MASW4060G GaAs SP4T Switch DC - 4.0 GHz Rev. V4 Features • • • • • Pad Layout Low Insertion Loss, 1.2 dB Typical Fast Switching Speed, 4 nS Typical Ultra Low DC Power Consumption Terminated Option RoHS* Compliant Description M/A-COM’s MASW4060G is an SPDT absorptive or reflective GaAs MESFET MMIC. This part combines small size, low insertion loss and power consumption with high isolation. Ideal for many applications and module use. It will function well for designs below 4.0 GHz. The MASW4060G is fabricated using a mature 1micron gate length GaAs MESFET process. The process features full chip passivation for increased performance and reliability. Ordering Information Die Size - Inches (mm) 0.076 x 0.058 x 0.010 (1.920 x 1.470 x 0.25) Absolute Maximum Rating2,3 Parameter Absolute Maximum Control Value (A or B) -8.5 Vdc Part Number Package Max Input RF Power +34 dBm MASW4060G DIE 1 Storage Temperature -65°C to +175°C Max Operating Temperature +175°C 1. Die quantity varies. Schematic 2. Exceeding any one or combination of these limits may cause permanent damage to this device. 3. M/A-COM does not recommend sustained operation near these survivability limits. Bond Pad Dimensions Bond Pad Dimensions - Inches (mm) RF 0.005 x 0.005 (0.125 x 0.125) RF1, RF2, RF3, RF4 0.004 x 0.004 (0.100 x 0.100) A1, A2, A3, A4 0.004 x 0.004 (0.100 x 0.100) B1, B2, B3, B4 G1, G2, G3, G4 T1, T2, T3, T4 * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 0.004 x 0.004 (0.100 x 0.100) 4 5 0.008 x 0.004 (0.200 x 0.100) 0.006 x 0.005 (0.150 x 0.125) 4. “G” pads designate internal grounds necessary to maintain data sheet isolation. These are not DC blocked and would need to be blocked if positive control voltage is required. 5. “T” pads denote a 50 Ω termination path connected to each RFx port. If bonded to ground, it will cause the related port to be absorptive, or matched, in the isolated condition. As described in note 4, these pads are also not DC blocked. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASW4060G GaAs SP4T Switch DC - 4.0 GHz Rev. V4 Electrical Specifications: 0/-5 Vdc, 50 Ω, -55°C to +85°C 6 Parameter Test Conditions Units Min. Typ. Max. Insertion Loss DC - 0.5 GHz DC - 1.0 GHz DC - 2.0 GHz DC - 4.0 GHz dB dB dB dB — — — — — — — — 1.3 1.3 1.3 1.7 Isolation DC - 0.5 GHz DC - 1.0 GHz DC - 2.0 GHz DC - 4.0 GHz dB dB dB dB 50 45 40 30 — — — — — — — — VSWR DC - 0.5 GHz DC - 1.0 GHz DC - 2.0 GHz DC - 4.0 GHz Ratio Ratio Ratio Ratio — — — — — — — — 1.4:1 1.4:1 1.5:1 2.0:1 Input P-1dB 0.5 GHz 0.5 - 4.0 GHz dBm dBm — — +17 +27 — — IP2 Two Tone Input Power up to +5 dBm 0.5 GHz 0.5 - 4.0 GHz dBm dBm — — +45 +60 — — IP3 Two Tone Input Power up to +5 dBm 0.5 GHz 0.5 - 4.0 GHz dBm dBm — — +35 +46 — — Control Current VIN Low (0 to –0.2 V) VOUT High (-5 V) µA µA — — — 50 25 200 T-rise, T-fall 10% to 90% RF and 90% to 10% RF nS — 2 — TON, TOFF 50% control to 90% RF, and 50% control to 10% RF nS — 4 — Transients In Band mV — 20 — 6. Loss changes ±0.0025 dB/°C. (From -55°C to +85°C) 7 Truth Table Wire Bonding ANT- ANT- ANT- ANTA1 B1 A2 B2 A3 B3 A4 B4 RF1 RF2 RF3 RF4 1 0 0 1 0 1 0 1 On Off Off Off 0 1 1 0 0 1 0 1 Off On Off Off 0 1 0 1 1 0 0 1 Off Off On Off 0 1 0 1 0 1 1 0 Off Off Off On 7. 0 = 0 V to –0.2 V, 1 = -5 V. Handling Procedures Please observe the following precautions to avoid damage: A. Ball or wedge with 1.0 mil diameter pure gold wire. Thermosonic wirebonding with a nominal stage temperature of 150°C and a ball bonding force of 40 to 50 grams or wedge bonding force of 18 to 22 grams is recommended. Ultrasonic energy and time should be adjusted to the minimum levels achieve reliable wirebonds. B. Wirebonds should be started on the chip and terminated on the package. GND bonds should be as short as possible; at least three and no more than four bond wires from ground pads to package are recommended. Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASW4060G GaAs SP4T Switch DC - 4.0 GHz Rev. V4 Typical Performance @ 25°C Handling Precautions Insertion Loss Permanent damage to the MASW4060 may occur if the following precautions are not adhered to: A. Cleanliness - The MASW4060 should be handled in a clean environment. DO NOT attempt to clean unit after MASW4060 is installed. B. Static Sensitivity - All chip handling equipment and personnel should be DC grounded. C. Transient - Avoid instrument and power supply transients while bias is applied to the MASW4060. Use shielded signal and bias cables to minimize inductive pick-up. D. Bias - Apply voltage to either control port V1 or V2 only when the other is grounded. No port should be allowed to “float.” E. General Handling - It is recommended that the MASW4060 chip be handled along the long side of the die with a sharp pair of bent tweezers. DO NOT touch the surface of the chip with fingers or tweezers. 2.0 1.5 1.0 0.5 0.0 0 1 2 3 4 Frequency (GHz) Isolation 65 60 Mounting 55 50 45 40 35 0 1 2 3 4 Frequency (GHz) VSWR 1.4 1.3 1.2 1.1 1.0 0 1 2 Frequency (GHz) 3 4 The MASW4060 is back-metallized with Pd/Ni/Au (100/1,000/10,000Å) metallization. It can be diemounted with AuSn eutectic performs or with thermally conductive epoxy. The package surface should be clean and flat before attachment. Eutectic Die Attach: A. A 80/20 gold/tin perform is recommended with a work surface temperature or approximately 225°C and a tool temperature of 265°C. When hot 90/10 nitrogen/hydrogen gas is applied, tool tip temperature should be approximately 290°C. B. DO NOT expose the MASW4060 to a temperature greater than 320°C for more than 20 seconds. No more than 3 seconds of scrubbing should be required for attachment. Epoxy Die Attach: A. Apply a minimum amount of epoxy and place the MASW4060 into position. A thin epoxy fillet should be visible around the perimeter of the chip. B. Cure epoxy per manufacturer’s recommended schedule. C. Electrically conductive epoxy may be used but is not required. 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.