COILCRAFT LPO6610

Document 333-1
SMT Power Inductors - LPO6610 Series
• Very low profile - only 1.0 mm high!
• Handles current up to 1.7 Amps rms
Designer’s Kit C367 contains 3 each of all values
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Terminations RoHS compliant silver-palladium-platinum-glass frit.
Other terminations available at additional cost.
Weight 91.0 – 95.0 mg
Ambient temperature –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature Component: –40°C to +125°C.
Packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 1000/7″reel Plastic tape: 12 mm wide, 0.3 mm thick,
8 mm pocket spacing, 1.2 mm pocket depth
PCB washing Only pure water or alcohol recommended
Part number1
L2
DCR
±20% max
(µH) (Ohms)
LPO6610-122ML_
1.2
0.08
LPO6610-152ML_
1.5
0.10
LPO6610-222ML_
2.2
0.12
LPO6610-332ML_
3.3
0.16
LPO6610-472ML_
4.7
0.20
LPO6610-682ML_
6.8
0.32
LPO6610-103ML_
10
0.41
LPO6610-153ML_
15
0.55
LPO6610-223ML_
22
0.85
LPO6610-333ML_
33
1.3
LPO6610-473ML_
47
1.8
LPO6610-683ML_
68
2.5
LPO6610-104ML_ 100
3.5
LPO6610-154ML_ 150
5.0
LPO6610-224ML_ 220
7.0
LPO6610-334ML_ 330
15.0
SRF
typ
(MHz)
190
140
115
90
88
66
55
42
38
29
22
18
14
12
10
8
1. When ordering, please specify termination and packaging codes:
Isat3
(A)
2.1
1.9
1.6
1.3
1.1
0.90
0.80
0.65
0.50
0.40
0.35
0.30
0.25
0.18
0.16
0.13
Irms4
(A)
1.7
1.5
1.4
1.2
1.1
0.85
0.75
0.60
0.52
0.42
0.36
0.30
0.26
0.21
0.18
0.13
LPO6610-334MLC
Termination: L = RoHS compliant silver-palladium-platinum-glass frit.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic
tape (1000 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter C instead.
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc using an Agilent/HP
4263B LCR meter or equivalent.
3. DC current at which the inductance drops 10% (typ) from its value
without current.
4. Current that causes a 40°C temperature rise from 25°C ambient.
5. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Specifications subject to change without notice.
Please check our website for latest information.
© Coilcraft, Inc. 2009
Document 333-1
Revised 10/15/08
Document 333-2
SMT Power Inductors - LPO6610 Series
Typical L vs Frequency
Typical L vs Current
1000
1000
100 µH
Inductance (µH)
Inductance (µH)
100 µH
100
100
10 µH
10
10 µH
10
1.2 µH
1.2 µH
1
1
0.1
0.1
0.01
1
0.1
10
0.01
10
Current (A)
Irms Derating
Dash number
0.270
6,90
XXX
120
110
X
100
90
0.100
2,50
0.150
3,80
0.185
4,70
Internal code
80
0.040 ±0.004
1,00 ±0,10
70
Recommended
Land Pattern
60
50
0.192
4,90
40
25°C
Percent of rated Irms
1
0.1
Frequency (MHz)
30
0.029
0,750
20
0.216
max
5,50
10
0.100
2,54
0.134
3,40
0
-40
-20
0
20
40
60
80
100
120 140
Ambient temperature (°C)
0.260
max
6,60
Dimensions are in
inches
mm
Specifications subject to change without notice.
Please check our website for latest information.
© Coilcraft, Inc. 2009
Document 333-2
Revised 10/15/08