www.fairchildsemi.com KA79MXX 3-Terminal 0.5A Negative Voltage Regulator Features Description • • • • • • The KA79MXX series of 3-Terminal medium current negative voltage regulators are monolithic integrated circuits designed as fixed voltage regulators. These regulators employ internal current limiting, thermal shutdown and safe area compensation making them essentially indestructible. No external components required Output current in excess of 0.5A Internal thermal overload Internal short circuit current limiting Output transistor safe area compensation Output voltages of -5V,-6V,-8V, -12V,-15V,-18V,-24V TO-220 1 D-PAK 1 1. GND 2. Input 3. Output Schematic Diagram Rev. 1.0.0 ©2001 Fairchild Semiconductor Corporation KA79MXX Absolute Maximum Ratings Parameter Symbol Value Unit Input Voltage(for VO = -5V to -18V) (for VO = -24V) VI VI -35 -40 V V Thermal Resistance Junction-Cases RθJC 5 °C /W Thermal Resistance Junction-Air RθJA 65 °C /W Operating Temperature Range TOPR 0 ~ +125 °C Storage Temperature Range TSTG -65 ~ +125 °C Electrical Characteristics (KA79M05/KA79M05R) (Refer to test circuit, 0 °C ≤TJ ≤ +125 °C, lO =350mA, VI =-10V,unless otherwise specified, CI =0.33µF,CO=0.1µF) Parameter Output Voltage Symbol VO Conditions Min. Typ. Max. TJ= +25 °C -4.8 -5 -5.2 IO = 5mA to 350mA VI = -V7 to -25V -4.75 -5 -5.25 VI= -7V to -25V - 7.0 50 VI= -8V to -25V - 2.0 30 Unit V Line Regulation (Note1) ∆VO TJ =+25°C Load Regulation (Note1) ∆VO IO = 5mA to 500mA TJ = +25 °C - 30 100 mV TJ= +25 °C - 3.0 6.0 mA IO = 5mA to 350mA - - 0.4 IO = 200mA VI = -8V to -25V - - 0.4 IO = 5mA - -0.2 - mV/ °C - 40 - µV 54 60 - dB Quiescent Current Quiescent Current Change Output Voltage Drift IQ ∆IQ ∆Vo/∆T mV mA Output Noise Voltage VN f = 10Hz, 100KHz TA = +25 °C Ripple Rejection RR f = 120Hz VJ= -8Vto -18V Dropout Voltage VD TJ =+25 °C, IO = 500mA - 1.1 - V Short Circuit Current ISC TJ= +25 °C, VI = -35V - 140 - mA Peak Current IPK TJ= +25 °C - 650 - mA Note: 1. Load and line regulation are specified at constant junction temperature. Change in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. 2 KA79MXX Electrical Characteristics (KA79M06) (Refer to test circuit, 0 °C ≤TJ ≤ +125 °C, lO =350mA, VI = -11V,unless otherwise specified) Parameter Symbol Conditions TJ= +25 °C Output Voltage VO IO = 5mA to 350mA VI = -8.0V to -25V Min. Typ. Max. - 5.75 - 6.0 - 6.25 V - 5.7 - 6.0 - 6.3 VI = -8Vto -25V - 7.0 60 VI = -9V to -19V - 2.0 40 IO = 5.0mA to 500mA - 30 120 mV mA Line Regulation (Note1) ∆VO TJ =+25°C Load Regulation (Note1) ∆VO TJ= +25 °C IQ TJ= +25 °C - 3 6 Quiescent Current Quiescent Current Change Output Voltage Drift ∆IQ ∆VO/∆T Unit mV IO = 5mA to 350mA - - 0.4 VI = -8V to -25V - - 0.4 mA IO = 5mA - 0.4 - mV/ °C - 50 - µV 54 60 - dB Output Noise Voltage VN f = 10Hz to 100KHz,TA = +25 °C Ripple Rejection RR f = 120Hz,VI = -9V to -19V Dropout Voltage VD IO = 500mA, TJ = +25 °C - 1.1 - V Short Circuit Current ISC VI = -35V, TJ = +25 °C - 140 - mA Peak Current IPK TJ= +25 °C - 650 - mA Note: 1. Load and line regulation are specified at constant junction temperature. Change in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. 3 KA79MXX Electrical Characteristics (KA79M08/KA79M08R) (Refer to test circuit, 0 °C ≤TJ ≤ +125 °C, lO =350mA, VI = -14V,unless otherwise specified) Parameter Symbol Conditions TJ= +25 °C Output Voltage VO IO = 5mA to 350mA VI = -10.5V to -25V Min. Typ. Max. - 7.7 - 8.0 - 8.3 Unit V - 7.6 - 8.0 - 8.4 VI = -10.5V to -25V - 7.0 80 VI = -11V to -21V - 2.0 50 IO = 5.0mA to 500mA - 30 160 mV mA Line Regulation (Note1) ∆VO TJ =+25°C Load Regulation (Note1) ∆VO TJ= +25 °C IQ TJ= +25 °C - 3 6 IO = 5mA to 350mA - - 0.4 VI = -8V to -25V - - 0.4 mA IO = 5mA - -0.6 - mV/ °C - 60 - µV 54 59 - dB Quiescent Current Quiescent Current Change Output Voltage Drift ∆IQ ∆VO/∆T mV Output Noise Voltage VN f = 10Hz to 100KHz,TA = +25 °C Ripple Rejection RR f = 120Hz,VI = -9V to -19V Dropout Voltage VD IO = 500mA, TJ = +25 °C - 1.1 - V Short Circuit Current ISC VI = -35V, TJ = +25 °C - 140 - mA Peak Current IPK TJ = +25 °C - 650 - mA Note: 1. Load and line regulation are specified at constant junction temperature. Change in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. 4 KA79MXX Electrical Characteristics (KA79M12) (Refer to test circuit, 0 °C ≤TJ ≤ +125 °C, lO =350mA, VI = -19V,unless otherwise specified) Parameter Symbol Conditions TJ= +25 °C Output Voltage VO IO = 5mA to 350mA VI = -14.5V to -30V Min. Typ. Max. -11.5 -12 -12.5 V -11.4 -12 -12.6 VI = -14.5V to -30V - 8.0 80 VI = -15V to -25V - 3.0 50 IO = 5.0mA to 500mA - 30 240 mV mA Line Regulation (Note1) ∆VO TJ =+25°C Load Regulation (Note1) ∆VO TJ= +25 °C IQ TJ= +25 °C - 3 6 Quiescent Current Quiescent Current Change Output Voltage Drift ∆IQ ∆VO/∆T Unit mV IO = 5mA to 350mA - - 0.4 VI = -14.5V to -30V - - 0.4 mA IO = 5mA - -0.8 - mV/ °C - 75 - µV 54 60 - dB Output Noise Voltage VN f = 10Hz to 100KHz,TA =+25 °C Ripple Rejection RR f = 120Hz,VI = -15V to -25V Dropout Voltage VD IO = 500mA, TJ = +25 °C - 1.1 - V Short Circuit Current ISC VI = -35V, TJ = +25 °C - 140 - mA Peak Current IPK TJ= +25 °C - 650 - mA Note: 1. Load and line regulation are specified at constant junction temperature. Change in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. 5 KA79MXX Electrical Characteristics (KA79M15) (Refer to test circuit, 0 °C ≤TJ ≤ +125 °C, lO =350mA, VI = -23V,unless otherwise specified) Parameter Output Voltage Symbol VO Conditions Min. Typ. Max. TJ= +25 °C - 14.4 - 15 - 15.6 IO = 5mA to 350mA VI = -17.5V to -30V -14.25 - 15 -15.75 VI = -17.5Vto -30V - 9.0 80 VI = -18V to -28V - 5.0 50 IO = 5.0mA to 500mA - 30 240 mV mA Line Regulation (Note1) ∆VO TJ =+25°C Load Regulation (Note1) ∆VO TJ= +25 °C IQ TJ= +25 °C - 3 6 Quiescent Current Quiescent Current Change Output Voltage Drift ∆IQ ∆VO/∆T Unit V mV IO = 5mA to 350mA - - 0.4 VI = -17.5V to -28V - - 0.4 mA IO = 5mA - -1.0 - mV/ °C Output Noise Voltage VN f = 10Hz to 100KHz,TA = +25 °C - 90 - µV Ripple Rejection RR f = 120Hz,VI = -18.5V to -28.5V 54 59 - dB Dropout Voltage VD IO = 500mA, TJ = +25 °C - 1.1 - V Short Circuit Current ISC VI = -35V, TJ = +25 °C - 140 - mA Peak Current IPK TJ= +25 °C - 650 - mA Note: 1. Load and line regulation are specified at constant junction temperature. Change in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. 6 KA79MXX Electrical Characteristics (KA79M18) (Refer to test circuit, 0 °C ≤TJ ≤ +125 °C, lO =350mA, VI = -27V,unless otherwise specified) Parameter Output Voltage Symbol VO Conditions Min. Typ. Max. TJ= +25 °C - 17.3 - 18 - 18.7 IO = 5mA to 350mA VI = -21V to -33V - 17.1 - 18 - 18.9 VI = -21V to -33V - 9.0 80 VI = -24V to -30V - 5.0 80 IO = 5.0mA to 500mA - 30 360 mV mA Line Regulation (Note1) ∆VO TJ =+25°C Load Regulation (Note1) ∆VO TJ= +25 °C IQ TJ= +25 °C - 3 6 Quiescent Current Quiescent Current Change Output Voltage Drift ∆IQ ∆VO/∆T Unit V mV IO = 5mA to 350mA - - 0.4 VI = -21V to -33V - - 0.4 mA IO = 5mA - -1.0 - mV/ °C - 110 - µV 54 59 - dB Output Noise Voltage VN f = 10Hz to 100KHz,TA = +25 °C Ripple Rejection RR f = 120Hz,VI = -22V to -32V Dropout Voltage VD IO = 500mA, TJ = +25 °C - 1.1 - V Short Circuit Current ISC VI = -35V, TJ = +25 °C - 140 - mA Peak Current IPK TJ= +25 °C - 650 - mA Note; 1. Load and line regulation are specified at constant junction temperature. Change in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. 7 KA79MXX Electrical Characteristics (KA79M24) (Refer to test circuit, 0 °C ≤TJ ≤ +125 °C, lO =350mA, VI = -33V,unless otherwise specified) Parameter Symbol Conditions Min. Typ. Max. - 23 - 24 - 25 - 22.8 - 24 - 25.2 VI = -27V to -38V - 9.0 80 VI = -30V to -36V - 5.0 70 IO = 5.0mA to 500mA - 30 300 mV mA TJ= +25 °C Output Voltage VO IO = 5mA to 350mA VI = -27V to -38V Unit V Line Regulation (Note1) ∆VO TJ =+25°C Load Regulation (Note1) ∆VO TJ= +25 °C IQ TJ= +25 °C - 3 6 IO = 5mA to 350mA - - 0.4 VI = -27V to -38V - - 0.4 mA IO = 5mA - -1.0 - mV/ °C - 180 - µV 54 58 - dB Quiescent Current Quiescent Current Change Output Voltage Drift ∆IQ ∆VO/∆T mV Output Noise Voltage VN f = 10Hz to 100KHz,TA = +25 °C Ripple Rejection RR f = 120Hz,VI = -28V to -38V Dropout Voltage VD IO = 500mA, TJ = +25 °C - 1.1 - V Short Circuit Current ISC VI = -35V, TJ = +25 °C - 140 - mA Peak Current IPK TJ= +25 °C - 650 - mA Note: 1. Load and line regulation are specified at constant junction temperature. Change in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. 8 KA79MXX Typical Applications Figure 1. Fixed Output Regulator Figure 2. Variable Output Notes: 1. Required for stability. For value given, capacitor must be solid tantalum. 25µF aluminum electrolytic may be substituted. 2. C2 improves transient response and ripple rejection. Do not increase beyond 50µF. 9 KA79MXX Mechanical Dimensions Package Dimensions in millimeters TO-220 4.50 ±0.20 2.80 ±0.10 (3.00) +0.10 1.30 –0.05 18.95MAX. (3.70) ø3.60 ±0.10 15.90 ±0.20 1.30 ±0.10 (8.70) (1.46) 9.20 ±0.20 (1.70) 9.90 ±0.20 (45° 1.52 ±0.10 0.80 ±0.10 2.54TYP [2.54 ±0.20] 2.54TYP [2.54 ±0.20] 10.00 ±0.20 10 10.08 ±0.30 (1.00) 13.08 ±0.20 ) 1.27 ±0.10 +0.10 0.50 –0.05 2.40 ±0.20 KA79MXX Mechanical Dimensions (Continued) Package Dimensions in millimeters D-PAK 0.89 ±0.10 MIN0.55 0.91 ±0.10 0.50 ±0.10 9.50 ±0.30 0.76 ±0.10 0.50 ±0.10 1.02 ±0.20 2.30TYP [2.30±0.20] (1.00) (3.05) (2XR0.25) (0.10) 6.60 ±0.20 (5.34) (5.04) (1.50) (0.70) 2.30 ±0.20 (0.90) 2.70 ±0.20 2.30 ±0.10 2.70 ±0.20 2.30TYP [2.30±0.20] (0.50) 6.10 ±0.20 MAX0.96 (4.34) 9.50 ±0.30 0.80 ±0.20 0.60 ±0.20 (0.50) 6.10 ±0.20 5.34 ±0.30 0.70 ±0.20 6.60 ±0.20 0.76 ±0.10 11 KA79MXX Ordering Information Product Number Package Operating Temperature KA79M05 KA79M06 KA79M08 KA79M12 TO-220 KA79M15 0 ~ + 125°C KA79M18 KA79M24 KA79M05R KA79M08R KA79M12R 12 D-PAK KA79MXX 13 KA79MXX DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com 6/11/01 0.0m 001 Stock#DSxxxxxxxx 2001 Fairchild Semiconductor Corporation