ETC PLC-RSC-120UC/21-21

PLC-RSC-120UC/21-21
General data
PLC relay, consisting of base terminal block PLCBSC.../21 with screw connection and pluggable
miniature relay with power contact, for assembly on
mounting rail NS 35/7.5, 2 PDT, input voltage 120 V AC
/ 110 V DC
Order number
Type
2967086
PLC-RSC-120UC/21-21
Barcode number
Unit pack
Customs tariff
4017918156398
10 Pcs.
85364900990
Technical data
Coil side
Nominal input voltage UN
Nominal input voltage UN
Nominal input current at UN
Nominal input current at UN
Typical response time
Typical release time
Operating voltage display
Protective circuit/component
Phoenix Contact GmbH & Co. KG
www.phoenixcontact.com
120 V AC
110 V DC
4.5 mA (At UN = 120 V AC)
4.2 mA (At UN = 110 V DC)
7 ms
10 ms
Yes
Bridge rectifier
Page 1/8
Jul 15, 2003
PLC-RSC-120UC/21-21
Contact side
Contact type
Contact material
Maximum switching voltage
Minimum switching voltage
Maximum inrush current
Min. switching current
Limiting continuous current
Power rating (ohmic load) max.
Power rating (ohmic load) max.
Power rating (ohmic load) max.
Power rating (ohmic load) max.
Power rating (ohmic load) max.
Power rating (ohmic load) max.
Switching capacity min.
Single contact, 2 PDT
AgNi
250 V AC/DC (The separating plate PLC-ATP should be
installed for voltages larger than 250 V (L1, L2, L3)
between identical terminal blocks in adjacent modules.
Potential bridging is then carried out with FBST 8-PLC...
or ...FBST 500...)
5V
8A
10 mA
6A
140 W (For 24 V DC)
100 W (For 48 V DC)
60 W (For 60 V DC)
44 W (For 110 V DC)
60 W (For 220 V DC)
1500 VA (for 250 V AC)
50 mW
General data
Length
Height
Width
Test voltage relay winding/relay contact
Ambient temperature (operation)
Operating mode
Service life mechanical
Inflammability class acc. to UL 94
Standards/regulations
Standards/regulations
80 mm
94 mm
14 mm
4 kV AC
-20 °C ... 60 °C
100% operating factor
3 x 10<sup>7</sup> cycles
V0
IEC 60 664/IEC 60 664 A/DIN VDE 0110, contamination
class 2, surge voltage category III, DIN VDE 0106-101:
1986-11, increased isolation I/O
DIN EN 50 178/VDE 0160/VDE 0160, IEC 60 255/DIN
VDE 0435 (in relevant parts)
Connection data
Screw thread
Stripping length
Type of connection
Min. conductor cross section, rigid
Conductor cross section, rigid max.
Conductor cross section flexible min.
Max. conductor cross section, flexible
Min. conductor cross section AWG/kcmil
Conductor cross section AWG/kcmil max
Phoenix Contact GmbH & Co. KG
www.phoenixcontact.com
M3
8 mm
Screw connection
0.14 mm²
2.5 mm²
0.14 mm²
2.5 mm²
26
14
Page 2/8
Jul 15, 2003
PLC-RSC-120UC/21-21
Certificates
CUL
Comments
Nominal voltage UN
AWG/kcmil
Comments
Nominal voltage UN
Nominal current IN
AWG/kcmil
Input
120 V
30-12
Output
250 V
6A
30-12
UL
Comments
Nominal voltage UN
AWG/kcmil
Comments
Nominal voltage UN
Nominal current IN
AWG/kcmil
Phoenix Contact GmbH & Co. KG
www.phoenixcontact.com
Input
120 V
30-12
Output
250 V
6A
30-12
Page 3/8
Jul 15, 2003
PLC-RSC-120UC/21-21
Drawings
Diagram
Circuit diagram
Approval logo
Phoenix Contact GmbH & Co. KG
www.phoenixcontact.com
Page 4/8
Jul 15, 2003
PLC-RSC-120UC/21-21
Documentation
Order key
Phoenix Contact GmbH & Co. KG
www.phoenixcontact.com
Page 5/8
Jul 15, 2003
PLC-RSC-120UC/21-21
Accessories
Item
Designation
Description
Assembly
0801733
0801681
0801762
0801377
1201730
1201714
1201798
1201756
1201895
2966841
NS 35/ 7,5 GELOCHT METER DIN rail, material: Steel, perforated, height 7.5 mm, width 35
mm, length: 2 m
NS 35/ 7,5 UNGELOCHT
DIN rail, material: Steel, unperforated, height 7.5 mm, width 35
METER
mm, length: 2 m
NS 35/ 7,5-CU UNGELOCHT DIN rail, material: Copper, unperforated, height 7.5 mm, width
METER
35 mm, length: 2 m
NS 35/ 7,5-V2A UNGELOCHT DIN rail, material: High-grade steel V2A, unperforated, height
5.5 mm, width 15 mm, length: 2 m
NS 35/15 GELOCHT METER DIN rail, material: Steel, perforated, height 15 mm, width 35 mm,
length: 2 m
NS 35/15 UNGELOCHT
DIN rail, material: Steel, unperforated, height 15 mm, width 35
METER
mm, length: 2 m
NS 35/15-2,3 UNGELOCHT
DIN rail, material: Steel, unperforated, 2.3 mm thick, height 15
METER
mm, width 35 mm, length: 2 m
NS 35/15-AL UNGELOCHT
DIN rail, deep-drawn, high profile, unperforated, 1.5 mm thick,
METER
material: Aluminum, height 15 mm, width 35 mm, length 2 m
NS 35/15-CU UNGELOCHT
DIN rail, material: Copper, unperforated, 1.5 mm thick, height 15
METER
mm, width 35 mm, length: 2 m
PLC-ATP BK
Separating plate, 2 mm thick, required at the start and end of a
PLC terminal strip. Furthermore, it is used for: -visual separation
of groups, -safe isolation of different voltages of neighboring
PLC relays in acc. with DIN VDE 0106-101, -isolation
Bridges
2966812
FBST 6-PLC BU
2966825
FBST 6-PLC GY
2966236
FBST 6-PLC RD
2967688
FBST 8-PLC GY
2967691
FBST 14-PLC BK
2966692
FBST 500-PLC BU
2966838
FBST 500-PLC GY
2966786
FBST 500-PLC RD
Phoenix Contact GmbH & Co. KG
www.phoenixcontact.com
Plug-in bridge, 2-pos., 6 mm long, insulated, for potential
distribution with PLC, color of the insulation material: Blue
Plug-in bridge, 2-pos., 6 mm long, insulated, for potential
distribution with PLC, color of the insulation material: Gray
Plug-in bridge, 2-pos., 6 mm long, insulated, for potential
distribution with PLC, color of the insulation material: Red
Plug-in bridge, 2-pos., 8 mm long, insulated, for potential
distribution with PLC, with separating plate, color of the
insulation material: Gray
Plug-in bridge, 2-pos., 14 mm long, insulated, to increase
efficiency with PLC...IC and PLC..HC, color of the insulation
material: Black
Continuous plug-in bridge, 500 mm long, insulated, can be cut to
length, for potential distribution with PLC..., color of the
insulating material: Blue
Continuous plug-in bridge, 500 mm long, insulated, can be cut to
length, for potential distribution with PLC..., color of the
insulating material: Gray
Continuous plug-in bridge, 500 mm long, insulated, can be cut to
length, for potential distribution with PLC..., color of the
insulating material: Red
Page 6/8
Jul 15, 2003
PLC-RSC-120UC/21-21
Marking
1053001
1053014
5060883
ZB 10:UNBEDRUCKT
Zack strip, unprinted: 10-section, for individual labeling with MPEN, ZB-T or CMS system, sufficient for 100 terminal blocks, for
a terminal width of 10.2 mm, color: White
ZB10,LGS:FORTL.ZAHLEN
Zack strip, printed horizontally: 10-section, with the numbers, 110, 11-20 etc. up to 991-1000, color: white
ZB10/WH-100:UNBEDRUCKT Zack strip, unprinted: 10-section, for individual labeling with MPEN, ZB-T or CMS system, large batch, sufficient for labeling
1000 terminal blocks, for a terminal width of 10.2 mm, color:
White
Phoenix Contact GmbH & Co. KG
www.phoenixcontact.com
Page 7/8
Jul 15, 2003
PLC-RSC-120UC/21-21
Address
Phoenix Contact GmbH & Co. KG
Flachsmarktstr. 8
32825 Blomberg
Germany
Tel + 49 - (0) 52 35 - 3-00
Fax + 49 - (0) 52 35 - 3-4 12 00
www.phoenixcontact.com
© Phoenix Contact
Technical modifications reserved
Phoenix Contact GmbH & Co. KG
www.phoenixcontact.com
Page 8/8
Jul 15, 2003