Double Balanced Mixer Model M73T RF Band RF 0.8 to 2.4 GHz Electrical Specifications : (1) Specifications Conditions Parameter SSB Conversion loss:(2) RF (GHz) 0.8-2.4 Isolation LO to RF: LO to IF: Input 1 dB Compression Point: LO (GHz) 0.8-3.5 IF (MHz) DC-1.5 Min 25 dB 20 dB 18 dB 0.8-2.0 2.0-3.5 0.8-3.5 Typical 9.0 dB 0.8-3.5 DC-1.5 +0 dBm Desensitization Point: (RF2 @ -1 dBm) 0.8-2.4 0.8-3.5 DC-1.5 +1.0 dBm Input Third Order Intercept Point: 0.8-2.4 0.8-3.5 DC-1.5 +10 dBm (3) 10.5 dB 36 dB 30 dB 21 dB 0.8-2.4 LO Power: Max +7 dBm 0.8-3.5 Notes: 1. Specifications are guaranteed when tested as a downconverter in a 50 Ohm system at +25˚C with +7dBm LO power. Specifications indicated as typical are not guaranteed. 2. SSB Noise figure is nominally within ±0.5 dB of the SSB conversion loss for IF frequencies greater than 10 MHz. 3. Usable LO drives are up to 2 dB below and 3 dB above nominal. M73T Outline: TO-8 Typical Performance at 25˚C SPECTRUM All dimensions are in inches and [mm]. Spectrum Microwave · 2144 Franklin Drive N.E. · Palm Bay, FL 32905 · PH (888) 553-7531 · Fax (888) 553-7532 www.SpectrumMicrowave.com Spectrum Microwave (Europe) · 2707 Black Lake Place · Philadelphia, PA 19154 · PH (215) 464-4000 · Fax (215) 464-4001