tSENSITRON IMXXXXHX1W Series SEMICONDUCTOR TECHNICAL DATA DATA SHEET 1000, REV. - 1 WATT ISOLATED MINIATURE DC-DC CONVERTERS FEATURES: • Isolation Voltage: • Isolation Resistance (1): • Over Current Protection: • Case Temp Rise: • Cooling Method: • Standby Power Dissipation: • Operating Temp.: • Storage Temp.: • Humidity: • Soldering Temp (2): • Case Material: 1000Vdc 1000MΩ (min.) Temporary Short-Circuit Protection 40°C (max) Free-Air Cooling 100mW -40ºC~85ºC -50ºC~125ºC <95% 230ºC Non-Flammable Material (UL94-V0) IMXXXXHX1W Series Input Characteristics Product Type IM05XXHS/D1W Nominal Input Voltage 5Vdc Input Voltage Range 4.75~5.25Vdc Transient Voltage (3) 6Vdc IM12XXHS/D1W 12Vdc 11.4~12.6Vdc 14Vdc IM15XXHS/D1W 15Vdc 14.25~15.75Vdc 18Vdc IM24XXHS/D1W 24Vdc 22.8~25.2Vdc 27Vdc IM48XXHS/D1W 48Vdc 45.6~50.4Vdc 52Vdc IMXXXXHX1W Series Output Characteristics Part Number Output Voltage Full Load Output Current Output Voltage Tolerance IMXX05HX1W 5Vdc 150mA Specifications are standard at Input nominal voltage, full output load and TA =25ºC unless otherwise specified. IMXX09HX1W 9Vdc IMXX12HX1W 12Vdc 111mA 83mA 67mA +3% Load Regulation 0.5% max. Line Regulation 0.3% max. Temp Coefficient 0.03%/ºC (typical) Ripple (20MHz band width) IMXX15HX1W 15Vdc 20mV p-p max. Efficiency @ 100% Load, 55% 60% 63% 5V Input Efficiency @ 100% Load, 65% 70% 72% 12V, 15V, 24V, 48V Input *1- Test @ TA = 25ºC and under 70% of the humidity with 500Vdc. *2- Soldering for 5 seconds at 1.5mm away from the edge. *3- The excessive over voltage above this value may cause permanent damage to the device. • 221 West Industry Court • Deer Park, NY 11729-4681 • Phone (631) 586-7600 • Fax (631) 242-9798 • • World Wide Web Site - http://www.sensitron.com • E-Mail Address - [email protected] • 65% 75% tSENSITRON IMXXXXHX1W Series SEMICONDUCTOR TECHNICAL DATA DATA SHEET 1000, REV. - PIN CONFIGURATION IMXXXXHD – 1W PACKAGE DIMENSIONS +Vin -Vin 14 -Vout 11 IMXXXXHS – 1W PACKAGE DIMENSIONS +Vout 9 1 1 2 4 6 -Vout +Vout 7 NC NC +Vin -Vin DIP SIP BLOCK DIAGRAM DC-DC Converter DC Source + +Vin +Vo DC Load 5/12/15/24/48V - -V in -Vo Part Number Definition / Ordering information: I M XX YY H S / D 1W I = Isolated M = Miniature XX = Input Voltage YY = Output Voltage H = Temperature Range (-40°C ~ +85°C) S/D = Single inline package / Dual inline package 1W = Output Wattage • 221 West Industry Court • Deer Park, NY 11729-4681 • Phone (631) 586-7600 • Fax (631) 242-9798 • • World Wide Web Site - http://www.sensitron.com • E-Mail Address - [email protected] • tSENSITRON IMXXXXHX1W Series SEMICONDUCTOR TECHNICAL DATA DATA SHEET 1000, REV. - Mechanical Dimension: in inches / (mm) IMXXXXHD1W PACKAGE DIMENSIONS IMXXXXHS1W PACKAGE DIMENSIONS IM050HD1W IM050SD1W (FIGURE 2) (FIGURE 1) DIP SIP DEMENSIONAL RECOMMENDATIONS FOR PCBLAYOUT DIP PACKAGE DIMENSIONS SIP PACKAGE DIMENSIONS • 221 West Industry Court • Deer Park, NY 11729-4681 • Phone (631) 586-7600 • Fax (631) 242-9798 • • World Wide Web Site - http://www.sensitron.com • E-Mail Address - [email protected] •