Technical Datasheet DS55 LeadFree SuperFlux LEDs Introduction This revolutionary package design allows the lighting designer to reduce the number of LEDs required and provide a more uniform and unique illuminated appearance than with other LED solutions. This is possible through the efficient optical package design and highcurrent capabilities. The low profile package can be easily coupled with reflectors or lenses to efficiently distribute light and provide the desired lit Key Benefits Rugged Lighting Products Electricity Savings Maintenance Savings appearance. This product family employs red, redorange and amber LED materials, which allow designers to match the color of many lighting applications like vehicle signal lamps, specialty lighting, and electronic signs. HPWAMH02 HPWTMH02 HPWADH02 HPWTDH02 HPWTRD02 HPWTBH02 HPWTMD02 HPWTRL02 HPWTDD02 HPWTML02 HPWTBD02 HPWTDL02 HPWTRH02 HPWTBL02 Features LeadFree RoHS Compliant High Luminance Uniform Color Low Power Consumption Low Thermal Resistance Low Profile Meets SAE/ECE/JIS Automotive Color Requirements Packaged in tubes for use with automatic insertion equipment Typical Applications Automotive Exterior Lighting Electronic Signs and Signals Specialty Lighting Outline Drawings Selection Guide Table 1 Total Included @ 70 mA[1] Angle θ90V (Degrees) [2] Typ. Total Flux ΦV (LM) Device Type LED Color Typ. HPWAMH02 AS AlInGaP RedOrange 2.0 95 HPWADH02 75 HPWTRD02 44 X 88 HPWTMD02 TS AlInGaP Red 3.8 100 HPWTDD02 70 HPWTBD02 50 HPWTRH02 44 X 88 HPWTMH02 TS AlInGaP RedOrange 5.0 100 HPWTDH02 70 HPWTBH02 50 HPWTRL02 44 X 88 HPWTML02 TS AlInGaP Amber 2.5 100 HPWTDL02 70 HPWTBL02 50 Notes: 1.Φv is the total luminous flux output as measured with an integrating sphere after the device has stabilized. (RθJA = 200°C/W, TA = 25ºC) 2.θ0.90 V is the included angle at which 90% of the total luminous flux is captured. Absolute Maximum Ratings at TA = 25ºC Table 2 Parameter HPWA HPWT Units 70 70 mA Power Dissipation 187 221 mW Reverse Voltage (IR = 100 mA) 10 10 V DC Forward Current [1] Operating Temperature Range 40 to +100 ºC Storage Temperature Range 55 to +100 ºC High Temperature Chamber LED Junction Temperature Solder Conditions 125ºC, 2 Hours 125ºC [2] Preheat Temperature Solder Temperature 85 +/ 15°C, 70 sec +/ 20 sec 250 +/ 5°C, 2.5 +/ 0.5 sec [1.5mm (0.06 in) below seating plane] Notes: 1. Derate as shown in Figures 4a and 4b. 2. See "Recommended Soldering Conditions", Page 8. LeadFree SuperFlux LEDs Datasheet DS55 (10/06) 2 Optical Characteristics at TA = 25°C, IF = 70 mA, RθJA = 200°C/W Electrical Characteristics at TA=25°C Table 4 Forward Voltage Reverse VF (Volts) Breakdown Capacitance Thermal @ VR (Volts)[1] C (pF) Resistance Speed of IF = 70mA (HPWA, @ IR = 100 VF = 0, RθJPIN Response HPWT) μA F = 1MHz. (°C/W) τs (ns) [2] Table 3 Total Device Type HPWAMH02 Luminous Peak Dominant Included Intensity/ Viewing Wavelength Wavelength Angle θ0.90 V Total Flux Angle 2 θ1/2 λpeak (nm) λdom(nm)[1] (Degrees)[2] Iv(cd)/ Φv(lm) (Degrees) Typ. Typ. Typ. Typ. Typ. 624 618 95 0.6 Device 90 Type Min Typ Max Min Typ. Typ. Typ. Typ. HPWAxH02 1.83 2.2 2.67 10 20 40 155 20 HPWADH02 75 0.9 60 HPWTxD02 2.19 2.6 3.03 10 20 40 125 20 HPWTRD02 44 X 88 1.25 25 x 68 HPWTxH02 2.19 2.6 3.03 10 20 40 125 20 100 0.6 70 HPWTxL02 2.19 2.6 3.15 10 20 40 125 20 70 1.5 40 HPWTMD02 640 630 HPWTDD02 HPWTBD02 50 2.0 30 HPWTRH02 44 X 88 1.25 25 x 68 100 0.6 70 HPWTMH02 626 620 HPWTDH02 70 1.5 40 HPWTBH02 50 2.0 30 44 X 88 1.25 25 x 68 100 0.6 70 HPWTDL02 70 1.5 40 HPWTBL02 50 2.0 30 HPWTRL02 HPWTML02 596 594 Notes: 1.Operation in reverse bias is not recommended. 2.τs is the time constant, et/τs. Notes: 1.The dominant wavelength is derived from the CIE Chromaticity Diagram and represents the perceived color of the device. 2.θ0.90 V is the included angle at which 90% of the total lumi nous flux is captured. LeadFree SuperFlux LEDs Datasheet DS55 (10/06) 3 Part Number Selection Red Part Number HPWTRD0200000 HPWTRD02D4000 HPWTRD02E4000 HPWTRD02F4000 HPWTBD0200000 HPWTBD02D4000 HPWTBD02E4000 HPWTBD02F4000 HPWTDD0200000 HPWTDD02D4000 HPWTDD02E4000 HPWTDD02F4000 HPWTMD0200000 HPWTMD02D4000 HPWTMD02E4000 HPWTMD02F4000 Viewing Angle 2θ1/2 (Degrees) 25 25 25 25 X 68 X 68 X 68 X 68 30 30 30 30 40 40 40 40 70 70 70 70 Min. Flux[1] Φv (lm) 1.5 2.0 2.5 3.0 1.5 2.0 2.5 3.0 1.5 2.0 2.5 3.0 1.5 2.0 2.5 3.0 Max Flux Φv (lm) 4.8 6.1 7.3 4.8 6.1 7.3 4.8 6.1 7.3 4.8 6.1 7.3 Minimum Intensity (cd) 1.9 2.5 3.1 3.8 3.0 4.0 5.0 6.0 2.3 3.0 3.8 4.5 0.9 1.2 1.5 1.8 Note: 1. Φv is the total luminous flux output as measured with an integrating sphere after the device has stabilized. LeadFree SuperFlux LEDs Datasheet DS55 (10/06) 4 Maximum Intensity (cd) 6.0 7.6 9.1 9.6 12.2 14.6 7.2 9.2 11.0 2.9 3.7 4.4 RedOrange Part Number HPWTRH0200000 HPWTRH02D4000 HPWTRH02E4000 HPWTRH02F4000 HPWTRH02G4000 HPWTRH02H4000 HPWTBH0200000 HPWTBH02D4000 HPWTBH02E4000 HPWTBH02F4000 HPWTBH02G4000 HPWTBH02H4000 HPWTDH0200000 HPWTDH02D4000 HPWTDH02E4000 HPWTDH02F4000 HPWTDH02G4000 HPWTDH02H4000 HPWTMH0200000 HPWTMH02D4000 HPWTMH02E4000 HPWTMH02F4000 HPWTMH02G4000 HPWTMH02H4000 HPWAMH02B4000 HPWADH02B4000 HPWAMH02C4000 HPWADH02C4000 Viewing Angle 2θ1/2 (Degrees) 25 25 25 25 25 25 X 68 X 68 X 68 X 68 X 68 X 68 30 30 30 30 30 30 40 40 40 40 40 40 70 70 70 70 70 70 90 40 90 40 Min. Flux Φv (lm) Max Flux Φv (lm) 1.5 2.0 2.5 3.0 3.5 4.0 1.5 2.0 2.5 3.0 3.5 4.0 1.5 2.0 2.5 3.0 3.5 4.0 1.5 2.0 2.5 3.0 3.5 4.0 1.0 1.0 1.5 1.5 Minimum Intensity (cd) 4.8 6.1 7.3 9.7 12.0 3.6 3.6 4.2 4.2 1.9 2.5 3.1 3.8 4.4 5.0 3.0 4.0 5.0 6.0 7.0 8.0 2.3 3.0 3.8 4.5 5.3 6.0 0.9 1.2 1.5 1.8 2.1 2.4 0.6 1.5 0.9 2.3 Max Flux Φv (lm) Minimum Intensity (cd) 4.8 6.1 7.3 9.7 12.0 4.8 6.1 7.3 9.7 12.0 4.8 6.1 7.3 9.7 12.0 Maximum Intensity (cd) 6.0 7.6 9.1 12.1 15.0 9.6 12.2 14.6 19.4 24.0 7.2 9.2 11.0 14.6 18.0 2.9 3.7 4.4 5.8 7.2 2.2 5.4 2.5 6.3 Amber Part Number HPWTRL0200000 HPWTRL02C4000 HPWTRL02D4000 HPWTBL0200000 HPWTBL02C4000 HPWTBL02D4000 HPWTDL0200000 HPWTDL02C4000 HPWTDL02D4000 HPWTML0200000 HPWTML02C4000 HPWTML02D4000 Viewing Angle 2θ1/2 (Degrees) Min. Flux Φv (lm) 25 X 68 25 X 68 25 X 68 30 30 30 40 40 40 70 70 70 1.0 1.5 2.0 1.0 1.5 2.0 1.0 1.5 2.0 1.0 1.5 2.0 LeadFree SuperFlux LEDs Datasheet DS55 (10/06) 4.2 4.8 4.2 4.8 4.2 4.8 4.2 4.8 5 1.3 1.9 2.5 2.0 3.0 4.0 1.5 2.3 3.0 0.6 0.9 1.2 Maximum Intensity (cd) 5.3 6.0 8.4 9.6 6.3 7.2 2.5 2.9 Figures1 HPWA-XL02 HPWA-XH02 HPWT-XL02 HPWT-XH02 HPWT-XD02 Figure 3. HPWA/HPWTxx02 Relative Luminous Flux Figure 1a. Relative Intensity vs. Wavelength vs. Forward Current. MAXIMUM DC CURRENT (mA) 70 FORWARD CURRENT (mA) 70 60 HPWT 50 HPWA 40 30 60 50 Rth(j-a) = 300 C/W Rth(j-a) = 400 C/W 40 Rth(j-a) = 500 C/W Rth(j-a) = 600 C/W 30 20 10 0 20 0 20 40 60 80 100 AMBIENT TEMPERATURE (C) 10 Figure 4a. HPWAxx02 Maximum DC Forward Current 0 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 vs. Ambient Temperature. 3.2 FORWARD VOLTAGE (V) 70 MAXIMUM DC CURRENT (mA) Figure 2a. Forward Current vs. Forward Voltage 60 50 40 Rth(j-a) = 300 C/W Rth(j-a) = 400 C/W 30 Rth(j-a) = 500 C/W 20 Rth(j-a) = 600 C/W 10 0 0 20 40 60 80 100 AMBIENT TEMPERATURE (C) Figure 4b. HPWTxx02 Maximum DC Forward Current vs. Ambient Temperature. Note: 1.24mm2 of Cu pad per emitter at cathode lead is recom mended for lowest thermal resistance. 1. All Figures Typical unless indicated as Maximum. LeadFree SuperFlux LEDs Datasheet DS55 (10/06) 6 Figure 5a. HPWTRx02 Relative Luminous Intensity vs. Figure 5d. HPWA(T)Dx02 Relative Luminous Intensity Off Axis Angle. vs. Off Axis Angle. Figure 5b. HPWAMx02 Relative Luminous Intensity Figure 5e. HPWTBx02 Relative Luminous Intensity vs. Off Axis Angle. vs. Off Axis Angle. Figure 5c. HPWTMx02 Relative Luminous Intensity vs. Off Axis Angle. 1. All Figures Typical unless indicated as Maximum. LeadFree SuperFlux LEDs Datasheet DS55 (10/06) 7 Recommended Soldering Conditions for PbFree SuperFlux 300 Peak o 255 C Temperature (deg C) 250 o 217 C 200 Preheat 90 s (MAX) 100 oC (MAX) 150 100 50 0 0 10 20 30 40 50 Time (Seconds) 60 70 80 90 Solder Conditions Preheat Temperatue 85 +/ 15ºC Preheat Time 70s +/ 20s Peak Profile Temperature 250 +/ 5ºC Solder Time Above 217ºC 2.5 +/ 0.5s Note: 1.All top preheat stages are to be turned off so that the lamp body is not directly exposed to the heat source. 2.Profile taken on the LED lead at the bottom of the PCB. 3.Single wave soldering is recommended. LeadFree SuperFlux LEDs Datasheet DS55 (10/06) 8 Company Information LUXEON®, SuperFlux and SnapLED are developed, manufactured and marketed by Philips Lumileds Lighting Company. Philips Lumileds is a worldclass supplier of Light Emitting Diodes (LEDs) producing billions of LEDs annually. Philips Lumileds is a fully integrated supplier, producing core LED material in all three base colors (Red, Green, Blue) and White. Philips Lumileds has R&D centers in San Jose, Philips Lumileds may make process or materials changes affecting the perform ance or other characteristics of our products. These products supplied after such changes will continue to meet published specifications, but may not be identical to products supplied as samples or under prior orders. California and in The Netherlands and production capabilities in San Jose and Penang, Malaysia. Founded in 1999, Philips Lumileds is the highflux LED technology leader and is dedicated to bridging the gap between solidstate LED technology and the lighting world. Philips Lumileds technology, LEDs and systems are enabling new applica tions and markets in the lighting world. www.luxeon.com www.lumiledsfuture.com For technical assistance or the location of your nearest sales office contact any of the following: North America: +1 888 589 3662 or [email protected] Europe: 00 800 443 88 873 or [email protected] ©2006 Philips Lumileds Lighting Company. All rights reserved. Product specifications are subject to change without notice. Luxeon is a registered trademark of the Philips Lumileds Lighting Company in the United States and other countries. Asia: 800 5864 5337 or [email protected]