Surface Mount Inductor Schematic Diagram Toroid Mount meets UL94VO Designed for IR and Vapor Phase Reflow The Inductor is a dual winding and can be used as a dual inductor, single inductor, or a transformer. Single inductors can be wired in series for high inductance values or wired in parallel for less inductance but twice the current capacity. As a 1:1 transformer, it can provide a minimum of 500 volts isolation with good frequency response. For series operation Connect 2 & 4 For parallel operation Connect 1 & 4 and 2 & 3 Electrical Specifications at 25o C Part Number --- Parallel Ratings --L DCR I + 30% Max. Max. ( µH ) ( mΩ ) ADC L-15107 50 180 1.02 --- Series Ratings --L DCR I + 30% Max. Max. ( µH ) ( mΩ ) ADC 200 720 0.51 Energy Typ. ( µJ ) 23 Physical Dimensions in inches (mm) 2 3 1 4 RHOMBUS P/N: L-15107 CUST P/N: DATE: 5/29/98 NAME: SHEET: 1 OF 1 15801 Chemical Lane, Huntington Beach, CA 92649 Phone: (714) 898-0960 FAX: (714) 896-0971 Rhombus Industries Inc. Transformers & Magnetic Products www.rhombus-ind.com