SENSITRON SEMICONDUCTOR 1N6510 TECHNICAL DATA DATA SHEET 4207, REV. - Isolated Diode Array Applications: High Frequency Data Lines RS-323 & RS-432 Networks LAN, Ethernet, I/O Ports IEC61000-4 compatible for ESD / EFT / Surge Features: Protects up to 8 I/O Ports Isolated diodes eliminate crosstalk High Density Packaging High Breakdown Voltage; High Speed Switching (< 10 nsec) Low Capacitance; Low Leakage Hermetic Ceramic package TX, TXV, S level screening available Maximum Ratings: o All ratings are at 25 C unless otherwise noted Characteristics Symbol Condition Reverse Breakdown Voltage VBR Per diode, Pulsed @ IR = 5 A Pw=300 s +/- 50µs; duty < 2% o Continuous Forward Current IF Per diode, Derate at 2.4 mA/ C o above 25 C Peak Surge Current IFSM Per diode, tp=8.3 msec Power Dissipation PD Per Junction Power Dissipation PD Per Package, Derate at o o 4 mW/ C above 25 C Max. Operating Temperature TJ Max. Storage Temperature Tstg - Electrical Characteristics: Max. 75 Units Vdc 300 mA 500 400 500 mA mW mW -65 to +150 -65 to +200 C C Max. Units o All ratings are per diode and at 25 C unless otherwise noted Characteristics Symbol Condition Max. Forward Voltage Drop VF1 IF = 100mA, Pulsed: Pw=300µs +/- 50µs; duty cycle < 2% 1.00 V Max. Reverse Current IR1 IR2 @VR = 40V @VR = 20V 0.1 25 µA nA CT @VR = 0V, F=1MHz 4.0 pF TFR IF = 100mA 15 ns 10 ns 5 mV Max. Capacitance (Pin to Pin) Max. Forward Recovery Time Max. Reverse Recovery Time Max. Forward Voltage Match TRR VF5 If = IR = 10mA, iRR = 1mA, RL = 100 ohms If = 10mA © 2004 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected] 1N6510 SENSITRON TECHNICAL DATA DATA SHEET 4207, REV. - Mechanical Dimensions: in inches / mm Electrical Schematic © 2004 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected] 1N6510 SENSITRON TECHNICAL DATA DATA SHEET 4207, REV. - DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. © 2004 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected]