IDT ICS9LPRS462

DATASHEET
ICS9LPRS462
Low Power Clock for ATI RS/RD600 series chipsets for
AMD CPUs
Description
Features/Benefits:
ATI RD/RS600 series systems using AMD CPUs
•
Output Features
•
•
•
•
•
•
•
•
Integrated Series Resistors on differential outputs
Greyhound Compatible CPU outputs
2 - 0.7V Low Power differential CPU pairs
8 - 0.7V Low Power differential SRC pairs
4 - 0.7V Low Power differential ATIG pairs
1 - 66 MHz HyperTransport clock
2 - 48MHz USB clocks
3 - 14.318MHz Reference clocks
GNDREF
VDDREF
X1
X2
VDD48
48MHz_0
48MHz_1
GND48
SMBCLK
SMBDAT
RESET_IN#
SRC7T_LPR
SRC7C_LPR
VDDSRC
GNDSRC
SRC6T_LPR
SRC6C_LPR
SRC5T_LPR
SRC5C_LPR
SRC4T_LPR
SRC4C_LPR
GNDSRC
VDDSRC
SRC3T_LPR
SRC3C_LPR
SRC2T_LPR
SRC2C_LPR
VDDSRC
GNDSRC
ATIG3T_LPR
ATIG3C_LPR
*CLKREQB#
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
•
•
•
•
Key Specifications
•
•
•
•
CPU outputs cycle-to-cycle jitter <150ps
SRC outputs cycle-to-cycle jitter < 125ps
ATIG outputs cycle-to-cycle jitter < 125ps
+/- 100ppm frequency accuracy on all outputs if REF is
tuned to +/-100ppm
Funtionality
9LPRS462
Pin Configuration
3 - Programmable Clock Request pins for SRC and ATIG
clocks
ATIGCLKs are programmable for frequency
Spread Spectrum for EMI reduction
Outputs may be disabled via SMBus
External crystal load capacitors for maximum frequency
accuracy
64
63
62
61
60
59
58
57
56
55
54
53
52
51
50
49
48
47
46
45
44
43
42
41
40
39
38
37
36
35
34
33
FS0/REF0
FS1/REF1
FS2/REF2
**PD
VDDHTT
HTTCLK0
GNDHTT
*CLKREQA#
CPUKG0T_LPR
CPUKG0C_LPR
VDDCPU
GNDCPU
CPUKG1T_LPR
CPUKG1C_LPR
VDDA
GNDA
NC
SRC0T_LPR
SRC0C_LPR
GNDSRC
VDDSRC
SRC1T_LPR
SRC1C_LPR
ATIG0T_LPR
ATIG0C_LPR
VDDATIG
GNDATIG
ATIG1T_LPR
ATIG1C_LPR
ATIG2T_LPR
ATIG2C_LPR
*CLKREQC#
HTT
MHz
Hi-Z
SRC
MHz
100.00
ATIG
MHz
100.00
USB
MHz
48.00
X/2
X/3
100.00
100.00
48.00
230.00
76.67
100.00
100.00
48.00
240.00
80.00
100.00
100.00
48.00
0
100.00
66.66
100.00
100.00
48.00
0
1
133.33
66.66
100.00
100.00
48.00
1
1
0
166.67
66.66
100.00
100.00
48.00
1
1
1
200.00
66.66
100.00
100.00
48.00
FS2
FS1
FS0
0
0
0
0
0
1
0
1
0
0
1
1
1
0
1
CPU
MHz
Hi-Z
Power Groups
Pin Number
VDD
5
GND
8
14,23,26,36 15,22,27,37
Description
USB_48 outputs
SRCCLK outputs
33
32
ATIGCLK differential outputs
42
41
Analog, PLL
46
45
CPUCLK8 differential outputs
52
50
HTTCLK output
2
1
REF outputs
64-TSSOP
* Internal Pull-Up Resistor
** Internal Pull-Down Resistor
IDTTM/ICSTM Low Power Clock for ATI RS/RD600 series chipsets for AMD CPUs
1378A—04/07/08
1
ICS9LPRS462
Low Power Clock for ATI RS/RD600 series chipsets for AMD CPUs
Pin Description
PIN #
PIN NAME
TYPE
DESCRIPTION
GND
PWR
IN
OUT
PWR
OUT
OUT
GND
IN
I/O
Ground pin for the REF outputs.
Ref, XTAL power supply, nominal 3.3V
Crystal input, nominally 14.318MHz
Crystal output, nominally 14.318MHz
Power pin for the 48MHz outputs and core. 3.3V
48MHz clock output.
48MHz clock output.
Ground pin for the 48MHz outputs
Clock pin of SMBus circuitry, 5V tolerant.
Data pin for SMBus circuitry, 5V tolerant.
Real Time falling edge triggered input, When asserted, the part initiates a power up
reset with the SMBus being reset to it's power up values, and all PLL derived clocks
stopped for the duration of Power up Stabilization. REF outputs continue to run.
True clock of low power differential SRC clock pair with integrated 33 ohm series
resistor. (no 50ohm shunt resistor to GND needed)
Complement clock of low power differential SRC clock pair with integrated 33 ohm
series resistor. (no 50ohm shunt resistor to GND needed)
Supply for SRC, 3.3V nominal
Ground pin for the SRC outputs
True clock of low power differential SRC clock pair with integrated 33 ohm series
resistor. (no 50ohm shunt resistor to GND needed)
Complement clock of low power differential SRC clock pair with integrated 33 ohm
series resistor. (no 50ohm shunt resistor to GND needed)
True clock of low power differential SRC clock pair with integrated 33 ohm series
resistor. (no 50ohm shunt resistor to GND needed)
Complement clock of low power differential SRC clock pair with integrated 33 ohm
series resistor. (no 50ohm shunt resistor to GND needed)
True clock of low power differential SRC clock pair with integrated 33 ohm series
resistor. (no 50ohm shunt resistor to GND needed)
Complement clock of low power differential SRC clock pair with integrated 33 ohm
series resistor. (no 50ohm shunt resistor to GND needed)
Ground pin for the SRC outputs
Supply for SRC, 3.3V nominal
True clock of low power differential SRC clock pair with integrated 33 ohm series
resistor. (no 50ohm shunt resistor to GND needed)
Complement clock of low power differential SRC clock pair with integrated 33 ohm
series resistor. (no 50ohm shunt resistor to GND needed)
True clock of low power differential SRC clock pair with integrated 33 ohm series
resistor. (no 50ohm shunt resistor to GND needed)
Complement clock of low power differential SRC clock pair with integrated 33 ohm
series resistor. (no 50ohm shunt resistor to GND needed)
Supply for SRC, 3.3V nominal
Ground pin for the SRC outputs
True clock of low-power differential push-pull PCI-Express pair with integrated 33 ohm
series resistor. (no 50ohm shunt resistor to GND needed)
Complementary clock of low-power differential push-pull PCI-Express pair with
integrated 33 ohm series resistor. (no 50ohm shunt resistor to GND needed)
Programmable Clock Request pin for SRC/ATIG/SB_SRC outputs. If output is selected
for control, then that output is controlled as follows:
0 = Enabled, 1 = Tri-state
1
2
3
4
5
6
7
8
9
10
GNDREF
VDDREF
X1
X2
VDD48
48MHz_0
48MHz_1
GND48
SMBCLK
SMBDAT
11
RESET_IN#
IN
12
SRC7T_LPR
OUT
13
SRC7C_LPR
OUT
14
15
VDDSRC
GNDSRC
PWR
GND
16
SRC6T_LPR
OUT
17
SRC6C_LPR
OUT
18
SRC5T_LPR
OUT
19
SRC5C_LPR
OUT
20
SRC4T_LPR
OUT
21
SRC4C_LPR
OUT
22
23
GNDSRC
VDDSRC
GND
PWR
24
SRC3T_LPR
OUT
25
SRC3C_LPR
OUT
26
SRC2T_LPR
OUT
27
SRC2C_LPR
OUT
28
29
VDDSRC
GNDSRC
PWR
GND
30
ATIG3T_LPR
OUT
31
ATIG3C_LPR
OUT
32
*CLKREQB#
IN
IDTTM/ICSTM Low Power Clock for ATI RS/RD600 series chipsets for AMD CPUs
1378A—04/07/08
2
ICS9LPRS462
Low Power Clock for ATI RS/RD600 series chipsets for AMD CPUs
Pin Description (Continued)
PIN #
PIN NAME
TYPE
33
*CLKREQC#
IN
34
ATIG2C_LPR
OUT
35
ATIG2T_LPR
OUT
36
ATIG1C_LPR
OUT
37
ATIG1T_LPR
OUT
38
39
GNDATIG
VDDATIG
GND
PWR
40
ATIG0C_LPR
OUT
41
ATIG0T_LPR
OUT
42
SRC1C_LPR
OUT
43
SRC1T_LPR
OUT
44
45
VDDSRC
GNDSRC
PWR
GND
46
SRC0C_LPR
OUT
47
SRC0T_LPR
OUT
48
49
50
NC
GNDA
VDDA
NC
GND
PWR
51
CPUKG1C_LPR
OUT
52
CPUKG1T_LPR
OUT
53
54
GNDCPU
VDDCPU
GND
PWR
55
CPUKG0C_LPR
OUT
56
CPUKG0T_LPR
OUT
57
*CLKREQA#
58
59
60
GNDHTT
HTTCLK0
VDDHTT
61
**PD
IN
62
63
64
FS2/REF2
FS1/REF1
FS0/REF0
I/O
I/O
I/O
IN
PWR
OUT
PWR
DESCRIPTION
Programmable Clock Request pin for SRC/ATIG/SB_SRC outputs. If output is selected
for control, then that output is controlled as follows:
0 = Enabled, 1 = Tri-state
Complementary clock of low-power differential push-pull PCI-Express pair with
integrated 33 ohm series resistor. (no 50ohm shunt resistor to GND needed)
True clock of low-power differential push-pull PCI-Express pair with integrated 33 ohm
series resistor. (no 50ohm shunt resistor to GND needed)
Complementary clock of low-power differential push-pull PCI-Express pair with
integrated 33 ohm series resistor. (no 50ohm shunt resistor to GND needed)
True clock of low-power differential push-pull PCI-Express pair with integrated 33 ohm
series resistor. (no 50ohm shunt resistor to GND needed)
Ground pin for the ATIG outputs
Power supply for ATIG core, nominal 3.3V
Complementary clock of low-power differential push-pull PCI-Express pair with
integrated 33 ohm series resistor. (no 50ohm shunt resistor to GND needed)
True clock of low-power differential push-pull PCI-Express pair with integrated 33 ohm
series resistor. (no 50ohm shunt resistor to GND needed)
Complement clock of low power differential SRC clock pair with integrated 33 ohm
series resistor. (no 50ohm shunt resistor to GND needed)
True clock of low power differential SRC clock pair with integrated 33 ohm series
resistor. (no 50ohm shunt resistor to GND needed)
Supply for SRC, 3.3V nominal
Ground pin for the SRC outputs
Complement clock of low power differential SRC clock pair with integrated 33 ohm
series resistor. (no 50ohm shunt resistor to GND needed)
True clock of low power differential SRC clock pair with integrated 33 ohm series
resistor. (no 50ohm shunt resistor to GND needed)
No Connect
Ground for the Analog Core
3.3V Power for the Analog Core
Complementary signal of low-power differential push-pull AMD K8 "Greyhound" clock
with integrated 33 ohm series resistor. (no 50ohm shunt resistor to GND needed)
True signal of low-power differential push-pull AMD K8 "Greyhound" clock with
integrated 33 ohm series resistor. (no 50ohm shunt resistor to GND needed)
Ground pin for the CPU outputs
Supply for CPU, 3.3V nominal
Complementary signal of low-power differential push-pull AMD K8 "Greyhound" clock
with integrated 33 ohm series resistor. (no 50ohm shunt resistor to GND needed)
True signal of low-power differential push-pull AMD K8 "Greyhound" clock with
integrated 33 ohm series resistor. (no 50ohm shunt resistor to GND needed)
Programmable Clock Request pin for SRC/ATIG/SB_SRC outputs. If output is selected
for control, then that output is controlled as follows:
0 = Enabled, 1 = Tri-state
Ground pin for the HTT outputs
3.3V single ended 66MHz hyper transport clock
Supply for HTT clocks, nominal 3.3V.
Enter /Exit Power Down.
1 = Power Down, 0 = normal operation.
Frequency select latch input pin/ 3.3V 14.318MHz reference clock
Frequency select latch input pin/ 3.3V 14.318MHz reference clock
Frequency select latch input pin/ 3.3V 14.318MHz reference clock
IDTTM/ICSTM Low Power Clock for ATI RS/RD600 series chipsets for AMD CPUs
1378A—04/07/08
3
ICS9LPRS462
Low Power Clock for ATI RS/RD600 series chipsets for AMD CPUs
General Description
The ICS9LPRS462 is a main clock synthesizer chip that provides all clocks required for ATI RD/RS600-based systems. An SMBus
interface allows full control of the device.
Funtional Block Diagram
REF(2:0)
X1
XTAL
OSC.
X2
48MHz(1:0)
FIXED PLL
HTT
DIV
HTTCLK0
CPU
DIV
CPUCLK(1:0)
SRC
DIV
SRCCLK(7:0)
ATIG
DIV
ATIGCLK(3:0)
FS(2:0)
PD
CLKREQA#
CLKREQB#
CLKREQC#
CONTROL
LOGIC
PLL
RESET_IN#
SMBDAT
SMBCLK
IREF
IDTTM/ICSTM Low Power Clock for ATI RS/RD600 series chipsets for AMD CPUs
1378A—04/07/08
4
ICS9LPRS462
Low Power Clock for ATI RS/RD600 series chipsets for AMD CPUs
Absolute Max
PARAMETER
1
SYMBOL
CONDITIONS
MIN
3.3V Core Supply Voltage
3.3V Logic Input Supply
Voltage
Storage Temperature
VDD_A
-
VDD_In
-
Ts
-
GND 0.5
-65
Ambient Operating Temp
Tambient
-
0
Case Temperature
Tcase
-
Input ESD protection HBM
ESD prot
-
TYP
MAX
UNITS
Notes
VDD + 0.5V
V
1
V
1
°
VDD + 0.5V
C
1
70
°C
1
115
°C
1
V
1
150
2000
Guaranteed by design and characterization, not 100% tested in production.
Electrical Characteristics - Input/Supply/Common Output Parameters
PARAMETER
SYMBOL
CONDITIONS*
MIN
MAX
UNITS
Notes
Input High Voltage
VIH
3.3 V +/-5%
2
VDD + 0.3
V
1
Input Low Voltage
VIL
3.3 V +/-5%
VSS - 0.3
0.8
V
1
Input High Current
IIH
VIN = VDD
-5
5
uA
1
-5
uA
1
-200
uA
1
IIL1
Input Low Current
IIL2
VIN = 0 V; Inputs with no pull-up
resistors
VIN = 0 V; Inputs with pull-up
resistors
TYP
Low Threshold InputHigh Voltage
Low Threshold InputLow Voltage
VIH_FS
3.3 V +/-5%
0.7
VDD + 0.3
V
1
VIL_FS
3.3 V +/-5%
VSS - 0.3
0.35
V
1
Operating Current
IDD3.3OP
9LPRS462, all outputs driven
200
mA
1
9LPRS464, all outputs driven
180
mA
1
Powerdown Current
IDD3.3PD
all diff pairs low/low
mA
1
Input Frequency
Fi
VDD = 3.3 V
Pin Inductance
Lpin
CIN
Input Capacitance
COUT
CINX
Tfall_PD
X1 & X2 pins
From VDD Power-Up or deassertion of PD to 1st clock
Triangular Modulation
CPU output enable after
PD de-assertion
PD fall time of
Trise_PD
PD rise time of
Clk Stabilization
TSTAB
Modulation Frequency
Tdrive_PD
SMBus Voltage
21
14.31818
MHz
2
7
nH
1
Logic Inputs
5
pF
1
Output pin capacitance
6
pF
1
5
pF
1
1.8
ms
1
33
kHz
1
300
us
1
5
ns
1
5
ns
1
5.5
V
1
0.4
V
1
mA
1
1000
ns
1
300
ns
1
30
VDD
2.7
Low-level Output Voltage
VOL
@ IPULLUP
Current sinking at
IPULLUP
VOL = 0.4 V
(Max VIL - 0.15) to
SMBCLK/SMBDAT
TRI2C
(Min VIH + 0.15)
Clock/Data Rise Time
SMBCLK/SMBDAT
(Min VIH + 0.15) to
TFI2C
Clock/Data Fall Time
(Max VIL - 0.15)
*TA = 0 - 70°C; Supply Voltage VDD = 3.3 V +/-5%
4
1
Guaranteed by design and characterization, not 100% tested in production.
Input frequency should be measured at the REF pin and tuned to ideal 14.31818MHz to meet ppm frequency accuracy on PLL
outputs.
2
IDTTM/ICSTM Low Power Clock for ATI RS/RD600 series chipsets for AMD CPUs
1378A—04/07/08
5
ICS9LPRS462
Low Power Clock for ATI RS/RD600 series chipsets for AMD CPUs
AC Electrical Characteristics - Low-Power DIF Outputs: CPUKG and HTT
PARAMETER
SYMBOL
CONDITIONS
Crossing Point Variation
∆VCROSS
Single-ended Measurement
MIN
Frequency
f
Spread Specturm On
Long Term Accuracy
ppm
Spread Specturm Off
TYP
MAX
UNITS
NOTES
140
mV
1,2,5
198.8
200
MHz
1,3
-300
+300
ppm
1,11
Rising Edge Slew Rate
SRISE
Differential Measurement
0.5
10
V/ns
1,4
Falling Edge Slew Rate
SFALL
Differential Measurement
0.5
10
V/ns
1,4
Slew Rate Variation
CPU, DIF HTT Jitter - Cycle to
Cycle
Accumulated Jitter
tSLVAR
Single-ended Measurement
20
%
1
CPUJC2C
Differential Measurement
150
ps
1,6
tJACC
See Notes
1
ns
1,7
Peak to Peak Differential Voltage
VD(PK-PK)
Differential Measurement
400
2400
mV
1,8
Differential Voltage
VD
Differential Measurement
200
1200
mV
1,9
Duty Cycle
DCYC
Differential Measurement
45
55
%
1
Amplitude Variation
∆VD
Change in VD DC cycle to cycle
-75
75
mV
1,10
CPU Skew
CPUSKEW10
Differential Measurement
100
ps
1
Guaranteed by design and characterization, not 100% tested in production.
Single-ended measurement at crossing point. Value is maximum – minimum over all time. DC value of common mode is not
important due to the blocking cap.
Minimum Frequency is a result of 0.5% down spread spectrum
Differential measurement through the range of ±100 mV, differential signal must remain monotonic and within slew rate spec when
crossing through this region.
5
Defined as the total variation of all crossing voltages of CLK rising and CLK# falling. Matching applies to rising edge rate of CLK
and falling edge of CLK#. It is measured using a +/-75mV window centered on the average cross point where CLK meets CLK#.
6
Max difference of tCYCLE between any two adjacent cycles.
7
Accumulated tjc.over a 10 µs time period, measured with JIT2 TIE at 50ps interval.
8
VD(PK-PK) is the overall magnitude of the differential signal.
9
VD(min) is the amplitude of the ring-back differential measurement, guaranteed by design, that ring-back will not cross 0V VD.
VD(max) is the largest amplitude allowed.
10
The difference in magnitude of two adjacent VD_DC measurements. VD_DC is the stable post overshoot and ring-back part of
the signal.
11
All Long Term Accuracy and Clock Period specifications are guaranteed assuming that REFOUT is at 14.31818MHz
IDTTM/ICSTM Low Power Clock for ATI RS/RD600 series chipsets for AMD CPUs
1378A—04/07/08
6
ICS9LPRS462
Low Power Clock for ATI RS/RD600 series chipsets for AMD CPUs
AC Electrical Characteristics - Low-Power DIF Outputs: SRC and ATIG
PARAMETER
SYMBOL
CONDITIONS
MIN
Rising Edge Slew Rate
tSLR
Differential Measurement
Falling Edge Slew Rate
tFLR
Differential Measurement
TYP
MAX
UNITS
NOTES
0.5
2
V/ns
1,2
0.5
2
V/ns
1,2
Slew Rate Variation
tSLVAR
Single-ended Measurement
20
%
1
Maximum Output Voltage
VHIGH
Includes overshoot
1150
mV
1
Minimum Output Voltage
VLOW
Includes undershoot
-300
mV
1
Differential Voltage Swing
VSWING
Differential Measurement
300
Crossing Point Voltage
VXABS
Single-ended Measurement
300
Crossing Point Variation
VXABSVAR
Single-ended Measurement
Duty Cycle
SRC, ATIG, Jitter - Cycle to
Cycle
SRC[5:0] Skew
DCYC
Differential Measurement
SRCJ C2C
SB_SRC[1:0] Skew
ATIG[3:0] Skew
mV
1
550
mV
1,3,4
140
mV
1,3,5
55
%
1
Differential Measurement
125
ps
1
SRCSKEW
Differential Measurement
250
ps
1
SRCSKEW
Differential Measurement
100
ps
1
SRCSKEW
Differential Measurement
100
ps
1
45
1
Guaranteed by design and characterization, not 100% tested in production.
2
Slew rate measured through Vswing centered around differential zero
3
Vxabs is defined as the voltage where CLK = CLK#
4
Only applies to the differential rising edge (CLK rising and CLK# falling)
Defined as the total variation of all crossing voltages of CLK rising and CLK# falling. Matching applies to rising edge rate of
5
6
All Long Term Accuracy and Clock Period specifications are guaranteed assuming that REFOUT is at 14.31818MHz
Electrical Characteristics - USB - 48MHz
PARAMETER
SYMBOL
CONDITIONS*
MIN
Long Accuracy
ppm
see Tperiod min-max values
-100
Clock period
Tperiod
48.00MHz output nominal
Clock Low Time
Tlow
Measure from < 0.6V
Clock High Time
Thigh
Output High Voltage
VOH
Output Low Voltage
VOL
Output High Current
IOH
TYP
MAX
UNITS
NOTES
100
ppm
1,2
20.8229
20.8344
ns
2
9.3750
11.4580
ns
2
Measure from > 2.0V
9.3750
11.4580
ns
2
IOH = -1 mA
2.4
V
1
IOL = 1 mA
0.55
V OH @MIN = 1.0 V
-33
VOH@MAX = 3.135 V
-33
VOL @ MIN = 1.95 V
30
Output Low Current
IOL
Rise Time
tr_USB
VOL = 0.4 V, VOH = 2.4 V
VOL @ MAX = 0.4 V
V
1
mA
1
mA
1
mA
1
38
mA
1
0.5
1.5
ns
1
Fall Time
tf_USB
VOH = 2.4 V, VOL = 0.4 V
0.5
1.5
ns
1
Duty Cycle
dt1
VT = 1.5 V
45
55
%
1
Group Skew
tskew
VT = 1.5 V
250
ps
1
Jitter, Cycle to cycle
tjcyc-cyc
VT = 1.5 V
130
ps
1,2
*TA = 0 - 70°C; Supply Voltage VDD = 3.3 V +/-5%, CL = 5 pF with Rs = 33Ω (unless otherwise specified)
1
Guaranteed by design and characterization, not 100% tested in production.
2
ICS recommended and/or chipset vendor layout guidelines must be followed to meet this specification
IDTTM/ICSTM Low Power Clock for ATI RS/RD600 series chipsets for AMD CPUs
1378A—04/07/08
7
ICS9LPRS462
Low Power Clock for ATI RS/RD600 series chipsets for AMD CPUs
Electrical Characteristics - REF-14.318MHz
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
Notes
Long Accuracy
ppm
see Tperiod min-max values
-100
0
100
ppm
1,2
69.84
Clock period
Tperiod
14.318MHz output nominal
69.8270
69.8550
ns
2
Clock Low Time
Tlow
Measure from < 0.6V
30.9290
37.9130
ns
2
Clock High Time
Thigh
Measure from > 2.0V
30.9290
37.9130
ns
2
Output High Voltage
VOH
IOH = -1 mA
2.4
V
1
Output Low Voltage
VOL
IOL = 1 mA
0.4
V
1
Output High Current
IOH
VOH @MIN = 1.0 V,
VOH@MAX = 3.135 V
-29
-23
mA
1
Output Low Current
IOL
VOL @MIN = 1.95 V,
VOL @MAX = 0.4 V
29
27
mA
1
Rise Time
tr1
VOL = 0.4 V, VOH = 2.4 V
1
1.5
ns
1
Fall Time
tf1
VOH = 2.4 V, VOL = 0.4 V
1
1.5
ns
1
100
ps
1
55
%
1
300
ps
1
Skew
tsk1
VT = 1.5 V
Duty Cycle
dt1
VT = 1.5 V
Jitter
tjcyc-cyc
VT = 1.5 V
45
*TA = 0 - 70°C; Supply Voltage VDD = 3.3 V +/-5%, CL = 5 pF with Rs = 33Ω (unless otherwise specified)
1
Guaranteed by design and characterization, not 100% tested in production.
2
All Long Term Accuracy and Clock Period specifications are guaranteed assuming that REFOUT is at 14.31818MHz
IDTTM/ICSTM Low Power Clock for ATI RS/RD600 series chipsets for AMD CPUs
1378A—04/07/08
8
ICS9LPRS462
Low Power Clock for ATI RS/RD600 series chipsets for AMD CPUs
Table1: CPU and HTT Frequency Selection Table
Byte 0
Bit4 Bit3 Bit2 Bit1 Bit0 CPUCLK
HTT
Spread Overclock
(2:0)
(MHz)
%
%
CPU CPU CPU CPU CPU
(MHz)
SS_EN FS3 FS2 FS1 FS0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
Hi-Z
X/2
230.00
240.00
100.00
133.33
166.67
200.00
250.00
260.00
270.00
280.00
102.00
136.00
170.00
204.00
210.00
220.00
230.00
240.00
100.00
133.33
166.67
200.00
250.00
260.00
270.00
280.00
102.00
136.00
170.00
204.00
Hi-Z
X/3
76.67
80.00
66.67
66.67
66.67
66.67
83.33
86.67
90.00
93.33
68.00
68.00
68.00
68.00
70.00
73.33
76.67
80.00
66.67
66.67
66.67
66.67
83.33
86.67
90.00
93.33
68.00
68.00
68.00
68.00
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
-0.5%
-0.5%
-0.5%
-0.5%
-0.5%
-0.5%
-0.5%
-0.5%
-0.5%
-0.5%
-0.5%
-0.5%
-0.5%
-0.5%
-0.5%
-0.5%
15%
20%
0%
25%
30%
35%
40%
2%
5%
10%
15%
20%
0%
25%
30%
35%
40%
2%
IDTTM/ICSTM Low Power Clock for ATI RS/RD600 series chipsets for AMD CPUs
1378A—04/07/08
9
ICS9LPRS462
Low Power Clock for ATI RS/RD600 series chipsets for AMD CPUs
Table2: SRC Frequency Selection Table
Byte 5
Byte 0
Bit 5 Bit3 Bit2 Bit1 Bit0 SRC(7:0)
SRC SRC SRC SRC SRC (MHz)
SS_EN FS3 FS2 FS1 FS0
0
0
0
0
0
100.00
0
0
0
0
1
101.00
0
0
0
1
0
102.00
0
0
0
1
1
103.00
0
0
1
0
0
104.00
0
0
1
0
1
105.00
0
0
1
1
0
106.00
0
0
1
1
1
107.00
0
1
0
0
0
100.00
0
1
0
0
1
101.00
0
1
0
1
0
102.00
0
1
0
1
1
103.00
0
1
1
0
0
104.00
0
1
1
0
1
105.00
0
1
1
1
0
106.00
0
1
1
1
1
107.00
1
0
0
0
0
100.00
1
0
0
0
1
101.00
1
0
0
1
0
102.00
1
0
0
1
1
103.00
1
0
1
0
0
104.00
1
0
1
0
1
105.00
1
0
1
1
0
106.00
1
0
1
1
1
107.00
1
1
0
0
0
100.00
1
1
0
0
1
101.00
1
1
0
1
0
102.00
1
1
0
1
1
103.00
1
1
1
0
0
104.00
1
1
1
0
1
105.00
1
1
1
1
0
106.00
1
1
1
1
1
107.00
SRC
Spread
OverClock
%
%
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
-0.25%
-0.25%
-0.25%
-0.25%
-0.25%
-0.25%
-0.25%
-0.25%
-0.5%
-0.5%
-0.5%
-0.5%
-0.5%
-0.5%
-0.5%
-0.5%
0%
1%
2%
3%
4%
5%
6%
7%
0%
1%
2%
3%
4%
5%
6%
7%
0%
1%
2%
3%
4%
5%
6%
7%
0%
1%
2%
3%
4%
5%
6%
7%
IDTTM/ICSTM Low Power Clock for ATI RS/RD600 series chipsets for AMD CPUs
1378A—04/07/08
10
ICS9LPRS462
Low Power Clock for ATI RS/RD600 series chipsets for AMD CPUs
Table3: ATIG Frequency Selection Table
Byte 9
Byte 0
ATIG
Bit 6 Bit4 Bit3 Bit1 Bit0
ATIG(2:0) Spread
OverClock
%
ATIG ATIG ATIG ATIG ATIG (MHz)
%
SS_EN FS3 FS2 FS1 FS0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
100.00
105.00
110.00
115.00
120.00
125.00
130.00
135.00
100.00
105.00
110.00
115.00
120.00
125.00
130.00
135.00
100.00
105.00
110.00
115.00
120.00
125.00
130.00
135.00
100.00
105.00
110.00
115.00
120.00
125.00
130.00
135.00
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
-0.25%
-0.25%
-0.25%
-0.25%
-0.25%
-0.25%
-0.25%
-0.25%
-0.5%
-0.5%
-0.5%
-0.5%
-0.5%
-0.5%
-0.5%
-0.5%
0%
5%
10%
15%
20%
25%
30%
35%
0%
5%
10%
15%
20%
25%
30%
35%
0%
5%
10%
15%
20%
25%
30%
35%
0%
5%
10%
15%
20%
25%
30%
35%
IDTTM/ICSTM Low Power Clock for ATI RS/RD600 series chipsets for AMD CPUs
1378A—04/07/08
11
ICS9LPRS462
Low Power Clock for ATI RS/RD600 series chipsets for AMD CPUs
Divider (1:0)
Table 4: CPU Divider Ratios
B19b(7:4)
00
Bit
00
0000
01
0001
10
0010
11
0011
Address
LSB
Divider (1:0)
Table 5: HTT Divider Ratios
B20b(3:0)
00
Bit
00
0000
01
0001
10
0010
11
0011
Address
LSB
Divider (1:0)
Table 6: ATIG Divider Ratios
B19b(3:0)
00
Bit
00
0000
01
0001
10
0010
11
0011
Address
LSB
2
3
5
15
Div
Divider (3:2)
01
10
0100
4
1000
0101
6
1001
0110
10
1010
0111
30
1011
Address
Address
4
3
5
15
Div
Divider (3:2)
01
10
0100
8
1000
0101
6
1001
0110
10
1010
0111
30
1011
Address
Address
8
12
20
60
Div
11
1100
1101
1110
1111
Address
MSB
16
24
40
120
Div
16
12
20
60
Div
11
1100
1101
1110
1111
Address
MSB
32
24
40
120
Div
8
12
20
28
Div
11
1100
1101
1110
1111
Address
MSB
16
24
40
56
Div
Divider (3:2)
2
3
5
7
Div
01
0100
0101
0110
0111
Address
4
6
10
14
10
1000
1001
1010
1011
Address
CPU Clock
Common Recommendations for Differential Routing
L1 length, Route as coupled 93 ohm trace.
L2 length, Route as coupled 93 ohm trace.
Dimension or Value
0.5 max
Contact AMD
Unit
inch
inch
Figure
1
1
Figure 1 CPU clock routing.
3900pF
+/-10%
93Ω +/-10% DIFF
L2
L2
93Ω +/-10% DIFF
L1
169Ω +/-10%
L1
3900pF
+/-10%
Low Power Output Buffer
w/integrated series resistor
AMD "Greyhound"
CPU input
IDTTM/ICSTM Low Power Clock for ATI RS/RD600 series chipsets for AMD CPUs
1378A—04/07/08
12
ICS9LPRS462
Low Power Clock for ATI RS/RD600 series chipsets for AMD CPUs
SRC Reference Clock
Common Recommendations for Differential Routing
Dimension or Value
L1 length, Route as non-coupled 50 ohm trace.
0.5 max
L2 length, Route as non-coupled 50 ohm trace.
N/A
L3 length, Route as non-coupled 50 ohm trace.
N/A
Rs
33
Rt
49.9
Unit
inch
inch
inch
ohm
ohm
Figure
2
2
2
2
2
Down Device Differential Routing
L4 length, Route as coupled microstrip 100 ohm differential trace.
L4 length, Route as coupled stripline 100 ohm differential trace.
Dimension or Value
2 min to 16 max
1.8 min to 14.4 max
Unit
inch
inch
Figure
2
2
Differential Routing to PCI Express Connector
L4 length, Route as coupled microstrip 100 ohm differential trace.
L4 length, Route as coupled stripline 100 ohm differential trace.
Dimension or Value
0.25 to 14 max
0.225 min to 12.6 max
Unit
inch
inch
Figure
3
3
Figure 2 Down device routing.
L1
L4
L4’
L1’
PCI Ex Board
Down Device
REF_CLK Input
Low Power Output Buffer
w/integrated series resistor
Figure 2
Figure 3 PCI Express Connector Routing.
L1
L4
L4’
L1’
Low Power Output Buffer
w/integrated series resistor
PCI Ex
Add In Board
REF_CLK Input
Figure 3
IDTTM/ICSTM Low Power Clock for ATI RS/RD600 series chipsets for AMD CPUs
1378A—04/07/08
13
ICS9LPRS462
Low Power Clock for ATI RS/RD600 series chipsets for AMD CPUs
General SMBus serial interface information for the ICS9LPRS462
How to Write:
How to Read:
Controller (host) sends a start bit.
Controller (host) sends the write address D2 (H)
ICS clock will acknowledge
Controller (host) sends the begining byte location = N
ICS clock will acknowledge
Controller (host) sends the data byte count = X
ICS clock will acknowledge
Controller (host) starts sending Byte N through
Byte N + X -1
• ICS clock will acknowledge each byte one at a time
• Controller (host) sends a Stop bit
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Controller (host) will send start bit.
Controller (host) sends the write address D2 (H)
ICS clock will acknowledge
Controller (host) sends the begining byte
location = N
ICS clock will acknowledge
Controller (host) will send a separate start bit.
Controller (host) sends the read address D3 (H)
ICS clock will acknowledge
ICS clock will send the data byte count = X
ICS clock sends Byte N + X -1
ICS clock sends Byte 0 through byte X (if X(H)
was written to byte 8).
Controller (host) will need to acknowledge each byte
Controllor (host) will send a not acknowledge bit
Controller (host) will send a stop bit
Index Block Write Operation
Controller (Host)
starT bit
T
Slave Address D2(H)
WR
WRite
Index Block Read Operation
Controller (Host)
T
starT bit
Slave Address D2(H)
WR
WRite
ICS (Slave/Receiver)
ICS (Slave/Receiver)
ACK
ACK
Beginning Byte = N
Beginning Byte = N
ACK
ACK
RT
Repeat starT
Slave Address D3(H)
RD
ReaD
Data Byte Count = X
ACK
Beginning Byte N
ACK
X Byte
ACK
Data Byte Count = X
ACK
Beginning Byte N
Byte N + X - 1
ACK
X Byte
ACK
P
stoP bit
Byte N + X - 1
N
P
IDTTM/ICSTM Low Power Clock for ATI RS/RD600 series chipsets for AMD CPUs
Not acknowledge
stoP bit
1378A—04/07/08
14
ICS9LPRS462
Low Power Clock for ATI RS/RD600 series chipsets for AMD CPUs
SMBus Table: Spread Spectrum Enable and CPU Frequency Select Register
Byte 0
Pin #
Name
Control Function
Type
Latched Input or SMBus
RW
FS Source
Bit 7
Frequency Select
ATIG SS_EN
ATIG Spread Spectrum Enable
RW
Bit 6
SRC SS_EN
SRC Spread Spectrum Enable
RW
Bit 5
CPU SS_EN
CPU Spread Spectrum Enable
RW
Bit 4
CPU FS3
CPU Freq Select Bit 3
RW
Bit 3
CPU FS2
CPU Freq Select Bit 2
RW
Bit 2
CPU FS1
CPU Freq Select Bit 1
RW
Bit 1
CPU FS0
CPU Freq Select Bit 0
RW
Bit 0
Note: Each Spread Spectrum Enable bit is independent from the other.
Bit(6:4) must all set to "1" in order to enable spread for CPU, SRC and ATIG clocks.
SMBus Table: Output Control Register
Byte 1
Pin #
Name
7
48MHz_1
Bit 7
6
48MHz_0
Bit 6
54
REF2
Bit 5
55
REF1
Bit 4
56
REF0
Bit 3
51
HTTCLK0
Bit 2
44,43
CPUCLK1
Bit 1
48,47
CPUCLK0
Bit 0
Control Function
48MHz_1 Output Enable
48MHz_0 Output Enable
REF2 Output Enable
REF1 Output Enable
REF0 Output Enable
HTTCLK0 Output Enable
CPUCLK1 Output Enable
CPUCLK0 Output Enable
SMBus Table: ATIGCLK and CLKREQB# Output Control Register
Byte 2
Pin #
Name
Control Function
Reserved
Bit 7
Reserved
Bit 6
31,30
ATIGCLK1
ATIGCLK1 Output Enable
Bit 5
35,34
ATIGCLK0
ATIGCLK0 Output Enable
Bit 4
Bit 3
20,21
REQBSRC2
Bit 0
1
PWD
SMBus
0
Enable
Enable
Enable
0
0
0
0
Latch
Latch
Latch
See Table 1:
CPU Frequency Selection
Table
Type
RW
RW
RW
RW
RW
RW
RW
RW
0
Disable
Disable
Disable
Disable
Disable
Disable
Disable
Disable
1
Enable
Enable
Enable
Enable
Enable
Enable
Enable
Enable
PWD
1
1
1
1
1
1
1
1
Type
0
1
RW
RW
Disable
Disable
Does not
control
Enable
Enable
PWD
0
0
1
1
Controls
0
RW
Reserved
Bit 2
Bit 1
CLKREQB# Controls SRC2
0
Latched
Inputs
Disable
Disable
Disable
24,25
REQBSRC1
CLKREQB# Controls SRC1
0
RW
Does not
control
Controls
Reserved
SMBus Table: SRCCLK Output Control Register
Byte 3
Pin #
Name
Control Function
12,13
SRCCLK5
Bit 7
16,17
SRCCLK4
Bit 6
18,19
SRCCLK3
Bit 5
Master Output control. Enables
20,21
SRCCLK2
Bit 4
or disables output, regardless of
Reserved
Bit 3
CLKREQ# inputs.
24,25
SRCCLK1
Bit 2
Reserved
Bit 1
39,38
SRCCLK0
Bit 0
IDTTM/ICSTM Low Power Clock for ATI RS/RD600 series chipsets for AMD CPUs
0
0
Type
RW
RW
RW
RW
RW
RW
0
Disable
Disable
Disable
Disable
Disable
Disable
1
Enable
Enable
Enable
Enable
Enable
Enable
PWD
1
1
1
1
1
1
1
1
1378A—04/07/08
15
ICS9LPRS462
Low Power Clock for ATI RS/RD600 series chipsets for AMD CPUs
SMBus Table: CLKREQB# and CLKREQC# Output Control Register
Byte 4
Pin #
Name
Control Function
Type
Bit 7
12,13
REQASRC5
CLKREQA# Controls SRC5
RW
Bit 6
16,17
REQASRC4
CLKREQA# Controls SRC4
RW
Bit 5
18,19
REQASRC3
CLKREQA# Controls SRC3
RW
PWD
Controls
0
Controls
0
Controls
0
0
0
Bit 2
31,30
REQCATIG1
CLKREQC# Controls ATIG1
RW
Bit 1
35,34
REQCATIG0
CLKREQC# Controls ATIG0
RW
Bit 0
39,38
REQCSRC0
CLKREQC# Controls SRC0
RW
SMBus Table: CPU Stop Control and SRC Frequency Select Register
Byte 5
Pin #
Name
Control Function
IO Output Voltage Select (Most
IO_VOUT2
Bit 7
Significant Bit)
IO_VOUT1
IO Output Voltage Select
Bit 6
IO Output Voltage Select (Least
IO_VOUT0
Bit 5
Significant Bit)
Reserved
Bit 4
SRC FS3
SRC Freq Select Bit 3
Bit 3
Bit 1
Bit 0
1
Reserved
Reserved
Bit 4
Bit 3
Bit 2
0
Does not
control
Does not
control
Does not
control
-
SRC FS2
SRC FS1
SRC FS0
SMBus Table: Device ID Register
Byte 6
Pin #
Name
Device ID7 (MSB)
Bit 7
Device ID6
Bit 6
Device
ID5
Bit 5
Device ID4
Bit 4
Device ID3
Bit 3
Device ID2
Bit 2
Device ID1
Bit 1
Device
ID0 (LSB)
Bit 0
SMBus Table: Revision and Vendor ID Register
Byte 7
Pin #
Name
RID3
Bit 7
RID2
Bit 6
RID1
Bit 5
RID0
Bit 4
VID3
Bit 3
VID2
Bit 2
VID1
Bit 1
VID0
Bit 0
Type
Does not
control
Does not
control
Does not
control
0
Controls
0
Controls
0
Controls
0
1
PWD
RW
RW
1
See Table 8: V_IO Selection
(Default is 0.8V)
0
RW
1
RW
0
0
See Table 2:
SRC Frequency Selection
Table
SRC Freq Select Bit 2
SRC Freq Select Bit 1
SRC Freq Select Bit 0
RW
RW
RW
Control Function
Type
R
R
R
R
R
R
R
R
0
-
1
-
PWD
0
1
1
0
0
1
0
0
Type
R
R
R
R
R
R
R
R
0
-
1
-
PWD
0
0
0
0
0
0
0
1
DEVICE ID
Control Function
REVISION ID
VENDOR ID
IDTTM/ICSTM Low Power Clock for ATI RS/RD600 series chipsets for AMD CPUs
0
0
0
1378A—04/07/08
16
ICS9LPRS462
Low Power Clock for ATI RS/RD600 series chipsets for AMD CPUs
SMBus Table: Byte Count Register
Byte 8
Pin #
Name
BC7
Bit 7
BC6
Bit 6
BC5
Bit 5
BC4
Bit 4
BC3
Bit 3
BC2
Bit 2
BC1
Bit 1
BC0
Bit 0
Control Function
Byte Count Programming b(7:0)
Type
RW
RW
RW
RW
RW
RW
RW
RW
0
1
PWD
0
0
0
Writing to this register will
congiure how many bytes will
0
be read back, default is 9
1
bytes.
0
0
1
SMBus Table: REF2, 48MHz Output Strength Control and ATIG Frequency Select Register
Byte 9
Pin #
Name
Control Function
Type
0
1
54
REF2Str
REF2 Strength Control
RW
1X
2X
Bit 7
7
48MHz_1Str
48MHz_1 Strength Control
RW
1X
2X
Bit 6
6
48MHz_0Str
48MHz_0 Strength Control
RW
1X
2X
Bit 5
Reserved
Bit 4
ATIG FS3
ATIG Freq Select Bit 3
RW
Bit 3
See Table 3: ATIG
ATIG FS2
ATIG Freq Select Bit 2
RW
Bit 2
Frequency Selection Table
ATIG FS1
ATIG Freq Select Bit 1
RW
Bit 1
ATIG FS0
ATIG Freq Select Bit 0
RW
Bit 0
PWD
1
1
1
0
0
0
0
0
SMBus Table: PLLs M/N Programming Enable and REF1, REF0 Output Strength Control Register
Byte 10 Pin #
Name
Control Function
Type
0
M/N_EN
PLLs M/N Programming Enable
RW
Disable
Bit 7
55
REF1Str
REF1 Strength Control
RW
1X
Bit 6
56
REF0Str
REF0 Strength Control
RW
1X
Bit 5
Reserved
Bit 4
Reserved
Bit 3
Reserved
Bit 2
Reserved
Bit 1
Reserved
Bit 0
1
Enable
2X
2X
PWD
0
1
1
0
0
0
0
0
1
PWD
X
X
X
X
X
X
X
X
SMBus Table: CPU PLL VCO Frequency Control Register
Byte 11 Pin #
Name
Control Function
N Div8
N Divider Prog bit 8
Bit 7
N Div 9
N Divider Prog bit 9
Bit 6
M Div5
Bit 5
M Div4
Bit 4
M Div3
Bit 3
M Divider Programming bits
M Div2
Bit 2
M Div1
Bit 1
M Div0
Bit 0
Type
RW
RW
RW
RW
RW
RW
RW
RW
The decimal representation of
M and N Divier in Byte 11 and
12 will configure the VCO
frequency. Default at power
up = latch-in or Byte 0 Rom
table. VCO Frequency =
14.318 x [NDiv(9:0)+8] /
[MDiv(5:0)+2]
SMBus Table: CPU PLL VCO Frequency Control Register
Byte 12 Pin #
Name
Control Function
N Div7
Bit 7
N Div6
Bit 6
N Div5
Bit 5
N Div4
Bit 4
N Divider Programming b(7:0)
N Div3
Bit 3
N Div2
Bit 2
N Div1
Bit 1
N Div0
Bit 0
Type
RW
RW
RW
RW
RW
RW
RW
RW
The decimal representation of
M and N Divier in Byte 11 and
12 will configure the VCO
frequency. Default at power
up = latch-in or Byte 0 Rom
table. VCO Frequency =
14.318 x [NDiv(9:0)+8] /
[MDiv(5:0)+2]
IDTTM/ICSTM Low Power Clock for ATI RS/RD600 series chipsets for AMD CPUs
0
0
1
PWD
X
X
X
X
X
X
X
X
1378A—04/07/08
17
ICS9LPRS462
Low Power Clock for ATI RS/RD600 series chipsets for AMD CPUs
SMBus Table: CPU PLL Spread Spectrum Control Register
Byte 13 Pin #
Name
Control Function
SSP7
Bit 7
SSP6
Bit 6
SSP5
Bit 5
SSP4
Spread Spectrum Programming
Bit 4
b(7:0)
SSP3
Bit 3
SSP2
Bit 2
SSP1
Bit 1
SSP0
Bit 0
SMBus Table: CPU PLL Spread Spectrum Control Register
Byte 14 Pin #
Name
Control Function
Reserved
Bit 7
SSP14
Bit 6
SSP13
Bit 5
SSP12
Bit 4
Spread Spectrum Programming
SSP11
Bit 3
b(14:8)
SSP10
Bit 2
SSP9
Bit 1
SSP8
Bit 0
Type
RW
RW
RW
RW
RW
RW
RW
RW
Type
RW
RW
RW
RW
RW
RW
RW
SMBus Table: ATIG PLL VCO Frequency Control Register
Byte 15 Pin #
Name
Control Function
N Div8
N Divider Prog bit 8
Bit 7
N Div9
N Divider Prog bit 9
Bit 6
M Div5
Bit 5
M Div4
Bit 4
M Div3
Bit 3
M Divider Programming bits
M Div2
Bit 2
M Div1
Bit 1
M Div0
Bit 0
Type
RW
RW
RW
RW
RW
RW
RW
RW
SMBus Table: ATIG PLL VCO Frequency Control Register
Byte 16 Pin #
Name
Control Function
N Div7
Bit 7
N Div6
Bit 6
N Div5
Bit 5
N Div4
Bit 4
N Divider Programming b(7:0)
N Div3
Bit 3
N Div2
Bit 2
N Div1
Bit 1
N Div0
Bit 0
Type
RW
RW
RW
RW
RW
RW
RW
RW
SMBus Table: ATIG PLL Spread Spectrum Control Register
Byte 17 Pin #
Name
Control Function
SSP7
Bit 7
SSP6
Bit 6
SSP5
Bit 5
SSP4
Spread Spectrum Programming
Bit 4
b(7:0)
SSP3
Bit 3
SSP2
Bit 2
SSP1
Bit 1
SSP0
Bit 0
Type
RW
RW
RW
RW
RW
RW
RW
RW
IDTTM/ICSTM Low Power Clock for ATI RS/RD600 series chipsets for AMD CPUs
0
1
PWD
X
X
These Spread Spectrum bits
in Byte 13 and 14 will program X
X
the spread pecentage. It is
recommended to use ICS
X
Spread % table for spread
X
programming.
X
X
0
1
0
1
0
1
0
1
PWD
0
X
These Spread Spectrum bits
X
in Byte 13 and 14 will program
X
the spread pecentage. It is
X
recommended to use ICS
X
Spread % table for spread
X
programming.
X
PWD
X
The decimal representation of
X
M and N Divier in Byte 17 and
X
18 will configure the VCO
X
frequency. Default at power
X
up = Byte 0 Rom table. VCO
X
Frequency = 14.318 x
X
[NDiv(9:0)+8] / [MDiv(5:0)+2]
X
PWD
X
The decimal representation of
X
M and N Divier in Byte 17 and
X
18 will configure the VCO
X
frequency. Default at power
X
up = Byte 0 Rom table. VCO
X
Frequency = 14.318 x
X
[NDiv(9:0)+8] / [MDiv(5:0)+2]
X
PWD
X
X
These Spread Spectrum bits
in Byte 19 and 20 will program X
X
the spread pecentage. It is
recommended to use ICS
X
Spread % table for spread
X
programming.
X
X
1378A—04/07/08
18
ICS9LPRS462
Low Power Clock for ATI RS/RD600 series chipsets for AMD CPUs
SMBus Table: ATIG PLL Spread Spectrum Control Register
Byte 18 Pin #
Name
Control Function
Reserved
Bit 7
SSP14
Bit 6
SSP13
Bit 5
SSP12
Bit 4
Spread Spectrum Programming
SSP11
Bit 3
b(14:8)
SSP10
Bit 2
SSP9
Bit 1
SSP8
Bit 0
SMBus Table: CPU and ATIG Divider Ratio Programming Bits Select Register
Byte 19 Pin #
Name
Control Function
CPU_Div3
Bit 7
CPU_Divider Ratio
CPU_Div2
Bit 6
Programming Bits
CPU_Div1
Bit 5
CPU_Div0
Bit 4
ATIG_Div3
Bit 3
ATIG_Divider Ratio
ATIG_Div2
Bit 2
Programming Bits
ATIG_Div1
Bit 1
ATIG_Div0
Bit 0
SMBus Table: HTT Divider Ratio Programming Bits Select Register
Byte 20 Pin #
Name
Control Function
Reserved
Bit 7
Reserved
Bit 6
Reserved
Bit 5
Reserved
Bit 4
HTT_Div3
Bit 3
HTT_Div2
HTT_Divider Ratio
Bit 2
Programming Bits
HTT_Div1
Bit 1
HTT_Div0
Bit 0
IDTTM/ICSTM Low Power Clock for ATI RS/RD600 series chipsets for AMD CPUs
Type
RW
RW
RW
RW
RW
RW
RW
Type
RW
RW
RW
RW
RW
RW
RW
RW
Type
RW
RW
RW
RW
0
1
PWD
0
X
These Spread Spectrum bits
X
in Byte 19 and 20 will program
X
the spread pecentage. It is
X
recommended to use ICS
X
Spread % table for spread
X
programming.
X
0
1
See Table 4:
CPU Divider Ratios
See Table 5:
ATIG Divider Ratios
0
1
See Table 6:
HTT Divider Ratios
PWD
X
X
X
X
X
X
X
X
PWD
0
0
0
0
X
X
X
X
1378A—04/07/08
19
ICS9LPRS462
Low Power Clock for ATI RS/RD600 series chipsets for AMD CPUs
RESET_IN# - Assertion (transition from '1' to '0')
Asserting RESET_IN pin stops all the outputs including CPU, SRC, ATIG, PCI and USB with the REF[2:0] running.
The pin is a Schmitt trigger input with debouncing. After it is triggered, REF clocks will wait for two clock cycle to
ensure the RESET_IN is asserted. Then, it will take 3uS for the clocks to stop without glitches. The clock chip will
be power down and re-power up, and SMBus will be reloaded. It will take no more than 2.5mS for the clocks to come
out with correct frequencies and no glitches.
** Deassertion of RESET_IN# (transition from '0' to '1') has NO effect on the clocks.
2 clock
cycles
2.5mS max
3 uS max
RESET_IN#
REF [2:0]
*CLKS
IDTTM/ICSTM Low Power Clock for ATI RS/RD600 series chipsets for AMD CPUs
1378A—04/07/08
20
ICS9LPRS462
Low Power Clock for ATI RS/RD600 series chipsets for AMD CPUs
Shared Pin Operation Input/Output Pins
The I/O pins designated by (input/output) on the ICS9LPRS462
serve as dual signal functions to the device. During initial powerup, they act as input pins. The logic level (voltage) that is present
on these pins at this time is read and stored into a 5-bit internal
data latch. At the end of Power-On reset, (see AC characteristics
for timing values), the device changes the mode of operations for
these pins to an output function. In this mode the pins produce the
specified buffered clocks to external loads.
low. If programmability is not necessary, than only a single resistor
is necessary. The programming resistors should be located close
to the series termination resistor to minimize the current loop area.
It is more important to locate the series termination resistor close
to the driver than the programming resistor.
To program (load) the internal configuration register for these pins,
a resistor is connected to either the VDD (logic 1) power supply or
the GND (logic 0) voltage potential. A 10 Kilohm (10K) resistor is
used to provide both the solid CMOS programming voltage needed
during the power-up programming period and to provide an
insignificant load on the output clock during the subsequent
operating period.
Figure 1 shows a means of implementing this function when a
switch or 2 pin header is used. With no jumper is installed the pin
will be pulled high. With the jumper in place the pin will be pulled
Via to
VDD
Programming
Header
2K W
Via to Gnd
Device
Pad
8.2K W
Clock trace to load
Series Term. Res.
Fig. 1
IDTTM/ICSTM Low Power Clock for ATI RS/RD600 series chipsets for AMD CPUs
1378A—04/07/08
21
ICS9LPRS462
Low Power Clock for ATI RS/RD600 series chipsets for AMD CPUs
c
N
SYMBOL
L
E1
INDEX
AREA
A
A1
A2
b
c
D
E
E1
e
L
N
α
aaa
E
1 2
a
D
6.10 mm. Body, 0.50 mm. Pitch TSSOP
(240 mil)
(20 mil)
In Millimeters
In Inches
COMMON DIMENSIONS
COMMON DIMENSIONS
MIN
MAX
MIN
MAX
-1.20
-.047
0.05
0.15
.002
.006
0.80
1.05
.032
.041
0.17
0.27
.007
.011
0.09
0.20
.0035
.008
SEE VARIATIONS
SEE VARIATIONS
8.10 BASIC
0.319 BASIC
6.00
6.20
.236
.244
0.50 BASIC
0.020 BASIC
0.45
0.75
.018
.030
SEE VARIATIONS
SEE VARIATIONS
0°
8°
0°
8°
-0.10
-.004
VARIATIONS
N
A
A2
64
A1
b
D (inch)
MAX
17.10
MIN
.665
MAX
.673
Reference Doc.: JEDEC Publication 95, MO-153
-Ce
D mm.
MIN
16.90
10-0039
SEATING
PLANE
aaa C
Ordering Information
ICS 9LPRS462yGLFT
Example:
ICS XXXX y G LF T
Designation for tape and reel packaging
Lead Free, RoHS Compliant
Package Type
G = TSSOP
Revision Designator (will not correlate with datasheet revision)
Device Type
IDTTM/ICSTM Low Power Clock for ATI RS/RD600 series chipsets for AMD CPUs
1378A—04/07/08
22
ICS9LPRS462
Low Power Clock for ATI RS/RD600 series chipsets for AMD CPUs
Revision History
Rev.
A
Issue Date Description
1. Updated IDD current.
2. Added Down device routing Diagram and PCI Express Connector Routing Diagram.
3. Going to Release.
4. Updated Rs on REF & USB to 33ohm.
4/7/2008 5. Corrected REF ppm to +/- 100ppm.
Page #
5,7-8,13
This product is protected by United States Patent NO. 7,342,420 and other patents.
Innovate with IDT and accelerate your future networks. Contact:
www.IDT.com
TM
For Sales
For Tech Support
800-345-7015
408-284-8200
Fax: 408-284-2775
408-284-6578
[email protected]
Corporate Headquarters
Asia Pacific and Japan
Europe
Integrated Device Technology, Inc.
6024 Silver Creek Valley Road
San Jose, CA 95138
United States
800 345 7015
+408 284 8200 (outside U.S.)
Integrated Device Technology
Singapore (1997) Pte. Ltd.
Reg. No. 199707558G
435 Orchard Road
#20-03 Wisma Atria
Singapore 238877
+65 6 887 5505
IDT Europe, Limited
Prime House
Barnett Wood Lane
Leatherhead, Surrey
United Kingdom KT22 7DE
+44 1372 363 339
© 2006 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo are trademarks of Integrated
Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks
or registered trademarks used to identify products or services of their respective owners.
Printed in USA
23