RoHS Compliant E-Series 2-way 90˚ Power Divider 120 – 160 MHz Features MAPD-008762-ES0001 V1 SM - 87 Package 2-way 90 Degree Surface Mount Tape and reel packaging available 260°C Reflow Compatible RoHS* compliant version of the MAPDES0001 Description M/A-COM’ s MAPD-008762-ES0001 is a RoHS Compliant 2-way 90˚ power divider in a low cost, surface mount package. Ideally suited for high volume cellular, wireless applications. The MAPD-008762-ES0001 is available in a SM-87 surface mount package and is designed to be utilized in both RoHS and standard reflow profiles. Parts are packaged in tape & reel. Ordering Information Pin Configuration Part Number Package Pin No. Function MAPD-008762-ES0001 Tape and Reel (900 piece Reel) Input 1 Port 1 3 Port 2 6 External 50 Ohms 4 Not Connected 2,5 Absolute Maximum Ratings 1,2 Parameter Absolute Maximum Impedance 50 Ohms nominal RF Power 1 Watt Internal Load Dissipation 0.125 Watt Operating Temperature -40°C to +85°C Storage Temperature -55°C to +125°C 1. Exceeding any one or combination of these limits may cause permanent damage to this device. 2. M/A-COM does not recommend sustained operation near these survivability limits. This PRELIMINARY Data Sheet contains information regarding a product M/A-COM has under development. Performance is based on measured results and target specifications. Commitment to produce in volume is not guaranteed. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant E-Series 2-way 90˚ Power Divider 120 – 160 MHz MAPD-008762-ES0001 V1 Electrical Specifications: TA = 25°C, Z0 = 50 Frequency Range 40 - 1000 MHz Test Conditions 120 - 160 MHz Insertion Loss (Above 3dB) Isolation Amplitude Unbalance Phase Unbalance Nominal — Units dB Min. — Typ. 0.5 Max. 1.0 25 — 120 - 160 MHz — dB 20 120 - 160 MHz 120 - 160 MHz — — dB — 1.0 1.6 0 — 1° 3° Typical Performance Curves Insertion Loss port 2 1.0 1.0 0.8 0.6 0.8 0.6 0.4 0.4 0.2 0.2 dB dB Insertion Loss Port 1 -0.2 0.0 -0.2 -0.4 -0.4 -0.6 -0.6 -0.8 0.0 -0.8 -1.0 120.0 -1.0 125.0 130.0 135.0 140.0 145.0 150.0 155.0 160.0 120.0 130.0 Frequency (MHz) 140.0 150.0 160.0 Frequency (MHz) Amplitude Unbalance Phase Unbalance 95.0 1.5 94.0 93.0 1.0 92.0 91.0 dB dB 0.5 0.0 90.0 89.0 -0.5 88.0 -1.0 87.0 86.0 -1.5 120.0 130.0 140.0 150.0 160.0 Frequency (MHz) 85.0 120.0 125.0 130.0 135.0 140.0 145.0 150.0 155.0 160.0 Frequency (MHz) Isolation -20.0 -22.0 dB -24.0 -26.0 -28.0 -30.0 120.0 125.0 130.0 135.0 140.0 145.0 150.0 155.0 160.0 Frequency (MHz) 2 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information.