TAIYO-YUDEN LBR2518T470

Notice for TAIYO YUDEN products Please read this notice before using the TAIYO YUDEN products.
REMINDERS
■ Product information in this catalog is as of October 2009. All of the contents specified herein are subject to change
without notice due to technical improvements, etc. Therefore, please check for the latest information carefully before practical application or usage of the Products.
Please note that Taiyo Yuden Co., Ltd. shall not be responsible for any defects in products or equipment incorporating such products, which are caused under the conditions other than those specified in this catalog or individual
specification.
■ Please contact Taiyo Yuden Co., Ltd. for further details of product specifications as the individual specification is
available.
■ Please conduct validation and verification of products in actual condition of mounting and operating environment
before commercial shipment of the equipment.
■ All electronic components or functional modules listed in this catalog are developed, designed and intended for
use in general electronics equipment.(for AV, office automation, household, office supply, information service,
telecommunications, (such as mobile phone or PC) etc.). Before incorporating the components or devices into any
equipment in the field such as transportation,( automotive control, train control, ship control), transportation signal,
disaster prevention, medical, public information network (telephone exchange, base station) etc. which may have
direct influence to harm or injure a human body, please contact Taiyo Yuden Co., Ltd. for more detail in advance.
Do not incorporate the products into any equipment in fields such as aerospace, aviation, nuclear control, submarine system, military, etc. where higher safety and reliability are especially required.
In addition, even electronic components or functional modules that are used for the general electronic equipment,
if the equipment or the electric circuit require high safety or reliability function or performances, a sufficient reliability evaluation check for safety shall be performed before commercial shipment and moreover, due consideration to
install a protective circuit is strongly recommended at customer's design stage.
■ The contents of this catalog are applicable to the products which are purchased from our sales offices or distributors (so called“TAIYO YUDEN’
s official sales channel”
).
It is only applicable to the products purchased from any of TAIYO YUDEN’s official sales channel.
■ Please note that Taiyo Yuden Co., Ltd. shall have no responsibility for any controversies or disputes that may occur in connection with a third party's intellectual property rights and other related rights arising from your usage of
products in this catalog. Taiyo Yuden Co., Ltd. grants no license for such rights.
■ Caution for export
Certain items in this catalog may require specific procedures for export according to“Foreign Exchange and Foreign Trade Control Law”of Japan,“U.S. Export Administration Regulations”, and other applicable regulations.
Should you have any question or inquiry on this matter, please contact our sales staff.
Should you have any question or inquiry on this matter, please contact our sales staff.
1
notice_e-01
WOUND CHIP INDUCTORS (LB SERIES)
REFLOW
■ FEATURES
■ APPLICATIONS
Wound Chip Inductors cover customers' wide range module designs by
wide-line-up shape, standard, low Rdc, and high electric current series.
◦DSC/DVC/HDD, LCD, portable telephones, game equipments.
Various audio-visual equipments, various communication equipments,
etc.
◦LB/LBR Series：Super low Rdc and high Idc characteristics.
◦LB3218 Series ： This series is downsized from 3225 size. Land pattern can be used by 3225 size.
◦LBMF1608
The best efficiency design is achieved by adopting bottom-surface electrode structure. Because of 1608 shape, it can be high-density mounting.
■ ORDERING CODE
B △
L
❶
LB
2
MF
1
❷
2
T
❸
❶Type
Wound chip inductor
△
C
R
0
0
❹
❸External Dimensions
〔mm〕
1608
（0603） 1.6×0.8
2012
（0805） 2.0×1.25
2016
（0806） 2.0×1.6
（1007） 2.5×1.8
2518
（1207） 3.2×1.8
3218
（1210） 3.2×1.5
3225
❷Shape
Standard products
High current
Low Rdc
Bottom-surface
electrode
1
T
❹Packaging
Tape & Reel
△ △ △ △ △
0
❺
❻
❺Nominal
Inductance〔μH〕
example
1R0
1
100
10
101
100
※R=decimal point
❼
❻Inductance
Tolerances〔％〕
K
±10
M
±20
❽
❼Special
code
Standard
△
products
Low Rdc
R
type
❽Internal code
Standard
Products
△＝Blank space
△△△
■ EXTERNAL DIMENSIONS/STANDARD QUANTITY
EXTERNAL DIMENSIONS
Type
C
A
TYPE
1608
MF1608
2012
2016
2518
3218
3225
A
0.55
0.55
0.7
0.7
0.8
1.0
1.0
B
0.7
0.8
0.8
0.8
1.2
1.6
1.6
Unit：mm
C
1.0
0.9
1.45
1.8
2.0
2.0
2.0
B
L
T
Standard Quantity [pcs]
Paper
Embossed
Tape
Tape
e
LBC3225
3.2±0.2
2.5±0.2
2.5±0.2
0.6±0.3
（0.128±0.008） （0.098±0.008） （0.098±0.008） （0.024±0.012）
－
1000
LB3218
3.2±0.2
1.8±0.2
1.8±0.2
0.6±0.2
（0.128±0.008） （0.071±0.008） （0.071±0.008） （0.024±0.008）
－
2000
LB2518
LBC2518
LBR2518
2.5±0.2
1.8±0.2
1.8±0.2
0.5±0.2
（0.098±0.008） （0.071±0.008） （0.071±0.008） （0.020±0.008）
－
2000
LB2016
LBC2016
2.0±0.2
1.6±0.2
1.6±0.2
0.5±0.2
（0.079±0.008） （0.063±0.008） （0.063±0.008） （0.020±0.008）
－
2000
LB2012
LBC2012
LBR2012
2.0±0.2
1.25±0.2
1.25±0.2
0.5±0.2
（0.079±0.008） （0.049±0.008） （0.049±0.008） （0.020±0.008）
－
2000
LB1608
1.6±0.1
0.8±0.1
0.8±0.1
0.35±0.15
（0.063±0.004） （0.031±0.004） （0.031±0.004） （0.014±0.006）
4000
－
LBMF1608
1.6±0.2
0.8±0.2
0.8±0.2
0.45±0.15
（0.063±0.008） （0.031±0.008） （0.031±0.008） （0.016±0.006）
－
A
Surface Mounting
・ Mounting and soldering conditions should be checked
beforehand.
・ Applicable soldering process
to those products is reflow
soldering only.
・ Recommended Land Patterns
W
3000
Unit：mm
（inch）
■ AVAILABLE CAPACITANCE RANGE
Type
Range
LB3218
LB2518
LB2016
LB2012
LB1608
LBC3225
LBC2518
LBC2016
LBC2012
LBR2518
LBR2012
LBMF1608
Imax.［mA］　Rdc±30％［Ω］ Imax.［mA］　Rdc±30％［Ω］ Imax.［mA］　Rdc±30％［Ω］ Imax.［mA］　Rdc±30％［Ω］ Imax.［mA］　Rdc±30％［Ω］ Imax.［mA］　Rdc±30％［Ω］ Imax.［mA］　Rdc±30％［Ω］ Imax.［mA］　Rdc±30％［Ω］ Imax.［mA］　Rdc±30％［Ω］ Imax.［mA］　Rdc±30％［Ω］ Imax.［mA］　Rdc±30％［Ω］ Imax.［mA］　Rdc±30％［Ω］
Inductance［μH］
1
1075 1μH 0.06 665 1μH 0.06 490 1μH 0.09 405 1μH 0.15 160 1μH 0.17 1100 1μH 0.055 775 1μH 0.08 690 1μH
70
10
100
1000
340
0.25 165
0.25 155
0.5
120
0.7
0.1
60
0.7
540
0.133 375
0.36 245
0.82 200
1.2
90
5.8
10μH
140
2.40
40
27
1000μH
60
2.1
15
24
1000μH
40
4.5
100μH
45
7.0
100μH
620 1μH 0.19 960 1μH 0.045 400 1μH 0.07 230 1μH 0.09
0.55
150
1.4
100μH
125
3.70
680μ
45 H 28.0
75
8.0
100μH
47μH
235
0.19 150
0.36
80
0.36
35
80
1.89
100μH
50
4.0
100μH
2.5
47μH
680μH
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
42
1
wound01_e-01
■ PART NUMBERS
●LB1608 TYPE
Ordering code
LB 1608T1R0M
LB 1608T2R2M
LB 1608T4R7M
LB 1608T8R2M
LB 1608T100M
EHS
（Environmental
Hazardous
Substances）
RoHS
RoHS
RoHS
RoHS
RoHS
Inductance
Tolerance
Self-resonant frequency
〔MHz〕min.
DC
Resistance
〔Ω〕
（±30％）
Rated current
〔mA〕max.
1.0
2.2
4.7
8.2
10
±20%
100
80
45
32
32
0.17
0.33
0.55
0.70
0.70
160
115
70
60
60
Inductance
〔μH〕
Inductance
Tolerance
Self-resonant frequency
〔MHz〕min.
DC
Resistance
〔Ω〕
（±30％）
Rated current
〔mA〕max.
100
80
55
45
38
32
32
28
16
11
10
8
0.15
0.23
0.30
0.40
0.47
0.70
0.50
1.3
1.7
3.7
6.0
7.0
405
260
235
190
135
120
120
100
80
60
50
45
Self-resonant frequency
〔MHz〕min.
DC
Resistance
〔Ω〕
（±30％）
Rated current
〔mA〕max.
100
80
70
55
45
38
32
28
16
14
11
10
8
0.09
0.11
0.13
0.20
0.25
0.35
0.50
0.70
1.0
1.7
2.4
3.0
4.5
490
380
375
285
225
200
155
130
105
85
70
55
40
Self-resonant frequency
〔MHz〕min.
DC
Resistance
〔Ω〕
（±30％）
Rated current
〔mA〕max.
100
80
68
54
46
46
38
30
23
19
15
12
9.5
9.0
7.0
5.5
4.5
3.5
3.0
2.4
0.06
0.07
0.09
0.11
0.13
0.10
0.15
0.25
0.32
0.50
0.70
0.95
1.5
2.1
3.2
4.5
7.0
10
17
24
665
405
340
280
240
235
195
165
145
115
95
85
70
60
45
40
30
25
20
15
Inductance
〔μH〕
Measuring
frequency
〔MHz〕
7.96
2.52
●LB2012 TYPE
Ordering code
1.0
2.2
3.3
4.7
6.8
10
10
15
22
47
68
100
±20%
±10%
±20%
Measuring
frequency
〔MHz〕
7.96
2.52
0.796
●LB2016 TYPE
Ordering code
LB 2016T1R0M
LB 2016T1R5M
LB 2016T2R2M
LB 2016T3R3M
LB 2016T4R7M
LB 2016T6R8M
LB 2016T100□
LB 2016T150□
LB 2016T220□
LB 2016T330□
LB 2016T470□
LB 2016T680□
LB 2016T101□
EHS
（Environmental
Hazardous
Substances）
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Inductance
〔μH〕
1.0
1.5
2.2
3.3
4.7
6.8
10
15
22
33
47
68
100
Inductance
Tolerance
±20%
±10%
±20%
FERRITE PRODUCTS
LB 2012T1R0M
LB 2012T2R2M
LB 2012T3R3M
LB 2012T4R7M
LB 2012T6R8M
LB 2012T100□
LB 2012T100□R
LB 2012T150□
LB 2012T220□
LB 2012T470□
LB 2012T680□
LB 2012T101□
EHS
（Environmental
Hazardous
Substances）
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Measuring
frequency
〔MHz〕
7.96
2.52
0.796
●LB2518 TYPE
EHS
（Environmental
Hazardous
Substances）
LB 2518T1R0M
RoHS
LB 2518T1R5M
RoHS
LB 2518T2R2M
RoHS
LB 2518T3R3M
RoHS
LB 2518T4R7M
RoHS
LB 2518T4R7MR
RoHS
LB 2518T6R8M
RoHS
LB 2518T100□
RoHS
LB 2518T150□
RoHS
LB 2518T220□
RoHS
LB 2518T330□
RoHS
LB 2518T470□
RoHS
LB 2518T680□
RoHS
LB 2518T101□
RoHS
LB 2518T151□
RoHS
LB 2518T221□
RoHS
LB 2518T331□
RoHS
LB 2518T471□
RoHS
LB 2518T681□
RoHS
LB 2518T102□
RoHS
・□Please specify the Inductance tolerance code
（K or M）
Ordering code
Inductance
〔μH〕
1.0
1.5
2.2
3.3
4.7
4.7
6.8
10
15
22
33
47
68
100
150
220
330
470
680
1000
Inductance
Tolerance
±20%
±10%
±20%
Measuring
frequency
〔MHz〕
7.96
2.52
0.796
0.252
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound01_e-01
1
43
■ PART NUMBERS
●LB3218 TYPE
Ordering code
LB 3218T1R0M
LB 3218T1R5M
LB 3218T2R2M
LB 3218T3R3M
LB 3218T4R7M
LB 3218T6R8M
LB 3218T100□
LB 3218T150□
LB 3218T220□
LB 3218T330□
LB 3218T470□
LB 3218T680□
LB 3218T101□
LB 3218T151□
LB 3218T221□
LB 3218T331□
LB 3218T471□
LB 3218T681□
LB 3218T102□
EHS
（Environmental
Hazardous
Substances）
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Inductance
〔μH〕
1.0
1.5
2.2
3.3
4.7
6.8
10
15
22
33
47
68
100
150
220
330
470
680
1000
Inductance
Tolerance
Measuring
frequency
〔MHz〕
Self-resonant frequency
〔MHz〕min.
DC
Resistance
〔Ω〕
（±30％）
Rated current
〔mA〕max.
100
80
68
54
41
40
30
25
19
15
12
11
8.0
7.0
5.0
4.0
3.5
3.0
2.4
0.06
0.07
0.09
0.11
0.13
0.17
0.25
0.32
0.49
0.75
0.92
1.49
2.4
3.2
5.4
7.0
14
17
27
1075
860
775
560
550
380
340
300
255
215
205
145
140
105
80
65
54
45
39
Self-resonant frequency
〔MHz〕min.
DC
Resistance
〔Ω〕
（±30％）
Rated current
〔mA〕max.
100
80
60
45
32
16
11
0.09
0.17
0.22
0.24
0.36
1.0
2.5
230
160
130
110
80
50
35
Self-resonant frequency
〔MHz〕min.
DC
Resistance
〔Ω〕
（±30％）
Rated current
〔mA〕max.
Measuring
frequency
〔MHz〕
250
220
190
160
70
50
23
20
17
13
10
8
6
0.055
0.060
0.080
0.095
0.100
0.120
0.133
0.195
0.270
0.410
0.670
1.00
1.40
1100
1000
930
820
680
620
540
420
330
300
220
190
150
0.1
Self-resonant frequency
〔MHz〕min.
DC
Resistance
〔Ω〕
（±30％）
Rated current
〔mA〕max.
Measuring
frequency
〔MHz〕
100
100
80
68
54
41
38
30
23
19
15
12
9.5
9.0
7.0
5.5
4.5
4.5
3.0
0.08
0.065
0.11
0.13
0.16
0.20
0.30
0.36
0.65
0.77
1.5
1.9
2.8
3.7
6.1
8.4
12.3
22
28
775
890
730
630
560
510
420
375
285
250
185
165
140
125
95
80
65
50
45
±20%
±10%
±20%
7.96
2.52
0.796
0.252
●LBMF1608 TYPE
Ordering code
LBMF1608T1R0M
LBMF1608T2R2M
LBMF1608T3R3M
LBMF1608T4R7M
LBMF1608T100□
LBMF1608T220□
LBMF1608T470□
EHS
（Environmental
Hazardous
Substances）
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Inductance
〔μH〕
1.0
2.2
3.3
4.7
10
22
47
Inductance
Tolerance
±20%
±10%
±20%
Measuring
frequency
〔MHz〕
7.96
2.52
●LBC3225 TYPE
Ordering code
LB C3225T1R0MR
LB C3225T1R5MR
LB C3225T2R2MR
LB C3225T3R3MR
LB C3225T4R7MR
LB C3225T6R8MR
LB C3225T100□R
LB C3225T150□R
LB C3225T220□R
LB C3225T330□R
LB C3225T470□R
LB C3225T680□R
LB C3225T101□R
EHS
（Environmental
Hazardous
Substances）
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Inductance
〔μH〕
1.0
1.5
2.2
3.3
4.7
6.8
10
15
22
33
47
68
100
Inductance
Tolerance
±20%
±10%
±20%
●LBC2518 TYPE
EHS
（Environmental
Hazardous
Substances）
LB C2518T1R0M
RoHS
LB C2518T1R0MR
RoHS
LB C2518T1R5M
RoHS
LB C2518T2R2M
RoHS
LB C2518T3R3M
RoHS
LB C2518T4R7M
RoHS
LB C2518T6R8M
RoHS
LB C2518T100□
RoHS
LB C2518T150□
RoHS
LB C2518T220□
RoHS
LB C2518T330□
RoHS
LB C2518T470□
RoHS
LB C2518T680□
RoHS
LB C2518T101□
RoHS
LB C2518T151□
RoHS
LB C2518T221□
RoHS
LB C2518T331□
RoHS
LB C2518T471□
RoHS
LB C2518T681□
RoHS
・□Please specify the Inductance tolerance code
（K or M）
Ordering code
Inductance
〔μH〕
1.0
1.0
1.5
2.2
3.3
4.7
6.8
10
15
22
33
47
68
100
150
220
330
470
680
Inductance
Tolerance
±20%
±10%
±20%
7.96
2.52
0.796
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
44
1
wound01_e-01
■ PART NUMBERS
●LBC2016 TYPE
Ordering code
Inductance
〔μH〕
1.0
1.5
2.2
3.3
4.7
6.8
10
15
22
33
47
68
100
Inductance
Tolerance
Self-resonant frequency
〔MHz〕min.
DC
Resistance
〔Ω〕
（±30％）
Rated current
〔mA〕max.
100
80
70
55
45
38
32
28
16
14
11
10
8
0.10
0.15
0.20
0.27
0.37
0.59
0.82
1.2
1.8
2.8
4.3
7.0
8.0
690
600
520
410
355
290
245
200
165
135
110
95
75
Self-resonant frequency
〔MHz〕min.
DC
Resistance
〔Ω〕
（±30％）
Rated current
〔mA〕max.
100
70
45
40
16
11
0.19
0.33
0.50
1.2
3.7
5.8
620
430
295
200
130
90
Self-resonant frequency
〔MHz〕min.
DC
Resistance
〔Ω〕
（±30％）
Rated current
〔mA〕max.
100
68
45
30
19
11
9
0.045
0.07
0.10
0.19
0.44
0.84
1.89
960
480
345
235
175
120
80
Self-resonant frequency
〔MHz〕min.
DC
Resistance
〔Ω〕
（±30％）
Rated current
〔mA〕max.
100
80
45
32
16
11
8
0.07
0.13
0.24
0.36
1.0
1.7
4.0
400
260
200
150
100
75
50
±20%
±10%
±20%
Measuring
frequency
〔MHz〕
7.96
2.52
0.796
●LBC2012 TYPE
Ordering code
LB C2012T1R0M
LB C2012T2R2M
LB C2012T4R7M
LB C2012T100□
LB C2012T220□
LB C2012T470□
EHS
（Environmental
Hazardous
Substances）
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Inductance
〔μH〕
1.0
2.2
4.7
10
22
47
Inductance
Tolerance
±20%
±10%
±20%
Measuring
frequency
〔MHz〕
7.96
2.52
FERRITE PRODUCTS
LB C2016T1R0M
LB C2016T1R5M
LB C2016T2R2M
LB C2016T3R3M
LB C2016T4R7M
LB C2016T6R8M
LB C2016T100□
LB C2016T150□
LB C2016T220□
LB C2016T330□
LB C2016T470□
LB C2016T680□
LB C2016T101□
EHS
（Environmental
Hazardous
Substances）
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
●LBR2518 TYPE
Ordering code
LB R2518T1R0M
LB R2518T2R2M
LB R2518T4R7M
LB R2518T100□
LB R2518T220□
LB R2518T470□
LB R2518T101□
EHS
（Environmental
Hazardous
Substances）
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Inductance
〔μH〕
1.0
2.2
4.7
10
22
47
100
Inductance
Tolerance
±20%
±10%
±20%
Measuring
frequency
〔MHz〕
7.96
2.52
0.796
●LBR2012 TYPE
EHS
（Environmental
Hazardous
Substances）
LB R2012T1R0M
RoHS
LB R2012T2R2M
RoHS
LB R2012T4R7M
RoHS
LB R2012T100□
RoHS
LB R2012T220□
RoHS
LB R2012T470□
RoHS
LB R2012T101□
RoHS
・□Please specify the Inductance tolerance code
（K or M）
Ordering code
Inductance
〔μH〕
1.0
2.2
4.7
10
22
47
100
Inductance
Tolerance
±20%
±10%
±20%
Measuring
frequency
〔MHz〕
7.96
2.52
0.796
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound01_e-01
1
45
■ ELECTRICAL CHARACTERISTICS
■DC Bias characteristics（Measured by HP4285A＋42841A）
LB1608
LB2016
1R0M
1
1
10
100
DC Bias 〔mA〕
100□
10
1R0M
1
0.1
1000
101□
100
1
10
100
1000
DC Bias 〔mA〕
1000
101□
100
Inductance 〔μH〕
100M
10
LB2518
1000
100□
10
1R0M
1
0.1
10000
Inductance 〔μH〕
1000
Inductance 〔μH〕
Inductance 〔μH〕
100
0.1
Standard Type
LB2012
1
Standard Type
10
100
1000
DC Bias 〔mA〕
100□
10
1R0M
1
0.1
10000
101□
100
1
10
100
1000
DC Bias 〔mA〕
10000
High Current Type
LB3218
LBC2016
LBC2012
1000
LBC2518
1000
100
1000
1R0M
1
1
10
100
1000
DC Bias 〔mA〕
1
0.1
10000
1
10
100
DC Bias 〔mA〕
0.1
1
10
100
1000
DC Bias 〔mA〕
100□
10
1R0M
1
1
LBR2518
100
1000
DC Bias 〔mA〕
10
100□
1R0MR
1
101□
100
100□
10
100
Inductance 〔μH〕
100□Ｒ
Inductance 〔μH〕
101□Ｒ
10
10000
LBMF1608
1000
1000
10
Bottom-surface electrode Type
LBR2012
100
101□
100
0.1
10000
Low Rdc Type
ＬＢＣ3225
Inductance 〔μH〕
1R0M
1
1000
High Current Type
100□
10
4R7M
101□
100□
10
1R0M
1
Inductance 〔μH〕
0.1
1R0M
101□
100
Inductance 〔μH〕
100□
10
100□
10
Inductance 〔μH〕
101□
100
Inductance 〔μH〕
Inductance 〔μH〕
470□
1R0M
1
1R0M
100
1000
DC Bias 〔mA〕
1
10000
1
10
100
DC Bias 〔mA〕
0.1
1000
1
10
100
1000
DC Bias 〔mA〕
■Impedance-vs-Frequency characteristics（Measured by HP4291A）
LB1608
100000
10
1
1000
10
100
1000
Frequency 〔MHz〕
100
1
10000
100□
100
10
100
1000
Frequency 〔MHz〕
1
10000
1
Standard Type
100000
101□
100
10
10
100
1000
Frequency 〔MHz〕
1R0M
1000
100
1
10000
1
1000
100
10
100
1000
Frequency 〔MHz〕
1
10000
1
10
100
1000
Frequency 〔MHz〕
10000
100
10
1R0M
100
10
100
1000 10000
Frequency 〔MHz〕
1
1
10
100
1000
Frequency 〔MHz〕
10000
10000
LBMF1608
470□
10000
100□
1R0M
1000
100
10
10
1
10
100
1000
Frequency 〔MHz〕
100000
10000
100□
1000
1
101□
Impedance 〔Ω〕
Impedance 〔Ω〕
1000
1
10000
100000
101□
1R0MR
100
LBR2518
100000
100□R
1R0M
Bottom-surface electrode Type
LBR2012
101□R
100□
1000
10
Low Rdc Type
LBC3325
Impedance 〔Ω〕
10000
101□
10000
100□
10
High Current Type
1
10
100
1000
Frequency 〔MHz〕
LBC2518
1R0M
10
0.1
0.1
1
100000
101□
10000
100□
Impedance 〔Ω〕
Impedance 〔Ω〕
Impedance 〔Ω〕
1R0M
1000
10000
1
10000
470□
10000
100□
100000
100
LBC2016
100000
1
10
100
1000
Frequency 〔MHz〕
LBC2012
100000
1
1R0M
High Current Type
LB3218
10000
100□
1000
10
10
1
101□
10000
1R0M
1000
10
1
1000
LB2518
100000
101□
10000
1R0M
Impedance 〔Ω〕
100
100000
100□
10000
Impedance 〔Ω〕
Impedance 〔Ω〕
1R0M
1000
10
100
DC Bias 〔mA〕
LB2016
101□
100M
1
Standard Type
LB2012
10000
0.1
10000
Impedance 〔Ω〕
10
Impedance 〔Ω〕
1
Impedance 〔Ω〕
0.1
1
100□
4R7M
1000
100
10
1
10
100
1000
Frequency 〔MHz〕
10000
1
1
10
100
1000
Frequency 〔MHz〕
10000
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
46
1
wound01_e-01
WOUND CHIP POWER INDUCTORS (CB SERIES)
REFLOW
■ FEATURES
■ APPLICATIONS
◦This series corresponds to high electric current compared with LB/
LBC series.
Wound Chip Inductors that can be used for small DC/DC converters
and are suitable for choke uses.
◦DSC/DVC/HDD, LCD, portable telephones, game equipment.
Various audio-visual equipment, various communication equipment,
etc.
◦CBMF 1608 Series
The best efficiency design is achieved by adopting bottom-surface
electrode structure.
Wound Chip Inductors that are suitable for module design which
needs high electric current like DC/DC converters.
■ ORDERING CODE
B △
C
❶
0
1
❷
2
T
❸
❶Type
Wound chip power inductor
CB
△
C
L
MF
2
❷Characteristic Spec
Low Rdc
High current
Low profile
Bottom-surface electrode
1
0
❹
❸External Dimensions
〔mm〕
1608
（0603） 1.6×0.8
2012
（0805） 2.0×1.25
2016
（0806） 2.0×1.6
（1007） 2.5×1.8
2518
（1210） 3.2×2.5
3225
❺
❹Packaging
Tape & Reel
T
△ △ △ △ △
0
❻
❺Nominal
Inductance〔μH〕
example
1R0
1
100
10
101
100
❼
❻Inductance
Tolerances〔％〕
K
±10
M
±20
❽
❼Special
code
Standard
△
products
Low Rdc
R
type
❽Internal code
Standard
Products
△△△
△＝Blank space
※R=decimal point
■ EXTERNAL DIMENSIONS/STANDARD QUANTITY
Type
L
W
T
Standard Quantity [pcs]
Paper
Embossed
Tape
Tape
e
C
A
TYPE
1608
MF1608
2012
2016
2518
3225
A
0.55
0.55
0.7
0.7
0.8
1.0
B
0.7
0.8
0.8
0.8
1.2
1.6
Unit：mm
C
1.0
0.9
1.45
1.8
2.0
2.0
B
A
Recommended Land Patterns
Surface Mounting
・ Mounting and soldering conditions should be checked
beforehand.
・ Applicable soldering process
to those products is reflow
soldering only.
・ Recommended Land Patterns
CBC3225
3.2±0.2
2.5±0.2
2.5±0.2
0.6±0.3
（0.126±0.008） （0.098±0.008） （0.098±0.008） （0.024±0.012）
－
1000
CB2518
CBC2518
2.5±0.2
1.8±0.2
1.8±0.2
0.5±0.2
（0.098±0.008） （0.071±0.008） （0.071±0.008） （0.020±0.008）
－
2000
CB2016
CBC2016
2.0±0.2
1.6±0.2
1.6±0.2
0.5±0.2
（0.079±0.008） （0.063±0.008） （0.063±0.008） （0.020±0.008）
－
2000
CB2012
CBC2012
2.0±0.2
1.25±0.2
1.25±0.2
0.5±0.2
（0.079±0.008） （0.049±0.008） （0.049±0.008） （0.020±0.008）
－
2000
CBL2012
2.0±0.2
1.25±0.2
0.9±0.1
0.5±0.2
（0.079±0.008） （0.049±0.008） （0.035±0.004） （0.020±0.008）
4000
－
1.6±0.2
0.8±0.2
0.8±0.2
0.45±0.15
（0.063±0.2） （0.031±0.008） （0.031±0.008） （0.016±0.006）
－
3000
CBMF1608
Unit：mm
（inch）
■ AVAILABLE CAPACITANCE RANGE
Type
CB2518
Range
CB2016
CB2012
CBC3225
CBC2518
CBC2016
CBC2012
CBC2012
CBMF1608
Inductance［μH］
Imax［mA］　Rdc±30％［Ω］ Imax［mA］　Rdc±30％［Ω］ Imax［mA］　Rdc±30％［Ω］ Imax［mA］　Rdc±30％［Ω］ Imax［mA］　Rdc±30％［Ω］ Imax［mA］　Rdc±30％［Ω］ Imax［mA］　Rdc±30％［Ω］ Imax［mA］　Rdc±30％［Ω］ Imax［mA］　Rdc±30％［Ω］
1 1200 1μH 0.06 600 1μH 0.09 500 1μH 0.15 1440 1μH 0.055 1000 1μH 0.08 1100 1μH 0.1 700 1μH 0.19 620 1μH 0.15 350 1μH 0.09
22 510
0.09
510
0.13
410
0.23
1130
0.08
890
0.13
750
0.2
530
0.33
530
0.33
230
0.17
10 250
2.40
250
0.5
200
0.5
900
0.133
480
0.36
380
0.82
240
1.2
440
1.0
115
0.36
47 110
0.95
110
2.4
90
3.7
390
0.67
240
1.90
150
4.3
120
5.8
100
4.2
50
47μH
100
60
2.1
70
4.5
100μH
1000
25
24
60
7
100μH
270
1.4
100μH
160
3.7
65
28
110
47μH
2.5
47μH
8
100μH
680μH
1000μH
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
48
1
wound02_e-01
■ PART NUMBERS
●CB2012 TYPE
EHS
（Environmental
Hazardous
Substances）
Inductance
〔μH〕
CB 2012T1R0M
CB 2012T2R2M
CB 2012T3R3M
CB 2012T4R7M
CB 2012T6R8M
CB 2012T100□
CB 2012T100□R
CB 2012T150□
CB 2012T220□
CB 2012T470□
CB 2012T680□
CB 2012T101□
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
2.2
3.3
4.7
6.8
10
10
15
22
47
68
100
Ordering code
EHS
（Environmental
Hazardous
Substances）
Inductance
〔μH〕
CB 2016T1R0M
CB 2016T1R5M
CB 2016T2R2M
CB 2016T3R3M
CB 2016T4R7M
CB 2016T6R8M
CB 2016T100□
CB 2016T150□
CB 2016T220□
CB 2016T330□
CB 2016T470□
CB 2016T680□
CB 2016T101□
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
1.5
2.2
3.3
4.7
6.8
10
15
22
33
47
68
100
Ordering code
EHS
（Environmental
Hazardous
Substances）
Inductance
〔μH〕
CB 2518T1R0M
CB 2518T1R5M
CB 2518T2R2M
CB 2518T3R3M
CB 2518T4R7MR
CB 2518T4R7M
CB 2518T6R8M
CB 2518T100□
CB 2518T150□
CB 2518T220□
CB 2518T330□
CB 2518T470□
CB 2518T680□
CB 2518T101□
CB 2518T151□
CB 2518T221□
CB 2518T331□
CB 2518T471□
CB 2518T681□
CB 2518T102□
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
1.5
2.2
3.3
4.7
4.7
6.8
10
15
22
33
47
68
100
150
220
330
470
680
1000
Ordering code
EHS
（Environmental
Hazardous
Substances）
Inductance
〔μH〕
CB C2012T1R0M
CB C2012T2R2M
CB C2012T4R7M
CB C2012T100□
CB C2012T220□
CB C2012T470□
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
2.2
4.7
10
22
47
Inductance
Tolerance
±20%
±10%
±20%
Self-resonant
frequency
〔MHz〕
min.
Resistance
DC
〔Ω〕
（±30％）
100
80
55
45
38
32
32
28
16
11
10
8
0.15
0.23
0.30
0.40
0.47
0.70
0.50
1.3
1.7
3.7
6.0
7.0
Self-resonant
frequency
〔MHz〕
min.
Resistance
DC
〔Ω〕
（±30％）
100
80
70
55
45
38
32
28
16
14
11
10
8
0.09
0.11
0.13
0.20
0.25
0.35
0.50
0.70
1.0
1.7
2.4
3.0
4.5
Self-resonant
frequency
〔MHz〕
min.
Resistance
DC
〔Ω〕
（±30％）
100
80
68
54
46
46
38
30
23
19
15
12
9.5
9.0
7.0
5.5
4.5
3.5
3.0
2.4
0.06
0.07
0.09
0.11
0.10
0.13
0.15
0.25
0.32
0.50
0.70
0.95
1.5
2.1
3.2
4.5
7.0
10
17
24
Self-resonant
frequency
〔MHz〕
min.
Resistance
DC
〔Ω〕
（±30％）
100
70
45
40
16
11
0.19
0.33
0.50
1.2
3.7
5.8
Rated current〔mA〕
Temperature rise
current
Idc2
500
900
410
770
330
650
300
580
250
540
190
440
200
520
170
320
135
280
90
190
70
140
60
130
Saturation current
Idc1
Measuring
frequency
〔MHz〕
7.96
2.52
0.796
●CB2016 TYPE
Inductance
Tolerance
±20%
±10%
±20%
Rated current〔mA〕
Temperature rise
current
Idc2
600
1100
550
1000
510
1000
400
800
340
740
300
600
250
520
210
440
165
370
130
270
110
240
90
210
70
170
Saturation current
Idc1
Measuring
frequency
〔MHz〕
7.96
FERRITE PRODUCTS
Ordering code
2.52
0.796
●CB2518 TYPE
Inductance
Tolerance
±20%
±10%
±20%
Rated current〔mA〕
Temperature rise
current
Idc2
1200
1500
650
1400
510
1300
440
1200
310
1200
340
1100
270
930
250
820
180
650
165
580
130
460
110
420
70
310
60
260
55
210
50
180
40
140
35
120
30
90
25
75
Saturation current
Idc1
Measuring
frequency
〔MHz〕
7.96
2.52
0.796
0.252
●CBC2012 TYPE
Inductance
Tolerance
±20%
±10%
±20%
Rated current〔mA〕
Temperature rise
current
Idc2
700
840
530
640
360
520
240
340
170
190
120
150
Saturation current
Idc1
Measuring
frequency
〔MHz〕
7.96
2.52
・□Please specify the Inductance tolerance code
（Ｋor Ｍ）
※）The saturation current value
（Idc1）is the DC current value having inductance decrease down to 30%.（at 20℃）
※）
The temperature rise current value
（Idc2）is the DC current value having temperature increase up to 40℃.（at 20℃）
※）The maximum rated current is the DC current value that satisfies both of DC saturation current value and temperature rise current value.
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound02_e-01
1
49
■ PART NUMBERS
●CBC2016 TYPE
Ordering code
EHS
（Environmental
Hazardous
Substances）
Inductance
〔μH〕
CB C2016T1R0M
CB C2016T1R5M
CB C2016T2R2M
CB C2016T3R3M
CB C2016T4R7M
CB C2016T6R8M
CB C2016T100□
CB C2016T150□
CB C2016T220□
CB C2016T330□
CB C2016T470□
CB C2016T680□
CB C2016T101□
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
1.5
2.2
3.3
4.7
6.8
10
15
22
33
47
68
100
Ordering code
EHS
（Environmental
Hazardous
Substances）
Inductance
〔μH〕
CB C2518T1R0M
CB C2518T1R5M
CB C2518T2R2M
CB C2518T3R3M
CB C2518T4R7M
CB C2518T6R8M
CB C2518T100□
CB C2518T150□
CB C2518T220□
CB C2518T330□
CB C2518T470□
CB C2518T680□
CB C2518T101□
CB C2518T151□
CB C2518T221□
CB C2518T331□
CB C2518T471□
CB C2518T681□
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
1.5
2.2
3.3
4.7
6.8
10
15
22
33
47
68
100
150
220
330
470
680
EHS
（Environmental
Hazardous
Substances）
Inductance
〔μH〕
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
1.5
2.2
3.3
4.7
6.8
10
15
22
33
47
68
100
Ordering code
EHS
（Environmental
Hazardous
Substances）
Inductance
〔μH〕
CB L2012T1R0M
CB L2012T2R2M
CB L2012T4R7M
CB L2012T100M
CB L2012T220M
CB L2012T470M
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
2.2
4.7
10
22
47
Self-resonant
frequency
〔MHz〕
min.
Resistance
DC
〔Ω〕
（±30％）
100
80
70
55
45
38
32
28
16
14
11
10
8
0.10
0.15
0.20
0.27
0.37
0.59
0.82
1.2
1.8
2.8
4.3
7.0
8.0
Self-resonant
frequency
〔MHz〕
min.
Resistance
DC
〔Ω〕
（±30％）
100
80
68
54
41
38
30
23
19
15
12
9.5
9.0
7.0
5.5
4.5
3.5
3.0
0.08
0.11
0.13
0.16
0.20
0.30
0.36
0.65
0.77
1.5
1.9
2.8
3.7
6.1
8.4
12.3
22
28
Self-resonant
frequency
〔MHz〕
min.
Resistance
DC
〔Ω〕
（±30％）
250
220
190
160
70
50
23
20
17
13
10
8
6
0.055
0.06
0.08
0.095
0.10
0.12
0.133
0.195
0.27
0.41
0.67
1.0
1.4
Inductance
Tolerance
Self-resonant
frequency
〔MHz〕
min.
Resistance
DC
〔Ω〕
（±30％）
±20%
100
80
45
32
23
11
0.15
0.39
0.66
1.0
2.1
4.2
Inductance
Tolerance
±20%
±10%
±20%
Rated current〔mA〕
Temperature rise
current
Idc2
1100
1100
1000
1000
750
720
600
610
550
530
450
450
380
350
300
300
250
240
220
220
150
150
130
130
110
110
Saturation current
Idc1
Measuring
frequency
〔MHz〕
7.96
2.52
0.796
●CBC2518 TYPE
Inductance
Tolerance
±20%
±10%
±20%
Rated current〔mA〕
Temperature rise
Saturation current
current
Idc1
Idc2
1000
1200
950
1190
890
1100
730
1020
680
920
550
740
480
680
350
500
320
460
270
320
240
290
200
200
160
170
140
130
110
115
100
90
80
70
65
60
Measuring
frequency
〔MHz〕
7.96
2.52
0.796
●CBC3225 TYPE
Ordering code
CB C3225T1R0MR
CB C3225T1R5MR
CB C3225T2R2MR
CB C3225T3R3MR
CB C3225T4R7MR
CB C3225T6R8MR
CB C3225T100□R
CB C3225T150□R
CB C3225T220□R
CB C3225T330□R
CB C3225T470□R
CB C3225T680□R
CB C3225T101□R
Inductance
Tolerance
±20%
±10%
±20%
Rated current〔mA〕
Temperature rise
current
Idc2
2000
1440
2000
1310
2000
1130
2000
1040
1250
1010
950
940
900
900
730
850
620
780
500
570
390
480
320
410
270
340
Saturation current
Idc1
Measuring
frequency
〔MHz〕
0.1
●CBL2012 TYPE
Rated current〔mA〕
Temperature rise
current
Idc2
620
950
440
590
275
490
205
370
150
250
100
140
Saturation current
Idc1
Measuring
frequency
〔MHz〕
0.1
・□Please specify the Inductance tolerance code
（Ｋor Ｍ）
※）The saturation current value
（Idc1）is the DC current value having inductance decrease down to 30%.（at 20℃）
※）The temperature rise current value
（Idc2）is the DC current value having temperature increase up to 40℃.（at 20℃）
※）The maximum rated current is the DC current value that satisfies both of DC saturation current value and temperature rise current value.
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
50
1
wound02_e-01
■ PART NUMBERS
●CBMF1608 TYPE
Ordering code
CBMF1608T1R0M
CBMF1608T2R2M
CBMF1608T3R3M
CBMF1608T4R7M
CBMF1608T100□
CBMF1608T220□
CBMF1608T470□
EHS
（Environmental
Hazardous
Substances）
Inductance
〔μH〕
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
2.2
3.3
4.7
10.0
22
47
Inductance
Tolerance
±20%
±10%
±20%
Self-resonant
frequency
〔MHz〕
min.
Resistance
DC
〔Ω〕
（±30％）
100
80
60
45
32
16
11
0.09
0.17
0.22
0.24
0.36
1.0
2.5
Rated current〔mA〕
Temperature rise
current
Idc2
290
770
190
560
170
500
145
470
115
380
70
230
50
140
Saturation current
Idc1
Measuring
frequency
〔MHz〕
7.96
2.52
・□Please specify the Inductance tolerance code
（Ｋor Ｍ）
※）The saturation current value
（Idc1）is the DC current value having inductance decrease down to 30%.（at 20℃）
※）The temperature rise current value
（Idc2）is the DC current value having temperature increase up to 40℃.（at 20℃）
※）The maximum rated current is the DC current value that satisfies both of DC saturation current value and temperature rise current value.
FERRITE PRODUCTS
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound02_e-01
1
51
■ ELECTRICAL CHARACTERISTICS
■DC Bias characteristics　Measured by HP4285A＋42841A
CB2012
CB2518
1000
100□
10
1R0M
1
1
10
100
1000
DC Bias 〔mA〕
101□
100
100□
10
1R0M
1
0.1
10000
1000
Inductance 〔μH〕
101□
100
Inductance 〔μH〕
Inductance 〔μH〕
1000
0.1
Low Rdc Type
CB2016
1
10
100
1000
DC Bias 〔mA〕
100□
10
1R0M
1
0.1
10000
101□
100
1
10
100
1000
DC Bias 〔mA〕
10000
High Current Type
CBC2012
1
10
100
DC Bias 〔mA〕
100
Low Profile Type
100□
10
1R0M
1
0.1
1000
1
10
100
1000
DC Bias 〔mA〕
100
100□
10
1R0M
1
0.1
10000
101□R
101□
1
10
100
1000
DC Bias 〔mA〕
1R0MR
1
0.1
10000
100□R
10
1
10
100
1000
DC Bias 〔mA〕
10000
Bottom-surface electrode Type
CBL2012
CBMF1608
100
100
100□
470M
4R7M
10
100M
Inductance 〔μH〕
Inductance 〔μH〕
CBC3225
100
Inductance 〔μH〕
1R0M
1
101□
Inductance 〔μH〕
100□
10
0.1
CBC2518
1000
1000
470□
Inductance 〔μH〕
Inductance 〔μH〕
100
CBC2016
10
1R0M
4R7M
1
1
10
100
DC Bias 〔mA〕
1
1000
1
10
100
DC Bias 〔mA〕
1000
■Impedance-vs-Frequency characteristics　Measured by HP4291A
CB2012
100□
10000
1000
100
101□
100□
1
10
100
1000
Frequency 〔MHz〕
100
1
10000
100□
10000
1R0M
1000
10
10
1
CB2518
100000
101□
10000
1R0M
Impedance 〔Ω〕
Impedance 〔Ω〕
100000
101□
Impedance 〔Ω〕
100000
Low Rdc Type
CB2016
1R0M
1000
100
10
1
100
1000
10
Frequency 〔MHz〕
1
10000
1
100
1000
10
Frequency 〔MHz〕
10000
High Current Type
CBC2012
CBC2016
1000
100
10
1R0M
1000
100
10
100
1000
10
Frequency 〔MHz〕
1
10000
Low Profile Type
1
100
1000
10
Frequency 〔MHz〕
10000
1R0M
1000
100
1
100□R
10000
100□
1R0MR
1000
100
10
1
100
1000
10
Frequency 〔MHz〕
10000
1
1
100
1000
10
Frequency 〔MHz〕
10000
Bottom-surface electrode Type
CBMF1608
100000
100000
470M
10000
100M
470□
10000
4R7M
Impedance 〔Ω〕
Impedance 〔Ω〕
101□R
10
CBL2012
1000
100
10
1
10000
Impedance 〔Ω〕
Impedance 〔Ω〕
Impedance 〔Ω〕
1R0M
1
100000
101□
100□
10000
100□
CBC3225
100000
101□
470□
10000
1
CBC2518
100000
Impedance 〔Ω〕
100000
100□
4R7M
1000
100
10
1
100
10
Frequency 〔MHz〕
1000
1
1
10
100
1000
Frequency 〔MHz〕
10000
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
52
1
wound02_e-01
WOUND CHIP INDUCTORS FOR SIGNAL LINE (LB/LE SERIES M TYPE)
LB： REFLOW
LE：
WAVE
REFLOW
■ FEATURES
■ APPLICATIONS
◦LBM2016 Series
High Q and narrow tolerance are achieved by adopting bottom-surface electrode structure.Wound Chip Inductors that are suitable for
module design of signal line uses.
◦DSC/DVC/HDD, LCD, portable telephones, game equipment.
Various audio-visual equipment, various communication equipment,
etc.
◦LEM2520 Series
A high-quality inductor that is simple to mass-produce and conforms
to the same production process and basic construction as an axial
lead type inductor.
■ ORDERING CODE
L
B M
2
0
❶
1
6
T
❷
❶Type
Wound chip inductor for
signal line
Wound chip inductor for
LEM
signal line
0
❸
❷External
Dimensions〔mm〕
2016
2.0×1.6
2520
2.5×2.0
LBM
1
T
0
❹
❸Packaging
Tape & Reel
J △
❺
❹Nominal
Inductance〔μH〕
example
R12
0.12
1R0
1.00
100
10.0
❻
❺Inductance
Tolerances
J
±5%
K
±10%
❻Internal code
Standard
Products
△
△＝Blank space
※R=decimal point
■ EXTERNAL DIMENSIONS/STANDARD QUANTITY
LBM2016
■ AVAILABLE CAPACITANCE RANGE
Type
LEM2520
Range
e
Type
L
W
Ordinary type
Inductance［μH］
0.12
e
T
e
W
2.0±0.2
1.6±0.2
1.6±0.2
0.5±0.2
（0.08±0.008） （0.063±0.008）（0.063±0.008） （0.02±0.008）
2.5±0.2
2.0±0.2
1.8±0.2
0.45
1.4±0.1
LEM2520
（0.098±0.008） （0.079±0.008） （0.071±0.008）
（0.018）
（0.055±0.004）
LBM2016
Standard Quantity [pcs]
Paper Tape Embossed Tape
－
1.0
10
100
LBM2016
Idc［mA］
610
LEM2520
Rdc±30％［Ω］ Idc［mA］
0.13
520
Rdc±30％［Ω］
0.37
385
0.38
245
1.10
215
1.20
155
3.50
80
8.00
100μH
60
21.00
100μH
2000
Unit：mm
（inch）
Recommended Land Patterns
Surface Mounting
・Mounting and soldering conditions should be checked beforehand.
（LB only）
・Applicable soldering process to those products is reflow soldering only.
・Recommended Land Patterns
Unit：mm
C
A
B
A
TYPE
LBM2016
LEM2520
A
0.7
0.9
B
0.8
1.5
C
1.8
1.5
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
54
1
wound03_e-01
■ PART NUMBERS
●LBM2016 TYPE
Ordering code
Inductance
〔μH〕
Inductance
Tolerance
0.12
0.15
0.18
0.22
0.27
0.33
0.39
0.47
0.56
0.68
0.82
1.0
1.2
1.5
1.8
2.2
2.7
3.3
3.9
4.7
5.6
6.8
8.2
10
12
15
18
22
27
33
39
47
56
68
82
100
±5％
Inductance
〔μH〕
Inductance
Tolerance
Q
（min.）
30
25
20
15
Self-resonant
frequency
〔MHz〕min.
600
550
500
450
425
400
375
350
300
270
250
220
180
135
100
75
55
48
43
40
36
33
30
27
23
20
18
17
16
15
14
13
12
11
10
9.0
Resistance
DC
〔Ω〕
（±30％）
0.13
0.15
0.15
0.20
0.21
0.21
0.26
0.26
0.29
0.32
0.34
0.38
0.41
0.47
0.48
0.54
0.59
0.68
0.74
0.78
0.88
0.97
1.10
1.20
1.4
1.5
2.5
2.8
3.2
3.6
3.9
4.1
5.9
7.0
7.7
8.0
Rated current
〔mA〕
（max.）
610
570
560
520
510
490
440
430
410
400
390
385
370
350
345
340
310
290
275
270
255
240
225
215
200
190
150
140
130
125
120
115
95
90
85
80
Measuring
frequency
〔MHz〕
Self-resonant
frequency
〔MHz〕min.
600
550
500
450
425
400
375
350
300
270
250
220
180
135
100
75
55
48
43
40
36
33
30
27
23
20
18
17
16
15
14
13
12
11
10
9
Resistance
DC
〔Ω〕
（±30％）
0.37
0.42
0.46
0.52
0.56
0.60
0.65
0.68
0.75
0.85
1.00
1.10
1.20
1.30
1.45
1.55
1.70
1.90
2.10
2.30
2.50
2.70
3.05
3.50
3.80
4.40
4.80
5.50
6.30
7.10
9.50
11.10
12.10
16.60
19.00
21.00
Rated current
〔mA〕
（max.）
520
480
460
430
420
400
375
350
325
300
260
245
230
220
210
200
195
185
180
175
170
165
160
155
150
140
130
125
115
110
90
80
75
70
65
60
Measuring
frequency
〔MHz〕
25.2
7.96
FERRITE PRODUCTS
LB M2016TR12J
LB M2016TR15J
LB M2016TR18J
LB M2016TR22J
LB M2016TR27J
LB M2016TR33J
LB M2016TR39J
LB M2016TR47J
LB M2016TR56J
LB M2016TR68J
LB M2016TR82J
LB M2016T1R0J
LB M2016T1R2J
LB M2016T1R5J
LB M2016T1R8J
LB M2016T2R2J
LB M2016T2R7J
LB M2016T3R3J
LB M2016T3R9J
LB M2016T4R7J
LB M2016T5R6J
LB M2016T6R8J
LB M2016T8R2J
LB M2016T100J
LB M2016T120J
LB M2016T150J
LB M2016T180J
LB M2016T220J
LB M2016T270J
LB M2016T330J
LB M2016T390J
LB M2016T470J
LB M2016T560J
LB M2016T680J
LB M2016T820J
LB M2016T101J
EHS（Environmental
Hazardous
Substances）
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
2.52
0.796
●LEM2520 TYPE
Ordering code
LEM 2520 TR12K
LEM 2520 TR15K
LEM 2520 TR18K
LEM 2520 TR22K
LEM 2520 TR27K
LEM 2520 TR33K
LEM 2520 TR39K
LEM 2520 TR47K
LEM 2520 TR56K
LEM 2520 TR68K
LEM 2520 TR82K
LEM 2520 T1R0J
LEM 2520 T1R2J
LEM 2520 T1R5J
LEM 2520 T1R8J
LEM 2520 T2R2J
LEM 2520 T2R7J
LEM 2520 T3R3J
LEM 2520 T3R9J
LEM 2520 T4R7J
LEM 2520 T5R6J
LEM 2520 T6R8J
LEM 2520 T8R2J
LEM 2520 T100J
LEM 2520 T120J
LEM 2520 T150J
LEM 2520 T180J
LEM 2520 T220J
LEM 2520 T270J
LEM 2520 T330J
LEM 2520 T390J
LEM 2520 T470J
LEM 2520 T560J
LEM 2520 T680J
LEM 2520 T820J
LEM 2520 T101J
EHS（Environmental
Hazardous
Substances）
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
0.12
0.15
0.18
0.22
0.27
0.33
0.39
0.47
0.56
0.68
0.82
1.0
1.2
1.5
1.8
2.2
2.7
3.3
3.9
4.7
5.6
6.8
8.2
10
12
15
18
22
27
33
39
47
56
68
82
100
Q
（min.）
±10％
30
±5％
25
20
15
25.2
7.96
2.52
0.796
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound03_e-01
1
55
■ ELECTRICAL CHARACTERISTICS
●LBM2016
■Q-vs-Frequency characteristics
■Impedance-vs-Frequency characteristics
100
■Inductance-vs-Frequency characteristics
1000
1000000
101J
1R0J
100000
1R0J
101J
Q
100J
Inductance[μH]
100J
10000
10
1000
10
Frequency[MHz]
100
10
1
10
1
100
0
1
100
10
Freaquency[MHz]
100
0
1
101J
100J
1R0J
10
Freaquency[MHz]
100
●LEM2520
■Q-vs-Frequency characteristics
Measured by HP4285A＋42851A
■DC Bias characteristics
Measured by HP4285A＋42841A
■Temperature characteristics
Measured by HP4285A＋42851A
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
56
1
wound03_e-01
■ PACKAGING
①Minimum Quantity
④Leader and Blank Portion
Type
LBC3225/CBC3225
LB3218
LBR2518/LBC2518/LB251
/CB2518/CBC2518/LEM2520
LBM2016/LBC2016/
LB2016/CB2016/CBC2016
LB2012/LBC2012/LBR202
/CB2012/CBC2012
CBL2012
LB1608
LBMF1608/CBMF1608
Standard Quantity［pcs］
Papar Tape
Embossed Tape
ー
1000
ー
2000
ー
2000
ー
2000
ー
3000
4000
4000
ー
ー
ー
3000
⑤Reel Size
＋0.039
φ60 ＋1
)
−0（φ2.36 −0
◦Embossed tape
φ180 ＋0
（φ7.09 ＋0
−3
−0.118 )
2.5 max
（0.098）
②Tape material
10.0±1.5
(0.394±0.059)
⑥Top Tape Strength
The top tape requires a peel-off force 0.1 to 0.7N in the direction of the arrow as
illustrated below.
Pull direction
③Taping Dimensions
◦Embossed Tape（0.315 inches wide）
◦Card board carrier tape（0.315 inches wide）
Chip cavity
Type
LBM 2016
LEM 2520
LBC3225/
CBC3225
LB3218
A
Insertion pitch
B
F
Tape thickness
T
K
2.1±0.1
4.0±0.1
0.3±0.05
1.9max.
1.75±0.1
（0.069±0.004）（0.083±0.004）（0.157±0.004）（0.012±0.002） （0.074）
2.3±0.1
2.7±0.1
4.0±0.1
0.3±0.05
2.1±0.1
（0.091±0.004） （0.106±0.004）（0.157±0.004）（0.012±0.002）（0.083±0.004）
2.8±0.1
3.5±0.1
4.0±0.1
0.3±0.05
4.0max.
（0.110±0.004）（0.138±0.004）（0.157±0.004）（0.012±0.002） （0.157）
2.1±0.1
3.5±0.1
4.0±0.1
0.3±0.05
2.2max.
（0.084±0.004） （0.014±0.004）（0.157±0.004）（0.012±0.002） （0.086）
LB2518 / CB2518
2.15±0.1
2.7±0.1
4.0±0.1
0.3±0.05
2.2max.
LBC2518 / CBC2518
（0.085±0.004） （0.107±0.004）（0.157±0.004）（0.012±0.002） （0.086）
LBR2518
LB2016/ CB2016
1.75±0.1
2.1±0.1
4.0±0.1
0.3±0.05
1.9max.
LBC2016 / CBC2016 （0.069±0.004）（0.083±0.004）（0.157±0.004）（0.012±0.002） （0.074）
LB2012 / CB2012
1.45±0.1
2.25±0.1
4.0±0.1
0.25±0.05 1.45max.
LBC2012 / CBC2012
（0.058±0.004） （0.09±0.004） （0.157±0.004）（0.010±0.002） （0.057）
LBR2012
1.55±0.1
2.3±0.1
4.0±0.1
1.1max.
1.1max.
CBL2012
（0.044）
（0.061±0.004） （0.091±0.004） （0.157±0.004） （0.044）
1.0±0.1
1.8±0.1
4.0±0.1
1.1max.
1.1max.
LB1608
（0.044）
（0.059±0.004） （0.072±0.004） （0.157±0.004） （0.044）
LBMF1608 /
1.1±0.1
1.9±0.1
4.0±0.1
0.25±0.05
1.2max.
CBMF1608
（0.04±0.004） （0.076±0.004） （0.157±0.004）（0.010±0.002） （0.047）
Unit：mm
（inch）
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound0103_reli_e-01
1
wound0103_reli-PRP1
■ RELIABILITY DATA
1.Operating temperature Range
LEM2520
LB3218
LB2518
LB2016
LBC3225
LBC2518
LBC2016
LBR2518
LBR2012
CB2518
CB2016
CB2012
CBC2016
CBC2518
CBC3225
CBL2012
CBMF1608
LBM2016
2.Storage
LEM2520
LB3218
LBC3225
LBR2518
CB2518
CBC3225
CBL2012
CBMF1608
LBM2016
LB2518
LBC2518
LBR2012
CB2016
CBC2518
ー40～＋85℃
LB2012
LBC2012
LB1608
LBMF1608
（Including self-generated heat）
ー25～＋105℃
CBC2012
LB2016
LBC2016
LB2012
LBC2012
CB2012
CBC2016
CBC2012
LB1608
LBMF1608
ー40～＋85℃
3.Rated Current
LEM2520
LB3218
LB2518
LB2016
LB2012
LB1608
LBMF1608
LBC2016
LBC2012
LBC3225
LBC2518
LBR2518
LBR2012
Within the specified tolerance
CB2518
CB2016
CB2012
CBC2016
CBC2012
CBC2518
CBC3225
CBL2012
CBMF1608
LBM2016
【Test Methods and Remarks】
LEM Series
The maximum DC value having inductance decrease within 10％ and temperature increase within 20℃ by the application of DC bias.
4.Inductance
LEM2520
LB3218
LB2518
LB2016
LBC2016
LBC3225
LBC2518
LBR2518
LBR2012
CB2518
CB2016
CB2012
CBC2016
CBC2518
CBC3225
CBL2012
CBMF1608
LBM2016
【Test Methods and Remarks】
LEM Series R12～101
LB2012
LBC2012
LB1608
LBMF1608
Within the specified tolerance
CBC2012
LB・LBC・LBR・CB・CBC・CBL・LBMF・CBMF・LBM Series
Measuring equipment：LCR Meter
（HP4285A＋42851A or its equivalent）
Measuring frequency：Specified frequency
Measuring equipment：LCR Mater
（HP4285A or its equivalent）
5.Q
LEM2520
Within the specified tolerance
LB3218
LB2518
LB2016
LB2012
LB1608
LBMF1608
LBC2016
LBC2012
LBC3225
LBC2518
LBR2518
LBR2012
CB2518
CB2016
CB2012
CBC2016
CBC2012
CBC2518
CBC3225
CBL2012
CBMF1608
LBM2016
Within the specified tolerance
【Test Methods and Remarks】
LEM Series R12～101 Measuring equipment：LCR Meter（HP4285A＋42851A or its equivalent）
Measuring frequency：Specified frequency
LBM Series
Measuring equipment：LCR Mater
（HP4285A or its equivalent）
6.DC Resisitance
LEM2520
LB3218
LB2518
LB2016
LB2012
LB1608
LBMF1608
LBC2016
LBC2012
LBC3225
LBC2518
LBR2518
LBR2012
Within the specified tolerance
CB2518
CB2016
CB2012
CBC2016
CBC2012
CBC2518
CBC3225
CBL2012
CBMF1608
LBM2016
【Test Methods and Remarks】
LEM・LB・LBC・LBR・CB・CBC・CBL・LBM・LBMF・CBMF Series　Measuring equipment：DC Ohmmeter
（HIOKI 3227 or its equivalent）
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound0103_reli-PRP2
1
wound0103_reli_e-01
■ RELIABILITY DATA
7.Self-Resonant Frequency
LEM2520
LB3218
LB2518
LB2016
LB2012
LBC2016
LBC2012
LBC3225
LBC2518
LBR2518
LBR2012
CB2518
CB2016
CB2012
CBC2016
CBC2012
CBC2518
CBC3225
CBL2012
CBMF1608
LBM2016
【Test Methods and Remarks】
LEM2520
LB・LBC・LBR・CB・CBC・CBL・LBMF・CBMF Series
LBM Series
LB1608
LBMF1608
Within the specified tolerance
Measuring equipment：Impedance analyzer
（HP4291A or its equivalent）
Measuring equipment：Impedance analyzer（HP4291A or its equivalent）
Measuring equipment：Network analyzer
（HP8720B or its equivalent）
8.Temperature Characteristic
LEM2520
LB3218
LB2518
LB2016
LB2012
LBC3225
LBC2518
LBC2016
LBC2012
LBR2518
CB2518
LBR2012
CB2016
CB2012
CBC3225
CBC2518
CBC2016
LB1608
Inductance change:Within±5％
Inductance change:Within±15％
LBMF1608・LB3218　Inductance change:Within±20％
LBC3225・LBC2518・LBC2016 Inductance change:Within±20％
LBC2012
Inductance change:Within±30％
Inductance change:Within±15％
Inductance change:Within±15％
CBC3225・CBC2518・CBC2016 Inductance change:Within±20％
CBC2012
Inductance change:Within±30％
Inductance change:Within±15％
Inductance change:Within±20％
Inductance change:Within±5％
LBMF1608
CBC2012
CBL2012
CBMF1608
LBM2016
【Test Methods and Remarks】
Change of maximum inductance deviation in step 1-5　Step
1
2
Temperture
（℃）
20
ー25
3
4
5
20（Reference temperature） ＋85（Maximum operating temperature）
20
9.Rasistance to Flexure of Substrate
LEM2520
LB3218
LB2518
LB2016
LB2012
LB1608
LBMF1608
LBC2016
LBC2012
LBC3225
LBC2518
LBR2518
LBR2012
No damage.
CB2518
CB2016
CB2012
CBC2016
CBC2012
CBC2518
CBC3225
CBL2012
CBMF1608
LBM2016
【Test Methods and Remarks】
Pressing jig
Warp： 2mm
（LB・LBC・LBR・CB・CBC・CBL・LBM・LBMF・CBMF Series）
3mm
（LEM2520）
LB・LBMF・
CBMF1608
Test substrate: Printed board
：0.8mm
Others：1.0mm
According to JIS C0051
Board
10.Body Strength
LEM2520
LB3218
LB2518
LB2016
LB2012
LB1608
LBMF1608
LBC2016
LBC2012
LBC3225
LBC2518
LBR2518
LBR2012
CB2518
CB2016
CB2012
CBC2016
CBC2012
CBC2518
CBC3225
CBL2012
CBMF1608
LBM2016
【Test Methods and Remarks】
LB・LBC・LBR・CB・CBC・CBL・LBM・LEM2520 Applied force：10N
Duration：10sec.
LB1608・LBMF1608・CBMF1608
Applied force：5N
Duration：10sec.
No damage.
11.Self Resonant Freguency
LEM2520
LB3218
LB2518
LB2016
LB2012
LB1608
LBMF1608
Inductance change : Within－10％
LBC2016
LBC2012
LBC3225
LBC2518
LBR2518
LBR2012
Inductance change : Within－20％
CB2518
CB2016
CB2012
CBC2012
CBC2518
CBC2016
CBC3225
Inductance change : Within－30％
CBL2012
CBMF1608
LBM2016
Inductance change : Within－10％
【Test Methods and Remarks】
Measure inductance with application of rated current using LCR metre to compare it with the initial value.
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound0103_reli_e-01
1
wound0103_reli-PRP3
■ RELIABILITY DATA
12.Adhesion of terminal electrode
LEM2520
LB3218
LB2518
LB2016
LB2012
LB1608
LBMF1608
LBC3225
LBC2518
LBC2016
LBC2012
LBR2518
LBR2012
No abnormality.
CB2518
CB2016
CB2012
CBC2016
CBC2012
CBC2518
CBC3225
CBL2012
CBMF1608
LBM2016
【Test Methods and Remarks】
LB・LBC・LBR・CB・CBC・CBL・LBM・LBMF・CBMF・LEM2520　Applied force：10N to X and Y directions
Duration：5 sec.
Test substrate：Printed board
LB1608・CBMF1608・LBMF1608
Applied force：5N to X and Y directions
Duration：5 sec.
Test substrate：Printed board
13.Resistance to vibration
LEM2520
Inductance change:Within±5％
LB3218
LB2518
LB2016
LB2012
LB1608
LBMF1608
LBC2518
LBC2016
LBC2012
LBC3225
LBR2518
LBR2012
Inductance change:Within±10％
CB2518
CB2016
CB2012
CBC2016
CBC2012
CBC2518
CBC3225
CBL2012
CBMF1608
LBM2016
Inductance change:Within±5％
【Test Methods and Remarks】
LEM・LB・LBC・LBR・CB・CBC・CBL・LBM・LBMF・CBMF：According to JIS C5102 clause 8.2.
Vibration type：A
Directions：2 hrs each in X, Y and Z directions. Total：6 hrs
Frequency range：10 to 55 to 10 Hz（1min.）
Amplitude：1.5mm
Mounting method：Soldering onto printed board
Recovery：At least 2 hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs.
LEM：Recovery
At least 1 hr of recovery under the standard condition after the test, followed by the measurement within 2 hrs.
14.Drop test
LEM2520
Inductance change:Within±5％
LB3218
LB2518
LB2016
LB2012
LB1608
LBMF1608
LBC2016
LBC2012
LBC3225
LBC2518
LBR2518
LBR2012
CB2518
CB2016
CB2012
CBC2016
CBC2012
CBC2518
CBC3225
CBL2012
CBMF1608
LBM2016
【Test Methods and Remarks】
LEM：
Acceleration：980m/sec2
Duration：6msec
Number of times：6 sides × 3 times
Mounting method：Soldering onto printed board
Recovery：At least 2 hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs.
LEM：Recovery
At least 1 hr of recovery under the standard condition after the test, followed by the measurement within 2 hrs.
15.Solderability
LEM2520
LB3218
LB2518
LB2016
LBC3225
LBC2518
LBC2016
LBR2518
LBR2012
CB2518
CB2016
CB2012
CBC2016
CBC2518
CBC3225
CBL2012
CBMF1608
LBM2016
【Test Methods and Remarks】
LEM：
LB2012
LBC2012
LB1608
No significant abnormality in appearance.
No significant abnormality in appearance.
No significant abnormality in appearance.
No significant abnormality in appearance.
LBMF1608
At least 90％ of surface of terminal electrode is covered by new
CBC2012
Solder temperature：230±5℃
Duration：5±0.5sec.
Flux：Methanol solution with 25％ of colophony
LB・LBC・LBR・CB・CBC・CBL・LBM・LBMF・CBMF： Solder temperature：245±5℃
Duration：5±0.5sec
Flux：Methanol solution with 25％ of colophony
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound0103_reli-PRP4
1
wound0103_reli_e-01
■ RELIABILITY DATA
16.Resisitance to soldering heat
LEM2520
LB3218
LB2518
LB2016
LB2012
LB1608
LBMF1608
No significant abnormality in appearance.
LB3218，LB2518，LB2016，LB2012，LB1608
Inductance change:Within±10％ No significant abnormality in appearance.
LBMF1608
Inductance change:Within±20％ No significant abnormality in appearance.
LBC3225
LBC2518
LBC2016
LBC2012
LBR2518
LBR2012
CB2518
CB2016
CB2012
Inductance change:Within±10％
CBC3225
CBC2518
CBC2016
CBC2012
CBL2012
CBMF1608
Inductance change:Within±20％
LBM2016
Inductance change:Within±5％
【Test Methods and Remarks】
LEM：
Reflow condition 3 times of reflow over at 220±5℃ for 40sec. MAX, With Peak temperature at 240±5℃ for 5 sec.
MAX.（Refer to a Profile of chart below.）
No significant abnormality in appearance.
No significant abnormality in appearance.
No significant abnormality in appearance.
Flow condition
Solder temperature：260±5℃
Duration：10±1sec. Once
LB・LBC・LBR・CB・CBC・CBL・LBM・LBMF・CBMF：
3 times of reflow oven at 230℃ MIN for 40sec. with peak temperature at 260 ℃ for 5sec.
17.Resisitance to solvent
LEM2520
LB3218
LB2518
LB2016
LB2012
LB1608
LBMF1608
LBC2016
LBC2012
LBC3225
LBC2518
LBR2518
LBR2012
CB2518
CB2016
CB2012
CBC2016
CBC2012
CBC2518
CBC3225
CBL2012
CBMF1608
LBM2016
【Test Methods and Remarks】
Solvent temperature：Room temperature
Type of solvent：Isopropyl alcohol
（LEM2520・LB・LBC・LBR・CB・CBC・CBL・LBM・LBMF・CBMF）
Cleaning conditions：90s. Immersion and cleaning.
（LEM2520・LB・LBC・LBR・CB・CBC・CBL・LBM・LBMF・CBMF）
No significant abnormality in appearance
18.Thermal shock
LEM2520
LB3218
LB2012
LB2518
LB2016
LB1608
LBMF1608
LBC2518
LBC2016
LBC2012
LBC3225
LBR2518
LBR2012
CB2518
CB2016
CB2012
CBC2016
CBC2012
CBC2518
CBC3225
CBL2012
CBMF1608
LBM2016
【Test Methods and Remarks】
Step
Temperature
（℃） Duration
（min）
LEM : Conditions for 1cycle
1
ー40
30
2
＋85
30
Inductance change :Within±10％
Q→ R12～4R7：30 min.
5R6～330：25 min.
390～820：20 min.
101：15 min.
Inductance change:Within±10％
No significant abnormality in appearance.
Number of cycle：100 cycle
Recovery：At least 1 hr of recovery under the standard condition after the test, followed by the measurement within 2 hrs.
LB・LBC・LBR・CB・CBC・CBL・LBM・LBMF・CBMF： ー40～＋85℃, maintain times 30min. ,100 cycle
Recovery：At least 2 hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs.
19.Damp heat
LEM2520
Inductance change :Within±10％
Q→ R12～4R7：30 min.
5R6～330：25 min.
390～820：20 min.
101：15 min.
LB3218
LB2012
LB2518
LB2016
LB1608
LBMF1608
LBC2518
LBC2016
LBC2012
LBC3225
LBR2518
LBR2012
CB2518
CB2016
CB2012
Inductance change:Within±10％
CBC2016
CBC2012
CBC2518
CBC3225
CBL2012
CBMF1608
LBM2016
【Test Methods and Remarks】
Temperature：60±2℃
Humidity：90～95％RH
Duration：1000 hrs
Recovery：At least 2 hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs.
LEM：Recovery
At least 1 hr of recovery under the standard condition after the test, followed by the measurement within 2 hrs.
No significant abnormality in appearance.
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound0103_reli_e-01
1
wound0103_reli-PRP5
■ RELIABILITY DATA
20.Loading under damp heat
LEM2520
Inductance change :Within±10％
Q→ R12～4R7：30 min.
5R6～330：25 min.
390～820：20 min.
101：15 min.
LB3218
LB2012
LB2518
LB2016
LB1608
LBMF1608
LBC2518
LBC2016
LBC2012
LBC3225
LBR2518
LBR2012
CB2518
CB2016
CB2012
Inductance change:Within±10％
No significant abnormality in appearance.
CBC2016
CBC2012
CBC2518
CBC3225
CBL2012
CBMF1608
LBM2016
【Test Methods and Remarks】
LEM・LB・LBC・LBR・CB・CBC・CBL・LBM・LBMF・CBMF：Temperature：60±2℃
Humidity：90～95％RH
Duration：1000 hrs
Applied current：Rated current
Recovery：At least 2 hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs.
LEM：Recovery
At least 1 hr of recovery under the standard condition after the test, followed by the measurement within 2 hrs.
21.High temperature life test
LEM2520
Inductance change :Within±10％
Q→ R12～4R7：30 min.
5R6～330：25 min.
390～820：20 min.
101：15 min.
LB3218
LB2012
LB2518
LB2016
LB1608
LBMF1608
LBC2016
LBC2012
LBC3225
LBC2518
LBR2518
LBR2012
CB2518
CB2016
CB2012
CBC2518
CBC2016
CBC2012
CBC3225
CBL2012
No significant abnormality in appearance.
Inductance change:Within±10％
CBMF1608
LBM2016
【Test Methods and Remarks】
LEM・CB・CBC・CBL・LBM・CBMF：Temperature：85±2℃
Duration：1000 hrs
Recovery：At least 2 hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs.
LEM：Recovery
At least 1 hr of recovery under the standard condition after the test, followed by the measurement within 2 hrs.
22.Loading at high temperature
LEM2520
LB3218
LB2518
LB2016
LB2012
LB1608
LBMF1608
LBC2518
LBC2016
LBC2012
LBC3225
Inductance change:Within±10％
No significant abnormality in appearance.
LBR2518
LBR2012
CB2016
CB2012
CB2518
CBC2518
CBC2016
CBC2012
CBC3225
CBL2012
CBMF1608
LBM2016
【Test Methods and Remarks】
LB・LBC・LBR・LBMF：Temperature：85±2℃
Duration：1000 hrs
Applied current：Rated current
Recovery：At least 2 hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs.
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound0103_reli-PRP6
1
wound0103_reli_e-01
■ RELIABILITY DATA
23.Low temperature life test
Inductance change :Within±10％
Q→ R12～4R7：30 min.
5R6～330：25 min.
390～820：20 min.
101：15 min.
LEM2520
LB3218
LB2012
LB2518
LB2016
LB1608
LBMF1608
LBC2518
LBC2016
LBC2012
LBC3225
LBR2518
LBR2012
CB2518
CB2016
CB2012
Inductance change:Within±10％
CBC2016
CBC2012
CBC2518
CBC3225
CBL2012
CBMF1608
LBM2016
【Test Methods and Remarks】
LEM・LB・LBC・LBR・CB・CBC・CBL・LBM・LBMF・CBMF
Temperature：－40±2℃
Duration：1000 hrs
Recovery：At least 2 hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs.
LEM：Recovery
At least 1 hr of recovery under the standard condition after the test, followed by the measurement within 2 hrs.
24.Standard condition
LEM2520
LB3218
LB2518
LBC3225
LBC2518
LBR2518
LBR2012
CB2518
CB2016
CBC2518
CBC3225
CBL2012
CBMF1608
LBM2016
LB2016
LBC2016
LB2012
LBC2012
CB2012
CBC2016
CBC2012
LB1608
LBMF1608
No significant abnormality in appearance.
Standard test conditions
Unless specified, Ambient temperature is 20±15℃ and the Relative humidity is 65±
20％. If there is any doubt about the test results, further measurement shall be had
within the following limits:
Ambient Temperature: 20±2℃
Relative humidity: 65±5％
Inductance value is based on our standard measurement systems.
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound0103_reli_e-01
1
wound0103_reli-PRP7
■ PRECAUTIONS
LEM Type，LB Type，CB Type
1．Circuit Design
◆Operating environment
1．The products described in this specification are intended for use in general electronic equipment,(office supply equipment, telecommunications systems,
measuring equipment, and household equipment). They are not intended for use in mission-critical equipment or systems requiring special quality and high
Precautions
reliability (traffic systems, safety equipment, aerospace systems, nuclear control systems and medical equipment including life-support systems,) where product
failure might result in loss of life, injury or damage. For such uses, contact TAIYO YUDEN Sales Department in advance.
2．PCB Design
◆Land pattern design
Precautions
1．Please contact any of our offices for a land pattern, and refer to a recommended land pattern of a right figure or specifications.
PRECAUTIONS
Unit : mm
【Recommended Land Patterns】
TYPE
A
B
C
Surface Mounting
・Mounting and soldering conditions should be checked beforehand.
1608
0.55
0.7
1.0
・Applicable soldering process to those products is reflow soldering only.
MF1608
0.55
0.8
0.9
・Recommended Land Patterns
Technical
2012
0.7
0.8
1.45
consider2016
0.7
0.8
1.8
ations
2518
0.8
1.2
2.0
C
LEM2520
0.9
1.5
1.5
3218
1.0
1.6
2.0
3225
1.0
1.6
2.7
A
B
A
3．Considerations for automatic placement
◆Adjustment of mounting machine
Precautions
1. Excessive impact load should not be imposed on the products when mounting onto the PC boards.
2. Mounting and soldering conditions should be checked beforehand.
Technical
consider- 1. When installing products, care should be taken not to apply distortion stress as it may deform the products.
ations
4．Soldering
◆Wave soldering（LEM Type only）
1．For wave soldering,please apply conditions meeting the range of the specifed conditions in our catalog or the relevant specifications.
◆Reflow soldering（LB and CB Types）
1．For reflow soldering with either leaded or lead-free solder,the profile specified in "point for controlling" is recommended.
Precautions ◆Reflow soldering（LEM）
1．For reflow soldering, please apply conditions meeting the range of the specified conditions in our catalog or the relevant specifications.
◆Recommended conditions for using a soldering iron
1．Put the soldering iron on the land-pattern. Soldering iron's temperature-Below 350℃ Duration-3 secons or less. The soldering iron shoud not come in contact
with inductor directly.
◆Wave soldering（LEM Type only）
1．Components can be damaged by excessive heat where soldering conditions exceed the specified range.
◆Reflow soldering（LB and CB Types）
1．Reflow profile
300
（LB・CB Type）
Peak Temp: 260＋0/ー5℃
5 sec Max
250
Technical
considerations
200
180℃
230℃ Minn
Pre-heat zone
150 150℃
100
90±30 sec
30±10 sec
50
0
◆Recommended conditions for using a soldering iron
1．Components can be damaged by excessive heat where soldering conditions exceed the specified range.
5．Cleaning
Precautions
Technical
considerations
◆Cleaning conditions
1．LEM Type, LB Type, CB Type
Washing by supersonic waves shall be avoided.
◆Cleaning conditions
1．LEM Type, LB Type, CB Type
If washing by supersonic waves, supersonic waves may cause broken products.
6．Handling
◆Handling
1．Keep the inductors away from all magnets and magnetic objects.
◆Breakaway PC boards（splitting along perforations）
1．When splitting the PC board after mounting inductors, care should be taken not to give any stresses of deflection or twisting to the board.
Precautions
2．Board separation should not be done manually, but by using the appropriate devices.
◆Mechanical considerations
1．Please do not give the inductors any excessive mechanical shocks.
◆Handling
1．There is a case that a characteristic varies with magnetic influence.
Technical
◆Breakaway PC boards（splitting along perforations）
consider1．Planning pattern configurations and the position of products should be carefully performed to minimize stress.
ations
◆Mechanical considerations
1．There is a case to be damaged by a mechanical shock.
7．Storage conditions
◆Storage
1．To maintain the solderability of terminal electrodes and to keep the packing material in good condition, temperature and humidity in the storage area should be controlled.
・Recommended conditions
Ambient temperature：0～40℃　／　Humidity：Below 70% RH
Precautions
The ambient temperature must be kept below 30℃ Even under ideal storage conditions, solderability of products electrodes may decrease as time passes. For
this reason, LE type inductors should be used within one year from the time of delivery.
LB type：Should be used within 6 months from the time of delivery.
LE type：In case of storage over 6 months, solderability shall be checked before actual usage.
Technical ◆Storage
1．Under a high temperature and humidity environment, problems such as reduced solderability caused by oxidation of terminal electrodes and deterioration of
considerations
taping/packaging materials may take place.
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound0103_reli-PRP8
1
wound0103_reli_e-01
SMD INDUCTORS LOW PROFILE TYPE
REFLOW
■ FEATURES
■ APPLICATIONS
◦Small and Low profile inductor.
◦For small DC/DC converter
(cellular Phone, HDD, DVC, DSC, PDA, LCD display etc).
◦It corresponds to High current.
◦Simple and original magnetic shield structure.
◦Durable structure against dropping impact.
■ ORDERING CODE
R △ 4
N
0
❶
NR△, NRG
1
8
❷
3010
3012
3015
4010
4012
4018
0
❸
❶Type
Coating resin specification
T△
△＝Blank Space
example
T △ 1
M △
0
❹
❸Packaging
Tape & Reel
❹Nominal inductance
〔μH〕
example
△＝Blank Space
2R2
100
101
❷External dimensions (W×L×H)
4026
4.0×4.0×2.6mm
3.0×3.0×1.0mm
5040
5.0×5.0×4.0mm
3.0×3.0×1.2mm
6012
6.0×6.0×1.2mm
3.0×3.0×1.5mm
6020
6.0×6.0×2.0mm
4.0×4.0×1.0mm
6028
6.0×6.0×2.8mm
4.0×4.0×1.2mm
6045
6.0×6.0×4.5mm
4.0×4.0×1.8mm
8040
8.0×8.0×4.0mm
❺
❻
❺Inductance tolerance
M
±20%
N
±30%
△
❻Internal code
Standard product
△＝Blank Space
2.2
10
100
※R＝decimal point
■ EXTERNAL DIMENSIONS/STANDARD QUANTITY
ℓ
H
L
H
L
W
f
f
W
e
e
Δe
e
e
Type
L
W
H
e
Standard
Quantity [pcs]
Tape & Reel
f
Type
L
W
H
e
Δe
＊3）
4.1max
4.9±0.2
4.9±0.2 （0.161max） 1.2±0.2
0.3±0.2
3.3±0.2
1.3±0.3
（0.193±0.008） （0.193±0.008） ＊4）4.0max （0.047±0.008） （0.011±0.008） （0.130±0.008） （0.051±0.011）
（0.157max）
NR3010
1.0 max
（0.039 max）
2000
NR3012
1.2 max
0.9±0.2
3.0±0.1
3.0±0.1
1.9±0.2
（0.118±0.004） （0.118±0.004） （0.047 max） （0.035±0.008）（0.075±0.008）
2000
NR3015
1.5 max
（0.059 max）
2000
NR4010
1.0 max
（0.039 max）
5000
NR6020
1.35±0.2
0.3±0.2
4.0±0.2
6.0±0.2
6.0±0.2
2.0 max
（0.236±0.008） （0.236±0.008） （0.078 max） （0.053±0.008） （0.011±0.008） （0.157±0.008）
NR4012
1.2 max
（0.047 max）
4500
NR6028
1.35±0.2
0.3±0.2
4.0±0.2
6.0±0.2
6.0±0.2
2.8 max
（0.236±0.008） （0.236±0.008） （0.110 max） （0.053±0.008） （0.011±0.008） （0.157±0.008）
NR6045
1.35±0.2
0.3±0.2
4.0±0.2
6.0±0.2
6.0±0.2
4.5 max
（0.236±0.008） （0.236±0.008） （0.177 max） （0.053±0.008） （0.011±0.008） （0.157±0.008）
NR4018
4.0±0.2
（0.157±
0.008）
NRG4026
4.0±0.2
（0.157±
0.008）
1.1±0.2
2.5±0.2
1.8 max （0.043±0.008）（0.098±0.008）
（0.071 max）
2.6 max
（0.102 max）
2000
*1）4.2max
8.0±0.2
8.0±0.2 （0.165max） 1.6±0.3
5.6±0.3
NR8040
（0.315±0.008）（0.315±0.008） *2）4.0max （0.063±0.012）（0.220±0.012）
（0.157max）
*1）0R9～6R8 Type
*2）100～101 Type
3500
NR5040
Δℓ
f
6.0±0.2
6.0±0.2
1.2 max
1.35±0.2
0.3±0.2
4.0±0.2
NR6012
（E Type） （0.236±0.008） （0.236±0.008） （0.047 max） （0.053±0.008） （0.011±0.008） （0.157±0.008）
Standard
Quantity [pcs]
Tape & Reel
1500
1000
2.3±0.3
（0.091±0.011）
*3）1R5～100 Type
*4）150～470 Type
2500
2000
1500
Unit : mm (inch)
1000
Unit : mm (inch)
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
122
1
wound04_e-01
Recommended Land Patterns
【NR4010, NR4012, NR4018, NRG4026】
【NR3010, NR3012, NR3015】
【NR5040】
2.8
2.2
【NR6012,NR6020,NR6028,NR6045】
3.6
【NR8040】
5.6
4.7
2.7
3.7
0.8
4.0
0.8
1.2
1.2
1.5
5.7
7.5
1.5
1.6
1.6
1.8
1.8
Unit : mm
■ AVAILABLE INDUCTANCE RANGE
Range
Type
NR 3010
0.8
1300
1.0
3.3
10
47
NR 3012
NR 3015
NR 4010
NR 4012
NR 4018
Rdc±20％ IMAX
［Ω］ [mA]
Rdc±20％ IMAX
［Ω］ [mA]
Rdc±20％ IMAX
［Ω］ [mA]
Rdc±20％ IMAX
［Ω］ [mA]
Rdc±20％ IMAX
［Ω］ [mA]
0.065 1490
0.05 2100
0.030 1050
0.100 1500
0.060 1830
NR 5040
Rdc±20％ IMAX
［Ω］ [mA]
0.450 540
0.290 700
0.230 560
0.380 740
220
2.05 250
1.45 300
1.34 240
1.81 350
100
220
0.240 840
0.180 2100
1.00
900
170
NR 6020
Rdc±20％ IMAX
［Ω］ [mA]
3800
0.030
3600
500
NR 6012
Rdc±30％ IMAX
［Ω］ [mA]
0.020
1730
0.056 1000
4.00
NR 6045
NR 8040
Rdc±30％ IMAX
［Ω］ [mA]
Rdc±30％ IMAX
［Ω］ [mA]
0.013 4200
0.014 7800
0.235 1400
950
2.18
0.125 1900
NRG 4026
Rdc±30％ IMAX
［Ω］ [mA]
Rdc±30％
［Ω］
0.006
0.095
0.310
320
NR 6028
Rdc±20％ IMAX
［Ω］ [mA]
0.020 4600
2300
0.030
0.085
0.065 2500
0.047 3100
0.034 1300
0.600 700
0.500 1000
0.290
0.290
650
620
0.300
FERRITE PRODUCTS
Inductance［μH］
IMAX
[mA]
■ PART NUMBERS
●NR 3010 Shielded type
Ordering code
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
3010T
3010T
3010T
3010T
3010T
3010T
3010T
3010T
3010T
3010T
3010T
1R0N
1R5N
2R2M
3R3M
4R7M
6R8M
100M
150M
220M
330M
470M
EHS (Environmental
Hazardous
Substances)
Inductance
[μH]
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
1.5
2.2
3.3
4.7
6.8
10
15
22
33
47
EHS (Environmental
Hazardous
Substances)
Inductance
[μH]
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
1.5
2.2
3.3
4.7
6.8
10
15
22
33
47
EHS (Environmental
Hazardous
Substances)
Inductance
[μH]
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
1.5
2.2
3.3
4.7
6.8
10
15
22
33
47
Inductance
Tolerance
±30％
±20％
Self-resonant
frequency
〔MHz〕(min.)
DC Resistance
[Ω] (±20％)
126
98
82
63
56
46
35
30
25
20
17
0.065
0.080
0.095
0.140
0.190
0.300
0.450
0.740
1.03
1.55
2.05
Self-resonant
frequency
〔MHz〕(min.)
DC Resistance
[Ω] (±20％)
110
92
70
55
48
40
32
27
22
19
17
0.050
0.060
0.080
0.100
0.130
0.190
0.290
0.450
0.630
1.03
1.45
Self-resonant
frequency
〔MHz〕(min.)
DC Resistance
[Ω] (±20％)
100
87
64
49
40
36
28
23
20
18
17
0.030
0.040
0.060
0.080
0.120
0.160
0.230
0.360
0.520
0.840
1.34
〔mA〕
Rated current ※）
Saturation current Temperature rise current
Idc2
Idc1
1,300
1,400
1,300
1,200
1,100
1,100
870
940
750
780
610
630
500
510
400
400
350
350
260
275
220
235
Measuring
frequency
〔kHz〕
〔mA〕
Rated current ※）
Saturation current Temperature rise current
Idc1
Idc2
1,500
1,490
1,400
1,360
1,100
1,200
910
1,050
770
980
670
740
540
630
440
485
375
420
310
330
250
280
Measuring
frequency
〔kHz〕
〔mA〕
Rated current ※）
Saturation current Temperature rise current
Idc1
Idc2
2,100
2,100
1,820
1,800
1,480
1,500
1,210
1,230
1,020
1,040
870
880
700
710
560
560
470
470
390
370
320
300
Measuring
frequency
〔kHz〕
100
●NR 3012 Shielded type
Ordering code
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
3012T
3012T
3012T
3012T
3012T
3012T
3012T
3012T
3012T
3012T
3012T
1R0N
1R5N
2R2M
3R3M
4R7M
6R8M
100M
150M
220M
330M
470M
Inductance
Tolerance
±30％
±20％
100
●NR 3015 Shielded type
Ordering code
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
3015T
3015T
3015T
3015T
3015T
3015T
3015T
3015T
3015T
3015T
3015T
1R0N
1R5N
2R2M
3R3M
4R7M
6R8M
100M
150M
220M
330M
470M
Inductance
Tolerance
±30％
±20％
100
※）The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20℃)
※）The temperature rise current value
（Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃)
※）The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value.
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound04_e-01
1
123
■ PART NUMBERS
●NR 4010 Shielded type
EHS (Environmental
Hazardous
Substances)
Inductance
[μH]
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
2.2
3.3
4.7
6.8
10
15
22
33
47
EHS (Environmental
Hazardous
Substances)
Inductance
[μH]
Inductance
Tolerance
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
2.2
3.3
4.7
6.8
10
15
22
33
47
±30％
Ordering code
EHS (Environmental
Hazardous
Substances)
Inductance
[μH]
Inductance
Tolerance
NR 4018T 1R0N
NR 4018T 2R2M
NR 4018T 3R3M
NR 4018T 4R7M
NR 4018T 6R8M
NR 4018T 100M
NR 4018T 150M
NR 4018T 220M
NR 4018T 330M
NR 4018T 470M
NR 4018T 680M
NR 4018T 101M
NR 4018T 151M
NR 4018T 221M
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
2.2
3.3
4.7
6.8
10
15
22
33
47
68
100
150
220
±30％
Ordering code
EHS (Environmental
Hazardous
Substances)
Inductance
[μH]
Inductance
Tolerance
NR 5040T 1R5N
NR 5040T 2R2N
NR 5040T 3R3N
NR 5040T 4R7N
NR 5040T 6R8M
NR 5040T 100M
NR 5040T 150M
NR 5040T 220M
NR 5040T 330M
NR 5040T 470M
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.5
2.2
3.3
4.7
6.8
10
15
22
33
47
Ordering code
EHS (Environmental
Hazardous
Substances)
Inductance
[μH]
NR 6012T 2R5NE
NR 6012T 4R0NE
NR 6012T 5R3ME
NR 6012T 6R8ME
NR 6012T 100ME
NR 6012T 150ME
NR 6012T 220ME
NR 6012T 330ME
NR 6012T 470ME
NR 6012T 680ME
NR 6012T 101ME
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
2.5
4.0
5.3
6.8
10
15
22
33
47
68
100
Ordering code
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
4010T
4010T
4010T
4010T
4010T
4010T
4010T
4010T
4010T
4010T
1R0N
2R2N
3R3M
4R7M
6R8M
100M
150M
220M
330M
470M
Inductance
Tolerance
±30％
±20％
Self-resonant
frequency
〔MHz〕(min.)
DC Resistance
[Ω] (±20％)
116
73
58
47
38
31
24
19
15
13
0.100
0.150
0.180
0.210
0.300
0.380
0.510
0.870
1.54
1.81
Self-resonant
frequency
〔MHz〕(min.)
DC Resistance
[Ω] (±20％)
131
66
50
45
35
28
23
18
15
12
0.060
0.090
0.130
0.140
0.180
0.240
0.400
0.480
0.810
1.00
Self-resonant
frequency
〔MHz〕(min.)
DC Resistance
[Ω] (±20％)
80
52
44
34
29
24
19
16
12
10
8.3
6.5
5.5
4.0
0.030
0.060
0.070
0.090
0.110
0.180
0.250
0.360
0.530
0.650
1.00
1.50
2.50
4.00
Self-resonant
frequency
〔MHz〕(min.)
DC Resistance
[Ω] (±30％)
60
42
32
28
21
18
13
9
7
6
0.020
0.022
0.027
0.029
0.049
0.056
0.080
0.126
0.180
0.310
Self-resonant
frequency
〔MHz〕(min.)
DC Resistance
[Ω] (±20％)
45
39
34
30
22
18
12
8
6
3
1
0.090
0.105
0.125
0.165
0.235
0.330
0.530
0.700
1.05
1.35
2.18
〔mA〕
Rated current ※）
Saturation current Temperature rise current
Idc1
Idc2
1,800
1,050
890
1,150
1,100
820
900
750
740
620
560
600
470
510
360
400
280
300
240
280
Measuring
frequency
〔kHz〕
〔mA〕
Rated current ※）
Saturation current Temperature rise current
Idc1
Idc2
2,500
1,500
1,650
1,200
1,200
980
1,050
960
900
840
740
770
560
600
510
540
400
420
350
370
Measuring
frequency
〔kHz〕
〔mA〕
Rated current ※）
Saturation current Temperature rise current
Idc1
Idc2
4,000
1,830
2,700
1,440
2,000
1,230
1,700
1,200
1,450
1,060
1,200
840
940
650
800
590
650
490
570
420
470
320
400
270
310
220
270
170
Measuring
frequency
〔kHz〕
〔mA〕
Rated current ※）
Saturation current Temperature rise current
Idc1
Idc2
6,000
3,600
4,600
3,500
3,800
3,300
3,300
3,100
2,600
2,300
2,300
2,100
2,000
1,800
1,600
1,400
1,300
1,200
1,100
900
Measuring
frequency
〔kHz〕
〔mA〕
Rated current ※）
Saturation current Temperature rise current
Idc1
Idc2
2,100
1,730
1,800
1,570
1,500
1,400
1,300
1,180
1,000
1,000
800
790
760
630
590
530
520
460
440
410
350
320
Measuring
frequency
〔kHz〕
100
●NR 4012 Shielded type
Ordering code
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
4012T
4012T
4012T
4012T
4012T
4012T
4012T
4012T
4012T
4012T
1R0N
2R2M
3R3M
4R7M
6R8M
100M
150M
220M
330M
470M
±20％
100
●NR 4018 Shielded type
±20％
100
●NR 5040 Shielded type
±30％
±20％
100
●NR 6012 Shielded type
Inductance
Tolerance
±30％
±20％
100
※）The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20℃)
※）The temperature rise current value (Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃)
※）The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value.
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
124
1
wound04_e-01
■ PART NUMBERS
●NR 6020 Shielded type
Ordering code
EHS (Environmental
Hazardous
Substances)
Inductance
[μH]
NR 6020T 0R8N
NR 6020T 1R5N
NR 6020T 2R2N
NR 6020T 3R3N
NR 6020T 4R7N
NR 6020T 6R8N
NR 6020T 100M
NR 6020T 220M
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
0.8
1.5
2.2
3.3
4.7
6.8
10
22
Ordering code
EHS (Environmental
Hazardous
Substances)
Inductance
[μH]
NR 6028T 0R9N
NR 6028T 1R5N
NR 6028T 2R2N
NR 6028T 3R0N
NR 6028T 4R7M
NR 6028T 6R0M
NR 6028T 100M
NR 6028T 150M
NR 6028T 220M
NR 6028T 330M
NR 6028T 470M
NR 6028T 680M
NR 6028T 101M
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
0.9
1.5
2.2
3.0
4.7
6.0
10
15
22
33
47
68
100
EHS (Environmental
Hazardous
Substances)
Inductance
[μH]
Inductance
Tolerance
±30％
±20％
Self-resonant
frequency
〔MHz〕(min.)
DC Resistance
[Ω] (±20％)
110
93
73
55
43
30
18
11
0.020
0.026
0.034
0.040
0.058
0.085
0.125
0.290
Self-resonant
frequency
〔MHz〕(min.)
DC Resistance
[Ω] (±30％)
90
78
68
55
39
30
20
17
12
10
8
5
3
0.013
0.016
0.020
0.023
0.031
0.040
0.065
0.095
0.135
0.220
0.300
0.420
0.600
Self-resonant
frequency
〔MHz〕(min.)
DC Resistance
[Ω] (±30％)
〔mA〕
Rated current ※）
Saturation current Temperature rise current
Idc1
Idc2
5,500
3,800
4,000
3,200
3,200
2,700
2,800
2,600
2,400
2,000
2,000
1,800
1,700
1,400
1,050
950
Measuring
frequency
〔kHz〕
〔mA〕
Rated current ※）
Saturation current Temperature rise current
Idc1
Idc2
6,600
4,600
5,000
4,200
4,200
3,700
3,600
3,400
2,700
3,000
2,500
2,500
1,900
1,900
1,600
1,800
1,300
1,400
1,100
1,100
950
920
760
770
620
660
Measuring
frequency
〔kHz〕
〔mA〕
Rated current ※）
Saturation current Temperature rise current
Idc2
Idc1
Measuring
frequency
〔kHz〕
100
●NR 6028 Shielded type
Inductance
Tolerance
±20％
100
FERRITE PRODUCTS
±30％
●NR 6045 Shielded type
Ordering code
NR 6045T 1R0N
NR 6045T 1R3N
NR 6045T 1R8N
NR 6045T 2R3N
NR 6045T 3R0N
NR 6045T 4R5M
NR 6045T 6R3M
NR 6045T 100M
NR 6045T 150M
NR 6045T 220M
NR 6045T 330M
NR 6045T 470M
NR 6045T 680M
NR 6045T 101M
Inductance
Tolerance
RoHS
1.0
110
0.014
8,500
4,200
RoHS
1.3
95
0.016
8,000
4,000
±30％
RoHS
1.8
80
0.018
7,000
3,700
RoHS
2.3
60
0.021
6,000
3,500
RoHS
3.0
45
0.024
5,000
3,200
RoHS
4.5
25
0.031
4,000
3,000
RoHS
6.3
15
0.038
3,800
2,800
RoHS
10
12
0.047
3,000
2,500
RoHS
15
10
0.077
2,300
1,900
±20％
RoHS
22
7
0.115
1,900
1,500
RoHS
33
6
0.145
1,500
1,400
RoHS
47
5
0.220
1,300
1,100
RoHS
68
4
0.330
1,000
900
RoHS
100
3
0.500
800
700
EHS (Environmental
Hazardous
Substances)
Inductance
[μH]
Self-resonant
frequency
〔MHz〕(min.)
DC Resistance
[Ω] (±30％)
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
0.9
1.4
2.0
3.6
4.7
6.8
10
15
22
33
47
68
100
85
63
50
34
30
24
22
16
13
12
8
7
6
0.006
0.007
0.009
0.015
0.018
0.025
0.034
0.050
0.066
0.100
0.150
0.230
0.290
100
●NR 8040 Shielded type
Ordering code
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
8040T
8040T
8040T
8040T
8040T
8040T
8040T
8040T
8040T
8040T
8040T
8040T
8040T
0R9N
1R4N
2R0N
3R6N
4R7N
6R8N
100M
150M
220M
330M
470M
680M
101M
Inductance
Tolerance
±30％
±20％
〔mA〕
Rated current ※）
Saturation current Temperature rise current
Idc1
Idc2
11,000
7,800
9,000
7,000
6,300
7,400
4,900
5,300
4,100
4,700
3,700
4,000
3,400
3,100
2,400
2,700
2,200
2,200
1,700
1,900
1,400
1,500
1,100
1,200
1,000
1,000
Measuring
frequency
〔kHz〕
100
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound04_e-01
1
125
■ PART NUMBERS
●NRG 4026 Shielded type
Ordering code
Inductance
[μH]
NRG4026 T 1R2N
1.2
NRG4026 T 2R3N
2.3
NRG4026 T 3R5M
3.5
Inductance
Tolerance
±30％
〔mA〕
Rated current ※）
Saturation current Temperature rise current
Idc1
Idc2
Self-resonant
frequency
〔MHz〕(min.)
DC Resistance
[Ω] (±30%)
120
0.030
3,100
96
0.040
2,100
1,970
58
0.050
1,800
1,700
1,600
2,300
NRG4026 T 4R7M
4.7
46
0.055
1,450
NRG4026 T 6R6M
6.6
33
0.065
1,300
1,500
NRG4026 T 100M
10
26
0.085
1,000
1,300
NRG4026 T 150M
15
19
0.110
900
1,100
±20％
Measuring
frequency
〔kHz〕
NRG4026 T 220M
22
13
0.165
610
900
NRG4026 T 330M
33
9
0.200
540
800
NRG4026 T 470M
47
6
0.300
410
650
100
※）The saturation current (Idc1) is DC current value Inductance decrease down to 30%. (at 20℃)
※）
The temperature rise current value (Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃)
※）The rated current is Idc2.
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
126
1
wound04_e-01
■ ELECTRICAL CHARACTERISTICS
■ DC Bias characteristics
（Measured by HP4285A）
NR 3010
NR 3012
10
4R7M
Inductance
〔μH〕
100M
100M
10
2R2M
1
10
10,000
100M
4R7M
2R2N
2R2M
100
1,000
1
10
10,000
100
DC Bias
〔mA〕
NR 4012
1,000
1
10
10,000
100
10,000
NR 6012
（E Type）
NR 5040
1000
1,000
DC Bias
〔mA〕
DC Bias
〔mA〕
NR 4018
100
10
1000
100
470M
470M
221M
100M
470M
220M
10
4R7M
100
220M
Inductance
〔μH〕
10
101M
Inductance
〔μH〕
Inductance
〔μH〕
Inductance
〔μH〕
100
220M
10
100M
N
100M
101M
FERRITE PRODUCTS
1,000
DC Bias
〔mA〕
100M
220M
4R7M
4R7M
100
470M
220M
2R2M
1
10
100
470M
220M
Inductance
〔μH〕
Inductance
〔μH〕
220M
10
100
470M
470M
NR 4010
NR 3015
100
Inductance
〔μH〕
100
470M
220M
10
100M
4R7N
5R3M
4R7M
2R2N
2R2M
100
1,000
1
10
10,000
100
DC Bias
〔mA〕
NR 6020
100
1
10
10,000
100
Inductance
〔μH〕
100M
4R7M
2R2M
100
101M
470M
470M
100M
4R7
1,000
10,000
NR 8040
1000
101M
220M
10
100
DC Bias
〔mA〕
1000
Inductance
〔μH〕
100
1
10
10,000
NR 6045
NR 6028
220M
1,000
DC Bias
〔mA〕
1000
10
Inductance
〔μH〕
1,000
DC Bias
〔mA〕
100
Inductance
〔μH〕
1
10
2R2M
220M
10
100M
4R5N
101M
470M
220M
10
100M
4R7N
1
0R8N
1
2R3N
2R2
0.1
10
100
1,000
10,000
0.1
10
1
1R0N
100
1,000
10,000
0.1
10
100
DC Bias
〔mA〕
DC Bias
〔mA〕
2R0N
1
0R9
0R9N
1,000
DC Bias
〔mA〕
10,000
100,000
0.1
10
100
1,000
10,000
100,000
DC Bias
〔mA〕
NRG 4026
100
Inductance
〔μH〕
470M
220M
10
100M
4R7M
2R3N
1
10
100
1,000
10,000
DC Bias
〔mA〕
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound04_e-01
1
127
SMD INDUCTORS SMALL AND LARGE CURRENT TYPE
REFLOW
■ FEATURES
■ APPLICATIONS
◦Small and Low profile inductor.
◦For small DC/DC converter
(cellular Phone, HDD, DVC, DSC, PDA, LCD display etc).
◦It corresponds to High current.
◦Simple and original magnetic shield structure.
◦Durable structure against dropping impact.
■ ORDERING CODE
N
R
H
2
4
❶
1
T △ 1
0
❷
❶Type
NRH
NRS Coating resin specification
NRV
❸
❷External dimensions
（W×L×H）
T△
M ○ ○ ○
0
❹
❸Packaging
Tape & Reel
example
2410
3010
3012
5012
5014
5020
6010
0
❺
❺Inductance tolerance
M
±20%
N
±30%
❹Nominal inductance
〔μH〕
example
△＝Blank Space
2.4×2.4×1.0mm
3.0×3.0×1.0mm
3.0×3.0×1.2mm
5.0×5.0×1.2mm
5.0×5.0×1.4mm
5.0×5.0×2.0mm
6.0×6.0×1.0mm
2R2
100
101
❻
2.2
10
100
❻Internal code
○○○ Standard products
○＝Blank Space
※R＝decimal point
■ EXTERNAL DIMENSIONS/STANDARD QUANTITY
Δℓ
H
L
H
L
Δe
e
e
W
f
f
W
e
Type
L
W
H
e
f
e
Standard
Quantity [pcs]
Tape & Reel
Type
2500
NRS5012
2000
NRS5014
2000
NRS5020
2.4±0.1
2.4±0.1
1.0 max
0.6±0.2
1.45±0.2
（0.095±0.004）（0.095±0.004）（0.039 max）（0.024±0.008）（0.057±0.008）
1.0 max
NRH3010
3.0±0.1 （0.039 max） 0.9±0.2
1.9±0.2
3.0±0.1
NRH3012 （0.118±0.004） （0.118±0.004） 1.2 max （0.035±0.008）（0.075±0.008）
NRV3012
（0.047 max）
NRH2410
Unit：mm
（inch）
NRS6010
L
W
H
Δe
Δe
e
Δℓ
f
1.2 max
（0.047 max）
4.9±0.2
4.9±0.2
1.4 max
1.2±0.2
0.3±0.2
3.3±0.2
1.3±0.3
（0.193±0.008） （0.193±0.008） （0.055 max） （0.047±0.008） （0.011±0.008） （0.130±0.008） （0.051±0.011）
2.0 max
（0.079 max）
0.3±0.2
4.0±0.2
2.3±0.3
6.0±0.2
6.0±0.2
1.0 max
1.35±0.2
（0.236±0.008）（0.236±0.008） （0.039 max） （0.053±0.008） （0.011±0.008） （0.157±0.008） （0.091±0.011）
Recommended Land Patterns
【NRH2410】
【NRS5012, NRS5014, NRS5020】
800
1000
4.7
2.7
4.0
0.7
1000
【NRS6010】
3.6
2.2
2.0
0.7
1000
Unit：mm
（inch）
【NR3010, NRH3012, NRV3012】
1.45
Standard
Quantity [pcs]
Tape & Reel
0.8
5.7
0.8
1.5
1.5
1.6
1.6
■ AVAILABLE INDUCTANCE RANGE
Range
Type
NRH2410
Inductance［μH］
Imax
[mA]
1.0
1410
2.2
4.7
10
22
450
300
NRH3010
NRH3012
Rdc±20％ Imax
［Ω］[mA]
Rdc±20％ Imax
［Ω］[mA]
0.070 1480
0.065 1710
NRV3012
Rdc±20％ Imax
［Ω］[mA]
0.048
0.350 720
0.770
0.270
500
0.630
NRS5014
Rdc±20％ Imax
［Ω］[mA]
2300
1100
0.690 600
1.47 380
NRS5012
Rdc±20％ Imax
［Ω］[mA]
NRS5020
Rdc±20％ Imax
［Ω］[mA]
3600
0.053
2800
0.045
1800
0.100
NRS6010
Rdc±20％ Imax
［Ω］[mA]
Rdc±20％
［Ω］
0.021
1900
0.090
1300
0.120 1000
0.270
900
0.260
0.120
850
0.420
100
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
128
1
wound05_e-01
■ PART NUMBERS
●NRH 2410 Shielded type
Ordering code
NRH2410T
NRH2410T
NRH2410T
NRH2410T
NRH2410T
NRH2410T
NRH2410T
NRH2410T
NRH2410T
NRH2410T
R68NN 4
1R0NN 4
1R5MN
2R2MN
3R3MN
4R7MN
6R8MN
100MN
150MN
220MN
Self-resonant
frequency
〔MHz〕(min.)
DC Resistance
[Ω] (±20%)
120
106
94
77
56
50
43
32
27
22
0.060
0.070
0.110
0.150
0.220
0.290
0.410
0.690
1.02
1.47
Self-resonant
frequency
〔MHz〕(min.)
DC Resistance
[Ω] (±20%)
120
99
86
64
50
44
34
25
22
0.065
0.075
0.083
0.130
0.170
0.250
0.350
0.550
0.770
Self-resonant
frequency
〔MHz〕(min.)
DC Resistance
[Ω] (±20％)
111
95
78
61
50
43
32
26
22
0.048
0.055
0.075
0.100
0.130
0.190
0.270
0.450
0.630
Inductance
Tolerance
Self-resonant
frequency
〔MHz〕(min.)
DC Resistance
[Ω] (±20％)
2.2
±20％
70
0.120
EHS (Environmental
Hazardous
Substances)
Inductance
[μH]
Inductance
Tolerance
Self-resonant
frequency
〔MHz〕(min.)
DC Resistance
[Ω] (±20％)
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
1.5
2.2
3.3
4.7
6.8
10
100
86
70
48
40
36
26
0.053
0.070
0.085
0.160
0.180
0.260
0.420
EHS (Environmental
Hazardous
Substances)
Inductance
[μH]
Self-resonant
frequency
〔MHz〕(min.)
DC Resistance
[Ω] (±20％)
EHS (Environmental
Hazardous
Substances)
Inductance
[μH]
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
0.68
1.0
1.5
2.2
3.3
4.7
6.8
10
15
22
EHS (Environmental
Hazardous
Substances)
Inductance
[μH]
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.2
1.5
2.2
3.3
4.7
6.8
10
15
22
EHS (Environmental
Hazardous
Substances)
Inductance
[μH]
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
1.5
2.2
3.3
4.7
6.8
10
15
22
EHS (Environmental
Hazardous
Substances)
Inductance
[μH]
RoHS
Inductance
Tolerance
±30％
±20％
〔mA〕
Rated current ※）
Saturation
Temperature rise
current
current
Idc1
Idc2
2,200
1,570
1,800
1,410
1,550
1,160
1,290
970
770
1,000
670
880
570
750
450
550
370
470
300
390
Measuring
frequency
〔kHz〕
100
●NRH 3010 Type
NRH3010T
NRH3010T
NRH3010T
NRH3010T
NRH3010T
NRH3010T
NRH3010T
NRH3010T
NRH3010T
1R2N
1R5N
2R2M
3R3M
4R7M
6R8M
100M
150M
220M
Inductance
Tolerance
±30％
±20％
〔mA〕
Rated current ※）
Saturation
Temperature rise
current
current
Idc1
Idc2
1,700
1,480
1,370
1,440
1,300
1,300
1,000
1,030
900
850
745
700
600
620
480
450
410
380
Measuring
frequency
〔kHz〕
100
FERRITE PRODUCTS
Ordering code
●NRH 3012 Type
Ordering code
NRH3012T
NRH3012T
NRH3012T
NRH3012T
NRH3012T
NRH3012T
NRH3012T
NRH3012T
NRH3012T
1R0N
1R5N
2R2M
3R3M
4R7M
6R8M
100M
150M
220M
Inductance
Tolerance
±30％
±20％
〔mA〕
Rated current ※）
Saturation
Temperature rise
current
current
Idc1
Idc2
2,200
1,710
1,600
1,700
1,500
1,370
1,200
1,210
1,060
1,000
890
850
730
720
570
530
500
500
Measuring
frequency
〔kHz〕
100
●NRV 3012 Type
Ordering code
NRV3012T 2R2M
〔mA〕
Rated current ※）
Saturation
Temperature rise
current
current
Idc1
Idc2
1,800
1,100
Measuring
frequency
〔kHz〕
100
●NRS 5012 Type
Ordering code
NRS5012T
NRS5012T
NRS5012T
NRS5012T
NRS5012T
NRS5012T
NRS5012T
1R0N
1R5N
2R2M
3R3M
4R7M
6R8M
100M
±30％
±20％
〔mA〕
Rated current ※）
Saturation
Temperature rise
current
current
Idc1
Idc2
4,500
2,300
2,200
3,800
3,100
2,000
1,450
2,400
1,400
2,200
1,100
1,700
850
1,400
Measuring
frequency
〔kHz〕
100
●NRS 5014 Type
Ordering code
NRS5014T 1R2N
NRS5014T 2R2N
NRS5014T 3R3N
NRS5014T 4R7N
RoHS
RoHS
RoHS
RoHS
Inductance
Tolerance
1.2
2.2
3.3
4.7
±30％
86
56
48
41
〔mA〕
Rated current ※）
Saturation
Temperature rise
current
current
Idc1
Idc2
0.045
3,800
2,800
0.065
2,800
2,300
0.080
0.100
2,350
2,100
2,050
1,800
Measuring
frequency
〔kHz〕
100
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound05_e-01
1
129
■ PART NUMBERS
●NRS 5020 Type
Ordering code
NRS5020T
NRS5020T
NRS5020T
NRS5020T
NRS5020T
NRS5020T
NRS5020T
NRS5020T
NRS5020T
1R0N
1R5N
2R2N
3R3N
4R7M
6R8M
100M
150M
220M
EHS (Environmental
Hazardous
Substances)
Inductance
[μH]
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
1.5
2.2
3.3
4.7
6.8
10
15
22
EHS (Environmental
Hazardous
Substances)
Inductance
[μH]
Inductance
Tolerance
±30％
±20％
Self-resonant
frequency
〔MHz〕(min.)
DC Resistance
[Ω] (±20％)
81
68
57
46
37
30
24
20
17
0.021
0.026
0.035
0.048
0.060
0.090
0.120
0.165
0.260
Self-resonant
frequency
〔MHz〕(min.)
DC Resistance
[Ω] (±20％)
90
65
50
38
30
25
0.090
0.110
0.135
0.165
0.220
0.270
〔mA〕
Rated current ※）
Saturation
Temperature rise
current
current
Idc1
Idc2
4,000
3,600
3,200
3,350
2,900
2,900
2,400
2,400
2,000
2,000
1,650
1,600
1,300
1,450
1,100
1,200
1,000
900
Measuring
frequency
〔kHz〕
100
●NRS 6010 Type
Ordering code
NRS6010T
NRS6010T
NRS6010T
NRS6010T
NRS6010T
NRS6010T
1R5N
2R2N
3R3N
4R7N
6R8N
100M
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Inductance
Tolerance
1.5
2.2
3.3
±30％
4.7
6.8
10
±20％
〔mA〕
Rated current ※）
Saturation
Temperature rise
current
current
Idc1
Idc2
2,400
1,900
1,900
1,700
1,600
1,500
1,300
1,400
1,200
1,200
1,000
1,100
Measuring
frequency
〔kHz〕
100
※）The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20℃)
※）The temperature rise current value (Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃)
※）The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value.
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
130
1
wound05_e-01
■ ELECTRICAL CHARACTERISTICS
■ DC Bias characteristics
（Measured by HP4285A）
NRH 2410
NRH 3010
220M
220M
4R7M
2R2M
1
220M
100M
4R7M
2R2M
1
1R0N
100
10
Inductance
〔μH〕
100M
NRV 3012
100
10
Inductance
〔μH〕
Inductance
〔μH〕
10
NRH 3012
100
10
Inductance
〔μH〕
100
100M
4R7M
2R2M
1
2R2M
1
1R0N
100
1,000
0.1
10
10,000
DC Bias
〔mA〕
100
1,000
0.1
10
10,000
100
DC Bias
〔mA〕
NRS 5012
1,000
0.1
10
10,000
DC Bias
〔mA〕
NRS 5014
100
NRS 5020
100
100
100
10
10
10
1,000
10,000
DC Bias
〔mA〕
NRS 6010
100
2R2M
1
4R7M
1
4R7M
2R2N
1
1R2N
100M
Inductance
〔μH〕
4R7M
10
100M
Inductance
〔μH〕
100M
Inductance
〔μH〕
Inductance
〔μH〕
200M
FERRITE PRODUCTS
0.1
10
4R7M
2R2N
1
1R0N
1R0N
0.1
10
100
1,000
DC Bias
〔mA〕
10,000
0.1
10
100
1,000
10,000
0.1
10
100
DC Bias
〔mA〕
1,000
DC Bias
〔mA〕
10,000
0.1
10
100
1,000
10,000
DC Bias
〔mA〕
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound05_e-01
1
131
■ PACKAGING
①Minimum Quantity
Type
NRH 2410
NR 3010/NRH 3010
NR 3012/NRH3012/NRV3012
NR 3015
NR 4010
NR 4012
NR 4018
NRG4026
NRS5012
NRS5014
NRS5020
NR 5040
NRS6010
NR 6012
NR 6020
NR 6028
NR 6045
NR 8040
Chip cavity
Type
Standard Quantity [pcs]
Tape ＆ Reel
2500
2000
2000
2000
5000
4500
3500
2000
1000
1000
800
1500
1000
1000
2500
2000
1500
1000
A
Insertion pitch
B
Tape thickness
F
T
K
1.4±0.1
（0.055±0.004）
NR 4010
NR 4012
NR 4018
1.6±0.1
（0.063±0.004）
4.3±0.1
4.3±0.1
（0.169±0.004）（0.169±0.004）
2.1±0.1
（0.083±0.004）
0.3±0.05
3.1±0.1
（0.012±0.002）（0.122±0.004）
NRG 4026
1.4±0.1
（0.055±0.004）
1.6±0.1
（0.063±0.004）
2.3±0.1
（0.091±0.004）
4.2±0.1
（0.165±0.004）
1.4±0.1
（0.055±0.004）
1.6±0.1
（0.063±0.004）
NRS 5012
NRS 5014
5.25±0.1
5.25±0.1
（0.207±0.004）（0.207±0.004）
8.0±0.1
（0.315±0.004）
5.15±0.1
5.15±0.1
NR 5040
（0.203±0.004）（0.203±0.004）
NRS 5020
NRS 6010
NR 6012
NR 6020
②Tape Material
0.4±0.1
（0.016±0.004） 2.3±0.1
（0.090±0.004）
6.3±0.1
6.3±0.1
（0.248±0.004）（0.248±0.004）
NR 6028
3.1±0.1
（0.122±0.004）
NR 6045
4.7±0.1
（0.185±0.004）
Unit : mm (inch)
◦Embossed tape 16mm wide (0.63 inches wide)
F
CHIP cavity
K
1.75±0.1
（0.069±0.004）
16.0±0.3
（0.630±0.012）
φ1.5±0.1
（0.059±0.004）
T
B
2.0±0.1
（0.079±0.004）
4.0±0.1
（0.157±0.004）
7.5±0.1
（0.295±0.004）
A
Electrode
（bottom view）
③Taping dimensions
◦Embossed tape 8mm wide (0.315 inches wide)
＋0.004
1.75±0.1
K
（0.069±0.004）
T
3.5±0.1
（0.138±0.004）
）
B
A
NR 8040
A
B
Insertion pitch
F
12.0±0.1
8.3±0.1
8.3±0.1
(0.327±0.004) (0.327±0.004) (0.472±0.004)
Tape thickness
T
K
0.5±0.1
(0.020±0.004)
4.5±0.1
(0.177±0.004)
Unit : mm (inch)
8.0±0.2
（0.315±0.008）
CHIP cavity
＋0.1
φ1.5ー0
（0.059ー0
Chip cavity
Type
④Leader and Blank portion
◦NR, NRH, NRS, NRG, NRV
Electrode
（bottom view）
F
Chip cavity
Blank portions
Blank portions
Leader
2.0±0.05
4.0±0.1
（0.079±0.002） （0.157±0.004）
Chip cavity
Type
NRH 2410
A
Insertion pitch
F
B
2.6±0.1
2.6±0.1
（0.102±0.004）（0.102±0.004）
Tape thickness
T
K
0.25±0.05
1.3±0.1
（0.009±0.002）（0.051±0.004）
160mm or more
(6.3 inches or more)
1.4±0.1
（0.055±0.004）
4.0±0.1
NR 3012
3.2±0.1
3.2±0.1 （0.157±0.004） 0.3±0.05
1.6±0.1
NRH 3012
（0.126±0.004）（0.126±0.004）
（0.012±0.002）（0.063±0.004）
NRV3012
100mm or more
(3.94 inches or more)
NR 3010
NRH 3010
400mm or more
(15.8 inches or more)
Direction of tape feed
1.9±0.1
（0.075±0.004）
NR 3015
Unit : mm (inch)
◦Embossed tape 12mm wide (0.47 inches wide)
1.75±0.1
K
（0.069±0.004）
T
B
A
F
12.0±0.3
（0.472±0.012）
CHIP cavity
5.5±0.1
（0.217±0.004）
＋0.1
φ1.5ー0
＋0.004
（0.059ー0
）
Electrode
（bottom view）
2.0±0.1
4.0±0.1
（0.079±0.004） （0.157±0.004）
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound0405_pack-P1
1
wound0405_pack_e-01
■ PACKAGING
⑤Reel size
W
φD
φd
2±0.5
φ13±0.5
2.5 or less
（0.098inches
or less）
φD
Reel size (Reference values)
φd
W
180±0.5
（7.087±0.019）
60±1.0
（2.36±0.04）
10.0±1.5
（0.394±0.059）
180±3.0
（7.087±0.118）
60±2.0
（2.36±0.08）
14.0±1.5
（0.551±0.059）
Type
NRH2410
NR 3010
NRH 3010
NR 3012
NRH 3012
NRV 3012
NR 3015
NRS 5012
NRS 5014
NRS 5020
NRS 6010
NR 6012
Unit : mm (inch)
W
φD
φd
2±0.5
φ13±0.5
t
Type
φD
Reel size (Reference values)
φd
t (max.)
W
NR 4010
NR 4012
NR 4018
NRG 4026
NR 5040
330±3.0
80±2.0
（12.99±0.118） （3.15±0.078）
NR 6020
NR 6028
NR 6045
18.5
（0.72）
13.5±1.0
（0.531±0.04）
NR 8040
22.5
（0.89）
17.5±1.0
（0.689±0.04）
Unit : mm (inch)
⑥Top Tape Strength
The top tape requires a peel-off force of 0.1 to 1.3N in the direction of the arrow as
illustrated below.
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound0405_pack_e-01
1
wound0405_pack-P2
SMD INDUCTORS LARGE CURRENT TYPE
■ FEATURES
■ APPLICATIONS
◦SMD inductor.
◦Power supply circuits / DC-DC converters in a variety of applications such
as PDP TV, LCD TV, HDD, PC, etc.
◦It corresponds to High current.
◦Simple and original magnetic shield structure.
■ ORDERING CODE
R △ 1
N
0
0
❶
5
T △ 1
0
❷
❶Type
NR△ Coating resin specification
❸
❷External dimensions
(W×H)
T△
example
△＝Blank Space
❸Packaging
Tape & Reel
△＝Blank Space
10050
0
❹
example
1R3
100
101
❺
❻
❺Inductance tolerance
M
±20%
N
±30%
❹Nominal inductance
〔μH〕
10.0×5.0mm
M △
0
△
❻Internal code
Standard product
△＝Blank Space
1.3
10
100
※R＝decimal point
Recommended Land Patterns
Surface Mounting
・Mounting and soldering conditions should be checked
beforehand.
・Applicable soldering process to these products is reflow
soldering only.
a
L
W
■ AVAILABLE INDUCTANCE RANGE
b
b
4.5
H
2.6
Type
L
W
10.0±0.3
9.8±0.5
NR 10050
（0.394±0.012）（0.386±0.020）
5.4
2.6
Unit : mm
Standard
Quantity [pcs]
Tape & Reel
H
a
b
5.0 max
(0.197 max)
4.0
（0.16）
1.75
（0.07）
Range
Type
NR 10050
Rdc±30％ [mΩ]
Imax [A]
1.0
Inductance［μH］
■ EXTERNAL DIMENSIONS/STANDARD QUANTITY
9
4.1
25
1.2
209
0.8
450
10
100
220
6.8
500
Unit : mm (inch)
■ PART NUMBERS
●NR 10050 type
Ordering code
EHS (Environmental
Hazardous
Substances)
Inductance
[μH]
NR10050T1R3N
NR10050T2R1N
NR10050T2R9N
NR10050T3R8N
NR10050T4R9N
NR10050T6R5N
NR10050T100M
NR10050T150M
NR10050T220M
NR10050T330M
NR10050T470M
NR10050T680M
NR10050T101M
NR10050T221M
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.3
2.1
2.9
3.8
4.9
6.5
10
15
22
33
47
68
100
220
Inductance
Tolerance
±30％
±20％
Self-resonant
frequency
[MHz] (min.)
DC Resistance
[Ω] (±30%)
53
37
29
26
23
19
15
11
10
8.2
7.0
5.6
4.6
3.0
0.0068
0.008
0.0093
0.013
0.015
0.018
0.025
0.035
0.045
0.066
0.092
0.144
0.209
0.450
Rated current ※）[mA]
Saturation current Temperature rise current
Idc1
Idc2
11000
9000
10000
8300
8200
7300
7300
6800
6600
6000
6000
5200
4700
4100
3600
3200
2600
2500
2500
2100
2000
1800
1700
1500
1300
1200
1000
800
Measuring
frequency
[kHz]
100
※）The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20℃)
※）The temperature rise current value (Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃)
※）The maximum rated current is the DC current value that satisfies both of current value Saturation current value and temperature rise current value. (at 20℃)
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
132
1
wound06_e-01
■ ELECTRICAL CHARACTERISTICS
■ DC Bias characteristics
（Measured by HP4285A）
NR 10050
1000.0
221M
100.0
101M
Inductance
〔μH〕
680M
470M
330M
220M
150M
10.0
100M
6R5N
4R9N
3R8N
2R9N
2R1N
1.0
1.0
10.0
FERRITE PRODUCTS
0.1
0.1
1R3N
100.0
DC Bias
〔A〕
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound06_e-01
1
133
■ PACKAGING
⑥Top Tape Strength
①Minimum Quantity
Standard Quantity [pcs]
Tape & Reel
500
Type
NR 10050
The top tape requires a peel-off force of 0.1 to 0.7N in the direction of the arrow as
illustrated below.
②Tape Material
③Taping dimensions
◦Embossed tape 24mm wide (0.945 inches wide)
2.0±0.1
（0.079±0.004）
16.0±0.1
（0.63±0.004）
4.0±0.1
（0.157±0.004）
＋0.1
φ1.5ー0
＋0.004
（0.059ー0
）
1.75±0.1
（0.069±0.004）
F
K
T
B
＋0.3
24.0 11.5±0.1
ー0.1
＋0.012
（0.453±0.004）
（0.945 ー0.004
）
A
A
Chip cavity
B
Insertion pitch
F
10.4±0.1
(0.409±0.004)
9.9±0.1
(0.390±0.004)
16.0±0.1
(0.630±0.004)
Type
NR 10050
Tape thickness
T
K
0.5±0.05
(0.020±0.002)
5.7±0.1
(0.224±0.004)
Unit : mm (inch)
④Leader and Blank portion
Cover Tape Blank portions
Chip cavity
Blank portions
100 to 200mm 20 to 30 pockets
40 to 50 pockets
（3.94 to 7.87
inches）
Direction of tape feed
Leader
1role of reel
⑤Reel size
25.5±1.0
（1.004±0.04）
φD
φd
2±0.5
（0.079±0.020）
φ13±0.5
（φ0.512±0.020）
t
φD
Reel size (Reference values)
φd
t (max.)
330±3
(12.99±0.118)
80±2
(3.15±0.078)
30.5
(1.201)
Type
NR 10050
Unit : mm (inch)
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound06_pack_e-01
1
wound06_pack-P1
SMD INDUCTORS COMPACT TYPE
REFLOW
■ FEATURES
■ APPLICATIONS
◦BR C2518/BRFL2518 (NEW PRODUCTS)
The best efficiency design is achieved by adopting bottom-surface electrode structure.Small and low-profile Wound Chip Inductors that are suitable
for module design which needs high electric current like DC/DC converters.
◦For small DC/DC converter
(cellular phone, HDD, DVC, DSC, PDA, LCD display etc).
■ ORDERING CODE
R △ 2
B
❶
BR
5
❷
❶Type
SMD Inductors
1
8
T
❸
❷Characteristic Spec
△ Low Rdc
L
Low profile
C
High Current
FL Low profile
2
R
❹
M △ △ △
2
❺
❸External Dimensions
(W×L) : mm (inch)
1608 (0603)
1.6×0.8mm
2012 (0805)
2.0×1.2mm
2016 (0806)
2.0×1.6mm
2518 (1007)
2.5×1.8mm
3225 (1210)
3.2×2.5mm
T
❻
❹Packaging
Tape & Reel
❼
❺Nominal Inductance
〔μH〕
example
R20
1R0
2R2
4R7
❻Inductance tolerance
M
±20%
K
±10%
0.2
1.0
2.2
4.7
❼Internal code
△△△ Standard product
△＝Blank Space
※R＝decimal point
■ EXTERNAL DIMENSIONS/STANDARD QUANTITY
L
W
Type
H
e
Recommended Land Patterns
Surface Mounting
・Mounting and soldering conditions should be
checked beforehand.
・Applicable soldering process to this products is
reflow soldering only.
L
W
H
Standard Quantity [pcs]
Embossed Tape
Paper Tape
e
BR C1608
1.6±0.2
0.8±0.2
0.8±0.2
0.45±0.15
（0.063±0.008）（0.031±0.008）（0.031±0.008）（0.016±0.006）
ー
3000
BR L2012
1.0 max.
0.5±0.2
2.0±0.2
1.25±0.2
（0.078±0.008）（0.049±0.008） （0.040 max.） （0.020±0.008）
ー
3000
BR C2016
2.0±0.2
1.6±0.2
1.6±0.2
0.5±0.2
（0.078±0.008）（0.063±0.008）（0.063±0.008）（0.020±0.008）
ー
2000
BR C2518
2.5±0.2
1.8±0.2
1.8±0.2
0.5±0.2
（0.098±0.008）（0.071±0.008）（0.071±0.008）（0.020±0.008）
ー
2000
BR L2518
1.2 max.
0.5±0.2
2.5±0.2
1.8±0.2
（0.098±0.008）（0.071±0.008） （0.048 max.） （0.020±0.008）
ー
3000
BRFL2518
2.5±0.2
1.8±0.2
1.0 max.
0.5±0.2
（0.098±0.008）（0.071±0.008） （0.040 max.） （0.020±0.008）
ー
3000
BR L3225
3.2±0.2
2.5±0.2
1.7 max.
0.75±0.2
（0.126±0.008）（0.098±0.008） （0.068 max.） （0.030±0.008）
ー
2000
Unit : mm (inch)
C
A
B
Type
1608
2012
2016
2518
3225
A
A
0.55
0.65
0.70
0.65
1.00
B
0.80
0.90
0.80
1.50
1.60
C
0.90
1.40
1.80
1.95
2.70
Unit : mm
■ AVAILABLE INDUCTANCE RANGE
Range
Type
BR L3225
Imax
[mA]
BR L2518
BRFL2518
Rdc±30％ Imax
[Ω] [mA]
Rdc±30％ Imax
[Ω] [mA]
BR C2518
Rdc±30％ Imax
[Ω] [mA]
BR C2016
Rdc±30％ Imax
[Ω] [mA]
BR L2012
Rdc±30％ Imax
[Ω] [mA]
Inductance［μH］
1,050
1.0
2,200
1μH
0.043
2.2
4.7
10
1,200
850
650
700
0.350
1μH
4.7μH
0.080
0.135
0.330
1,000
850
470
1μH
4.7μH
0.080
0.135
1,650
1μH
0.050
1,100
1μH
0.085
BR C1608
Rdc±30％ Imax
[Ω] [mA]
0.47μH
850
0.090
0.135
980
0.2μH
Rdc±30％
[Ω]
0.060
520
0.180
280
0.550
2.2μH
0.400
610
0.350
520
3.60
170
0.400
270
3.40
85
0.850
22
47
100
220
250
2.50
100μH
190
100μH
100μH
100μH
7.70
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
134
1
wound07_e-01
■ PART NUMBERS
●BR C1608 type
EHS (Environmental
Hazardous
Substances)
Inductance
[μH]
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
0.20
0.35
0.45
0.56
0.77
1.00
1.50
2.20
±20％
Ordering code
EHS (Environmental
Hazardous
Substances)
Inductance
[μH]
Inductance
Tolerance
BR L2012TR47M
BR L2012T1R0M
BR L2012T1R5M
BR L2012T2R2M
BR L2012T3R3M
BR L2012T4R7M
BR L2012T6R8M
BR L2012T100M
BR L2012T150M
BR L2012T220M
BR L2012T330M
BR L2012T470M
BR L2012T680M
BR L2012T101M
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
0.47
1.0
1.5
2.2
3.3
4.7
6.8
10
15
22
33
47
68
100
±20％
EHS (Environmental
Hazardous
Substances)
Inductance
[μH]
Inductance
Tolerance
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
1.5
2.2
3.3
4.7
6.8
10
15
22
33
47
68
100
Ordering code
BR
BR
BR
BR
BR
BR
BR
BR
C1608TR20M
C1608TR35M
C1608TR45M
C1608TR56M
C1608TR77M
C1608T1R0M
C1608T1R5M
C1608T2R2M
Inductance
Tolerance
Self-resonant
DC Resistance
frequency
[Ω] (±30%)
[MHz] (min.)
400
300
200
170
150
140
120
100
0.060
0.080
0.090
0.095
0.110
0.180
0.300
0.550
Rated current ※）[mA]
Measuring
Saturation current Temperature rise current frequency
[MHz]
Idc1
Idc2
1,750
980
1,400
810
1,250
800
1,150
760
7.96
1,000
660
850
520
700
410
550
280
●BR L2012 type
350
300
250
200
190
150
60
30
15
13
8.0
7.0
6.5
6.0
0.090
0.135
0.180
0.300
0.500
0.550
0.750
0.850
1.00
1.30
2.00
3.50
5.80
7.70
Rated current ※）[mA]
Measuring
Saturation current Temperature rise current frequency
[MHz]
Idc1
Idc2
1,100
1,050
850
850
700
750
7.96
600
550
490
440
340
400
350
290
330
270
300
220
270
190
2.52
220
150
160
125
110
100
85
85
0.796
FERRITE PRODUCTS
Self-resonant
DC Resistance
frequency
[Ω] (±30%)
[MHz] (min.)
●BR C2016 type
Ordering code
BR
BR
BR
BR
BR
BR
BR
BR
BR
BR
BR
BR
BR
C2016T1R0M
C2016T1R5M
C2016T2R2M
C2016T3R3M
C2016T4R7M
C2016T6R8M
C2016T100□
C2016T150□
C2016T220□
C2016T330□
C2016T470□
C2016T680□
C2016T101□
±20％
±20％
±10％
Self-resonant
DC Resistance
frequency
[Ω] (±30%)
[MHz] (min.)
450
370
250
140
78
39
35
28
24
13
11
8
7
0.085
0.150
0.180
0.220
0.270
0.330
0.400
0.600
1.00
1.70
2.20
2.80
3.40
Rated current ※）[mA]
Measuring
Saturation current Temperature rise current frequency
[MHz]
Idc1
Idc2
1,350
1,100
1,100
820
910
760
740
680
610
660
560
550
450
520
0.10
410
400
310
310
240
270
210
210
200
190
140
170
●BR C2518 type
Ordering code
BR
BR
BR
BR
BR
BR
BR
BR
BR
BR
BR
BR
BR
C2518T1R0M
C2518T1R5M
C2518T2R2M
C2518T3R3M
C2518T4R7M
C2518T6R8M
C2518T100□
C2518T150□
C2518T220□
C2518T330□
C2518T470□
C2518T680□
C2518T101□
EHS (Environmental
Hazardous
Substances)
Inductance
[μH]
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
1.5
2.2
3.3
4.7
6.8
10
15
22
33
47
68
100
Inductance
Tolerance
±20％
±20％
±10％
Self-resonant
DC
Resistance
frequency
[MHz] (min.) [Ω] (±30%)
280
230
200
150
100
45
20
13
10
8
6.5
5.5
4.5
0.050
0.080
0.120
0.175
0.230
0.280
0.350
0.43
0.56
0.85
1.45
2.40
3.60
Rated current ※）[mA]
Saturation
Temperature rise
current
current
Idc1
Idc2
2,550
1,650
2,100
1,300
1,800
1,000
1,450
860
1,250
750
1,050
680
890
610
550
760
490
640
390
560
300
410
230
340
300
190
Measuring
frequency
[MHz]
1.00
・Please specify the inductance tolerance code. (M or K)
※）The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20℃)
※）The temperature rise current value (Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃)
※）The rated current is the DC current value that satisfies both of DC saturation current value and temperature rise current value.
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound07_e-01
1
135
■ PART NUMBERS
●BR L2518 type
EHS (Environmental
Hazardous
Substances)
Inductance
[μH]
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
1.5
2.2
3.3
4.7
±20％
Ordering code
EHS (Environmental
Hazardous
Substances)
Inductance
[μH]
Inductance
Tolerance
BRFL2518T1R0M
BRFL2518T1R5M
BRFL2518T2R2M
BRFL2518T3R3M
BRFL2518T4R7M
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
1.5
2.2
3.3
4.7
±20％
EHS (Environmental
Hazardous
Substances)
Inductance
[μH]
Inductance
Tolerance
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
1.5
2.2
3.3
4.7
6.8
10
15
22
33
47
68
100
Ordering code
BR
BR
BR
BR
BR
L2518T1R0M
L2518T1R5M
L2518T2R2M
L2518T3R3M
L2518T4R7M
Inductance
Tolerance
Self-resonant
DC
Resistance
frequency
[MHz] (min.) [Ω] (±30%)
130
100
80
70
60
0.080
0.100
0.135
0.300
0.400
Rated current ※）[mA]
Saturation
Temperature rise
current
current
Idc1
Idc2
1,300
1,000
1,200
920
900
850
750
580
650
470
Measuring
frequency
[MHz]
7.96
●BRFL2518 type
Self-resonant
DC
Resistance
frequency
[MHz] (min.) [Ω] (±30%)
130
100
80
70
60
0.090
0.110
0.130
0.220
0.330
Rated current ※）[mA]
Saturation
Temperature rise
current
current
Idc1
Idc2
1,200
1,200
1100
1000
850
950
700
700
650
650
Measuring
frequency
[MHz]
1.00
●BR L3225 type
Ordering code
BR
BR
BR
BR
BR
BR
BR
BR
BR
BR
BR
BR
BR
L3225T1R0M
L3225T1R5M
L3225T2R2M
L3225T3R3M
L3225T4R7M
L3225T6R8M
L3225T100□
L3225T150□
L3225T220□
L3225T330□
L3225T470□
L3225T680□
L3225T101□
±20％
±20％
±10％
Self-resonant
DC
Resistance
frequency
[MHz] (min.) [Ω] (±30%)
220
170
150
140
120
90
70
20
13
9
7
6
5
0.043
0.045
0.065
0.120
0.180
0.270
0.350
0.570
0.690
0.840
1.00
1.40
2.50
Rated current ※）[mA]
Saturation
Temperature rise
current
current
Idc1
Idc2
2,400
2,200
2,200
1,750
1,850
1,600
1,450
1,200
1,300
1,000
770
1,050
900
700
530
700
470
550
420
470
420
390
330
300
270
250
Measuring
frequency
[MHz]
0.10
・Please specify the inductance tolerance code. (M or K)
※）The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20℃)
※）The temperature rise current value (Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃)
※）The rated current is the DC current value that satisfies both of DC saturation current value and temperature rise current value.
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
136
1
wound07_e-01
■ ELECTRICAL CHARACTERISTICS
■ DC Bias characteristics
（Measured by HP4285A）
BRL3225
1R0M
2R2M
1
1R0M
Inductance
（μH）
1R0M
1
2R2M
1
101□
4R7M
Inductance
（μH）
100□
4R7M
Inductance
（μH）
Inductance
（μH）
101□
10
100
10
10
10
BRC2518
BRL2518
BRFL2518
10
100□
1
1R0M
0.1
1
10
100
1000
DC BIAS
（mA）
0.1
10000
1
10
100
1000
DC BIAS
（mA）
0.1
10000
1
10
BRL2012
BRC2016
100
100
1000
DC BIAS
（mA）
0.1
10000
1
10
100
1000
DC BIAS
（mA）
10000
BRC1608
10
1000
1R0M
101M
10
100M
2R2M
1
R77M
1
1R0M
0.1
1
10
100
1000
DC BIAS
（mA）
0.1
10000
R20M
0.1
1
10
100
1000
DC BIAS
（mA）
1
10000
10
■ Impedance-vs-Frequency characteristics
BRFL2518
10000
10
1
1R0M
100
10
100
1000 10000
10
100 1000
Frequency
（MHz）
BRC2016
100□
10000
10
10
100
Frequency
（MHz）
1R0M
100
10
1
1R0M
100
1000
1
1
10
100
1000
10000
Frequency
（MHz）
BRC1608
10000
100M
1000
10
1
101M
10000
Impedance
（Ω）
Impedance
（Ω）
100000
101□
1000
0.1
0.1
1R0M
100
BRL2012
100000
10000
1000
1
1
Frequency
（MHz）
1R0M
1000
1000
Impedance
（Ω）
10
100□
10000
1000
1
1
101□
2R2M
Impedance
（Ω）
1R0M
Impedance
（Ω）
Impedance
（Ω）
1000
100000
4R7M
2R2M
100□
100
BRC2518
BRL2518
10000
4R7M
101□
10000
10000
（Measured by HP4291A）
BRL3225
100000
100
1000
DC BIAS
（mA）
Impedance
（Ω）
1
100
Inductance
（μH）
100□
Inductance
（μH）
10
FERRITE PRODUCTS
Inductance
（μH）
101□
2R2M
1000
R77M
R20M
100
10
10
1
10
100
Frequency
（MHz）
1000
1
1
1
10
100
Frequency
（MHz）
1000
1
10
100
1000
Frequency
（MHz）
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound07_e-01
1
137
■ PACKAGING
①Minimum Quantity
⑤Reel size
Standard Quantity [pcs]
Paper Tape
Embossed Tape
ー
3,000
ー
3,000
ー
2,000
ー
2,000
ー
3,000
ー
3,000
ー
2,000
2.5 or less
（0.098max）
＋0.039
φ60 ＋1
)
−0（φ2.36 −0
BR C1608
BR L2012
BR C2016
BR C2518
BR L2518
BRFL2518
BR L3225
φ180 ＋0
（φ7.09 ＋0
−3
−0.118 )
Type
②Tape Material
10.0±1.5
(0.394±0.059)
⑥Top Tape Strength
The top tape requires a peel-off force of 0.2 to 0.7N in the direction of the arrow as
illustrated below.
③Taping dimensions
◦Embossed Tape
8mm wide (0.315 inches wide)
◦Card board carrier tape 8mm wide (0.315 inches wide)
Chip cavity
Type
A
B
Insertion pitch
F
Tape thickness
T
K
BR C1608
1.0±0.10
1.9±1.0
4.0±0.1
0.25±0.05
（0.04±0.004）（0.076±0.004）（0.157±0.004）（0.01±0.002）
1.2 max.
（0.047）
BR L2012
1.40±0.1
2.2±0.1
4.0±0.1
0.25±0.05
（0.056±0.004）（0.088±0.004）（0.157±0.004）（0.01±0.002）
1.2 max.
（0.048）
BR C2016
1.75±0.1
2.1±0.1
4.0±0.1
0.3±0.05
（0.069±0.004）（0.083±0.004）（0.157±0.004）（0.012±0.002）
1.9 max.
（0.074）
BR C2518
2.15±0.1
2.7±0.1
4.0±0.1
0.3±0.05
2.2 max.
（0.085±0.004）（0.107±0.004）（0.157±0.004）（0.012±0.002） （0.086）
BR L2518
2.3±0.1
2.8±0.1
4.0±0.1
0.3±0.05
1.45 max.
（0.092±0.004）（0.112±0.004）（0.157±0.004）（0.012±0.002） （0.057）
BRFL2518
2.15±0.1
2.8±0.1
4.0±0.1
0.25±0.05
（0.085±0.004）（0.112±0.004）（0.157±0.004）（0.01±0.002）
1.25 max.
（0.049）
BR L3225
2.8±0.1
3.5±0.1
4.0±0.1
0.25±0.05
（0.112±0.004）（0.140±0.004）（0.157±0.004）（0.01±0.002）
1.9 max.
（0.074）
Unit : mm (inch)
④Leader and Blank portion
Blank portions
Chip cavity
160 to 320mm
（6.3 to 12.8 inches）
Direction of tape feed
Blank portions
Leader
160 to 200 mm
（6.3 to 7.87 inches）
400 to 560 mm
（16.0 to 22.4 inches）
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound07_pack_e-01
1
wound07_pack-P1
■ RELIABILITY DATA
1. Operating Temperature Range
BRC1608, BRL2012, BRC2016, BRC2518,
ー25∼＋105℃
BRFL2518, BRL2518, BRL3225 Type
NR30/40/50/60/80, NRV30, NRG40,
ー25∼＋120℃
NRH24/30, NRS50/60 Type
NR10050 Type
ー25∼＋105℃
【Test Method and Remarks】
Including self-generated heat
2. Storage Temperature Range
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
NR30/40/50/60/80, NRV30, NRG40,
ー40∼＋85℃
NRH24/30, NRS50/60 Type
NR10050 Type
【Test Method and Remarks】
BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type, NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type : 0 to 40℃ for the product with taping.
NR10050 Type : 0∼40℃ for the product with taping.
3. Rated current
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
NR30/40/50/60/80, NRV30, NRG40,
Within the specified tolerance
NRH24/30, NRS50/60 Type
NR10050 Type
4. Inductance
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
NR30/40/50/60/80, NRV30, NRG40,
Within the specified tolerance
NRH24/30, NRS50/60 Type
NR10050 Type
【Test Method and Remarks】
BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type : LCR Meter : HP 4285A or equivalent, Measuring frequency : Specified frequency
NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type : LCR Meter : HP 4285A or equivalent, 100KHz, 1V
NR10050 Type
: LCR Meter : HP 4263A or equivalent, 100KHz, 1V
5. DC Resistance
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
NR30/40/50/60/80, NRV30, NRG40,
Within the specified tolerance
NRH24/30, NRS50/60 Type
NR10050 Type
【Test Method and Remarks】
DC ohmmeter : HIOKI 3227 or equivalent
6. Self resonance frequency
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
NR30/40/50/60/80, NRV30, NRG40,
Within the specification
NRH24/30, NRS50/60 Type
NR10050 Type
【Test Method and Remarks】
BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type, NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type, NR10050 Type :
Inpedance analyzer/material analyzer : HP4291A or equivalent HP4191A, 4192A or equivalent
7. Temperature characteristic
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
BRL2012, BRC2016, BRL2518, BRL3225, BRC2518, BRFL2518
Inductance change : Within ±15%
BRC1608
Inductance change : Within ±20%
NR30/40/50/60/80, NRV30, NRG40,
NRH24/30, NRS50/60 Type
Inductance change : Within ±20%
NR10050 Type
【Test Method and Remarks】
BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type, NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type, NR10050 Type :
Measurement of inductance shall be taken at temperature range within −25℃∼＋85℃.
With reference to inductance value at ＋20℃., change rate shall be calculated.
Change of maximum inductance deviation in step 1 to 5
Temperature at step 1
Temperature at step 2
Temperature at step 3
Temperature at step 4
Temperature at step 5
20℃
Minimum operating temperature
20℃ (Standard temperature)
Maximum oparating temperature
20℃
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound0407_reli-RP1
1
wound0407_reli_e-01
■ RELIABILITY DATA
8. Resistance to flexure of substrate
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
No damage.
NR30/40/50/60/80, NRV30, NRG40,
NRH24/30, NRS50/60 Type
NR10050 Type
【Test Method and Remarks】
BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type, NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type :
The test samples shall be soldered to the test board by the reflow. As illustrated below, apply force in the direction of the arrow indicating until deflection of the test board
reaches to 2 mm.
Force Rod
20
10
Test board size
: 100×40×1.0
R230
Test board material
: glass epoxy-resin
Solder cream thickness : 0.12 (BR Series)
Board
0.10 (NR30/40, NRV30, NRH24/30,NRG40)
Test Sample
R5
0.15 (NR50/60/80, NRS50/60)
45±2mm
Land dimension
（BRC1608）
Land dimension
（BRL2012）
0.9
Land dimension
（BRL3225）
1.4
0.55 0.8 0.55
0.65 0.9 0.65
Land dimension
（ＢＲＣ2016）
Land dimension
（NR30, NRH30, NRV30）
2.7
1.0
1.6
Land dimension
（BRL2518,BRC2518,BRFL2518） Land dimension
（NRH24）
1.95
1.8
0.7 0.8 0.7
0.65 1.5 0.65
4.0
1.5 2.1 1.5
1.6 3.1 1.6
Land dimension
（NR40, NRG40）
Land dimension
（NR80）
3.7
2.0
0.7 0.75 0.7
Land dimension
（NR, NRS50）
5.7
2.7
0.8 1.4 0.8
1.0
45±2mm
Land dimension
（NR60, NRS60）
1.2 1.6 1.2
7.5
1.8 3.8 1.8
Printed board thickness : 1.0mm
Unit : mm
9. Insulation resistance : between wires
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
NR30/40/50/60/80, NRV30, NRG40,
NRH24/30, NRS50/60 Type
NR10050 Type
10. Insulation resistance : between wire and core
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
NR30/40/50/60/80, NRV30, NRG40,
NRH24/30, NRS50/60 Type
NR10050 Type
11. Withstanding voltage : between wires and core
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
NR30/40/50/60/80, NRV30, NRG40,
NRH24/30, NRS50/60 Type
NR10050 Type
12. Adhesion of terminal electrode
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
NR30/40/50/60/80, NRV30, NRG40,
Shall not come off PC board.
NRH24/30, NRS50/60 Type
NR10050 Type
【Test Method and Remarks】
BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type, NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type :
The test samples shall be soldered to the test board by the reflow.
・Applied force
: 10N to X and Y directions.
・Duration
: 5s.
10N, 5s
・Solder cream thickness : 0.15mm.
BRC1608, NR10050 Type :
・Applied force : 5N to X and Y directions.
・Duration
: 5s.
13. Resistance to vibration
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
Inductance change : Within ±10%
NR30/40/50/60/80, NRV30, NRG40,
No significant abnormality in appearance.
NRH24/30, NRS50/60 Type
NR10050 Type
【Test Method and Remarks】
BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type, NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type, NR10050 Type :
The test samples shall be soldered to the test board by the reflow.
Then it shall be submitted to below test conditions.
Frequency Range
Total Amplitude
Sweeping Method
Time
10∼55Hz
1.5mm (May not exceed acceleration 196m/s2)
10Hz to 55Hz to 10Hz for 1min.
X
Y
For 2 hours on each X, Y, and Z axis.
Z
Recovery : At least 2hrs of recovery under the standard condition sfter the test, followed by the measurement within 48hrs.
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound0407_reli_e-01
1
wound0407_reli-RP2
■ RELIABILITY DATA
14. Solderability
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
NR30/40/50/60/80, NRV30, NRG40,
At least 90％ of surface of terminal electrode is covered by new solder.
NRH24/30, NRS50/60 Type
NR10050 Type
【Test Method and Remarks】
BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type, NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type, NR10050Type :
The test samples shall be dipped in flux, and then immersed in molten solder as shown in below table.
Flux : Methanol solution containing rosin 25%.
NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type :
Solder Temperature
Time
245±5℃
5±1.0 sec.
BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type :
Solder Temperature
Time
245±5℃
5±0.5 sec.
※Immersion depth : All sides of mounting terminal shall be immersed.
15. Resistance to soldering heat
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
Inductance change : Within ±10%
NR30/40/50/60/80, NRV30, NRG40,
No significant abnormality in appearance.
NRH24/30, NRS50/60 Type
NR10050 Type
【Test Method and Remarks】
BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type :
3 times of reflow oven at 230℃ MIN. for 40sec. with peak temperature at 260＋0
ー5 ℃ for 5sec.
:
NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type, NR10050 Type
The test sample shall be exposed to reflow oven at 230±5℃ for 40 seconds, with peak temperature at 260±5℃ for 5 seconds, 2 times.
NR6020 Type :
The test sample shall be exposed to reflow oven at 230±5℃ for 40 seconds, with peak temperature at 250＋0
ー5 ℃ for 5 seconds, 2 times.
Test board thickness : 1.0mm
Test board material : glass epoxy-resin
16. Thermal shock
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
Inductance change : Within ±10%
NR30/40/50/60/80, NRV30, NRG40,
No significant abnormality in appearance.
NRH24/30, NRS50/60 Type
NR10050 Type
【Test Method and Remarks】
BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type, NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type, NR10050 Type :
The test samples shall be soldered to the test board by the reflow. The test samples shall be placed at specified temperature for specified time by step 1 to step 4 as shown
in below table in sequence. The temperature cycle shall be repeated 100 cycles.
Step
Conditions of 1 cycle
Temperature (℃)
Duration (min)
1
2
ー40±3
Room temperature
30±3
Within 3
3
4
＋85±2
Room temperature
30±3
Within 3
17. Damp heat
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
Inductance change : Within ±10%
No significant abnormality in appearance.
NR30/40/50/60/80, NRV30, NRG40,
NRH24/30, NRS50/60 Type
NR10050 Type
【Test Method and Remarks】
BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type :
Temperature
Humidity
Time
60±2℃
90∼95%RH
1000 hours.
Recovery : At least 2hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs.
NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type :
The test samples shall be soldered to the test board by the reflow.
The test samples shall be placed in thermostatic oven set at specified temperature and humidity as shown in below table.
Temperature
Humidity
Time
60±2℃
90∼95%RH
500±24hour
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound0407_reli-RP3
1
wound0407_reli_e-01
■ RELIABILITY DATA
18. Loading under damp heat
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
Inductance change : Within ±10%
NR30/40/50/60/80, NRV30, NRG40,
No significant abnormality in appearance.
NRH24/30, NRS50/60 Type
NR10050 Type
【Test Method and Remarks】
BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type :
Temperature
Humidity
Applied current
Time
60±2℃
90∼95％RH
Rated current
1000hours.
Recovery : At least 2hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs.
NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type, NR10050 Type :
The test samples shall be soldered to the test board by the reflow.
The test samples shall be placed in thermostatic oven set at specified temperature and humidity and applied the rated current continuously as shown in below table.
Temperature
Humidity
Applied current
Time
60±2℃
90∼95％RH
Rated current
500±2hour
19. Low temperature life test
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
Inductance change : Within ±10%
NR30/40/50/60/80, NRV30, NRG40,
No significant abnormality in appearance.
NRH24/30, NRS50/60 Type
NR10050 Type
【Test Method and Remarks】
BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type :
Temperature
Duration
ー40±2℃
1000hours
Recovery : At least 2hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs.
NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type, NR10050 Type :
The test samples shall be soldered to the test board by the reflow.
After that, the test samples shall be placed at test conditions as shown in below table.
Temperature
Time
−40±3℃
500±24hour
20. High temperature life test
BRC1608, BRL2012, BRC2016, BRC2518, Inductance change : Within ±10%
BRFL2518, BRL2518, BRL3225 Type
No significant abnormality in appearance.
NR30/40/50/60/80, NRV30, NRG40,
NRH24/30, NRS50/60 Type
Inductance change : Within ±10%
NR10050 Type
No significant abnormality in appearance.
【Test Method and Remarks】
BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type :
Temperature
Duration
85±2℃
1000hours
Recovery : At least 2hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs.
NR10050 Type :
Temperature
Time
105±3℃
500±24hour
Recovery : At least 2hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs.
21. Loading at high temperature life test
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
NR30/40/50/60/80, NRV30, NRG40,
Inductance change : Within ±10%
NRH24/30, NRS50/60 Type
No significant abnormality in appearance.
NR10050 Type
【Test Method and Remarks】
NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type :
The test samples shall be soldered to the test board by the reflow soldering.
Temperature
Applied current
Time
85±2℃
Rated current
500±24hour
22. Standard condition
BRC1608, BRL2012, BRC2016, BRC2518, Standard test condition :
BRFL2518, BRL2518, BRL3225 Type
Unless otherwise specified, temperature is 20±15％ and 65±20％of relative humidity.
When there are question concerning measurement result : In order to provide correlation date, the test shall be condition of 20±2℃
NR30/40/50/60/80, NRV30, NRG40,
of temperature, 65±5% relative humidity.
NRH24/30, NRS50/60 Type
Inductance is in accordance with our measured value.
NR10050 Type
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound0407_reli_e-01
1
wound0407_reli-RP4
■ PRECAUTIONS
SMD Inductors
1. Circuit Design
◆Operating environment
1. The products described in this specification are intended for use in general electronic equipment,(office supply equipment, telecommunications systems,
measuring equipment, and household equipment). They are not intended for use in mission-critical equipment or systems requiring special quality and high
Precautions
reliability (traffic systems, safety equipment, aerospace systems, nuclear control systems and medical equipment including life-support systems,) where
product failure might result in loss of life, injury or damage. For such uses, contact TAIYO YUDEN Sales Department in advance.
2. PCB Design
◆Land pattern design
1. Please refer to a recommended land pattern.
◆Land pattern design
Technical
Surface Mounting
consider・Mounting and soldering conditions should be checked beforehand.
ations
・Applicable soldering process to this products is reflow soldering only.
Precautions
3. Considerations for automatic placement
◆Adjustment of mounting machine
1. Excessive impact load should not be imposed on the products when mounting onto the PC boards.
Precautions
2. Mounting and soldering conditions should be checked beforehand.
Technical
◆Adjustment of mounting machine
consider1. When installing products, care should be taken not to apply distortion stress as it may deform the products.
ations
4. Soldering
◆Reflow soldering
1. Please contact any of our offices for a reflow soldering, and refer to the recommended condition specified.
2. This products is reflow soldering only.
3. Please do not add any stress to a product until it returns in normal temperature after reflow soldering.
◆Lead free soldering
1. When using products with lead free soldering, we request to use them after confirming of adhesion, temperature of resistance to soldering heat, soldering etc
Precautions
sufficiently.
◆Recommended conditions for using a soldering iron (NR10050 Type)
・Put the soldering iron on the land-pattern.
・Soldering iron's temperature - Below 350℃
・Duration - 3 seconds or less
・The soldering iron should not directly touch the inductor.
◆Reflow soldering
1. If products are used beyond the range of the recommended conditions, heat stresses may deform the products, and consequently degrade the reliability of
the products.
300
200
100
0
150∼180
90±30sec
5sec max
Peak：
260＋0/ー5℃
30±10sec
230℃ min
Ｈeating Time【sec】
5sec max
300
200
100
0
Peak：
250＋5/ー0℃
150∼180
90±30sec
30±10sec
230℃ min
Ｈeating Time【sec】
・NR10050 Type
Recommended reflow condition (Pb free solder)
Temperature
［℃］
Temperature
［℃］
Technical
considerations
・NR30/40/50/60/80, NRV30, NRG40,
NRH24/30, NRS50/60 Type
Recommended reflow condition (Pb free solder)
Temperature
［℃］
・BRC1608, BRL2012, BRL2518,
BRC2016, BRL3225 Type BRC2518, BRFL2518
Recommended reflow condition (Pb free solder)
5sec max
300
200
100
0
Peak：
250＋0/ー5℃
150∼180
90±30sec
30±10sec
230℃ min
Ｈeating Time【sec】
5. Cleaning
Precautions
Technical
considerations
◆Cleaning conditions
1. Washing by supersonic waves shall be avoided.
◆Cleaning conditions
1. If washing by supersonic waves, supersonic waves may cause broken products.
6. Handling
◆Handling
1. Keep the product away from all magnets and magnetic objects.
◆Breakaway PC boards (splitting along perforations)
1. When splitting the PC board after mounting product, care should be taken not to give any stresses of deflection or twisting to the board.
2. Board separation should not be done manually, but by using the appropriate devices.
◆Mechanical considerations
Precautions
1. Please do not give the product any excessive mechanical shocks.
2. Please do not add any shock and power to a product in transportation.
◆Pick-up pressure
1. Please do not push to add any pressure to a winding part. Please do not give any shock and push into a ferrite core exposure part.。
◆Packing
1. Please avoid accumulation of a packing box as much as possible.
◆Breakaway PC boards (splitting along perforations)
1. Planning pattern configurations and the position of products should be carefully performed to minimize stress.
◆Mechanical considerations
1. There is a case to be damaged by a mechanical shock.
Technical
2. There is a case to be broken by the handling in transportation.
considerations
◆Pick-up pressure
1. Damage and a characteristic can vary with an excessive shock or stress.
◆Packing
1. There is a case that transformation and a product of tape are damaged by accumulation of a packing box.
7. Storage conditions
◆Storage
1. To maintain the solderability of terminal electrodes and to keep the packing material in good condition, temperature and humidity in the storage area should
be controlled.
・Recommended conditions
Ambient temperature : 0∼40℃
Humidity
: Below 70% RH
Precautions
Technical
considerations
The ambient temperature must be kept below 30℃. Even under ideal storage conditions, solderability of products electrodes may decrease as time passes.
For this reason, product should be used within 6 months from the time of delivery.
In case of storage over 6 months, solderability shall be checked before actual usage.
◆Storage
1. Under a high temperature and humidity environment, problems such as reduced solderability caused by oxidation of terminal electrodes and deterioration of
taping/packaging materials may take place.
＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound0407_reli-RP5
1
wound0407_reli_e-01