: [email protected] UK: Milton Keynes, Tel: +44 (0)1908 615232, email: [email protected] France: Montigny Le Bretonneux, Tel: +33 (0)1 34 60 01 01, email: [email protected] Germany: München, Tel: +49 (0)89-544334-0, email: [email protected] Japan: Tokyo, Tel: 3-3779-1031, email: [email protected] Osaka, Tel: 6-6354-2025, email: [email protected] China: Shanghai, Tel: +86 215 027 3678, email: [email protected] Guangzhou, Tel: +86 208 221 8066, email: [email protected] www.murata-ps.com email: [email protected] ISO 9001 & ISO 14001 REGISTERED Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without notice. © 2008 Murata Power Solutions, Inc. Page 4 Singapore: Parkway Centre, Tel: +65 6348 9096, email: [email protected] HL01U revE,12/08