LINER LTC1728HS5-5

LTC1727/LTC1728
Micropower Precision
Triple Supply Monitors
in 8-Lead MSOP and
5-Lead SOT-23 Packages
Description
Features
Monitors Three Inputs Simultaneously
LTC1727-5: 5V, 3.3V and ADJ
LTC1727-2.5: 2.5V, 3.3V and ADJ
LTC1728-5: 5V, 3.3V and ADJ
LTC1728-2.5: 2.5V, 3.3V and ADJ
LTC1728-1.8: 3V, 1.8V and ADJ
LTC1728-3.3: 3.3V, 1.8V and ADJ
n ±1.5% Threshold Accuracy Over Temperature
n Very Low Supply Current: 10µA Typ
n 200ms Reset Time Delay
n Active Low RESET Output
n Power Supply Glitch Immunity
nGuaranteed RESET for V
CC3 ≥ 1V
or VCC5 /VCC25/VCC18 ≥ 1V
n LTC1727 Includes Monitor Output for Each Supply
n LTC1727: 8-Lead MSOP and SO Packages
n LTC1728: 5-Lead SOT-23 Package
n
Applications
n
n
n
n
n
The LTC®1727 is a triple supply monitor intended for
systems with multiple supply voltages. Each supply monitor has its own open-drain output for individual supply
monitoring. A common open-drain reset output remains
low until all three supplies have been in compliance for
200ms. Tight 1.5% accuracy specifications and glitch
immunity ensure reliable reset operation without false
triggering.
The LTC1728 is functionally identical to the LTC1727
without the individual monitor outputs.
The RST output is guaranteed to be in the correct state
for VCC5 /VCC25/VCC18 or VCC3 down to 1V. The LTC1727/
LTC1728 may also be configured to monitor any one or
two VCC inputs instead of three, depending on system
requirements.
Very low (10µA typical) supply current makes the LTC1727/
LTC1728 ideal for power conscious systems.
The LTC1727 is available in an 8-lead MSOP or SO package and the LTC1728 is available in a 5-lead SOT-23
package.
Desktop Computers
Notebook Computers
Intelligent Instruments
Portable Battery-Powered Equipment
Network Servers
L, LT, LTC and LTM are registered trademarks of Linear Technology Corporation.
All other trademarks are the property of their respective owners.
Typical Application
DC/DC
CONVERTER
3.3V
5V
1.8V
SYSTEM
LOGIC
5
VCC3
RST
Triple Supply Monitor with Power Good Output
(3.3V, 2.5V and Adjustable)
1
3.3V
LTC1728-5
0.1µF
0.1µF
4
VCC5
R1
61.9k
1% 3
VCCA
R2
100k
1%
2.5V
GND
1727/28 TA01
2
ADJUSTABLE
SUPPLY
R1
1
2
3
R2
4
LTC1727-2.5
VCC3
COMP3
VCC25 COMP25
VCCA
RST
GND
COMPA
8
R3
10k
7
6
R4
10k
POWER
GOOD
SYSTEM
RESET
5
1727/28 TA08
17278fb
1
LTC1727/LTC1728
Absolute Maximum Ratings
(Notes 1. 2)
VCC3, VCC5 /VCC25/VCC18, VCCA ......................... – 0.3V to 7V
RST.............................................................. – 0.3V to 7V
COMPA, COMP3, COMP25/COMP5
(MS8 and SO-8 Only).............................. – 0.3V to 7V
Operating Temperature Range
LTC1727/LTC1728E (Note 3)................ – 40°C to 85°C
LTC1728H...........................................– 40°C to 125°C
LTC1727I..............................................– 40°C to 85°C
Storage Temperature Range................... – 65°C to 150°C
Lead Temperature (Soldering, 10 sec).................. 300°C
Pin Configuration
TOP VIEW
TOP VIEW
VCC3
VCC5/VCC25
VCCA
GND
1
2
3
4
8
7
6
5
COMP3
COMP25/COMP5
RST
COMPA
MS8 PACKAGE
8-LEAD PLASTIC MSOP
VCC3 1
VCC5/
2
VCC25
VCCA 3
8
6
COMP3
COMP25/
COMP5
RST
GND 4
5
COMPA
7
TOP VIEW
RST 1
S5 PACKAGE
5-LEAD PLASTIC SOT-23
TJMAX = 125°C, θJA = 250°C/W
TJMAX = 125°C, θJA = 150°C/W
ORDER
PART NUMBER
MS8
ORDER
PART MARKING PART NUMBER
LTC1727EMS8-2.5
LTC1727EMS8-5
LTHY
LTHX
VCC5/
4 VCC25/
VCC18
VCCA 3
S8 PACKAGE
8-LEAD PLASTIC SO
TJMAX = 125°C, θJA = 200°C/W
5 VCC3
GND 2
S8
PART MARKING
ORDER
PART NUMBER
S5
PART MARKING
172725
727I25
17275
172715
LTC1728ES5-1.8
LTC1728ES5-2.5
LTC1728ES5-3.3
LTC1728ES5-5
LTC1728HS5-5
LTPH
LTIA
LTYP
LTHZ
LTHZ
LTC1727ES8-2.5
LTC1727IS8-2.5
LTC1727ES8-5
LTC1727IS8-5
Order Options Tape and Reel: Add #TR Lead Free: Add #PBF Lead Free Tape and Reel: Add #TRPBF
Lead Free Part Marking: http://www.linear.com/leadfree/
Consult LTC Marketing for parts specified with wider operating temperature ranges.
ELECTRICAL
CHARACTERISTICS
All except LTC1728-1.8/LTC1728-3.3. The l denotes specifications which
apply over the full operating temperature range, otherwise specifications are at TA = 25°C. VCC3 = 3.3V, VCC5 = 5V,
VCC25 = 2.5V, VCCA = VCC3 unless otherwise noted.
SYMBOL PARAMETER
CONDITIONS
MIN
TYP
MAX UNITS
VRT3
Reset Threshold VCC3
VCC3 Input Threshold
l
3.036
3.086
3.135
V
VRT5
Reset Threshold VCC5
VCC5 Input Threshold (5V Version)
l
4.600
4.675
4.750
V
VRT25
Reset Threshold VCC25
VCC25 Input Threshold (2.5V Version)
l
2.300
2.338
2.375
V
VRTA
Reset Threshold VCCA
VCCA Input Threshold
l
0.985
1.000
1.015
V
VCCOP
VCC3, VCC5 /VCC25 Operating Voltage
RST, COMP3, COMP5, COMP25 in Correct Logic State
l
1
7
V
VCCOPA
VCC3, VCC5 /VCC25 Operating Voltage
Minimum Supply Voltage to Guarantee COMPA
in Correct Logic State
l
2.3
V
2
17278fb
2
LTC1727/LTC1728
Electrical
Characteristics
All except LTC1728-1.8/LTC1728-3.3. The l denotes specifications which
apply over the full operating temperature range, otherwise specifications are at TA = 25°C. VCC3 = 3.3V, VCC5 = 5V,
VCC25 = 2.5V, VCCA = VCC3 unless otherwise noted.
SYMBOL PARAMETER
CONDITIONS
MIN
TYP
MAX UNITS
IVCC3
VCC3 Supply Current
VCC5/VCC25 > VCC3
VCC5/VCC25 < VCC3, VCC3 = 3.3V (Note 4)
l
l
1
10
2
20
µA
µA
IVCC25
VCC25 Supply Current
VCC25 < VCC3, VCC25 = 2.5V (Note 4)
l
1
2
µA
IVCC5
VCC5 Supply Current
VCC5 = 5V, VCC3 < VCC5
l
10
20
µA
IVCCA
VCCA Input Current
VCCA = 1V
–40°C < TA < 125°C
l
l
–15
–20
0
0
15
50
nA
nA
tRST
Reset Pulse Width
RST Low with 10k Pull-Up to VCC3 (Note 5)
–40°C < TA < 125°C
l
l
140
140
200
280
350
ms
ms
tUV
VCC Undervoltage Detect to RST
or COMPX
VCC5, VCC25, VCC3 or VCCA Less Than Reset
Threshold VRT by More Than 1% (Note 5)
VOL
Output Voltage Low, RST, COMPX
ISINK = 2.5mA, VCC3 = 3V, VCC5 /VCC25 = 0V
ISINK = 100µA, VCC3 = 1V, VCC5 /VCC25 = 0V
ISINK = 100µA, VCC3 = 0V, VCC5 /VCC25 = 1V
ISINK = 100µA, VCC3 = 1V, VCC5 /VCC25 = 1V
VOH
Output Voltage High, RST, COMPX (Note 6) ISOURCE = 1µA
110
µs
0.15
0.05
0.05
0.05
l
l
l
l
0.4
0.3
0.3
0.3
l VCC3 – 1
V
V
V
V
V
LTC1727-5/LTC1728-5 Only
VOVR
VCC5 Reset Override Voltage (Note 7)
Override VCC5 Ability to Assert RST
VCC3 ±0.025
V
LTC1728-1.8 The l denotes specifications which apply over the full operating temperature range, otherwise specifications are at
TA = 25°C. VCC3 = 3V, VCC18 = 1.8V, VCCA = VCC3 unless otherwise noted.
SYMBOL
PARAMETER
CONDITIONS
MIN
TYP
MAX
UNITS
VRT3
Reset Threshold VCC3
VCC3 Input Threshold
l
2.760
2.805
2.850
V
VRT18
Reset Threshold VCC18
VRTA
Reset Threshold VCCA
VCC18 Input Threshold
l
1.656
1.683
1.710
V
VCCA Input Threshold
l
0.985
1.000
1.015
V
VCCOP
VCC3, VCC18 Operating Voltage
RST in Correct Logic State
l
1
7
V
IVCC3
VCC3 Supply Current
VCC18 > VCC3
VCC18 < VCC3, VCC3 = 3V (Note 4)
l
l
1
10
2
20
µA
µA
IVCC18
VCC18 Supply Current
VCC18 < VCC3, VCC18 = 1.8V (Note 4)
l
1
2
µA
IVCCA
VCCA Input Current
VCCA = 1V
l
–15
0
15
nA
tRST
Reset Pulse Width
RST Low (Note 5)
l
140
200
280
ms
tUV
VCC Undervoltage Detect to RST
VCC18, VCC3 or VCCA Less Than Reset (Note 5)
Threshold VRT by More Than 1%
VOL
Output Voltage Low, RST
ISINK = 2.5mA, VCC3 = 3V, VCC18 = 0V
ISINK = 100µA, VCC3 = 1V, VCC18 = 0V
ISINK = 100µA, VCC3 = 0V, VCC18 = 1V
ISINK = 100µA, VCC3 = 1V, VCC18 = 1V
l
l
l
l
VOH
Output Voltage High, RST
ISOURCE = 1µA (Note 6)
l
110
0.15
0.05
0.05
0.05
VCC3 – 1
µs
0.4
0.3
0.3
0.3
V
V
V
V
V
17278fb
3
LTC1727/LTC1728
Electrical Characteristics
LTC1728-3.3 The l denotes specifications which apply over the full operating temperature range, otherwise specifications are at
TA = 25°C. VCC3 = 3.3V, VCC18 = 1.8V, VCCA = VCC3 unless otherwise noted.
SYMBOL
PARAMETER
CONDITIONS
MIN
TYP
MAX
UNITS
VRT3
Reset Threshold VCC3
VCC3 Input Threshold
l
3.036
3.086
3.135
V
VRT18
Reset Threshold VCC18
VCC18 Input Threshold
l
1.656
1.683
1.710
V
VRTA
Reset Threshold VCCA
VCCA Input Threshold
l
0.985
1.000
1.015
V
VCCOP
VCC3, VCC18 Operating Voltage
RST in Correct Logic State
l
1
7
V
IVCC3
VCC3 Supply Current
VCC18 > VCC3
VCC18 < VCC3, VCC3 = 3.3V (Note 4)
l
l
1
10
2
20
µA
µA
IVCC18
VCC18 Supply Current
VCC18 < VCC3, VCC18 = 1.8V (Note 4)
l
1
2
µA
IVCCA
VCCA Input Current
VCCA = 1V
l
–15
0
15
nA
tRST
Reset Pulse Width
RST Low (Note 5)
l
140
200
280
ms
tUV
VCC Undervoltage Detect to RST
VCC18, VCC3 or VCCA Less Than Reset (Note 5)
Threshold VRT by More Than 1%
VOL
Output Voltage Low, RST
ISINK = 2.5mA, VCC3 = 3.3V, VCC18 = 0V
ISINK = 100µA, VCC3 = 1V, VCC18 = 0V
ISINK = 100µA, VCC3 = 0V, VCC18 = 1V
ISINK = 100µA, VCC3 = 1V, VCC18 = 1V
l
l
l
l
VOH
Output Voltage High, RST
ISOURCE = 1µA (Note 6)
l
Note 1: Stresses beyond those listed under Absolute Maximum Ratings
may cause permanent damage to the device. Exposure to any Absolute
Maximum Rating condition for extended periods may affect device
reliability and lifetime.
Note 2: All voltage values are with respect to GND.
Note 3: The LTC1727E/LTC1728E are guaranteed to meet specified
performance from 0°C to 70°C and are designed, characterized and
assured to meet the extended temperature limits of –40°C to 85°C
but are not tested at these temperatures.
110
0.15
0.05
0.05
0.05
VCC3 – 1
µs
0.4
0.3
0.3
0.3
V
V
V
V
V
Note 4: Both VCC3 and VCC5/VCC25/VCC18 can act as the supply depending
on which pin has the greatest potential.
Note 5: Measured from when input passes through the input threshold
(VRTX) until RST or COMPX passes through 1.5V.
Note 6: The output pins RST and COMPX have internal pull-ups to VCC3 of
typically 6µA. However, external pull-up resistors may be used when faster
rise times are required or for VOH voltages greater than VCC3.
Note 7: The VCC5 reset override voltage is valid for an operating range less
than approximately 4.15V. Above this point the override is turned off and
the VCC5 pin functions normally.
17278fb
4
LTC1727/LTC1728
Typical Performance Characteristics
VCCA Input Current
vs Input Voltage
450
0.5
0
–0.5
–1.0
–1.5
–2.0
0.80 0.85 0.90 0.95 1 1.05 1.10 1.15 1.20
INPUT VOLTAGE (V)
TYPICAL TRANSIENT DIRATION (µs)
1.0
1.010
1.005
1.000
0.995
0.990
0.985
20 40 60
–60 –40 –20 0
TEMPERATURE (°C)
Reset Pulse Width
vs Temperature
10
9
260
180
40
60
80
100
IVCC25 (µA)
1.1
1.0
0.9
0.8
0.7
1
0.6
0
0.5
–60 –40 –20 0 20 40 60
TEMPERATURE (°C)
0
1
3
4
2
VCC3 OR VCC5 (V)
5
6
IVCC3 vs Temperature
(LTC1727-5/LTC1728-5)
1.5
VCC3 = 3.3V
VCC25 = 2.5V
VCCA = 3.3V
1.4
1.3
15
VCC5 = 5V
VCC3 = 3.3V
VCCA = 3.3V
14
13
12
11
1.1
11
IVCC3 (µA)
1.2
9
1.0
0.9
VCC5 = 5V
VCC3 = 3.3V
VCCA = 3.3V
10
9
8
0.8
8
7
0.7
7
6
0.6
6
0.5
–60 –40 –20 0 20 40 60
TEMPERATURE (°C)
5
–60 –40 –20 0 20 40 60
TEMPERATURE (°C)
5
–60 –40 –20 0 20 40 60
TEMPERATURE (°C)
80
100
1727/28 G07
100
IVCC5 vs Temperature
(LTC1727-5/LTC1728-5)
12
10
80
1727/28 G06
1727/28 G05
IVCC3 vs Temperature (LTC17272.5/LTC1728-2.5/LTC1728-3.3)
IVCC3 (µA)
1.3
VCC3 = 3.3V
VCC25 = 2.5V
VCCA = 3.3V
1.2
VOL = 0.2V
1727/28 G04
13
50
1.4
5
4
TEMPERATURE (°C)
14
100
1.5
2
160
20
150
IVCC25 vs Temperature
(LTC1727-2.5/LT1728-2.5)
6
3
0
250
200
1727/28 G03
VOL = 0.4V
7
200
RESET OCCURS
ABOVE CURVE
300
0
0.1
1
10
100
RESET COMPARATOR OVERDRIVE VOLTAGE (% OF VCC)
100
TA = 25°C
8
240
ISINK (mA)
RESET PULSE WIDTH, tRST (ms)
280
140
–60 –40 –20
350
RST, COMPX ISINK
vs Supply Voltage
220
TA = 25°C
400
1727/28 G02
1727/28 G01
15
80
IVCC5 (µA)
INPUT CURRENT (nA)
1.5
Typical Transient Duration
vs Comparator Overdrive
1.015
TA = 25°C
VCCA THRESHOLD VOLTAGE, VRTA (V)
2.0
VCCA Threshold Voltage
vs Temperature
80
100
1727/28 G08
80
100
1727/28 G09
17278fb
5
LTC1727/LTC1728
Typical Performance Characteristics
VCC3 Threshold Voltage
vs Temperature
(All But LTC1728-1.8)
3.135
2.3675
3.125
2.3600
2.3525
2.3450
2.3375
2.3300
2.3225
2.3150
2.3075
2.3000
–60 –40 –20 0 20 40 60
TEMPERATURE (°C)
80
100
4.750
4.725
3.115
3.105
4.700
3.095
3.085
4.675
3.075
4.650
3.065
3.055
4.625
3.045
3.035
–60 –40 –20 0 20 40 60
TEMPERATURE (°C)
1727/28 G10
1.4
100
4.600
20
40 60
–60 –40 –20 0
TEMPERATURE (°C)
VCC3 = 3V
14 VCC18 = 1.8V
VCCA = 3V
13
1.2
12
1.1
11
1.0
0.9
10
9
0.8
8
0.7
7
0.6
6
0.5
–60 –40 –20 0 20 40 60
TEMPERATURE (°C)
5
–60 –40 –20 0 20 40 60
TEMPERATURE (°C)
80
100
80
100
1727/28 G14
1727/28 G13
VCC18 Threshold Voltage
vs Temperature
(LTC1728-1.8/LTC1728-3.3)
VCC3 Threshold Voltage
vs Temperature (LTC1728-1.8)
2.845
VCC3 THRESHOLD VOLTAGE, VRT3 (V)
1.710
VCC18 THRESHOLD VOLTAGE, VRT18 (V)
1727/28 G12
15
VCC3 = 3V
VCC18 = 1.8V
VCCA = 3V
1.700
1.690
1.680
1.670
1.660
1.650
20 40 60
–60 –40 –20 0
TEMPERATURE (°C)
80 100
IVCC3 vs Temperature
(LTC1728-1.8)
IVCC3 (µA)
IVCC18 (µA)
1.3
80
1727/28 G11
IVCC18 vs Temperature
(LTC1728-1.8/LTC1728-3.3)
1.5
VCC5 Threshold Voltage
vs Temperature
(LTC1727-5/LTC1728-5)
VCC5 THESHOLD VOLTAGE, VRT5 (V)
2.3750
VCC3 THRESHOLD VOLTAGE, VRT3 (V)
VCC25 THRESHOLD VOLTAGE, VRT25 (V)
VCC25 Threshold Voltage
vs Temperature
(LTC1727-2.5/LTC1728-2.5)
80
100
1727/28 G15
2.835
2.825
2.815
2.805
2.795
2.785
2.775
2.765
–60 –40 –20 0 20 40 60
TEMPERATURE (°C)
80
100
1727/28 G16
17278fb
6
LTC1727/LTC1728
Pin Functions
(LTC1727/LTC1728)
VCC3 (Pin 1/Pin 5): 3.3V Sense Input and Power Supply
Pin. (3V Sense Input and Power Supply Pin for LTC17281.8.) This pin provides power to the part when the voltage
on VCC3 is greater than the voltage on VCC5/VCC25/VCC18.
Bypass to ground with a ≥ 0.1µF ceramic capacitor.
VCC5 (Pin 2/Pin 4): 5V Sense Input and Power Supply Pin.
This pin is used on the LTC1727-5/LTC1728-5 to provide
power to the part when the voltage on VCC5 is greater
than the voltage on VCC3. Bypass to ground with a ≥0.1µF
ceramic capacitor.
VCC25 (Pin 2/Pin 4): 2.5V Sense Input and Power Supply
Pin. This pin is used on the LTC1727-2.5/LTC1728-2.5 to
provide power to the part when the voltage on VCC25 is
greater than the voltage on VCC3. Bypass to ground with
a ≥0.1µF ceramic capacitor.
VCC18 (Pin 2/Pin 4): 1.8V Sense Input and Power Supply
Pin. This pin is used on the LTC1728-1.8/LTC1728‑3.3 to
provide power to the part when the voltage on VCC18 is
greater than the voltage on VCC3. Bypass to ground with
a ≥0.1µF ceramic capacitor.
VCCA (Pin 3/Pin 3): 1V Sense, High Impedance Input. If unused, it can be tied to either VCC3 or VCC5 /VCC25/VCC18.
GND (Pin 4/Pin 2): Ground.
COMPA (Pin 5): VCCA Comparator Output for the LTC1727.
Active high, open-drain logic output with weak pull-up to
VCC3. Asserted when VCCA is above VRTA. Deasserted when
VCCA is below VRTA or if both the VCC3 and VCC5 supply
pins are too low to power the internal bandgap reference
(typically < 2.0V). Can be pulled greater than VCC3 using
an external pull-up.
RST (Pin 6/Pin 1): Reset Logic Output. Active low, opendrain logic output with weak pull-up to VCC3. Can be pulled
up greater than VCC3 when interfacing to 5V logic. Asserted
when one or all of the supplies are below trip thresholds
and held for 200ms after all supplies become valid.
COMP5 (Pin 7): VCC5 Comparator Output for the
LTC1727-5. Active high, open-drain logic output with weak
pull-up to VCC3. Asserted when VCC5 is above VRT5. Can
be pulled greater than VCC3 using an external pull-up.
COMP25 (Pin 7): VCC25 Comparator Output for the
LTC1727-2.5. Active high, open-drain logic output with
weak pull-up to VCC3. Asserted when VCC25 is above
VRT25. Can be pulled greater than VCC3 using an external
pull-up.
COMP3 (Pin 8): VCC3 Comparator Output for the LTC1727.
Active high, open-drain logic output with weak pull-up to
VCC3. Asserted when VCC3 is above VRT3. Can be pulled
greater than VCC3 using an external pull-up.
17278fb
7
LTC1727/LTC1728
Block DiagramS
LTC1727-5/LTC1727-2.5
VCC3
6µA
–
VCC3 1
8
COMP3
7
COMP25/
COMP5
6
RST
5
COMPA
+
VCC3
POWER
DETECT
6µA
VCC INTERNAL
VCC5/
2
VCC25
–
VCC3
+
6µA
VCCA 3
GND 4
–
+
200ms PULSE GENERATOR
200ms
DELAY
VCC3
6µA
BANDGAP
REFERENCE
1727 BD1
17278fb
8
LTC1727/LTC1728
Block DiagramS
LTC1728-5/LTC1728-2.5/LTC1728-1.8/LTC1728-3.3
–
VCC3 5
+
POWER
DETECT
VCC INTERNAL
VCC3
VCC5/
VCC25/ 4
VCC18
6µA
–
200ms PULSE GENERATOR
1
RST
200ms
DELAY
+
–
VCCA 3
+
GND 2
BANDGAP
REFERENCE
1727 BD2
TIMING Diagram
VCC Monitor Timing
VCCX
VRTX
tUV
RST
tRST
1.5V
COMPX
1727 TD01
17278fb
9
LTC1727/LTC1728
applications information
Supply Monitoring
Power-Down
The LTC1727 is a low power, high accuracy triple supply monitoring circuit with three monitor outputs and a
200ms microprocessor reset output.
On power-down, once any of the VCC inputs drop below
its threshold, RST is held at a logic low. A logic low of
0.3V is guaranteed until both VCC3 and VCC5/VCC25/VCC18
drop below 1V.
All three VCC inputs must be above predetermined thresholds for reset not to be invoked. The LTC1727/LTC1728 will
assert reset during power-up, power-down and brownout
conditions on any one or all of the VCC inputs.
Power Detect
The LTC1727/LTC1728 are powered from the 3.3V/3V input
pin (VCC3), the 1.8V input pin (VCC18), the 2.5V input pin
(VCC25) or the 5V input pin (VCC5), whichever pin has the
highest potential. This ensures the part pulls the RST pin
low as soon as either input pin is ≥ 1V.
Power-Up
Upon power-up, either the VCC5 /VCC25/VCC18 or VCC3 pin,
can power the part. This ensures that RST will be low
when either VCC5/VCC25/VCC18 or VCC3 reaches 1V. As long
as any one of the VCC inputs is below its predetermined
threshold, RST will stay a logic low. Once all of the VCC
inputs rise above their thresholds, an internal timer is
started and RST is released after 200ms.
RST is reasserted whenever any one of the VCC inputs
drops below its predetermined threshold and remains
asserted until 200ms after all of the VCC inputs are above
their thresholds.
On the LTC1727, each of the comparator outputs will be
low until the VCC input that is monitored by that comparator rises above the appropriate predetermined threshold.
The COMP3, and COMP5/COMP25 outputs are guaranteed to be in the correct logic state for either VCC3 or
VCC5/VCC25 greater than 1V. The COMPA output requires
the internal bandgap reference to be valid before the
correct logic state can be output. Therefore, the COMPA
output will be held low until VCCA is above 1V and VCC3
or VCC5/VCC25 is greater than 2V (typ).
Glitch Immunity
The RST output of the LTC1727/LTC1728 have two forms
of glitch immunity built in. First, the input monitors require
the input voltage to transition at least 10% of the input
threshold (0.1 • VRTH) below the input threshold for approximately 50µs in order to force the monitor output low.
The duration of the transition must be longer for voltage
transitions of lesser magnitude (see Figure 1). Secondly,
the reset pulse width of approximately 200ms acts to
debounce the RST output ensuring that the RST output
will always be in the correct state.
The individual monitor outputs of the LTC1727 do not have
hysteresis and will track the monitor inputs relative to the
monitor’s input threshold (VRTA, VRT25, VRT3 and VRT5). A
very slow moving input voltage with ripple riding on it may
cause the individual monitor outputs (COMPA, COMP25,
COMP3 and COMP5) to toggle on the ripple as the input
voltage passes the input threshold. The slow response
time of the LTC1727’s input monitors has a tendency to
integrate signals on the inputs improving their immunity
to noise and ripple.
450
400
TRANSIENT DURATION (µs)
The LTC1728 is a low power, high accuracy triple supply
monitoring circuit with a single 200ms microprocessor
reset output.
350
300
250
200
150
100
50
0
0.1
1
10
100
RESET MONITOR OVERDRIVE VOLTAGE (% OF VCC)
1727/28 F01
Figure 1. Transient Duration vs Comparator Overdrive
17278fb
10
LTC1727/LTC1728
Applications Information
Override Functions (5V Versions Only)
When monitoring either 3.3V or 5V with VCC3 strapped
to VCC5 (see Figure 2), the part determines which is the
appropriate range. The part handles this situation as
shown in Figure 3. Above 1V and below VRT3, RST is held
low. From VRT3 to approximately 4.15V the part assumes
3.3V supply monitoring and RST is deasserted. Above
approximately 4.15V the part operates as a 5V monitor.
In most systems the 5V supply will pass through the
3.1V to 4.15V region in <200ms during power-up, and
the RST output will behave as desired. Table 1 summarizes the state of RST at various operating voltages with
VCC3 = VCC5.
The VCCA pin, if unused, can be tied to either VCC3 or
VCC5. This is an obvious solution since the trip points for
VCC3 and VCC5 will always be greater than the trip point
for VCCA.
The VCC5 input trip point is disabled if its voltage is
equal to the voltage on VCC3 ± 25mV and the voltage on
VCC5 is less than 4.15V. In this manner, the LTC1727-5/
LTC1728-5 will behave as a 3.3V monitor and VCC5 reset
capability will be disabled.
The VCC5 trip point is reenabled when the voltage on
VCC5 is equal to the voltage on VCC3 ± 25mV and the
two inputs are greater than approximately 4.15V. In this
manner, the part can function as a 5V monitor with the
3.3V monitor disabled.
VCC
3.3V OR 5V
5
4
3
2
Table 1. Override Truth Table (VCC3 = VCC5)
INPUTS (VCC3 = VCC5 = VCC)
0V ≤ VCC ≤ 1V
—
1V ≤ VCC ≤ VRT3
0
VRT3 ≤ VCC ≤ 4.15V
1
4.15V ≤ VCC ≤ VRT5
0
VRT5 ≤ VCC
1
LTC1728-5
R1
10k
VCC3
VCC5
VCCA
RST
RST
1
TO SYSTEM
RESET
GND
1727/28 F02
Figure 2. Single Supply Monitor with Others Disabled
RST OUTPUT VOLTAGE (V)
5
VCC3 = VCC5 = VCCA = 0V TO 5V
10k PULL-UP FROM RST TO VCC3
4
3
2
1
0
0
1
3
4
2
SUPPLY VOLTAGE (V)
5
1727/28 F03
Figure 3. RST Voltage vs Supply Voltage
17278fb
11
LTC1727/LTC1728
applications information
LTC1727-2.5/LTC1728-2.5/LTC1728-1.8/LTC1728-3.3
Override Functions
Figure 4 contains a simple circuit for 5V systems that can’t
risk the RST output going high in the 3.1V to 4.15V range
(possibly due to very slow rise time on the 5V supply).
Diode D1 powers the LTC1728-5 while dropping ≈ 0.6V
from the VCC5 pin to the VCC3 pin. This prevents the part’s
internal override circuit from being activated. Without the
override circuit active, the RST pin stays low until VCC5
reaches VRT5 ≅ 4.675V. (See Figure 5.)
The VCCA pin, if unused, can be tied to either VCC3 or VCC25/
VCC18. This is an obvious solution since the trip points for
VCC3 and VCC25/VCC18 will always be greater than the trip
point for VCCA. Likewise, the VCC25/VCC18, if unused, can
be tied to VCC3. VCC3 must always be used. Tying VCC3 to
VCC25/VCC18 and operating off of a 2.5V/1.8V supply will
result in the continuous assertion of RST.
5V
5
4
3
0.1µF
2
LTC1728-5
VCC5
VCCA
RST
5
R1
10k
VCC3
1
TO SYSTEM
RESET
GND
D1: MMBD914 OR EQUIVALENT
RST OUTPUT VOLTAGE (V)
D1
1727/28 F04
Figure 4. LTC1728-5 Monitoring a Single 5V
Supply. D1 Used to Avoid RST High Near 3.1V
to 4V (See Figure 3).
VCC5 = VCCA = 0V TO 5V
10k PULL-UP FROM RST TO VCC5
TA = 25°C
4
3
2
1
0
0
0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
VCC5 (V)
1727/28 F05
Figure 5. RST Output Voltage
Characteristics of the Circuit in Figure 4
typical applications
Triple Supply Monitor (3.3V, 5V and Adjustable)
LTC1728-5
3.3V
ADJUSTABLE SUPPLY
OR DC/DC FEEDBACK
DIVIDER
R1*
5V
R2*
5
4
3
2
VCC3
RST
1
SYSTEM RESET
VCC5
VCCA
GND
1727/28 TA03
*TO PRESERVE THRESHOLD ACCURACY, SET PARALLEL
COMBINATION OF R1 AND R2 ≤ 66.5k
17278fb
12
LTC1727/LTC1728
typical Applications
Dual Supply Monitor (3.3V and 5V, Defeat VCCA Input)
LTC1728-5
5
3.3V
4
5V
3
2
RST
VCC3
1
SYSTEM RESET
VCC5
VCCA
GND
1727/28 TA04
Dual Supply Monitor (3.3V or 5V Plus Adjustable)
3.3V OR
5V
LTC1728-5
5
4
R1*
ADJUSTABLE
SUPPLY
3
R2*
2
RST
VCC3
10k
1
SYSTEM RESET
VCC5
VCCA
GND
1727/28 TA05
*TO PRESERVE THRESHOLD ACCURACY, SET PARALLEL
COMBINATION OF R1 AND R2 ≤ 66.5k
REFER TO LTC1728-5 OVERRIDE FUNCTIONS IN
THE APPLICATIONS INFORMATION SECTION
Dual Supply Monitor (3.3V Plus Adjustable)
3.3V
LTC1728-2.5
5
4
R1*
ADJUSTABLE
SUPPLY
3
R2*
2
RST
VCC3
10k
1
SYSTEM RESET
VCC25
VCCA
GND
1727/28 TA06
*TO PRESERVE THRESHOLD ACCURACY, SET PARALLEL
COMBINATION OF R1 AND R2 ≤ 66.5k
Using VCCA Tied to DC/DC Feedback Divider
2.9V
LTC1435
VOSENSE
ADJUSTABLE
RESET TRIP
THRESHOLD 2.74V
6
35.7k
1%
3.3V
2.8k
5V
1%
22.1k
1%
LTC1728-5
5
4
3
2
VCC3
RST
1
SYSTEM RESET
VCC5
VCCA
GND
1727/28 TA07
17278fb
13
LTC1727/LTC1728
Package Description
MS8 Package
8-Lead Plastic MSOP
(Reference LTC DWG # 05-08-1660)
3.00 ± 0.102
(.118 ± .004)
(NOTE 3)
0.889 ± 0.127
(.035 ± .005)
7 6 5
0.52
(.0205)
REF
3.00 ± 0.102
(.118 ± .004)
(NOTE 4)
4.90 ± 0.152
(.193 ± .006)
DETAIL “A”
0.254
(.010)
8
0° – 6° TYP
GAUGE PLANE
5.23
(.206)
MIN
3.20 – 3.45
(.126 – .136)
1
0.53 ± 0.152
(.021 ± .006)
DETAIL “A”
4
0.86
(.034)
REF
0.18
(.007)
0.65
(.0256)
BSC
0.42 ± 0.038
(.0165 ± .0015)
TYP
2 3
1.10
(.043)
MAX
SEATING
PLANE
RECOMMENDED SOLDER PAD LAYOUT
0.22 – 0.38
(.009 – .015)
TYP
0.65
(.0256)
BSC
0.127 ± 0.076
(.005 ± .003)
MSOP (MS8) 0204
NOTE:
1. DIMENSIONS IN MILLIMETER/(INCH)
2. DRAWING NOT TO SCALE
3. DIMENSION DOES NOT INCLUDE MOLD FLASH, PROTRUSIONS OR GATE BURRS.
MOLD FLASH, PROTRUSIONS OR GATE BURRS SHALL NOT EXCEED 0.152mm (.006") PER SIDE
4. DIMENSION DOES NOT INCLUDE INTERLEAD FLASH OR PROTRUSIONS.
INTERLEAD FLASH OR PROTRUSIONS SHALL NOT EXCEED 0.152mm (.006") PER SIDE
5. LEAD COPLANARITY (BOTTOM OF LEADS AFTER FORMING) SHALL BE 0.102mm (.004") MAX
S8 Package
8-Lead Plastic Small Outline (Narrow 0.150)
(Reference LTC DWG # 05-08-1610)
.050 BSC
.189 – .197
(4.801 – 5.004)
NOTE 3
.045 ±.005
8
.245
MIN
.160 ±.005
.010 – .020
× 45°
(0.254 – 0.508)
NOTE:
1. DIMENSIONS IN
5
.150 – .157
(3.810 – 3.988)
NOTE 3
1
RECOMMENDED SOLDER PAD LAYOUT
.053 – .069
(1.346 – 1.752)
0°– 8° TYP
.016 – .050
(0.406 – 1.270)
6
.228 – .244
(5.791 – 6.197)
.030 ±.005
TYP
.008 – .010
(0.203 – 0.254)
7
.014 – .019
(0.355 – 0.483)
TYP
INCHES
(MILLIMETERS)
2. DRAWING NOT TO SCALE
3. THESE DIMENSIONS DO NOT INCLUDE MOLD FLASH OR PROTRUSIONS.
MOLD FLASH OR PROTRUSIONS SHALL NOT EXCEED .006" (0.15mm)
2
3
4
.004 – .010
(0.101 – 0.254)
.050
(1.270)
BSC
SO8 0303
17278fb
14
LTC1727/LTC1728
Package Description
S5 Package
5-Lead Plastic SOT-23
(Reference LTC DWG # 05-08-1633)
(Reference LTC DWG # 05-08-1635)
2.80 – 3.10
(.110 – .118)
(NOTE 3)
A
SOT-23
(Original)
.90 – 1.45
(.035 – .057)
SOT-23
(ThinSOT)
1.00 MAX
(.039 MAX)
A1
.00 – .15
(.00 – .006)
.01 – .10
(.0004 – .004)
A2
.90 – 1.30
(.035 – .051)
.80 – .90
(.031 – .035)
L
.35 – .55
(.014 – .021)
.30 – .50 REF
(.012 – .019 REF)
2.60 – 3.00
(.102 – .118)
1.50 – 1.75
(.059 – .069)
(NOTE 3)
PIN ONE
.95
(.037)
REF
.20
(.008)
A
DATUM ‘A’
L
NOTE:
1. CONTROLLING DIMENSION: MILLIMETERS
MILLIMETERS
2. DIMENSIONS ARE IN
(INCHES)
.09 – .20
(.004 – .008)
(NOTE 2)
.25 – .50
(.010 – .020)
(5PLCS, NOTE 2)
A2
1.90
(.074)
REF
A1
S5 SOT-23 0401
3. DRAWING NOT TO SCALE
4. DIMENSIONS ARE INCLUSIVE OF PLATING
5. DIMENSIONS ARE EXCLUSIVE OF MOLD FLASH AND METAL BURR
6. MOLD FLASH SHALL NOT EXCEED .254mm
7. PACKAGE EIAJ REFERENCE IS:
SC-74A (EIAJ) FOR ORIGINAL
JEDEC MO-193 FOR THIN
17278fb
Information furnished by Linear Technology Corporation is believed to be accurate and reliable.
However, no responsibility is assumed for its use. Linear Technology Corporation makes no representation that the interconnection of its circuits as described herein will not infringe on existing patent rights.
15
LTC1727/LTC1728
Typical Application
Triple Supply Monitor with Manual Reset Button
12V (±5%)
VTRIP = 11.2V
(±0.17V)
5V
3.3V
5
100nF
R3*
10k
5%
R1
1.07M
0.1%
MANUAL
RESET BUTTON
(NORMALLY OPEN)
100nF
*OPTIONAL RESISTOR RECOMMENDED
TO EXTEND ESD TOLERANCE
RST
1
LTC1728-5
4
R2
105k
0.1%
VCC3
3
VCC5
VCCA
GND
2
1727/28 TA02
V
VTRIP = CCA (R1 + R2)
R2
V
R1 = R2 TRIP – 1
VCCA
(
)
Related Parts
PART NUMBER
DESCRIPTION
COMMENTS
LTC690
5V Supply Monitor, Watchdog Timer and Battery Backup
4.65V Threshold
LTC694-3.3
3.3V Supply Monitor, Watchdog Timer and Battery Backup
2.9V Threshold
LTC699
5V Supply Monitor and Watchdog Timer
4.65V Threshold
LTC1232
5V Supply Monitor, Watchdog Timer and Push-Button Reset
4.37V/4.62V Threshold
LTC1326
Micropower Precision Triple Supply Monitor for 5V, 3.3V and ADJ
4.725V, 3.118V, 1V Thresholds (± 0.75%)
LTC1326-2.5
Micropower Precision Triple Supply Monitor for 2.5V, 3.3V and ADJ
2.363V, 3.118V, 1V Thresholds (±0.75%)
LTC1443/LTC1444
LTC1445
Micropower Quad Comparators with 1% Reference
LTC1443 Has 1.182V Reference, LTC1444/LTC1445
Have 1.221V Reference and Adjustable Hysteresis
LTC1536
Precision Triple Supply Monitor for PCI Applications
Meets PCI tFAIL Timing Specifications
LTC1540
Nanopower Comparator with 2% Reference
1.182V Reference, 300nA Supply Current, 8-Pin MSOP
LTC1726-2.5
Micropower Triple Supply Monitor for 2.5V, 3.3V and ADJ
Adjustable RESET and Watchdog Time Outs
LTC1726-5
Micropower Triple Supply Monitor for 5V, 3.3V and ADJ
Adjustable RESET and Watchdog Time Outs
LTC1985-1.8
Micropower Triple Supply Monitor for 3.3V, 1.8V and ADJ
Push-Pull RESET Output, SOT-23
17278fb
16 Linear Technology Corporation
LT 0207 REV B • PRINTED IN USA
1630 McCarthy Blvd., Milpitas, CA 95035-7417
(408) 432-1900 ● FAX: (408) 434-0507
●
www.linear.com
 LINEAR TECHNOLOGY CORPORATION 1999