Axial Lead & Cartridge Fuses 5×20 mm > Time-Lag > 219XA Series 219XA Series, PS E 5x20mm, Time-Lag (Slo-Blo®) Fuse Description 5x20mm time-Lag glass body cartridge fuse designed to IEC specification Features Agency Approvals Agency File Number PS E Cartridge Certifications: NBK220604-E10480A NBK230604-E10480A Leaded Certifications: NBK220604-E10480B NBK230604-E10480B Certifications: 2004010207110266 2003010207079982 Recognised File: E10480 Guide: JDYX2 t "WBJMBCMFJODBSUSJEHF and axial lead form t .FFUTUIF*&$ 60127-2, Sheet 6 t 3P)4DPNQMJBOUBOE lead-free Applications Ampere Range Used as supplementary protection in appliance or utilization equipment to provide individual protection for components or internal circuits. 1A – 5A 6.3A 1A – 5A 6.3A Electrical Characteristics for Series 125mA – 800mA 1A – 6.3A % of Ampere Rating 150% 40mA – 6.3A 210% File and Acc. Class: 029862_0_000 License: KM41462 File: 604904/604924 402708 310144 License: 40016080 275% 125mA – 6.3A 400% 40mA – 100mA 125mA – 800mA 1A – 6.3A 1000% 125mA – 6.3A Ampere Rating Opening Time 40mA – 100mA 1 hours, Minimum 125mA – 6.3A 1 hours, Minimum 40mA – 100mA 2 minutes, Maximum 125mA – 6.3A 2 minutes, Maximum 40mA – 100mA 0.2 sec., Min; 10 sec. Max 125mA – 6.3A 0.6 sec., Min; 10 sec. Max 40mA – 100mA 0.04 sec., Min; 3 sec. Max 125mA – 6.3A .15 sec., Min; 3 sec. Max 40mA – 100mA .01 sec., Min; 0.3 sec. Max 125mA – 6.3A .02 sec., Min; 0.3 sec. Max 40mA – 6.3A © 2009 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/219XA.html for current information. 277 Revised: January 7, 2009 219XA Series 219XA Series Agency specification for timeLag fuses t %FTJHOFEUP International (IEC ) Standards for use globally Introduction to & Circuit Protection Axial Lead Cartridge Fuses 5×20 mm > Time-Lag >Transientology 219XA Series Electrical Characteristic Specifications by Item Nominal Melting I2t (A2 sec) Nominal Voltage Drop at Rated Current (mV) Nominal Power Dissipation at Rated Current (W) Agency Approvals Amp Code Nominal Amp Voltage Interrupting Cold Rating Rating Rating Resistance (A) (V) (Ohms) .040 0.040 250 31.8620 0.01100 4000 1.6 x x x .050 0.050 250 21.2920 0.01700 3500 1.6 x x x .063 0.063 250 14.2685 0.02850 3000 1.6 x x x .100 0.100 250 6.0180 0.07900 2500 1.6 x x x .125 0.125 250 4.2000 0.13000 2000 1.6 x x x x x x x .160 0.160 250 2.5500 0.31000 1900 1.6 x x x x x x x .200 0.200 250 1.6000 0.32000 1500 1.6 x x x x x x x .250 0.250 250 1.0495 0.54000 1300 1.6 x x x x x x x .315 0.315 250 0.8475 1.23000 1100 1.6 x x x x x x x PS E .400 0.400 250 0.5350 1.40000 1000 1.6 x x x x x x x .500 0.500 250 0.3700 3.00000 900 1.6 x x x x x x x 0.2750 4.82000 300 1.6 x x x x x x x 0.1635 9.35000 250 1.6 x x x x x x x .630 0.630 250 .800 0.800 250 150A @ 250VAC 001. 1.00 250 0.1165 19.20000 150 1.6 x x x x x x x x 1.25 1.25 250 0.0817 27.15000 150 1.6 x x x x x x x x 01.6 1.60 250 0.0551 44.20000 150 1.6 x x x x x x x x 002. 2.00 250 0.0452 92.70500 150 1.6 x x x x x x x x 02.5 2.50 250 0.0305 138.00000 120 1.6 x x x x x x x x 3.15 3.15 250 0.0231 202.00000 100 1.6 x x x x x x x x 004. 4.00 250 0.0158 330.00000 100 1.6 x x x x x x x x 005. 5.00 250 0.0117 544.00000 100 1.6 x x x x x x x x 06.3 6.3 250 0.0117 1093.03500 100 1.6 x x x x x x x x 219XA Series 278 Revised: January 7, 2009 © 2009 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/219XA.html for current information. Axial Lead & Cartridge Fuses 5×20 mm > Time-Lag > 219XA Series 2.5A 3.15A 4A 5A 6.3A Average Time Current Curves 0.125A 0.160A 0.200A 0.250A 0.315A 0.400A 0.500A 0.630A 0.800A 1A 1.25A 1.6A 2A Temperature Rerating Curve 10000 1000 TIME IN SECONDS 100 10 1 0.1 0.01 0.001 0.01 1 10 100 1000 CURRENT IN AMPERES Soldering Parameters - Wave Soldering 260 Wave Parameter 240 220 200 Preheat: 180 (Depends on Flux Activation Temperature) 160 140 120 100 80 60 40 Lead-Free Recommendation (Typical Industry Recommendation) Temperature Minimum: 100° C Temperature Maximum: Preheat Time: 150° C 60-180 seconds Solder Pot Temperature: 260° C Maximum Solder Dwell Time: 2-5 seconds 240 230 220 210 200 190 180 170 160 140 150 130 120 110 90 100 80 70 60 50 40 30 0 0 20 20 Recommended Hand-Solder Parameters: Time (Seconds) Cooling Time Preheat Time Solder Iron Temperature: 350° C +/- 5°C Heating Time: 5 seconds max. Dwell Time Note: These devices are not recommended for IR or Convection Reflow process. © 2009 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/219XA.html for current information. 279 Revised: January 7, 2009 219XA Series 219XA Series Recommended Process Parameters: 280 10 Temperature (°C) - Measured on bottom side of board 300 Introduction to & Circuit Protection Axial Lead Cartridge Fuses 5×20 mm > Time-Lag >Transientology 219XA Series Product Characteristics Materials Body: Glass Cap: Nickel Plated Brass Leads: Tin Plated Copper Operating Temperature –55ºC to +125ºC Terminal Strength MIL-STD-202G, Method 211A. Test Condition A Shock MIL-STD-202G, Method 107G, Test Condition B: (5 cycles –65OC to +125OC) Solderability Reference IEC 60127 Second Edition 2003-01 Annex A Vibration MIL-STD-202G, Method 201A Product Marking Cap 1: Brand logo, current and voltage rating Cap 2: Agency approval markings Series Humidity MIL-STD-202G, Method 103B, Test Condition A high RH (95%) and elevated temperature (40O C) for 240 hours. Packaging Available in Bulk (M=1000 pcs/pkg) or on Tape/Reel (MRET1=1000 pcs/reel) Salt Spray MIL-STD-202F Method 101D, Test Condition B Dimensions Part Numbering System 5.2+0.1 -0.2 5.1+0.6 0219000XAEP 0219 xxxx M XA E P 20+0.5 0219 000XAP 40 Series 5.1+0.6 22.5 MAX Amp Code Refer to Amp Code column of Electrical Characteristics Table 5.8 MAX Quantity Code M = 1000 0.65* Packaging Code All dimensions in mm X = Filler A = Enhanced l sq t Notes: * Ratings above 6.3A have 0.8 mm dia lead Option Codes Blank : Cartidge Type Fuse E : Axial Leaded Fuse Lead-free Packaging Packaging Option 219XA Series Bulk Bulk Reel and Tape 219XA Series Packaging Specification Quantity Quantity & Packaging Code Taping Width N/A N/A N/A 1000 1000 1000 MXA MXAE MRAET1 N/A N/A T1=52mm (2.062”) 280 Revised: January 7, 2009 © 2009 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/219XA.html for current information.