UltraMAX TM LX5115A U LT R A 9 - C H A N N E L S C S I T E R M I N AT O R T H E I N F I N I T E P O W E R O F I P N N O VA T I O N R O D U C T I O N DESCRIPTION The LX5115A SCSI terminator is part of Linfinity's UltraMAX family of high-performance, adaptive, non-linear mode SCSI products, which are designed to deliver true UltraSCSI performance in SCSI applications. The low voltage BiCMOS architecture employed in its design offers superior performance to older linear passive and active techniques. Linfinity's UltraMAX architecture employs high-speed adaptive elements for each channel, thereby providing the fastest response possible — typically 35MHz, which is 100 times faster than the older linear regulator/terminator approach used by other manufacturers. Products using this older linear regulator approach have bandwidths which are dominated by the output capacitor and which are limited to 500KHz (see further discussion in the Functional Description section). The UltraMAX architecture also eliminates the output compensation capacitor typical in earlier terminator designs. Each is approved for use with SCSI-1, -2, -3, UltraSCSI and beyond — providing the highest performance alternative available today. Another key improvement offered by the LX5115A lies in its ability to insure reliable, errorfree communications even in systems which do not adhere to recommended SCSI hardware design guidelines, such as the use of improper cable D A T A S H E E T K E Y F E AT U R E S lengths and impedances. Frequently, this situation is not controlled by the peripheral or host designer and, when problems occur, they are the first to be made aware of the problem. The LX5115A architecture is much more tolerant of marginal system integrations. Recognizing the needs of portable and configurable peripherals, the LX5115A has a TTL compatible sleep/disable mode. Quiescent current is typically 200µA in this mode, while the output capacitance is also less than 3pF. The obvious advantage of extended battery life for portable systems is inherent in the product's sleepmode feature. Additionally, the disable function permits factory-floor or production-line configurability, reducing inventory and productline diversity costs. Field configurability can also be accomplished without physically removing components which, often times results in field returns due to mishandling. Reduced component counts is also inherent in the LX5115A architecture. Traditional termination techniques require large stabilization and transient protection capacitors of up to 20µF in value and size. The LX5115A architecture does not require these components, allowing all the cost savings associated with inventory, board space, assembly, reliability, and component costs. ■ Ultra-Fast Response For Fast-20 SCSI Applications ■ 35MHz Channel Bandwidth ■ Less Than 3pF Output Capacitance ■ Sleep-Mode Current Of 200µA ■ NO External Compensation Capacitors ■ Implements 8-Bit Or 16-Bit (Wide) Applications ■ Compatible With Active Negation Drivers ■ Compatible With Passive And Active Terminations ■ Approved For Use With SCSI 1, 2, 3 And Ultra SCSI ■ Hot Swap Compatible ■ Pin-For-Pin Compatible With DS21S07A / 2105 NOTE: For current data & package dimensions, visit our web site: http://www.linfinity.com. PRODUCT HIGHLIGHT R E C E I V I N G W AV E F O R M - 20MH Z D R I V I N G W AV E F O R M - 20MH Z Receiver Driver NOTE: 1 Meter, AWG 28 LX5115A LX5115A LX5268 LX5268 For An In-Depth Discussion On Applying SCSI, Request Linfinity Application Note: "Understanding The SingleEnded SCSI Bus" PA C K A G E O R D E R I N F O R M AT I O N TJ (°C) 0 to 70 SOIC D Plastic 16-pin LX5115ACD SOWB DW Plastic 16-pin LX5115ACDW TSSOP PWP Plastic 20-pin, Power LX5115ACPWP Note: All surface-mount packages are available in Tape & Reel. Append the letter "T" to part number. (i.e. LX5115ACDWT) Copyright © 2000 Rev. 1.0 4/00 LINFINITY MICROELECTRONICS INC. 11861 WESTERN AVENUE, GARDEN GROVE, CA. 92841, 714-898-8121, FAX: 714-893-2570 1 PRODUCT DATABOOK 1996/1997 UltraMAX LX5115A U LT R A 9 - C H A N N E L S C S I T E R M I N AT O R P R O D U C T I O N A B S O L U T E M A X I M U M R AT I N G S D A T A S H E E T (Note 1) Continuous Termination Voltage .......................................................................... 10V Continuous Output Voltage Range .............................................................. 0 to 5.5V Continuous Disable Voltage Range .............................................................. 0 to 5.5V Operating Junction Temperature ........................................................... 0°C to 125°C Storage Temperature Range ............................................................. -65°C to +150°C Solder Temperature (Soldering, 10 seconds) ................................................... 300°C Note 1. Exceeding these ratings could cause damage to the device. PA C K A G E P I N O U T S TERM POWER D0 D1 D2 D3 D4 N.C. GND DISABLE N.C. D8 D7 D6 D5 N.C. N.C. 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 D PACKAGE (Top View) T H E R M A L D ATA D PACKAGE: THERMAL RESISTANCE-JUNCTION TO AMBIENT, θJA 120°C/W DW PACKAGE: THERMAL RESISTANCE-JUNCTION TO AMBIENT, θJA 95°C/W PWP PACKAGE: THERMAL RESISTANCE-JUNCTION TO AMBIENT, θJA 139°C/W TERM POWER D0 D1 D2 D3 D4 N.C. GND Junction Temperature Calculation: TJ = TA + (PD x θJA). The θJA numbers are guidelines for the thermal performance of the device/pc-board system. All of the above assume no ambient airflow. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 DISABLE N.C. N.C. D8 D7 D6 D5 N.C. DW PACKAGE (Top View) TERM POWER HEATSINK/GND D0 D1 D2 D3 D4 HEATSINK/GND N.C. GND 20 2 19 3 18 4 17 5 16 6 15 7 14 8 13 9 12 10 11 DISABLE N.C. HEATSINK/GND N.C. D8 D7 D6 D5 HEATSINK/GND N.C. PWP PACKAGE (Top View) 2 Copyright © 2000 Rev. 1.0 4/00 PRODUCT DATABOOK 1996/1997 UltraMAX LX5115A U LT R A 9 - C H A N N E L S C S I T E R M I N AT O R P R O D U C T I O N D A T A S H E E T R E C O M M E N D E D O P E R AT I N G C O N D I T I O N S Parameter Symbol Termination Voltage High Level Enable Input Voltage Low Level Disable Input Voltage Operating Virtual Junction Temperature Range LX5115AC VTERM VIH VIL (Note 2) Recommended Operating Conditions Min. Typ. Max. Units 3.0 2.5 0 5.5 VTERM 0.8 V V V 0 125 °C Note 2. Range over which the device is functional. ELECTRICAL CHARACTERISTICS Term Power = 4.75V unless otherwise specified. Unless otherwise specified, these specifications apply at the recommended operating ambient temperature of TA = 25°C. Low duty cycle pulse testing techniques are used which maintains junction and case temperatures equal to the ambient temperature. Parameter Output High Voltage Symbol VOUT Term Power Supply Current ICC Output Current IOUT Disable Input Current IIN Output Leakage Current Capacitance in Disabled Mode Channel Bandwidth Termination Sink Current, per Channel Copyright © 2000 Rev. 1.0 4/00 IOL COUT BW ISINK Test Conditions Term Power = 4.75V Term Power = 3.0V All data lines = open All data lines = 0.5V Disable Pin < 0.8V VOUT = 0.5V, Term Power = 4.75V VOUT = 0.5V, Term Power = 3.0V Disable Pin = 4.75V Disable Pin = 0V Disable Pin = < 0.8V, VO = 0.5V VOUT = 0V, frequency = 1MHz VOUT = 4V Min. 2.65 2.1 -21 -17 7 LX5115A Typ. Max. 2.85 2.2 5.5 210 200 -23 -18 80 -12 20 3 35 11 9 225 -24 Units V V mA mA µA mA mA nA µA nA pF MHz mA 3 PRODUCT DATABOOK 1996/1997 UltraMAX LX5115A U LT R A 9 - C H A N N E L S C S I T E R M I N AT O R P R O D U C T I O N D A T A S H E E T BLOCK DIAGRAM TERM POWER CURRENT BIASING CIRCUIT 24mA CURRENT LIMITING CIRCUIT DATA OUTPUT PIN DB(0) 2.85V DISABLE PIN 2.0V 1 OF 9 CHANNELS FUNCTIONAL DESCRIPTION Cable transmission theory suggests to optimize signal speed by delivering 24mA on assertion and by imposing 2.85V on and quality, the termination should act both as an ideal voltage deassertion. In order to disable the device, the Disable pin reference when the line is released (deasserted) and as an must be driven logic Low. This mode of operation places ideal current source when the line is active (asserted). Common the device in a sleep state where a meager 200µA of quiescent active terminators, which consist of current is consumed. Additionally, all Linear Regulators in series with resisPOWER UP / POWER DOWN FUNCTION TABLE outputs are in a Hi-Z (impedance) tors (typically 110Ω), are a comprostate. Sleep mode can be used for Disable Quiescent mise. As the line voltage increases, power conservation or to completely Outputs the amount of current decreases lineliminate the terminator from the SCSI LX5115A Current early by the equation V = I * R. The chain. In the second case, termination H Enabled 5.5mA LX5115A, with its unique new archinode capacitance is important to L HI Z 200µA tecture applies the maximum amount consider. The terminator will appear of current regardless of line voltage as a parasitic distributed capacitance Open Enabled 5.5mA until the termination high threshold on the line, which can detract from bus (2.85V) is reached. performance. For this reason, the Acting as a near ideal line terminator, the LX5115A closely LX5115A has been optimized to have only 3pF of capacitance reproduces the optimum case when the device is enabled. per output in the sleep state. To enable the device the Disable Pin must be pulled Logic An additional feature of the LX5115A is its compatibility with High or left open. During this mode of operation, quiescent active negation drivers. The device handles up to 7mA of sink current is 5.5mA and the device will respond to line demands current for drivers which exceed the 2.85V output high. UltraMAX is a trademark of Linfinity Microelectronics Inc. PRODUCTION DATA - Information contained in this document is proprietary to LinFinity, and is current as of publication date. This document may not be modified in any way without the express written consent of LinFinity. Product processing does not necessarily include testing of all parameters. Linfinity reserves the right to change the configuration and performance of the product and to discontinue product at any time. 4 Copyright © 2000 Rev. 1.0 4/00