Electrical / Environmental Sr RCoompH liant fo ls Shielded Drum Compact Package Low Cost Inductors ode ‘LF’ M • • • • 280 ,847, US 6 Operating Temperature Range Ambient Temperature, Maximum Temperature Rise, Maximum Insulation System -40°C to +155°C 100°C 50°C Class F, 155°C Specifications 100 kHz @ 0 Adc µH ±10% Part Number HM55-12R40 HM55-14R40 HM55-21R43 HM55-21R95 HM55-211R3 HM55-22R79 HM55-24R28 HM55-26R50 HM55-311R4 HM55-313R0 HM55-315R6 HM55-321R0 Notes: 0.40 0.40 0.43 0.95 1.38 0.79 0.28 0.50 1.40 3.00 5.60 1.0 Inductance 100 kHz, 0.1 V @ Irated µH Min. µH Typ. 0.32 0.32 0.36 0.76 1.10 0.56 0.21 0.36 1.08 2.43 4.86 0.72 0.35 0.35 0.40 0.84 1.25 0.63 0.25 0.40 1.20 2.70 5.40 0.80 Irated (1) (Adc) Isat (2) (Adc) DCR (3) mΩ ±5% Dim D. (mm ±0.5) Dim. E (mm ±0.1) Fig. 20 15 18 22.5 15 27 30 40 35 21 9 40 29 38 27 33 22 39 85 50 50 30 14 56 1.00 1.75 0.77 1.28 2.26 1.20 0.72 0.90 0.98 2.60 7.30 1.25 8.76 8.40 4.10 6.90 6.60 12.5 12.7 12.7 6.60 9.45 7.11 15.24 1.30 1.00 1.30 1.30 1.05 1.45 1.30 1.50 1.65 1.30 0.91 1.50 2 2 1 1 1 2 2 2 1 1 1 2 (1) Rate current, Irated, is the approximate DC current at which inductance will be decreased by 20% from its initial (zero DC) value or the current at which ∆T = 50°C, whichever is lower. (2) Isat is the saturation current at which inductance rolls off approximately 30% from its initial value. (3) DC resistance is measured at 25°C. Outline Dimensions (Inch/mm) Figure 1 Figure 2 BI XXRXX YYWW BI XXRXX YYWW Refer to Note (B) Notes: (A) Refer to Specifications table for ‘D’ & ‘E’ dimensions of each model. (B) For case size 12 & 14, only BI logo & datecode will be printed. Case Size Fig. 12 2 14 2 21 1 22 2 24 2 26 2 31 1 32 2 A .295 7.50 .295 7.50 .413 10.5 .413 10.5 .413 10.5 .413 10.5 .532 13.5 .532 13.5 B .295 7.50 .295 7.50 .433 11.0 .413 10.5 .413 10.5 .413 10.5 .543 13.8 .532 13.5 C .433 11.0 .295 7.50 .413 10.5 .413 10.5 .295 7.50 .355 9.00 .532 13.5 .492 12.5 Packaging Standard: Vacuum Tray Case Size Capacity Per Tray (Units) Capacity Per Carton (Units) 12, 14, 21 22 24 26 31, 32 40 44 50 45 44 560 660 600 630 572 2006 EDITION MAGNETIC COMPONENTS SELECTOR GUIDE www.bitechnologies.com We reserve the right to change specifications without prior notice 19 Electrical Characteristics @ 25°C (A) Case size 12, 14, 21, 22 & 24 20 MAGNETIC COMPONENTS SELECTOR GUIDE 2006 EDITION We reserve the right to change specifications without prior notice. www.bitechnologies.com Electrical Characteristics @ 25°C (Cont’d) (B) Case size 26, 31 & 32 Ordering Information Model Series Case Size: 12 = Figure 2 14 = Figure 2 21 = Figure 1 22 = Figure 2 HM55 21 24 = Figure 2 26 = Figure 2 31 = Figure 1 32 = Figure 2 1R3 LF Lead-Free Option: LF= Lead-Free (No code used for non lead-free part) Inductance Code: First 2 digits are significant. Last digit denotes the number of trailing zeros. For values below 10µH, ”R” denotes the decimal point. 2006 EDITION MAGNETIC COMPONENTS SELECTOR GUIDE www.bitechnologies.com We reserve the right to change specifications without prior notice 21