Double Balanced Mixer Model MO6xxN Octave Band RF 6.0 to 12.5 GHz Electrical Specifications : (1) Specifications Conditions LO (GHz) 5.0-15.0 5.0-15.0 Parameter SSB Conversion loss: (2) (3) Isolation LO to RF: LO to IF: RF to IF: RF (GHz) 6.0-12.5 6.0-12.5 Input 1-dB Compression Point: 6.0-12.5 5.0-15.0 DC-2500 Input Third Order Intercept Point: 6.0-12.5 5.0-15.0 DC-2500 LO Power: (4) 6.0-12.5 5.0-15.0 DC-2500 IF (MHz) DC-1000 DC-2500 5.0-15.0 5.0-15.0 Min 25 dB 25 dB 6.0-12.5 Typical 4.5 dB 5.5 dB Max 6.5 dB 7.5 dB 37 dB 41 dB 22 dB +1 dBm +4 dBm +8 dBm +12 dBm +11 dBm +14 dBm +18 dBm +22 dBm +7 dBm +10 dBm +14 dBm +19 dBm MO63 MO64 MO66 MO67 MO63 MO64 MO66 MO67 MO63 MO64 MO66 MO67 Model MO6xxN LO Power 3 = +7 dBm 4 = +10 dBm 6 = +14 dBm 7 = +19 dBm Drop-In Module or With SMA(F) Connectors M = Module P = With Connectors Notes: 1. Specifications are guaranteed when tested as a downconverter in a 50 Ohm system from -55˚C to +100˚C with the nominal LO power. Specifications indicated as typical are not guaranteed. 2. Noise figure is typically within ±0.5 dB of conversion loss for IF frequencies greater than 10 MHz. 3. Conversion loss typically degrades less than 0.5 dB at +100˚C and improves less than 0.5 dB at -55˚C. 4. Usable LO drives are up to 2 dB below and 3 dB above nominal. MO6xxN Outline: N Typical Performance at 25˚C SPECTRUM All dimensions are in inches and [mm]. Spectrum Microwave · 2144 Franklin Drive N.E. · Palm Bay, FL 32905 · PH (888) 553-7531 · Fax (888) 553-7532 www.SpectrumMicrowave.com Spectrum Microwave (Europe) · 2707 Black Lake Place · Philadelphia, PA 19154 · PH (215) 464-4000 · Fax (215) 464-4001