Mobile RF: LPC SP1 T he LPC SP1 is the waterproof version of the LPC CP1/CP2 RF switchable connector. It features a special seal, allowing it to be IP67 compliant (1 meter of water). These connectors are ideal for small handsets. They offer high performance in a very compact design with a unique cold pin to minimize the RF emissions in unmated conditions. Applications: • Mobile Phones • Portable Radio • Portable Satellite • PDA For more information: www.ittcannon.com/cat269 Product Features • Sealed to IP67. • Cold pin to minimize RF emissions • 0.2 g weight. • 100% checked on assembly. • Low profile of 5,6 mm. in unmated conditions. • Seal to prevent dust and water penetration. • Standard tape and reel packaging. Performance Specifications VSWR 12,000 mating cycles min. Battele class II Up to IP67 0.8 to 2 GHz Operable in 90% relative humidity, temp. 40°C (104°F) 50 Ω nominal At 0.8 to 2 GHz <0.1 dB 4 N and <7 N 0.95 mm Tape & Reel, 1000 pieces per reel In accordance with IEC 68-2-11, Method Ka 105 g (force) 6 directions over 3 axis Hand soldering, Infrared reflow soldering –40°C and 85°C (–40°F to 185°F) +3 dB/octave 20 to 80 Hz 0.53 g 2/Hz 80 to 350 Hz +3 dB/octave 350 to 2000 Hz At 2000 MHz ≤1.2:1 Mobile Connector Durability Corrosive Atmosphere Environmental Sealing Frequency Range Humidity Impedance Insertion Loss Mating Force of Ground Offset Mating Packaging Salt Spray Shock Solder System Temperature Rating Vibration Materials and Finishes Description Shell Insulator Contact, Moving Contact, Fixed Cold Pin Gasket Seal Material Brass LPC Beryllium Copper Brass Brass Silicone Rubber Rubber Finish Gold Color: Black Gold Gold Gold — — Please contact your local Cannon representative: www.ittcannon.com/support/ContactUs Dimensions are shown in mm (inch) Dimensions subject to change Version 05.01.03 M-15 www.ittcannon.com