BCcomponents DATA SHEET 175 TMP Aluminum electrolytic capacitors High Temperature solid electrolytic SMD Product specification File under BCcomponents, BC01 2001 Jul 05 BCcomponents Product specification Aluminum electrolytic capacitors High Temperature solid electrolytic SMD 175 TMP FEATURES • Polarized aluminum electrolytic capacitors SMD, solid electrolyte MnO2 • Extremely long useful life, 20000 hours/125 °C • Extended usable temperature range up to 175 °C • Excellent impedance and ESR behaviour, at low and high temperature CCA716 • Charge and discharge proof, application with 0 Ω resistance allowed Fig.1 Component outline. • Reverse DC voltage up to 0.5 × UR allowed • AC voltage up to 0.8 × UR allowed • High shock and vibration capability 122 SAL-RP 128 SAL-RPM 125 °C • High ripple current per volume in SMD. APPLICATIONS SMD JW102 • SMD technology 175 TMP • Smoothing, filtering, buffering < ESR • Telecommunications, general industrial, EDP, high end power conversion 176 TMP 200 TMP • Power supplies, SMPS for telecommunications. automotive QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case sizes (L × W × H in mm) 8 × 8 × 10 (0810 housing), 8 × 8 × 8 (0808 housing) 1 to 68 µF Rated capacitance range, CR ±20% Tolerance on CR 4 to 40 V Rated voltage range, UR Category temperature range: UR = 4 to 40 V −55 to +85 °C UC = 4 to 25 V −55 to +125 °C UC = 4 to 16 V −55 to +175 °C Endurance test at 175 °C 1000 hours Endurance test at 125 °C 10000 hours Useful life at 125 °C 20000 hours Useful life at 175 °C 2000 hours Useful life at 40 °C, IR applied >300000 hours Shelf life at 0 V, 125 °C 500 hours Based on sectional specification IEC 60384-4/EN130300 Climatic category IEC 60068 2001 Jul 05 55/175/56 2 BCcomponents Product specification Aluminum electrolytic capacitors High Temperature solid electrolytic SMD 175 TMP Selection chart for CR, UR and relevant nominal case sizes (L × W × H in mm) UR (V) at Tamb = 125 °C CR (µF) 4 6.3 10 Tamb = 85 ° 16 20 25 40 16 16 16 UR (V) at Tamb = 175 °C 4 6.3 10 16 1 − − − − − − 8.0 × 8.0 × 10(8) 1.5 − − − − − − 8.0 × 8.0 × 10(8) 2.2 − − − − − note 1 8.0 × 8.0 × 10(8) 4.7 − − − − 8.0 × 8.0 × 10(8) 8.0 × 8.0 × 10(8) − 6.8 − − − 8.0 × 8.0 × 10(8) 8.0 × 8.0 × 10(8) 8.0 × 8.0 × 10(8) − 10 − − − 8.0 × 8.0 × 10(8) note 1 8.0 × 8.0 × 10(8) − 15 − − 8.0 × 8.0 × 10(8) note 2 note 2 − − 22 − − 8.0 × 8.0 × 10(8) note 2 − − − 33 − 8.0 × 8.0 × 10(8) note 2 − − − − 47 8.0 × 8.0 × 10(8) 8.0 × 8.0 × 10(8) note 2 − − − − 68 8.0 × 8.0 × 10(8) note 2 − − − − − Notes 1. Available on request. 2. Tamb = 125 °C, available on request. 2001 Jul 05 3 BCcomponents Product specification Aluminum electrolytic capacitors High Temperature solid electrolytic SMD 175 TMP PACKAGING Supplied in blister tape on reel. For general packaging information refer to data handbook BC01, section “Packaging”. Table 1 Tape and reel dimensions CASE CODE 0808 0810 PITCH P1 (mm) TAPE WIDTH W (mm) TAPE THICKNESS T2 (mm) REEL DIA. (mm) PACKAGING QUANTITY PER REEL 16 24 11 380 500 MECHANICAL DATA 0.4 ±0.2 L W B C S C D H CCA717 0.3 max. Dimensions in mm. Fig.2 Dimensional outline. Table 2 Physical dimensions, mass and packaging quantities; see Fig.2 NOMINAL CASE SIZE L×W×H (mm) CASE CODE Lmax (mm) Wmax (mm) Hmax (mm) ∅D (mm) Bmax (mm) S (mm) C (mm) MASS (g) 8.0 × 8.0 × 8.0 0808 8.4 8.4 8.7 8.0 1 4.7 2.2 ±0.2 ≈0.75 8.0 × 8.0 × 10 0810 8.4 8.4 10.5 8.0 1 4.7 2.2 ±0.2 ≈0.8 2001 Jul 05 4 BCcomponents Product specification Aluminum electrolytic capacitors High Temperature solid electrolytic SMD 175 TMP MOUNTING The capacitors are designed for automatic placement on to printed-circuit boards. Optimum dimensions of soldering pads depend amongst others on soldering method, mounting accuracy, print lay-out and/or adjacent components. b CCA857 a c a Dimensions in mm. Fig.3 Recommended soldering pad dimensions. For recommended soldering pad dimensions, refer to Fig.3 and Table 3. Soldering Soldering conditions are defined by the curve, temperature versus time, where the temperature is that measured on the soldering pad during processing. Resistant against 260 °C reflow temperature see Fig.4. Any temperature versus time curve which does not exceed the specified maximum curves may be applied. AS A GENERAL PRINCIPLE, TEMPERATURE AND DURATION SHALL BE THE MINIMUM NECESSARY REQUIRED TO ENSURE GOOD SOLDERING CONNECTIONS. Table 3 Recommended soldering pad dimensions CASE CODE 0808 0810 a (mm) b (mm) c (mm) 3.0 2.5 4.0 JW136 280 T PAD o ( C) 260 (1) 240 220 200 180 160 140 120 100 80 0 50 100 150 200 t (s) 250 (1) Maximum permissible reflow temperature. Fig.4 2001 Jul 05 Maximum temperature load during infrared reflow soldering measured on the soldering pad. 5 2001 Jul 05 6 6.3 10 16 20 25 25 10 16 20 25 40 4 IR 50 kHz 85 °C (mA) 1640 1854 1804 1716 999 1350 624 NOMINAL CASE SIZE L×W×H (mm) 8.0 × 8.0 × 10(8) 8.0 × 8.0 × 10(8) 8.0 × 8.0 × 10(8) 8.0 × 8.0 × 10(8) 8.0 × 8.0 × 10(8) 8.0 × 8.0 × 10(8) 8.0 × 8.0 × 10(8) 47 68 33 47 15 22 790 562 8.0 × 8.0 × 10(8) 8.0 × 8.0 × 10(8) 6.8 562 593 790 388 447 468 8.0 × 8.0 × 10(8) 8.0 × 8.0 × 10(8) 8.0 × 8.0 × 10(8) 8.0 × 8.0 × 10(8) 8.0 × 8.0 × 10(8) 6.8 1 1.5 2.2 10 609 8.0 × 8.0 × 10(8) 8.0 × 8.0 × 10(8) 4.7 10 4.7 6.8 CR (µF) 669 651 557 1107 825 778 844 778 1107 863 1786 1391 2459 2540 2540 2319 821 813 692 1322 974 939 995 939 1322 1015 2186 1692 2931 3061 2931 2714 110 107 92 142 174 128 179 128 142 183 290 229 406 419 419 382 2 2 2 4 4 2 2 2 3 3 3 3 5 4 5 3 2.82 3.1 4.1 0.99 1.63 1.96 1.62 1.96 0.99 1.59 0.41 0.62 0.21 0.19 0.18 0.23 2.16 2.28 3.12 0.79 1.33 1.6 1.31 1.6 0.79 1.3 0.31 0.5 0.16 0.15 0.15 0.18 TYP. ESR 100 kHz (Ω ) 1.53 1.56 2.15 0.59 1.02 1.17 1.02 1.17 0.59 1 0.22 0.36 0.12 0.11 0.12 0.14 TYP. ESR 300 kHz (Ω ) 2 0.73 0.71 0.65 0.83 TYP. fres (MHz) 0.74 0.74 0.86 0.38 0.62 0.63 0.59 0.63 0.38 0.59 7.5 7.1 9.6 3.2 4.95 6.4 5.1 6.4 3.2 5.1 0.225 2 0.25 0.11 0.1 0.11 0.12 TYP. Zf res (Ω ) Aluminum electrolytic capacitors High Temperature solid electrolytic SMD 16 16 16 16 10 6.3 4 UC UC 125 °C 175 °C (V) (V) 6.3 4 UR (V) Table 4 TYP. ESR 50 kHz (Ω ) Zf res IR IR IL5 >300 kHz 100 kHz 5 min 25 °C 175 °C (µA) (mA) (mA) typical equivalent series resistance at 100 kHz typical impedance at average resonance frequency ESR IR 100 kHz 40 °C (mA) typical leakage current after 5 minutes at UR Electrical data for 175 series Catalogue number: 2222 175 63479. typical RMS ripple current no necessary DC voltage applied IR IL5 CR Nominal case size: 8 × 8 × 10 mm; taped on reel 47 µF/6.3 V; ±20% rated capacitance at 100 Hz, tolerance ±20% DESCRIPTION Electrolytic capacitor 175 series Unless otherwise specified, all electrical values in Table 4 apply at Tamb = 20 °C, P = 86 to 106 kPa, RH = 45 to 75%. SYMBOL Ordering example ELECTRICAL DATA BCcomponents Product specification 175 TMP BCcomponents Product specification Aluminum electrolytic capacitors High Temperature solid electrolytic SMD 175 TMP ORDERING INFORMATION Table 5 Ordering informationfor 175 series UR (V) UC 125 °C (V) UC 175 °C (V) 4 4 4 CR (µF) 47 68 6.3 6.3 6.3 33 47 10 10 10 15 22 16 16 16 6.8 10 20 20 16 4.7 6.8 25 25 16 4.7 6.8 10 40 25 16 1 1.5 2.2 2001 Jul 05 NOMINAL CASE SIZE L×W×H (mm) CASE CODE CATALOGUE NUMBER 2222 ... ..... 8.0 × 8.0 × 10 0810 175 62479 8.0 × 8.0 × 8.0 0808 175 52479 8.0 × 8.0 × 10 0810 175 62689 8.0 × 8.0 × 8.0 0808 175 52689 8.0 × 8.0 × 10 0810 175 63339 8.0 × 8.0 × 8.0 0808 175 53339 8.0 × 8.0 × 10 0810 175 63479 8.0 × 8.0 × 8.0 0808 175 53479 8.0 × 8.0 × 10 0810 175 64159 8.0 × 8.0 × 8.0 0808 175 54159 8.0 × 8.0 × 10 0810 175 64229 8.0 × 8.0 × 8.0 0808 175 54229 8.0 × 8.0 × 10 0810 175 65688 8.0 × 8.0 × 8.0 0808 175 55688 8.0 × 8.0 × 10 0810 175 65109 8.0 × 8.0 × 8.0 0808 175 55109 8.0 × 8.0 × 10 0810 175 68478 8.0 × 8.0 × 8.0 0808 175 58478 8.0 × 8.0 × 10 0810 175 68688 8.0 × 8.0 × 8.0 0808 175 58688 8.0 × 8.0 × 10 0810 175 66478 8.0 × 8.0 × 8.0 0808 175 56478 8.0 × 8.0 × 10 0810 175 66688 8.0 × 8.0 × 8.0 0808 175 56688 8.0 × 8.0 × 10 0810 175 66109 8.0 × 8.0 × 8.0 0808 175 56109 8.0 × 8.0 × 10 0810 175 67108 8.0 × 8.0 × 8.0 0808 175 57108 8.0 × 8.0 × 10 0810 175 67158 8.0 × 8.0 × 8.0 0808 175 57158 8.0 × 8.0 × 10 0810 175 67228 8.0 × 8.0 × 8.0 0808 175 57228 7 BCcomponents Product specification Aluminum electrolytic capacitors High Temperature solid electrolytic SMD 175 TMP ADDITIONAL ELECTRICAL DATA PARAMETER CONDITIONS VALUE Voltage Us ≤ 1.15 × UR Surge voltage Reverse voltage Tamb = 85 °C: at UR = 4 to 16 V Urev < 0.5 UR at UR = 20 V Urev < 0.4 UR at UR = 25 to 40 V Urev < 0.3 UR Tamb = 125 °C: at UR = 4 to 16 V Urev < 0.4 UR at UR = 20 V Urev < 0.2 UR at UR = 25 to 40 V Urev < 0.1 UR Tamb = 175 °C: at UR = 4 to 16 V Urev < 0.3 UR at UR = 20 V Urev < 0.15 UR at UR = 25 to 40 V Urev < 0.1 UR Maximum peak AC voltage reverse voltage applied Maximum peak AC voltage, without reverse voltage applied Tamb = 85 °C: at f ≤ 0.1 Hz ≤2 V 0.30 × UR at 0.1 Hz < f ≤ 1 Hz 0.45 × UR at 1 Hz < f ≤ 10 Hz 0.60 × UR at 10 Hz < f ≤ 50 Hz 0.65 × UR at f > 50 Hz 0.80 × UR 85 °C < Tamb ≤ 125 °C: at f ≤ 0.1 Hz 0.15 × UR at 0.1 Hz < f ≤ 1 Hz 0.22 × UR at 1 Hz < f ≤ 10 Hz 0.30 × UR at 10 Hz < f ≤ 50 Hz 0.32 × UR at f > 50 Hz 0.40 × UR 125 °C ≤ Tamb ≤ 175 °C: at f < 50 Hz 0.1 × UR at f > 50 Hz 0.2 × UR Inductance Equivalent series inductance (ESL) case sizes 8 × 8 × 10(8) mm typ. 9 to 14 nH case sizes 8 × 8 × 10(8) mm P = 350 mW; Tamb = 125 °C after 5 minutes at UR and Tamb = 25 °C see Table 4 Dissipation Maximum power dissipation Current Maximum leakage current 2001 Jul 05 8 BCcomponents Product specification Aluminum electrolytic capacitors High Temperature solid electrolytic SMD 175 TMP Voltage JW108 40 (1) (2) 35 UR (V) 25 20 16 10 6.3 4 0 −50 0 50 85 100 125 150 175 Tamb (°C) (1) UC = 125 °C. (2) UC = 175 °C. Fig.5 Maximum permissible voltage up to Tamb = 175 °C. Ripple current (IR) Applying the maximum RMS ripple current given in Table 4 will cause a device temperature of 175 °C. PARAMETER IR multiplier; 100 kHz 2001 Jul 05 Tamb 40 °C 85 °C 105 °C 125 °C 150 °C 175 °C 1.0 0.87 0.78 0.67 0.5 0.16 9 BCcomponents Product specification Aluminum electrolytic capacitors High Temperature solid electrolytic SMD 175 TMP Capacitance (C) JW103 1.2 C C0 1.1 standard deviation σ 1.0 0.9 0.8 0.05 σ 0 0.7 0.6 80 40 0 40 80 120 160 200 T amb ( oC) C0 = capacitance at 25 °C and 100 Hz. Fig.6 Typical multiplier of capacitance and standard deviation as functions of ambient temperature. Dissipation factor (tan δ) JW104 2.0 tan δ tan δ 0 standard deviation σ 1.5 1.0 0.5 0.5 σ 0 0 – 80 – 40 0 Tan δ0 = dissipation factor at Tamb = 25 °C and 100 Hz. 40 80 120 160 T amb ( oC) Fig.7 Typical multiplier of dissipation factor and standard deviation as functions of ambient temperature. 2001 Jul 05 10 200 BCcomponents Product specification Aluminum electrolytic capacitors High Temperature solid electrolytic SMD 175 TMP Leakage current 10 MGB019 2 I I0 10 1 10 1 40 0 40 80 160 120 T amb ( oC) I0 = leakage current during continuous operation at UR and Tamb = 25 °C. Fig.8 Typical multiplier of leakage current as a function of ambient temperature. Equivalent series resistance (ESR) JW105 10 ESR (Ω) 3 2 1 1 0.1 Curve 1: 47 µF, 4 V. Curve 2: 33 µF, 6.3 V. Curve 3: 22 µF, 10 V. Tamb = 125 °C. 0.01 10 2 10 3 10 4 Fig.9 Typical ESR as a function of frequency at 125 °C. 2001 Jul 05 11 10 5 f (Hz) 10 6 BCcomponents Product specification Aluminum electrolytic capacitors High Temperature solid electrolytic SMD 175 TMP JW137 ESR ESR 0 1.5 1.4 1.3 1.2 1.1 1 0.9 0.8 0.7 0.6 0.5 −50 50 0 100 175 T amb ( oC) 150 Fig.10 ESR correction multiplier as a function ot temperature. Impedance (Z) JW138 Z Z0 1.5 1.4 1.3 1.2 1.1 1 0.9 0.8 0.7 0.6 0.5 −50 0 50 100 Fig.11 Ζ correction multiplier as a function of temperature. 2001 Jul 05 12 175 T amb ( oC) 150 BCcomponents Product specification Aluminum electrolytic capacitors High Temperature solid electrolytic SMD 175 TMP SPECIFIC TESTS AND REQUIREMENTS General tests and requirements are specified in data handbook BC01, section “Tests and Requirements”. Table 6 Test procedures and requirements TEST NAME OF TEST Mounting Endurance Useful life REFERENCE IEC 60384-18, subclause 4.3 IEC 60384-4/ EN130300 subclause 4.13 CECC 30302 subclause 1.8.1 PROCEDURE (quick reference) REQUIREMENTS(1) shall be performed prior to tests mentioned below; reflow soldering; for maximum temperature load refer to chapter “Mounting” ∆C/C: ±10% Tamb = 125 °C; UR = 4 to 25 V with UR applied; UR = 40 V with UC applied; 10 000 hours ∆C/C: ±10% Tamb = 175 °C; UR = 4 to 16 V with UR applied; UR = 20 to 40 V with UC applied; 1 000 hours IL5 ≤ spec. limit Tamb = 175 °C; IR applied and: UR = 4 to 16 V with UR applied; UR = 20 and 40 V with UC applied; 2000 hours ∆C/C: ±15% tan δ ≤ spec. limit IL2 ≤ spec. limit tan δ ≤ 1.2 × spec. limit Z ≤ 1.2 × spec. limit tan δ ≤ 1.5 × spec. limit Z ≤ 1.5 × spec. limit IL5 ≤ spec. limit no short or open circuit, no visible damage total failure percentage: <1% Shelf life (storage at high temperature) IEC 60384-4/ EN130300 subclause 4.17 Tamb = 85 °C; no voltage applied; 5000 hours ∆C/C: ±10% Charge and discharge IEC 60384-4-2 subclause 9.21 106 cycles without series resistance: 0.5 s to UR; 0.5 s to ground ∆C/C: ±5% Solvent resistance IEC 60068-2-45, test XA IEC 60653 immersion: 5 ±0.5 minutes with or without ultrasonic at 55 ±5 °C visual appearance not affected 2001 Jul 05 tan δ ≤ 1.2 × spec. limit IL5 ≤ 1 × spec. limit solvents: demineralized water and/or calgonite solution (20 g/l) 13 no short or open circuit, no visible damage BCcomponents Product specification Aluminum electrolytic capacitors High Temperature solid electrolytic SMD TEST NAME OF TEST Vibration PROCEDURE (quick reference) REFERENCE IEC 60068-2-6 test Fc 175 TMP REQUIREMENTS(1) no intermittent contacts 10 to 2000 Hz; 1.5 mm or 20 g; 1 octave/minute; 3 directions; no breakdown 1 sweep per direction; no voltage applied no open circuiting no mechanical damage ∆C/C: ±5% tan δ ≤ 1.2 × spec. limit Z ≤ 1.2 × spec. limit IL5 ≤ 1.5 × spec. limit Shock IEC 60068-2-27 test Ea half-sine or sawtooth pulse shape; 50 g; 11 ms; 3 successive shocks in each direction of 3 mutually perpendicular axes; no voltage applied no intermittent contacts no breakdown no open circuiting no mechanical damage ∆C/C: ±5% tan δ ≤ 1.2 × spec. limit Z ≤ 1.2 × spec. limit IL5 ≤ 1.5 × spec. limit Bump Passive flammability IEC 60384-4/ EN 130300 subclass 4.9 40 g; 2 directions; 4000 bumps total IEC 60695-2-2 capacitor mounted to a vertical printed-circuit board, one flame on capacitor body; Tamb = 20 to 25 °C; test duration = 20 s no visible damage ∆C/C: ±5% with respect to initial measurement after removing the test flame from the capacitor, the capacitor must not continue to burn for more than 15 s; no burning particles must drop from the sample Note 1. Specification limits on request. MARKING • Rated capacitance (in µF) • Rated voltage (in V) • Black mark or ‘−’ sign indicating the cathode (the anode is identified by bevelled edges) • Code indicating group number (V) HT • Date code, in accordance with “IEC 60062”. 2001 Jul 05 14