ETC 2812018

UK 4-TG
General data
Basic terminal block with screw connection, for
component and fuse connectors, cross section: 0.2 - 4
mm², AWG: 28 - 12, width: 6.2 mm, color: gray
Order number
Type
2812018
UK 4-TG
Barcode number
Unit pack
Customs tariff
4017918076733
50 Pcs.
85369010000
Technical data
General
Number of levels
Number of connections
Color
Insulating material
Inflammability class acc. to UL 94
1
2
gray
PA
V2
Dimensions
Width
Length
Height NS 35:7,5
Height NS 35:15
Height NS 32
Phoenix Contact GmbH & Co. KG
www.phoenixcontact.com
6.2 mm
42.5 mm
47 mm
54.5 mm
52 mm
Page 1/7
Jul 15, 2003
UK 4-TG
Technical data
Maximum load current
Rated surge voltage
Contamination class
Surge voltage category
Insulating material group
Connection in acc. with standard
16 A (with 4 mm² conductor cross section)
6 kV
3
III
I
IEC/ DIN VDE
Connection data
Min. conductor cross section, rigid
Conductor cross section, rigid max.
Conductor cross section flexible min.
Max. conductor cross section, flexible
Min. conductor cross section AWG/kcmil
Conductor cross section AWG/kcmil max
Min. conductor cross section, flexible, with ferrule with
plastic sleeve
Conductor cross section flexible, with ferrule without
plastic sleeve max.
Conductor cross section flexible, with ferrule with plastic
sleeve min.
Max. conductor cross section, flexible, with ferrule with
plastic sleeve
2 conductors with same cross section, solid min.
2 conductors with same cross section, solid max.
2 conductors of the same cross section, flexible, min.
2 conductors with same cross section, flexible max.
2 conductors of the same cross section, flexible, ferrules
without plastic sleeve, min.
2 conductors with identical cross section, flexible,
ferrules with plastic sleeve, max.
2 conductors of the same cross section, flexible, TWIN
ferrules with plastic sleeve, min.
2 conductors with identical cross section, flexible TWIN
ferrules with plastic sleeve, max.
Stripping length
Screw thread
Tightening torque
Phoenix Contact GmbH & Co. KG
www.phoenixcontact.com
0.2 mm²
4 mm²
0.2 mm²
4 mm²
24
12
0.25 mm²
2.5 mm²
0.25 mm²
2.5 mm²
0.2 mm²
1.5 mm²
0.2 mm²
1.5 mm²
0.25 mm²
1.5 mm²
0.5 mm²
1.5 mm²
9 mm
M3
0.6 Nm
Page 2/7
Jul 15, 2003
UK 4-TG
Certificates
UL
Comments
Nominal voltage UN
Nominal current IN
AWG/kcmil
Comments
Nominal voltage UN
Nominal current IN
AWG/kcmil
Comments
Nominal voltage UN
Nominal current IN
AWG/kcmil
with ST-T plug
600 V
20 A
28-12
with ST-BE plug
600 V
5A
28-12
with ST-Si-UK 4 plug
300 V
6.3 A
28-12
CSA
Nominal voltage UN
Nominal current IN
AWG/kcmil
Phoenix Contact GmbH & Co. KG
www.phoenixcontact.com
600 V
15 A
28-12
Page 3/7
Jul 15, 2003
UK 4-TG
Drawings
Approval logo
Phoenix Contact GmbH & Co. KG
www.phoenixcontact.com
Page 4/7
Jul 15, 2003
UK 4-TG
Accessories
Item
Designation
Description
3003224
ATP-UK
3022218
CLIPFIX 35
3003020
1201442
D-UK 4/10
E/UK
1201002
NS 32 GELOCHT METER
1201015
NS 32 UNGELOCHT METER
1201028
NS 32-AL UNGELOCHT
METER
NS 32-CU/ 35 QMM UNGEL.
METER
NS 32-CU/120 QMM UNGEL.
METER
NS 35/ 7,5 GELOCHT METER
Separating plate, for visual and electrical separation of terminal
groups, width: 1.5 mm, color: Gray
Snap-on end bracket, for 35 mm NS 35/7.5 or NS 35/15
mounting rail, can be fitted with Zack strip ZB 8 and ZB 8/27,
terminal strip marker KLM 2 and KLM, width: 9.5 mm, color: gray
Cover, width: 1.8 mm, color: gray
End clamp, for supporting the electronic base, if mounted
vertically, 2 end clamps are required in each case
G-profile DIN rail, material: Steel, perforated, height 15 mm,
width 32 mm, length 2 m
G-profile DIN rail, material: Steel, unperforated, height 15 mm,
width 32 mm, length 2 m
G rail 32 mm (NS 32)
Assembly
1201358
1201280
0801733
0801681
0801762
1201730
1201714
1201798
1201756
1201895
NS 35/15 UNGELOCHT
METER
NS 35/15-2,3 UNGELOCHT
METER
NS 35/15-AL UNGELOCHT
METER
NS 35/15-CU UNGELOCHT
METER
G-profile DIN rail, material: Copper, unperforated, height 15 mm,
width 32 mm, length 2 m
G-profile DIN rail, deep-drawn, material: Copper, unperforated,
height 15 mm, width 32 mm, length 2 m
DIN rail, material: Steel, perforated, height 7.5 mm, width 35
mm, length: 2 m
DIN rail, material: Steel, unperforated, height 7.5 mm, width 35
mm, length: 2 m
DIN rail, material: Copper, unperforated, height 7.5 mm, width
35 mm, length: 2 m
DIN rail, material: Steel, perforated, height 15 mm, width 35 mm,
length: 2 m
DIN rail, material: Steel, unperforated, height 15 mm, width 35
mm, length: 2 m
DIN rail, material: Steel, unperforated, 2.3 mm thick, height 15
mm, width 35 mm, length: 2 m
DIN rail, deep-drawn, high profile, unperforated, 1.5 mm thick,
material: Aluminum, height 15 mm, width 35 mm, length 2 m
DIN rail, material: Copper, unperforated, 1.5 mm thick, height 15
mm, width 35 mm, length: 2 m
EB 2- 6
EB 3- 6
EB 10- 6
Insertion bridge, 2-pos., fully insulated
Insertion bridge, 3-pos., fully insulated
Insertion bridge, 10-pos., divisible, fully insulated
SBS 6:UNBEDRUCKT
ZB 6:SO/CMS
Marker cards for modular terminal blocks, color: white
Zack strip, 10-section, divisible, special printing, marking
according to customer requirements
NS 35/ 7,5 UNGELOCHT
METER
NS 35/ 7,5-CU UNGELOCHT
METER
NS 35/15 GELOCHT METER
Bridges
0201155
0201142
0201139
Marking
1007222
1050499
Phoenix Contact GmbH & Co. KG
www.phoenixcontact.com
Page 5/7
Jul 15, 2003
UK 4-TG
Tools
1205053
SZS 0,6X3,5
Phoenix Contact GmbH & Co. KG
www.phoenixcontact.com
Screwdriver, bladed, matches all screw terminal blocks up to 4.0
mm² connection cross section, blade: 0.6 x 3.5 mm, without VDE
approval
Page 6/7
Jul 15, 2003
UK 4-TG
Address
Phoenix Contact GmbH & Co. KG
Flachsmarktstr. 8
32825 Blomberg
Germany
Tel + 49 - (0) 52 35 - 3-00
Fax + 49 - (0) 52 35 - 3-4 12 00
www.phoenixcontact.com
© Phoenix Contact
Technical modifications reserved
Phoenix Contact GmbH & Co. KG
www.phoenixcontact.com
Page 7/7
Jul 15, 2003