IMD14 Transistors IMD14 General purpose (dual digital transistors) IMD14 (1) (2) 0.95 0.95 (3) (4) (5) 0.3 (6) zExternal dimensions (Unit : mm) zFeatures 1) Two 500 mA digital transistor chips in a SMT package. 2) The drive transistors are independent, eliminating interference. 1.6 zAbsolute maximum ratings (Ta=25°C) VIN Input voltage Output current Power dissipation Junction temperature Storage temperature 5 Pd −5 500 300 (TOTAL) Tj 150 Tstg −55 to +150 IC 0.3to0.6 ROHM : SMT6 EIAJ : SC-74 V mA mW 0.8 Unit V 0to0.1 Supply voltage 2.8 Limits 50 Symbol VCC 0.15 Parameter Each lead has same dimensions ∗ °C °C ∗200mW per element must not be exceeded. PNP type negative symbols have been omitted. zPackage, marking, and packaging specifications Part No. IMD14 Package Marking Code SMT6 D14 Basic ordering unit (pieces) 3000 T108 zEquivalent circuit R1 R2 R2 R1 zElectrical characteristics (Ta=25°C) Parameter Input voltage Output voltage Input current Output current DC current gain Transition frequency Input resistance Resistance ratio Symbol Min. Typ. Max. VI (off) VI (on) − 1.1 − − 0.3 − V Vcc=5V , IO=100µA VO=0.3V , IO=50mA VO (on) − − 0.3 V IO/II=100mA/5mA II − − − − mA µA 82 − − 250 17 0.5 − − − MHz R1 154 220 286 Ω R2/R1 36.3 45.5 54.6 − IO (off) GI ∗1 fT ∗2 Unit Conditions VI=3V Vcc=50V , VI=0V IO=100mA , VO=5V ∗1 ∗2 VCE=10V , IE=−50mA , f=100MHz − − ∗1 Measured using pulse current ∗2 Transition frequency of the device PNP type negative symbols have been omitted. Rev.A 1/3 IMD14 Transistors zElectrical characteristic curves DTr1(NPN) 10m 5m VO=0.3V OUTPUT CURRENT : Io (A) INPUT VOLTAGE : VI(on) (V) 50 20 10 5 Ta= −40°C 25°C 100°C 2 1 500m 200m 100m 0.5m 1m 2m 5m 10m 20m 50m 100m 200m 500m OUTPUT CURRENT : IO (A) Fig.1 Input voltage vs. Output current (ON characteristics) 1 1k VCC=5V 500 VO=5V 2m 1m 500µ DC CURRENT GAIN : GI 100 Ta=100°C 25°C −40°C 200µ 100µ 50µ 20µ 10µ 5µ 2µ 1µ 0 200 Ta=100°C 25°C −40°C 100 50 20 10 5 2 0.5 1 1.5 2 2.5 3 INPUT VOLTAGE : VI(off) (V) Fig.2 Output current vs. Input voltage (OFF characteristics) 1 0.5m 1m 2m 5m 10m 20m 50m 100m 200m 500m OUTPUT CURRENT : IO (A) Fig.3 DC current gain vs. Output current characteristics lO/lI=20 OUTPUT VOLTAGE : VO(on) (V) 500m 200m Ta=100°C 25°C −40°C 100m 50m 20m 10m 5m 2m 1m 0.5m 1m 2m 5m 10m 20m 50m 100m 200m 500m OUTPUT CURRENT : IO (A) Fig.4 Output voltage vs. Output current characteristics Rev.A 2/3 IMD14 Transistors DTr2(PNP) OUTPUT CURRENT : Io (A) INPUT VOLTAGE : VI(on) (V) −10m −5m VO= −0.3V −50 −20 −10 −5 Ta= −40°C 25°C 100°C −2 −1 −500m −200m −100m −0.5m −1m −2m −5m −10m −20m −50m −100m −200m −500m OUTPUT CURRENT : IO (A) −2m −1m −500µ Ta=100°C 25°C −40°C −200µ −100µ −50µ −20µ −10µ −5µ −2µ −1µ 0 VO= −5V 500 Ta=100°C 25°C −40°C 200 100 50 20 10 5 2 −0.5 −1 −1.5 −2 −2.5 −3 INPUT VOLTAGE : VI(off) (V) Fig.5 Input voltage vs. Output current (ON characteristics) 1 1k VCC= −5V DC CURRENT GAIN : GI −100 Fig.6 Output current vs. Input voltage (OFF characteristics) 1 −0.5m −1m −2m −5m −10m −20m −50m −100m −200m −500m OUTPUT CURRENT : IO (A) Fig.7 DC current gain vs. Output current characteristics lO/lI=20 OUTPUT VOLTAGE : VO(on) (V) 500m 200m Ta=100°C 25°C −40°C 100m 50m 20m 10m 5m 2m 1m −0.5m −1m −2m −5m −10m −20m −50m −100m −200m −500m OUTPUT CURRENT : IO (A) Fig.8 Output voltage vs. Output current characteristics Rev.A 3/3 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.1