HM62256A Series Maintenance only 32,768-word × 8-bit High Speed CMOS Static RAM The Hitachi HM62256A is a CMOS static RAM organized 32-kword × 8-bit. It realizes higher performance and low power consumption by employing 0.8 µm Hi-CMOS process technology. The device, packaged in a 8 × 14 mm TSOP with thickness of 1.2 mm, 450-mil SOP (foot print pitch width), 600-mil plastic DIP, or 300-mil plastic DIP, is available for high density mounting. TSOP package is suitable for cards, and reverse type TSOP is also provided. It offers low power standby power dissipation; therefore, it is suitable for battery back up system. Features • High speed: Fast Access time 85/100/120/150 ns (max) • Low Power Standby: 5 µW (typ) (L/L-SL version) Operation: 40 mW (typ) (f = 1 MHz) • Single 5 V supply • Completely static memory No clock or timing strobe required • Equal access and cycle times • Common data input and output: Three state output • Directly TTL compatible: All inputs and outputs • Capability of battery back up operation Ordering Information Type No. Access time Package ——————————————————————– HM62256AP-8 85 ns 600-mil HM62256AP-10 100 ns 28-pin HM62256AP-12 120 ns plastic DIP HM62256AP-15 150 ns (DP-28) ————————————————– HM62256ALP-8 85 ns HM62256ALP-10 100 ns HM62256ALP-12 120 ns HM62256ALP-15 150 ns ————————————————– HM62256ALP-8SL 85 ns HM62256ALP-10SL 100 ns HM62256ALP-12SL 120 ns HM62256ALP-15SL 150 ns ——————————————————————– HM62256ASP-8 85 ns 300-mil HM62256ASP-10 100 ns 28-pin HM62256ASP-12 120 ns plastic DIP HM62256ASP-15 150 ns (DP-28NA) ————————————————– HM62256ALSP-8 85 ns HM62256ALSP-10 100 ns HM62256ALSP-12 120 ns HM62256ALSP-15 150 ns ————————————————– HM62256ALSP-8SL 85 ns HM62256ALSP-10SL 100 ns HM62256ALSP-12SL 120 ns HM62256ALSP-15SL 150 ns ——————————————————————– HM62256AFP-8T 85 ns 450-mil HM62256AFP-10T 100 ns 28-pin HM62256AFP-12T 120 ns plastic SOP HM62256AFP-15T 150 ns (FP-28DA) ————————————————– HM62256ALFP-8T 85 ns HM62256ALFP-10T 100 ns HM62256ALFP-12T 120 ns HM62256ALFP-15T 150 ns ————————————————– HM62256ALFP-8SLT 85 ns HM62256ALFP-10SLT 100 ns HM62256ALFP-12SLT 120 ns HM62256ALFP-15SLT 150 ns ——————————————————————– Note: This device is not available for new application. 1 HM62256A Series HM62256A Series TSOP Series Type No. Access time Package ——————————————————————– HM62256ALT-8 85 ns 8 mm × 14 mm HM62256ALT-10 100 ns 32-pin TSOP HM62256ALT-12 120 ns (normal type) HM62256ALT-15 150 ns (TFP-32DA) ———————————————– HM62256ALT-8SL 85 ns HM62256ALT-10SL 100 ns HM62256ALT-12SL 120 ns HM62256ALT-15SL 150 ns ——————————————————————– Type No. Access time Package ——————————————————————– HM62256ALR-8 85 ns 8 mm × 14 mm HM62256ALR-10 100 ns 32-pin TSOP HM62256ALR-12 120 ns (reverse type) HM62256ALR-15 150 ns (TFP-32DAR) ———————————————– HM62256ALR-8SL 85 ns HM62256ALR-10SL 100 ns HM62256ALR-12SL 120 ns HM62256ALR-15SL 150 ns ——————————————————————– Pin Arrangement HM62256AP/AFP/ASP Series A14 1 28 VCC A12 2 27 WE A7 3 26 A13 A6 4 25 A8 A5 5 24 A9 A4 6 23 A11 A3 7 22 OE A2 8 21 A10 A1 9 20 CS A0 10 19 I/O7 I/O0 11 18 I/O6 I/O1 12 17 I/O5 I/O2 13 16 I/O4 VSS 14 15 I/O3 (Top view) HM62256AR Series HM62256AT Series OE A11 NC A9 A8 A13 WE VCC A14 A12 A7 A6 A5 NC A4 A3 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 (Top view) 2 A10 CS NC I/O7 I/O6 I/O5 I/O4 I/O3 VSS I/O2 I/O1 I/O0 A0 NC A1 A2 A3 A4 NC A5 A6 A7 A12 A14 VCC WE A13 A8 A9 NC A11 OE 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 (Top view) A2 A1 NC A0 I/O0 I/O1 I/O2 VSS I/O3 I/O4 I/O5 I/O6 I/O7 NC CS A10 HM62256A Series HM62256A Series Pin Description Symbol Function ——————————————————————– A0 – A14 Address ——————————————————————– I/O0 – I/O7 Input/output ——————————————————————– CS Chip select ——————————————————————– WE Write enable ——————————————————————– Symbol Function ——————————————————————– OE Output enable ——————————————————————– NC No connection ——————————————————————– VCC Power supply ——————————————————————– VSS Ground ——————————————————————– Block Diagram A5 V CC A4 V SS A3 A11 A9 • • • • • • A8 • A12 • Row Decoder Memory Matrix 512 × 512 • • A7 A6 I/O0 • • • • • Column I/O • • • • • • • • Input Data Control Column Decoder • • I/O7 • • A0 A1 A2 A10 A13 A14 • • • • CS WE Timing Pulse Generator Read/Write Control OE 3 HM62256A Series HM62256A Series Function Table WE CS OE Mode VCC current I/O pin Ref. cycle ———————————————————————————————————————————————– X H X Not selected ISB, ISB1 High-Z — ———————————————————————————————————————————————– H L H Output disable ICC High-Z — ———————————————————————————————————————————————– H L L Read ICC Dout Read cycle (1)–(3) ———————————————————————————————————————————————– L L H Write ICC Din Write cycle (1) ———————————————————————————————————————————————– L L L Write ICC Din Write cycle (2) ———————————————————————————————————————————————– Note: X: H or L Absolute Maximum Ratings Parameter Symbol Value Unit ———————————————————————————————————————————————– Voltage on any pin relative to VSS VT –0.5*1 to +7.0 V ———————————————————————————————————————————————– Power dissipation PT 1.0 W ———————————————————————————————————————————————– Operating temperature Topr 0 to +70 °C ———————————————————————————————————————————————– Storage temperature Tstg –55 to +125 °C ———————————————————————————————————————————————– Storage temperature under bias Tbias –10 to +85 °C ———————————————————————————————————————————————– Note: 1. VT min = –3.0 V for pulse half-width ≤ 50 ns Recommended DC Operating Conditions (Ta = 0 to +70°C) Parameter Symbol Min Typ Max Unit ———————————————————————————————————————————————– Supply voltage VCC 4.5 5.0 5.5 V ———————————————————————————————– VSS 0 0 0 V ———————————————————————————————————————————————– Input high (logic 1) voltage VIH 2.2 — 6.0 V ———————————————————————————————————————————————– Input low (logic 0) voltage VIL –0.5*1 — 0.8 V ———————————————————————————————————————————————– Note: 1. VIL min = –3.0 V for pulse half-width ≤ 50 ns 4 HM62256A Series HM62256A Series DC Characteristics (Ta = 0 to +70°C, VCC = 5 V ± 10%, VSS = 0 V) Parameter Symbol Min Typ*1 Max Unit Test conditions ———————————————————————————————————————————————– Input leakage current |ILI| — — 1 µA Vin = VSS to VCC ———————————————————————————————————————————————– Output leakage current |ILO| — — 1 µA CS = VIH or OE = VIH or WE = VIL, VI/O = VSS to VCC ———————————————————————————————————————————————– Operating VCC current ICC — 6 15 mA CS = VIL, others = VIH/VIL Iout = 0 mA —————————————————————————————————————————— HM62256A-8 ICC1 — 33 50 mA min cycle, duty = 100%, II/O = 0 mA HM62256A-10 — 30 50 CS = VIL, others = VIH/VIL HM62256A-12 — 27 45 HM62256A-15 — 24 40 —————————————————————————————————————————— ICC2 — 5 15 mA Cycle time = 1µs, II/O = 0 mA CS = VIL, VIH = VCC, VIL = 0 ———————————————————————————————————————————————– Standby VCC current ISB — 0.3 2 mA CS = VIH ——————————————————————————————————— ISB1 — 0.01 1 mA Vin ≥ 0 V —————————————— CS ≥ VCC – 0.2 V — 0.3*2 100*2 µA —————————————— — 0.3*3 50*3 µA ———————————————————————————————————————————————– Output low voltage VOL — — 0.4 V IOL = 2.1 mA ———————————————————————————————————————————————– Output high voltage VOH 2.4 — — V IOH = –1.0 mA ———————————————————————————————————————————————– Notes: 1. Typical values are at VCC = 5.0 V, Ta = +25°C and not guaranteed. 2. This characteristics is guaranteed only for L-version. 3. This characteristics is guaranteed only for L-SL version. Capacitance (Ta = 25°C, f = 1 MHz)*1 Parameter Symbol Min Typ Max Unit Test conditions ———————————————————————————————————————————————– Input capacitance Cin — — 6 pF Vin = 0 V ———————————————————————————————————————————————– Input/output capacitance CI/O — — 8 pF VI/O= 0 V ———————————————————————————————————————————————– Note: 1. This parameter is sampled and not 100% tested. 5 HM62256A Series HM62256A Series AC Characteristics (Ta = 0 to +70°C, VCC = 5 V ± 10%, unless otherwise noted.) Test Conditions • Input pulse levels: 0.8 V to 2.4 V • Input and output timing refernce levels: 1.5 V • Input rise and fall times: 5 ns • Output load: 1 TTL Gate + CL (100 pF) (Including scope & jig) Read Cycle HM62256A-8 HM62256A-10 HM62256A-12 HM62256A-15 —————– —————– —————– —————– Parameter Symbol Min Max Min Max Min Max Min Max Unit Note ———————————————————————————————————————————————– Read cycle time tRC 85 — 100 — 120 — 150 — ns ———————————————————————————————————————————————– Address access time tAA — 85 — 100 — 120 — 150 ns ———————————————————————————————————————————————– Chip select tACS — 85 — 100 — 120 — 150 ns access time ———————————————————————————————————————————————– Output enable to tOE — 45 — 50 — 60 — 70 ns output valid ———————————————————————————————————————————————– Chip selection to tCLZ 10 — 10 — 10 — 10 — ns 2 output in low-Z ———————————————————————————————————————————————– Output enable to tOLZ 5 — 5 — 5 — 5 — ns 2 output in low-Z ———————————————————————————————————————————————– Chip deselection to tCHZ 0 30 0 35 0 40 0 50 ns 1, 2 output in high-Z ———————————————————————————————————————————————– Output disable to tOHZ 0 30 0 35 0 40 0 50 ns 1, 2 output in high-Z ———————————————————————————————————————————————– Output hold from tOH 5 — 10 — 10 — 10 — ns address change ———————————————————————————————————————————————– 6 HM62256A Series HM62256A Series Read Timing Waveform (1) *3 t RC Address t AA t ACS CS t CLZ *2 t OH t OE t OLZ *2 OE t OHZ*1 *2 t CHZ *1 *2 Dout Valid Data Read Timing Waveform (2) *3 *4 *6 t RC Address t OH Dout t OH t AA Valid Data 7 HM62256A Series HM62256A Series Read Timing Waveform (3) *3 *5 *6 CS t ACS t CHZ t CLZ *2 Dout *1,*2 Valid Data Notes: 1. tCHZ and tOHZ are defined as the time at which the outputs achieve the open circuit conditions and are not referenced to output voltage levels. 2. This parameter is sampled and not 100% tested. 3. WE is high for read cycle. 4. Device is continuously selected, CS = VIL. 5. Address Valid prior to or coincident with CS transition Low. 6. OE = VIL. Write Cycle HM62256A-8 HM62256A-10 HM62256A-12 HM62256A-15 —————– —————– —————– —————– Parameter Symbol Min Max Min Max Min Max Min Max Unit Note ———————————————————————————————————————————————– 85 — 100 — 120 — 150 — ns Write cycle time tWC ———————————————————————————————————————————————– 75 — 80 — 85 — 100 — ns 2 Chip selection to tCW end of write ———————————————————————————————————————————————– 0 — 0 — 0 — 0 — ns 3 Address setup time tAS ———————————————————————————————————————————————– 75 — 80 — 85 — 100 — ns Address valid to tAW end of write ———————————————————————————————————————————————– 55 — 60 — 70 — 90 — ns 1 Write pulse width tWP ———————————————————————————————————————————————– 0 — 0 — 0 — 0 — ns 4 Write recovery time tWR ———————————————————————————————————————————————– 0 30 0 35 0 40 0 50 ns 10 WE to output in high-Z tWHZ ———————————————————————————————————————————————– 40 — 40 — 50 — 60 — ns Data to write time tDW overlap ———————————————————————————————————————————————– 0 — 0 — 0 — 0 — ns Data hold from tDH write time ———————————————————————————————————————————————– 5 — 5 — 5 — 5 — ns 10 Output active from tOW end of write ———————————————————————————————————————————————– 0 30 0 35 0 40 0 50 ns 10, 11 Output disable to tOHZ output in high-Z ———————————————————————————————————————————————– 8 HM62256A Series HM62256A Series Write Timing Waveform (1) (OE Clock) t WC Address t WR *4 t AW OE t CW *2 CS *6 t AS *3 t WP *1 WE t OHZ *5 *10 Dout t DW Din t DH Valid Data 9 HM62256A Series HM62256A Series Write Timing Waveform (2) (OE Low Fixed) t WC Address t WR*4 t CW *2 CS *6 t AW t WP *1 WE t OH *3 t AS t OW *10 t WHZ*5 *10 *7 *8 Dout t DW t DH *9 Din Valid Data Notes: 1. A write occurs during the overlap of a low CS and a low WE. A write begins at the later transition of CS going low or WE going low. A write ends at the earlier transition of CS going high or WE going high. tWP is measured from the beginning of write to the end of write. 2. tCW is measured from CS going low to the end of write. 3. tAS is measured from the address valid to the beginning of write. 4. tWR is measured from the earlier of WE or CS going high to the end of write cycle. 5. During this period, I/O pins are in the output state so that the input signals of the opposite phase to the outputs must not be applied. 6. If the CS low transition occurs simultaneously with the WE low transition or after the WE transition, the output remain in a high impedance state. 7. Dout is the same phase of the write data of this write cycle. 8. Dout is the read data of next address. 9. If CS is low during this period, I/O pins are in the output state. Therefore, the input signals of the opposite phase to the output must not be applied to them. 10. This parameter is sampled and not 100% tested. 11. tOHZ and tWHZ are defined as the time at which the outputs achieve the open circuit conditions and are not referenced to output voltage levels. 10 HM62256A Series HM62256A Series Low VCC Data Retention Characteristics (Ta = 0 to +70°C) This characteristics is guaranteed only for L/L-SL version. Parameter Symbol Min Typ*1 Max Unit Test conditions ———————————————————————————————————————————————– VCC for data retention VDR 2 — — V CS ≥ VCC – 0.2 V, Vin ≥ 0 V ———————————————————————————————————————————————– Data retention current ICCDR — 0.2 30*2 µA VCC = 3.0 V, Vin ≥ 0 V ——————————————– — 0.2 10*3 µA CS ≥ VCC – 0.2 V ———————————————————————————————————————————————– Chip deselect to data retention time tCDR 0 — — ns See retention waveform ——————————————————————————————————–– Operation recovery time tR tRC*4 — — ns ———————————————————————————————————————————————– Low VCC Data Retention Timing Waveform Data retention mode V CC 4.5 V tR t CDR 2.2 V V DR CS 0V Notes: 1 2. 3. 4. 5. CS ≥ VCC – 0.2 V Typical values are at VCC = 3.0 V, Ta = +25°C and not guaranteed. 20 µA max at Ta = 0 to +40°C. (only for L-version) 3 µA max at Ta = 0 to +40°C. (only for L-SL version) tRC = read cycle time. CS controls address buffer, WE buffer, OE buffer, and Din buffer. If CS controls data retention mode, Vin levels (address, WE, OE, I/O) can be in the high impedance state. 11