MB203LCD 16 x 2 LCD Character Display Module for the MB203 module board The MB203LCD is a 16 x 2 Character LCD Display Module compatible with MB203 module board, a precision +/- 5½-digit Digital Voltmeter (DVM) printed circuit board that contains the ALD500R/ALD523D A/D Converter – Display Module Controller chipset. The MB203LCD has built-in Character ROM, display driver and column driver, a 6-inch cable and a 14-pin connector that plugs into the side of the MB203 board. It draws its power directly from theMB203 module board so that a separate power supply source is not required. The MB203LCD, together with the MB203 and a standard +5 V DC power supply source, makes a complete high resolution, high precision Digital Panel Meter. For a complete list of characters available, please see publication DVM523, ALD523D Setup and Calibration Software User Guide, page 15. Key Features • • • • • • • • 16 Characters with 2 lines display Over 200 character fonts available High Display resolution: 5 x 8 dots per character Display with driver mounted on a single printed circuit board Standard CMOS Logic compatible 6 inch cable with 14-pin connector that plugs directly into the MB203 Module Board Displays Multiple Display Sets with the MB203 Module Board Easy to program with the MB203 Module Board software and a standard PC Key Specifications • • • • • • Power Supply: +4.5 V to +5.5V max @ 5mA max. High-Level Input Voltage= 2.2 V to Vcc Low-Level Input Voltage: 0.0 V to 0.6 V Operating Temperature Range: 0 to 50 degrees C. Font size: 4.35 mm x 2.95 mm Overall dimension: 80.0 mm (width) x 36.0 mm (height) x 11.0 mm (depth) MB203LCD © 2002 Advanced Linear Devices, Inc., 415 Tasman Drive, Sunnyvale, California 94089-1706, Tel: (408) 747-1155, Fax: (408) 747-1286 http://www.aldinc.com 1 of 1