IMS-5WD-40 Vishay Dale Inductors Miniature, Shielded FEATURES • Miniature shielded inductor • High inductance-to-size ratio RoHS • Inductance range is 0.10 µH to 180 000 µH COMPLIANT ELECTRICAL SPECIFICATIONS • Encapsulated non-flammable shielded unit Inductance Tolerance: ± 10 % on Q-Meter for 0.10 µH to 22 µH ± 5 % on 1KC Bridge for 27 µH to 1000 µH ± 10 % on 1KC Bridge for 1200 µH to 56 000 µH ± 20 % on 1KC Bridge measured at point on leads 1/4" [6.35 mm] from body for 68 000 µH to 180 000 µH • 0.164" [4.17 mm] diameter by 0.450" [11.43 mm] long envelope Dielectric Strength: 700 VRMS at sea level MECHANICAL SPECIFICATIONS Operating Temperature: - 55 °C to + 125 °C Terminal Strength: Meets 5 pound pull test Self-Resonant Frequency: Minimum SRF measured with full length leads on Grid-Dip Meter DENSITY SPECIFICATIONS Q: Measured on a Q-Meter Weight: 0.75 gram maximum Maximum Current: Based on temperature rise not to exceed 40 °C at + 85 °C ambient. Shielding: Less than 3 % coupling with two units mounted side by side at 1000 cycles • Offers extremely high inductance for density packaging DIMENSIONS in inches [millimeters] 1.30 [33.02] Typ. Min. #24 0.020 ± 0.002 [0.508 ± 0.051] TCW 0.450 [11.43] Max. 0.164 [4.17] Max. STANDARD ELECTRICAL SPECIFICATIONS TOL. Q MIN. TEST FREQ. Q (MHz) SELF-RESONANT FREQ. MIN. (MHz) DCR MAX. (Ohms) RATED DC CURRENT (mA) IMS-5WD-40 IMS-5WD-40 IMS-5WD-40 IMS-5WD-40 IMS-5WD-40 IMS-5WD-40 IMS-5WD-40 IMS-5WD-40 IMS-5WD-40 IMS-5WD-40 IMS-5WD-40 IMS-5WD-40 IMS-5WD-40 IMS-5WD-40 IMS-5WD-40 IMS-5WD-40 IMS-5WD-40 IMS-5WD-40 IMS-5WD-40 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 2.7 3.3 ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % 55 55 55 50 56 50 48 48 48 45 45 41 42 43 41 42 42 41 40 25 25 25 25 25 25 25 25 25 25 25 25 7.9 7.9 7.9 7.9 7.9 7.9 7.9 400 400 400 366 331 298 270 248 226 206 188 171 131 120 108 99 90 86 73 0.020 0.029 0.032 0.040 0.045 0.08 0.09 0.16 0.17 0.36 0.37 0.46 0.062 0.067 0.16 0.17 0.19 0.20 0.31 4000 3350 3000 2850 2700 2000 1900 1420 1400 960 940 870 2300 2200 1420 1370 1300 1270 1030 INCREMENTAL* CURRENT (mA) 4000 3350 3000 2850 2700 2000 1900 1420 1400 960 940 870 2300 2200 1420 1370 1300 1270 1030 PHENOLIC IND. (µH) IRON MODEL * Incremental Current: The DC current required to cause a 5 % reduction in the nominal inductance value www.vishay.com 26 For technical questions contact [email protected] Document Number: 34051 Revision: 10-Aug-06 IMS-5WD-40 Inductors, Miniature, Shielded Vishay Dale STANDARD ELECTRICAL SPECIFICATIONS MODEL IND. (µH) TOL. Q MIN. TEST FREQ. Q (MHz) SELF-RESONANT FREQ. MIN. (MHz) DCR MAX. (Ohms) RATED DC CURRENT (mA) IMS-5WD-40 IMS-5WD-40 IMS-5WD-40 IMS-5WD-40 IMS-5WD-40 IMS-5WD-40 IMS-5WD-40 IMS-5WD-40 IMS-5WD-40 IMS-5WD-40 IMS-5WD-40 IMS-5WD-40 IMS-5WD-40 IMS-5WD-40 IMS-5WD-40 IMS-5WD-40 IMS-5WD-40 IMS-5WD-40 IMS-5WD-40 IMS-5WD-40 IMS-5WD-40 IMS-5WD-40 IMS-5WD-40 IMS-5WD-40 IMS-5WD-40 IMS-5WD-40 IMS-5WD-40 IMS-5WD-40 IMS-5WD-40 IMS-5WD-40 IMS-5WD-40 IMS-5WD-40 IMS-5WD-40 IMS-5WD-40 IMS-5WD-40 IMS-5WD-40 IMS-5WD-40 IMS-5WD-40 IMS-5WD-40 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 1200 1500 1800 2200 2700 3300 3900 4700 5600 ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % 40 40 40 40 45 46 47 47 45 47 42 43 45 46 40 40 42 63 62 63 60 57 52 50 43 66 64 71 67 62 52 51 51 50 51 52 48 48 48 7.9 7.9 7.9 7.9 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 68 61 56 51 46 42 38 34 43 38 35 32 30 26 24 22 14 12 11 10 9.2 8.8 8.0 7.2 6.8 6.4 6.0 5.2 4.8 4.5 1.2 1.2 1.1 1.0 0.94 0.84 0.77 0.67 0.65 0.33 0.58 0.64 0.68 1.3 1.4 1.5 1.7 0.88 0.95 1.15 1.2 1.6 1.8 2.2 2.3 2.4 2.6 2.9 3.3 3.6 4.1 4.8 5.6 6.2 10.0 11.5 12.0 13.8 16.0 18.2 23.7 30.2 33.7 43.1 48.7 62.7 70.5 104 1000 750 710 680 500 480 460 440 610 590 530 520 450 420 390 375 360 345 330 315 300 280 260 240 230 180 170 160 150 140 135 118 105 99 87 82 72 68 56 INCREMENTAL* CURRENT (mA) FERRITE IRON 1000 750 710 680 500 480 460 440 235 220 200 193 183 177 170 165 160 157 145 126 110 105 91 87 72 67 65 60 55 52 50 48 42 37 33 30 29 28 24 * Incremental Current: The DC current required to cause a 5 % reduction in the nominal inductance value MARKING - Model - Inductance value - Tolerance - Date code ORDERING INFORMATION IMS-5WD-40 MODEL 0.10 µH INDUCTANCE VALUE 10 % INDUCTANCE TOLERANCE ER PACKAGE CODE e2 JEDEC LEAD (Pb)-FREE STANDARD GLOBAL PART NUMBER I M S 0 MODEL Document Number: 34051 Revision: 10-Aug-06 5 W D E R PACKAGE CODE R 1 0 INDUCTANCE VALUE For technical questions contact [email protected] K INDUCTANCE TOLERANCE 4 0 SERIES www.vishay.com 27 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1