LCD Switches Programmable LCD Switches IS Series Enhanced LED Illumination: » Broad and even light diffusion » Consistent backlighting » Low energy consumption Programmable LC Display Variety of LED Backlighting Rubber Dome Epoxy Sealed Straight PC Terminals IS15ABCP4CF IS15ABFP4RGB with Yellow LCD Mode with RGB LED Option and Black & White LCD Mode RGB backlighting provides infinite color availability. Programmable to display graphics, alphanumeric characters and animated sequences. Integrated liquid crystal display provides wide viewing angle with high contrast and clarity. Wide viewing area 15.0mm x 10.8mm (horizontal x vertical) at 36 x 24 pixels. Dome gives crisp tactile feedback to positively indicate circuit transfer. High reliability and long life of one million actuations minimum. Epoxy sealed terminals prevent entry of solder flux and other contaminants. Optional accessories available to enhance panel design and simplify production process. STANDARD LED BACKLIGHTING Part Number Switch Description LCD Mode IS15AACP4CF SPST Momentary ON Gold Contacts Straight PC Terminals Yellow STN Positive LED Color * Red/Green * Simultaneous illumination of both colors achieves third color. SUPER BRIGHT LED BACKLIGHTING LCD Switches Part Number Switch Description LCD Mode LED Color IS15ABCP4CF Yellow STN Positive Red/Green IS15ABCP4E Yellow STN Positive Yellow IS15ABCP4EF Yellow STN Positive Yellow/Green SPST Momentary ON Gold Contacts Straight PC Terminals Blue STN Negative Yellow IS15ABDP4EG Blue STN Negative Yellow/Blue IS15ABDP4B Blue STN Negative White IS15ABFP4B Black & White FSTN Positive White IS15ABDP4E * * * * Simultaneous illumination of both colors achieves third color. RGB LED BACKLIGHTING Part Number Switch Description LCD Mode IS15ABFP4RGB SPST Momentary ON Gold Contacts Straight PC Terminals Black & White FSTN Positive LED Color Red/Green/Blue * * Simultaneous RGB illumination achieves infinite colors. K01 [email protected] www.greatecs.com LCD Switches Programmable LCD Switches IS Series GENERAL SPECIFICATIONS OF SWITCH Circuit SPST normally open Electrical Capacity (Resistive Load) 100mA@12VDC Contact Resistance 200 milliohms max. @ 20 mV 10mA Insulation Resistance 100 megaohms min. @ 100VDC Dielectric Strength 125VAC for 1 minute min. Mechanical Endurance 1,000,000 operations min. Electrical Endurance 1,000,000 operations min. Operating Force 2.2 ± 0.5 Newtons Total Travel 1.8mm Operating Temperature Range 0°C ~ +40°; contact factory for wide temperature range options Storage Temperature Range -10°C ~ +60°C; contact factory for wide temperature range options GENERAL SPECIFICATIONS OF DISPLAY Display Operation Mode STN positive, STN negative, FSTN positive Display Condition Transflective with built-in LED backlight Viewing Angle Adjustable Driving Method 1/24 duty. 1/5 bias (built-in driving circuit) Viewing Area 15.0mm x 10.8mm (horizontal x vertical) Pixel Format 36 x 24 dots (horizontal x vertical) Pixel Size 0.36mm x 0.36mm (horizontal x vertical) Backlight LED Single color: yellow, white Bicolor: red/green, yellow/green, yellow/blue RGB: red/green/blue TYPICAL SWITCH DIMENSIONS WITH SINGLE OR BICOLOR LEDS 15.0 17.78 See Standoff Detail 14.01 Part No. 13 12 12.5 13.5 9.33 20.59 12.5 7.62 10.8 13x 0.8 ~ 1.0 Dia 17.78 13 11 9 2 8 6 4 7 5 3 4 17.78 12 10 7.62 1 17.78 3 0.6 Typ 16.0 10.5 23.13 2.5 3.2 12.5 2.8 1.25 Typ 12.7 1.25 Typ LCD Switches See Pixel Detail 2x 0.9 Dia Landless 2.5 2.5 12.7 Terminal numbers are not on the switch Footprint TYPICAL SWITCH DIMENSIONS WITH RGB LED See Pixel Detail 15.0 17.78 See Standoff Detail 14.01 Part No. 14 13.5 9.33 10.8 10 13.75 13.75 8 6 4 2 4 20.59 7.62 17.78 12 13 1 14x 0.8 ~ 1.0 Dia 17.78 14 13 2 11 9 7.62 7 1 5 3 1.25 Typ 2x 0.9 Dia Landless 0.6 Typ 16.0 10.5 23.13 PIXEL DETAIL 2.5 3.2 12.5 2.8 12.7 2.5 2.5 Terminal numbers are not on the switch 12.7 Footprint STANDOFF DETAIL 0.6 0.36 Sq 0.03 Typ 17.78 3 1.25 Typ 0.3 0.75 Dia 1.8 Dia [email protected] www.greatecs.com K02 LCD Switches Programmable LCD Switches IS Series OPTIONAL ACCESSORIES: AT9704-02YC SOCKET FOR SINGLE & BICOLOR LED MODELS Materials: Base - Glass Fiber Reinforced PBT Terminals - Brass/Beryllium Copper 13 11 9 12.5 7.62 20.5 7 12.5 0.51 DiaTyp 5 3 12 10 2 8 6 4 7.62 1 13x 0.8~ 1.0 Dia 1.25Typ 1.25 Typ 3.9 6.7 23.0 12.7 2.5 2.5 12.7 OPTIONAL ACCESSORIES: AT548 PANEL MOUNT HOUSING Materials: Polyamide Panel Thickness Range: 1.5 ~ 4.0 mm 23.7 31.5 27.5 29.0 12.6 23.2 2.0 27.6 17.7 23.7 OPTIONAL ACCESSORIES: AT542 COUPLER Material: PBT 1.0 1.0 16.0 4.2 16.0 LCD Switches 4.2 Top Side 0.97Typ Bottom DEMONSTRATION KIT Demonstration Kits 1 und 2 are shipped with a LCD Switch or LC Display, USB cable for PC connection, User Guide and CD with software. Optional Battery Box is available. IS-DEM KIT-1: Switch Demonstration Kit IS-DEM KIT-2: Display Demonstration Kit The demonstration kit is used for displaying bitmaps, up to 64, that have been created on your PC via the Easy Editor software and USB cable (supplied). This kit contains a LCD Switch or LC Display with red/green bicolor LED. IS-DEM KIT-1 IS-DEM KIT-2 DEVELOPMENT KIT All development kits have been preprogrammed and designed to work with software. IS-DEV KIT-1: One programmable LCD display module and two PCB mounted tact switches, with flash memory, power and programming connections. IS-DEV KIT-2: Two LCD programmable pushbutton switches on a PC board with flash memory, power and programming connections. IS-DEV KIT-1 K03 [email protected] IS-DEV KIT 2 This development kit consists of 2 LCD Switches with red/green bicolor LED. The kit is designed to show how 2 switches interact together to accomplish numerous tasks. www.greatecs.com