PHOTOCOUPLER Part Number: KB837 GENERAL PURPOSE HIGH ISOLATION VOLTAGE SINGLE TRANSISTOR TYPE PHOTOCOUPLER SERIES FEATURES 1.High isolation voltage between input and output (Viso=5000 Vrms). 2.Compact dual-in-line package KB837:3-channel type 3.Recognized by UL and CUL, file NO.E225308. 4.Approved by VDE 0884 Teil2(NO:40006364) (Creepage distance between input and output:7mm or more). 5.RoHS Compliant. DESCRIPTION 1.The KB837 (3-channel) is optically coupled isolators containing a GaAS light emitting diode and an NPN silicon phototransistor. 2.The lead pitch is 2.54mm. 3.Solid insulation thickness between emitting diode and output phototransistor:>=0.6mm. APPLICATIONS 1.Computer terminals. 2.Registers,copiers,automatic vending machines. 3.System appliances, measuring instruments. 4.Programmable logic controller. 5.Signal transmission between circuits of different potentials and impedances. SPEC NO: DSAI0536 REV NO: V.1 DATE: JAN/16/2008 PAGE: 1 OF 9 APPROVED: WYNEC CHECKED: Tracy Deng DRAWN: R.CHEN ERP: 1205000020 PHOTOCOUPLER Part Number: KB837 *PACKAGE DIMENSIONS (UNIT:mm) DIP Type TOLERANCE : ±0.5[±0.02] UNLESS OTHERWISE NOTED. KB837 Top View Internal connection diagram *Absolute Maximum Ratings (Ta=25°C) Symbol Rating Unit Forward current IF 50 mA Reverse voltage VR 6 V Power dissipation P 70 mW Collector-emitter voltage VC E O 35 V Emitter-collector voltage VE C O 6 V Collector current IC 50 mA Collector power dissipation PC 150 mW Total power dissipation Ptot 200 mW *1 Viso 5000 Vrms Operating temperature Topr -30~+100 °C Storage temperature Tstg -55~+125 °C *2 Tsol 260 °C Parameter Input Output Isolation voltage Soldering temperature *1 40 to 60% RH,AC for 1 minute. *2 For 10 seconds. SPEC NO: DSAI0536 REV NO: V.1 DATE: JAN/16/2008 PAGE: 2 OF 9 APPROVED: WYNEC CHECKED: Tracy Deng DRAWN: R.CHEN ERP: 1205000020 PHOTOCOUPLER Part Number: KB837 *Electro-optical Characteristics Parameter Input Symbol Conditions Min. Typ. Max. Unit Forward voltage VF I F =20mA ___ 1.2 1.4 V Peak forward voltage VFM I FM=0.5A ___ ___ 3.0 V IR VR=4V ___ ___ 10 μA ICEO VCE =20V,I F =0mA ___ ___ 10-7 A nA CTR I F =5mA,VCE=5V 50 ___ 600 % VCE(sat) I F =20mA, I C =1mA ___ 0.1 0.2 V fc V CE=5V, IC=2mA RL=100Ω,-3dB ___ 80 ___ KHz ___ 4 18 μs ___ 3 18 μs Reverse current Output Collector dark current *1Current Transfer characteristics transfer ratio Collector-emitter saturation voltage C ut-o ff fre q ue ncy Rise time tr Fall time tf Response time V CE=2V, IC=2mA RL=100Ω Classification table of current transfer ratio is shown below. Ic CTR= I F X 100% SPEC NO: DSAI0536 REV NO: V.1 DATE: JAN/16/2008 PAGE: 3 OF 9 APPROVED: WYNEC CHECKED: Tracy Deng DRAWN: R.CHEN ERP: 1205000020 PHOTOCOUPLER Part Number: KB837 Fig. 1 Current Transfer Ratio vs. Forward Current Fig. 2 Forward Current vs. Forward voltage Fig. 3 Collector Current vs. Collector-emitter Voltage Fig. 4 Relative Current Transfer Ratio vs. Ambient Temperature Fig. 5 Collector-emitter Saturation Voltage vs. Ambient Temperature Fig. 6 Collector Dark Current vs. Ambient Temperature SPEC NO: DSAI0536 REV NO: V.1 DATE: JAN/16/2008 PAGE: 4 OF 9 APPROVED: WYNEC CHECKED: Tracy Deng DRAWN: R.CHEN ERP: 1205000020 PHOTOCOUPLER Part Number: KB837 Fig. 7 Forward Current vs. Ambient Temperature Test Circuit for Response Time μ Fig. 9 Response Time vs. Load Resistance Fig. 8 Collector Power Dissipation vs. Ambient Temperature Ω Fig. 10 Frequency Response Test Circuit for Frequency Response Ω Ω Ω SPEC NO: DSAI0536 REV NO: V.1 DATE: JAN/16/2008 PAGE: 5 OF 9 APPROVED: WYNEC CHECKED: Tracy Deng DRAWN: R.CHEN ERP: 1205000020 PHOTOCOUPLER Part Number: KB837 Fig. 11 Collector-emitter Saturation Voltage vs. Forward Current *NOTES ON HANDLING 1.Recommended soldering conditions (Dip soldering) (1) Dip soldering Temperature 260 °C or below (molten solder temperature) Time Less than 10 seconds. Cycle One cycle allowed to be dipped in solder including plastic mold portion. Flux Rosin flux containing small amount of chorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) (2) Cautions Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2.Cautions regarding noise Be aware that power is suddenly into the componment any surge current may cause damage happen, even if the voltage is within the absolute maximum ratings. SPEC NO: DSAI0536 REV NO: V.1 DATE: JAN/16/2008 PAGE: 6 OF 9 APPROVED: WYNEC CHECKED: Tracy Deng DRAWN: R.CHEN ERP: 1205000020 PHOTOCOUPLER Part Number: KB837 CAUTION Within this device there exists GaAs (Gallium Arsenide) material which is a harmful substance if ingested. GaAs dust and fumes are toxic. Do not break, cut or pulverize the product, or use chemicals to dissolve them. RESTRICTIONS ON PRODUCT USE The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all devices / types available in every country. We are mention about our product quality stablity, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing KINGBRIGHT products, to observe standards of safety, and to a avoid situations in which a malfunction or failure of a KINGBRIGHT product could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that KINGBRIGHT products are used within specified operating ranges as set forth in the most recent products specifications. SPEC NO: DSAI0536 REV NO: V.1 DATE: JAN/16/2008 PAGE: 7 OF 9 APPROVED: WYNEC CHECKED: Tracy Deng DRAWN: R.CHEN ERP: 1205000020 PHOTOCOUPLER Part Number: KB837 TOLERANCE : ±0.4[±0.012] UNLESS OTHERWISE NOTED. Dimension of Tube Unit:mm Dimension of Carton *ORDERING INFORMATION Part Number Package Package Style KB837 12-pin DIP 30pcs/each tube SPEC NO: DSAI0536 REV NO: V.1 DATE: JAN/16/2008 PAGE: 8 OF 9 APPROVED: WYNEC CHECKED: Tracy Deng DRAWN: R.CHEN ERP: 1205000020 PHOTOCOUPLER Part Number: KB837 PACKING & LABEL SPECIFICATIONS KB837 SPEC NO: DSAI0536 REV NO: V.1 DATE: JAN/16/2008 PAGE: 9 OF 9 APPROVED: WYNEC CHECKED: Tracy Deng DRAWN: R.CHEN ERP: 1205000020