Ordering number : ENA0853 Bi-CMOS LSI 2-channel Step-down Switching Regulator LV5743V Overview The LV5743V is a 2-channel step-down switching regulator. Features • Provides dual switching regulator control circuits integrated on the chip. • Output-stage push-pull structure enabling high efficient operation. • Provides power supply (VCC-5V) for protecting the external P channel MOS gate. • Built-in timer latch type SCP (short-circuit protection circuit) • Built-in UVLO (Low voltage malfunction prevention circuit) • Built-in reference voltage circuit • Max_On_Duty is adjustable. Specifications Absolute Maximum Ratings at Ta = 25°C Parameter Maximum supply voltage Symbol Conditions Ratings Unit VCC max 35 V Output voltage VO max 33 V Allowable power dissipation Pd max 0.74 W Mounted on a specified board * Operating temperature Topr -20 to +85 °C Storage temperature Tstg -55 to +150 °C 7 V Allowable pin voltage 1 CT, NON1, NON2, INV1, INV2, FB1, FB2, DT1, DT2, SCP, VREF 2 VCC-5V 30 V 3 GND, OUT1, OUT2, 35 V VCC * : Specified board : 114.3×76.1×1.6mm3, glass epoxy board Any and all SANYO Semiconductor products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO Semiconductor representative nearest you before using any SANYO Semiconductor products described or contained herein in such applications. SANYO Semiconductor assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor products described or contained herein. 80107 MS PC 20070601-S00001 No.A0853-1/6 LV5743V Allowable Operating Ratings at Ta = 25°C Parameter Symbol Conditions Ratings Unit Supply voltage VCC 8 to 33 Error amplifier input voltage VIN 0 to 3.3 V V Timing capacitance CCT 50 to 5000 pF Oscillation frequency FCT 20k to 1M Hz Electrical Characteristics at Ta = 25°C, VCC = 12V Parameter Symbol Ratings Conditions Unit min typ max 2.4948 2.520 2.5452 1 10 mV mV Reference voltage block Output voltage Vref Iref = 1mA Input stability VDLI VCC = 8 to 33V Load stability VDLO Iref = 0 to 5mA VIN-5V supply voltage VN5 1 10 IOUT = -5mA VCC-5.5 VCC-5.0 VCC-4.5 CCT = 220pF 320 400 480 V V Triangular wave oscillator block Oscillation frequency FOSC Frequency fluctuation FDV VCC = 8 to 33V 1 kHz % Protection circuit block Threshold voltage Standby voltage VIT 1.5 VSTB 1.7 1.9 V 50 100 mV Latch voltage VLT 30 100 mV Source current ISCP 1.6 2.1 2.6 μA Comparator threshold voltage VCT 1.4 1.5 1.6 V Duty cycle = 0% 0.45 0.5 0.55 V 0.95 1.0 1.05 V 0.1 1 μA 7 7.5 V Quiescent time adjustment circuit block Input threshold voltage Vt0 (fosc = 20kHz) Vt100 Duty cycle = 100% Input bias current IBDT DT1, DT2 = 0V Low voltage malfunction prevention circuit block Threshold voltage VUT 6.5 Error amplifier Input offset voltage VIO Input offset current IIO Input bias current IIB 15 Open gain AV 85 Common mode input voltage range Common mode rejection ratio VOM 6 VCC = 8 to 33V 0 CMRR 30 nA 100 nA dB 3.3 80 Maximum output voltage VOH 2.6 Minimum output voltage VOL 0.2 mV V dB V 0.4 V Output sink current IOI FB = 1.25V 1 mA Output source current IOO FB = 1.25V 85 μA Vt0 Duty cycle = 0% 0.45 0.5 0.55 V Duty cycle = 100% 0.95 1.0 1.05 V PWM comparator Input threshold voltage (fosc = 20kHz) Vt100 Output block Output stage on resistance (upper) RONH 7 Ω Output stage on resistance (lower) RONL 2 Ω Overall device characteristics Standby current ICCS When output is off 5 mA No.A0853-2/8 LV5743V Package Dimensions unit : mm (typ) 3178B Pd max -- Ta Allowable power dissipation, Pd max – W 0.9 5.2 0.5 6.4 9 4.4 16 1 8 0.65 0.22 0.8 0.74 0.7 0.6 0.5 0.4 0.38 0.3 0.2 0.1 0 – 20 1.5max (0.33) 0.15 Specified board : 114.3×76.1×1.6mm3 glass epoxy 0 20 40 60 80 85 100 0.1 (1.3) Ambient temperature, Ta – °C SANYO : SSOP16(225mil) Pin Assignment 1 16 VREF GND 2 15 SCP NON1 3 14 NON2 INV1 4 13 INV2 FB1 5 12 FB2 DT1 6 11 DT2 OUT1 7 10 OUT2 VCC-5V 8 9 VCC LV5743 CT Top view No.A0853-3/8 LV5743V Pin Function Pin No. Pin Name 1 CT Description External timing capacitor connection pin 2 GND 3 NON1 Ground Error amplifier 1 input (+) 4 INV1 Error amplifier 1 input (-) 5 FB1 Error amplifier 1 output 6 DT1 7 OUT1 8 VCC-5V 9 VCC Power supply 10 OUT2 Output 2 11 DT2 Output 1 maximum duty setting Output 1 Power supply for output stage drive Output 2 maximum duty setting 12 FB2 Error amplifier 2 input (+) 13 INV2 Error amplifier 2 input (-) 14 NON2 Error amplifier 2 output 15 SCP 16 VREF Timer latch setting Reference voltage output Block Diagram Vref NON1 INV1 Vref + - FB1 NON2 INV2 FB2 + - VCC CT REFERENCE VOLTAGE TRIANGLE OSCILLATOR Err Amp1 + + - + + SCP Comp + + Err Amp2 OUT1 PWM Comp1 OUT2 PWM Comp2 Vref SCP S R TIMER LATCH R UVLO REGULATOR DT1 DT2 GND VCC-5V No.A0853-4/8 LV5743V Timing Chart VCC UVLO release voltage VREG NON VOUT UVLO signal ESD NON 1kΩ VREF R1 R2 C1 * The voltage at the NON pin is {VREF/(R1+1k)} × 1k in UVLO mode. No.A0853-5/8 LV5743V Sample Application Circuit Diagram C21 C19 Q2 C13 R17 C17 D1 C16 L1 C5 R8 C4 R7 C18 D2 VCC 9 8 VCC-5V C11 C12 OUT2 10 6 DT1 PGND R6 5 FB1 R5 C3 4 INV1 3 NON1 C2 R4 R2 R1 R3 2 GND 1 CT C1 C14 R16 R22 LV5743 R20 Q2 L2 7 OUT1 R14 DT2 11 C9 R18 C15 C10 R15 R13 C8 R9 INV2 13 NON2 14 VCC FB2 12 C7 R12 R11 C6 SCP 15 VREF 16 F1 R21 R10 R22 R19 SGND C20 Specifications of any and all SANYO Semiconductor products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Semiconductor Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor products (including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Semiconductor Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. SANYO Semiconductor believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of August, 2007. Specifications and information herein are subject to change without notice. PS No.A0853-6/6