MKP 338 1 X1 Vishay BCcomponents Interference Suppression Film Capacitors MKP Radial Potted Type l l w h FEATURES w 15 to 27.5 mm lead pitch and 15 mm bent back to 7.5 mm. Supplied loose in box, taped on ammopack or reel h h' F' lt P Ø dt (1) F 10 H Ø dt 15 RoHS-compliant product PERMISSIBLE DC VOLTAGE Dimensions in mm DC 1000 V Note (1) |F - F’| < 0.3 mm F = 7.5 + 0.6/- 0.1 mm ENCAPSULATION Plastic case, epoxy resin sealed, flame retardant UL-class 94 V-0 APPLICATIONS For standard across the line X1 applications. See also Application Note: www.vishay.com/docs/28153/anaccaps.pdf CLIMATIC TESTING CLASS ACC. TO IEC 60068-1 55/105/56/B CAPACITANCE RANGE (E12 SERIES) REFERENCE STANDARDS E12 series 0.01 to 1 µF Preferred values acc. to E6 “IEC 60384-14 ed-3 and EN 60384-14” “IEC 60065, pass. flamm. class B” UL1414; UL1283; CSA-C22.2 No. 8 CAPACITANCE TOLERANCE ± 20 %; ± 10 %; ± 5 % MARKING C-value; tolerance; rated voltage; sub-class; manufacturer’s type designation; code for dielectric material; manufacturer location; manufacturer’s logo; year, week and safety approvals. LEADS DIELECTRIC 105 °C Polypropylene film ELECTRODES Metallized film Tinned wire MAXIMUM APPLICATION TEMPERATURE DETAIL SPECIFICATION For more detailed data and test requirements contact: [email protected] CONSTRUCTION Mono construction RATED VOLTAGE AC 440 V; 50 to 60 Hz Document Number: 28116 Revision: 10-Oct-08 For technical questions, contact: [email protected] www.vishay.com 165 MKP 338 1 X1 Vishay BCcomponents Interference Suppression Film Capacitors MKP Radial Potted Type COMPOSITION OF CATALOG NUMBER TYPE AND PITCHES 338 1 X1 BFC2 2222(*) MULTIPLIER (nF) CAPACITANCE (numerically) 7.5 mm (bent back) 15.0 mm 22.5 mm 27.5 mm 0.1 1 10 100 Example: 104 = 10 x 10 = 100 nF (except special numbers) 2 3 4 5 338 1X XX X 338 1X XX X (*) Old ordering code TYPE PACKAGING 338 1 Loose in box X1 Taped on reel (1) 338 1 X1 Taped on reel (1) LEAD CONFIGURATION Lead length 3.5 ± 0.3 mm Lead length 5.0 ± 1.0 mm Lead length 25.0 ± 2.0 mm Bent back to 7.5 mm; H = 16.0 mm; P0 = 15.0 mm; reel diameter = 500 mm ALTERNATIVE TAPED VERSIONS C-TOL ± 20 % H = 18.5 mm; for P0 = 12.7 mm; reel diameter = 500 mm ± 20 % PREFERRED TYPES BFC2 338 10 ... BFC2 338 12 ... BFC2 338 14 ... BFC2 338 16 ... ON REQUEST BFC2 338 17 ... X1 ALTERNATIVE C-TOL. ON REQUEST ± 10 % ±5% ± 10 % ±5% ± 10 % ±5% ± 10 % ±5% ± 10 % ±5% Lead length 3.5 ± 0.3 mm Loose in box 338 1 Lead length 5.0 ± 1.0 mm Lead length 25.0 ± 2.0 mm X1 Taped on reel (1) Bent back to 7.5 mm; H = 16.0 mm; P0 = 15.0 mm; reel diameter = 500 mm H = 18.5 mm; P0 = 12.7 mm; reel diameter = 500 mm See tables for detail Notes (1) For detailed tape specification refer to Packaging Information: www.vishay.com/docs/28139/packinfo.pdf (2) SPQ = Standard Packaging Quantity SPECIFIC REFERENCE DATA DESCRIPTION Rated AC voltage (URac) Permissible DC voltage (URdc) Tangent of loss angle: C ≤ 470 nF C > 470 nF Rated voltage pulse slope (dU/dt)R at 615 Vdc Pitch = 15 mm and 7.5 mm (bent back) Pitch = 22.5 mm Pitch = 27.5 mm VALUE 440 V 1000 V at 1 kHz ≤ 10 x 10-4 ≤ 20 x 10-4 R between leads, for C ≤ 0.33 µF at 100 V; 1 min RC between leads, for C > 0.33 µF at 100 V; 1 min R between leads and case; 100 V; 1 min Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (AC) voltage between leads and case Maximum application temperature www.vishay.com 166 For technical questions, contact: [email protected] at 10 kHz ≤ 20 x 10-4 ≤ 70 x 10-4 250 V/µs 150 V/µs 100 V/µs > 15 000 MΩ > 5000 s > 30 000 MΩ 3400 V; 1 min 2380 V; 1 min 105 °C Document Number: 28116 Revision: 10-Oct-08 MKP 338 1 X1 Interference Suppression Film Capacitors Vishay BCcomponents MKP Radial Potted Type C - tol = 20 % C (µF) DIMENSIONS wxhxl (mm) CATALOG NUMBER BFC2 338...... AND PACKAGING TAPED LOOSE IN BOX reel diameter = 500 mm Short leads Long leads MASS (g) (1) lt = 3.5 ± 0.3 mm Pitch = 15.0 ± 0.4 mm; dt = 0.60 ± 0.06 mm 0.01 10103 0.012 10123 0.015 5.0 x 11.0 x 17.5 1.0 10153 0.018 10183 0.022 10223 0.027 10273 6.0 x 12.0 x 17.5 1.4 0.033 10333 Pitch = 15.0 ± 0.4 mm; dt = 0.80 ± 0.08 mm 0.039 10393 7.0 x 13.5 x 17.5 1.8 0.047 10473 0.056 10563 8.5 x 15.0 x 17.5 2.4 0.068 10683 0.082 10823 10.0 x 16.5 x 17.5 3.0 0.1 10104 Pitch = 22.5 ± 0.4 mm; dt = 0.80 ± 0.08 mm 0.12 10124 8.5 x 18.0 x 26.0 3.8 0.15 10154 0.18 10184 10.0 x 19.5 x 26.0 6.8 0.22 10224 Pitch = 27.5 ± 0.4 mm; dt = 0.80 ± 0.08 mm 0.27 11.0 x 21.0 x 31.0 7.4 10274 0.33 13.0 x 23.0 x 31.0 9.2 10334 0.39 10394 15.0 x 25.0 x 31.0 12.3 0.47 10474 0.56 10564 18.0 x 28.0 x 31.0 16.1 0.68 10684 0.82 10824 21.0 x 31.0 x 31.0 20.3 1.00 10105 lt = 5.0 ± 1.0 mm 12103 12123 12153 12183 12223 12273 12333 12393 12473 12563 12683 12823 12104 12124 12154 12184 12224 12274 12334 12394 12474 12564 12684 12824 12105 SPQ 1000 1000 750 750 500 200 200 100 100 100 100 50 lt = 25.0 ± 2.0 mm 14103 14123 14153 14183 14223 14273 14333 14393 14473 14563 14683 14823 14104 14124 14154 14184 14224 14274 14334 14394 14474 14564 14684 14824 14105 SPQ 1000 1000 500 500 450 250 200 H = 18.5 mm; P0 = 12.7 mm 17103 17123 17153 17183 17223 17273 17333 17393 17473 17563 17683 17823 17104 17124 17154 17184 17224 SPQ 1100 900 800 650 600 450 350 125 125 125 100 75 Note (1) Weight for short lead products only BENT BACK PITCH 7.5 mm (only taped); C-tol = ± 20 % C (µF) DIMENSIONS wxhxl (mm) CATALOG NUMBER BFC2 338...... AND PACKAGING TAPED LOOSE IN BOX reel diameter = 500 mm (1) Short leads Long leads MASS (g) (2) lt = 3.5 ± 0.3 mm lt = 5.0 ± 1.0 mm SPQ lt = 25.0 ± 2.0 mm Original pitch = 15.0 mm; bent back pitch = 7.5 ± 0.4 mm; dt = 0.60 ± 0.06 mm 0.010 0.012 0.015 5.0 x 13.0 x 17.5 1.0 0.018 0.022 0.027 6.0 x 14.0 x 17.5 1.4 0.033 Original pitch = 15.0 mm; bent back pitch = 7.5 ± 0.4 mm; dt = 0.80 ± 0.08 mm 0.039 7.0 x 15.5 x 17.5 1.8 0.047 0.056 8.5 x 17.0 x 17.5 1.4 0.068 0.082 10.0 x 18.5 x 17.5 3.0 0.100 SPQ H = 16.0 mm; P0 = 15.0 mm 16103 16123 16153 16183 16223 16273 16333 16393 16473 16563 16683 16823 16104 SPQ 950 800 700 550 500 Notes (1) Reel diameter = 356 mm is available on request (2) Weight for short lead product only Document Number: 28116 Revision: 10-Oct-08 For technical questions, contact: [email protected] www.vishay.com 167 MKP 338 1 X1 Vishay BCcomponents Interference Suppression Film Capacitors MKP Radial Potted Type C-tol = ± 10 % C (µF) DIMENSIONS wxhxl (mm) CATALOG NUMBER BFC2 338...... AND PACKAGING TAPED LOOSE IN BOX reel diameter = 500 mm Short leads Long leads MASS (g) (1) lt = 3.5 ± 0.3 mm Pitch = 15.0 ± 0.4 mm; dt = 0.60 ± 0.06 mm 0.010 18114 0.012 18115 5.0 x 11.0 x 17.5 1.0 0.015 18116 0.018 18117 0.022 18118 6.0 x 12.0 x 17.5 1.4 0.027 18119 Pitch = 15.0 ± 0.4 mm; dt = 0.80 ± 0.08 mm 0.033 18121 7.0 x 13.5 x 17.5 1.8 0.039 18122 0.047 18123 8.5 x 15.0 x 17.5 2.4 0.056 18124 0.068 18125 10.0 x 16.5 x 17.5 3.0 0.082 18126 Pitch = 22.5 ± 0.4 mm; dt = 0.80 ± 0.08 mm 0.10 7.0 x 16.5 x 26.0 2.9 18127 0.12 18128 8.5 x 18.0 x 26.0 3.8 0.15 18129 0.18 10.0 x 19.5 x 26.0 6.8 18131 Pitch = 27.5 ± 0.4 mm; dt = 0.80 ± 0.08 mm 0.22 18132 11.0 x 21.0 x 31.0 7.4 0.27 18133 0.33 13.0 x 23.0 x 31.0 9.2 18134 0.39 18135 15.0 x 25.0 x 31.0 12.3 0.47 18136 0.56 18137 18.0 x 28.0 x 31.0 16.1 0.68 18138 0.82 21.0 x 31.0 x 31.0 20.3 18139 lt = 5.0 ± 1.0 mm 18314 18315 18316 18317 18318 18319 18321 18322 18323 18324 18325 18326 18327 18328 18329 18331 18332 18333 18334 18335 18336 18337 18338 18339 SPQ 1000 1000 750 750 500 200 200 200 100 100 100 100 50 lt = 25.0 ± 2.0 mm 18514 18515 18516 18517 18518 18519 18521 18522 18523 18524 18525 18526 18527 18528 18529 18531 18532 18533 18534 18535 18536 18537 18538 18539 SPQ 1000 1000 500 500 450 250 250 200 H = 18.5 mm; P0 = 12.7 mm 18914 18915 18916 18917 18918 18919 18921 18922 18923 18924 18925 18926 18927 18928 18929 18931 SPQ 1100 900 800 650 600 550 450 350 125 125 125 100 75 Note (1) Weight for short lead products only BENT BACK PITCH 7.5 mm (only taped); C-tol = ± 10 % CATALOG NUMBER BFC2 338...... AND PACKAGING LOOSE IN BOX TAPED C MASS reel diameter = 500 mm (1) Short leads Long leads (µF) (g) (2) lt = H = 18.5 mm; lt = lt = SPQ SPQ SPQ P0 = 12.7 mm 3.5 ± 0.3 mm 5.0 ± 1.0 mm 25.0 ± 2.0 mm Original pitch = 15.0 mm; bent back pitch = 7.5 ± 0.4 mm; dt = 0.60 ± 0.06 mm 0.010 18714 0.012 18715 5.0 x 13.0 x 17.5 1.0 950 0.015 18716 0.018 18717 0.022 18718 6.0 x 14.0 x 17.5 1.4 800 0.027 18719 Original pitch = 15.0 mm; bent back pitch = 7.5 ± 0.4 mm; dt = 0.80 ± 0.08 mm 0.033 18721 7.0 x 15.5 x 17.5 1.8 700 0.039 18722 18723 0.047 8.5 x 17.0 x 17.5 2.4 550 0.056 18724 0.068 18725 10.0 x 18.5 x 17.5 3.0 500 0.082 18726 Notes (1) Reel diameter = 356 mm is available on request (2) Weight for short lead product only DIMENSIONS wxhxl (mm) www.vishay.com 168 For technical questions, contact: [email protected] Document Number: 28116 Revision: 10-Oct-08 MKP 338 1 X1 Interference Suppression Film Capacitors Vishay BCcomponents MKP Radial Potted Type C-tol = ± 5 % C (µF) DIMENSIONS wxhxl (mm) CATALOG NUMBER BFC2 338...... AND PACKAGING LOOSE IN BOX TAPED reel diameter = 500 mm Short leads Long leads MASS (g) (1) lt = 3.5 ± 0.3 mm Pitch = 15.0 ± 0.4 mm; dt = 0.60 ± 0.06 mm 0.010 18214 0.012 18215 5.0 x 11.0 x 17.5 1.0 0.015 18216 0.018 18217 0.022 18218 6.0 x 12.0 x 17.5 1.4 0.027 18219 Pitch = 15.0 ± 0.4 mm; dt = 0.80 ± 0.08 mm 0.033 18221 7.0 x 13.5 x 17.5 1.8 0.039 18222 0.047 18223 8.5 x 15.0 x 17.5 2.4 0.056 18224 0.068 18225 10.0 x 16.5 x 17.5 3.0 0.082 18226 Pitch = 22.5 ±0.4 mm; dt = 0.80 ± 0.08 mm 0.10 18227 8.5 x 18.0 x 26.0 3.8 0.12 18228 0.15 18229 10.0 x 19.5 x 26.0 4.4 0.18 18231 Pitch = 27.5 ± 0.4 mm; dt = 0.80 ± 0.08 mm 0.22 11.0 x 21.0 x 31.0 7.4 18232 0.27 18233 13.0 x 23.0 x 31.0 9.2 0.33 18234 0.39 18235 15.0 x 25.0 x 31.0 12.3 0.47 18236 0.56 18237 18.0 x 28.0 x 31.0 16.1 0.68 18238 0.82 21.0 x 31.0 x 31.0 20.3 18239 lt = 5.0 ± 1.0 mm 18414 18415 18416 18417 18418 18419 18421 18422 18423 18424 18425 18426 18427 18428 18429 18431 18432 18433 18434 18435 18436 18437 18438 18439 SPQ 1000 1000 750 750 500 200 200 100 100 100 100 50 lt = 25.0 ± 2.0 mm 18614 18615 18616 18617 18618 18619 18621 18622 18623 18624 18625 18626 18627 18628 18629 18631 18632 18633 18634 18635 18636 18637 18638 18639 SPQ 1000 1000 500 500 450 250 200 H = 18.5 mm; P0 = 12.7 mm 18934 18935 18936 18937 18938 18939 18941 18942 18943 18944 18945 18946 18947 18948 18949 18951 SPQ 1100 900 800 650 600 450 350 125 125 125 100 75 Note (1) Weight for short lead product only BENT BACK PITCH (only taped); C-tol = ± 5 % C (µF) DIMENSIONS wxhxl (mm) MASS (g) (2) CATALOG NUMBER BFC2 338...... AND PACKAGING LOOSE IN BOX TAPED reel diameter = 500 mm (1) Short leads Long leads lt = 3.5 ± 0.3 mm lt = 5.0 ± 1.0 mm SPQ lt = 25.0 ± 2.0 mm Original pitch = 15.0 mm; bent back pitch = 7.5 ± 0.4 mm; dt = 0.60 ± 0.06 mm 0.010 0.012 5.0 x 13.0 x 17.5 1.0 0.015 0.018 0.022 6.0 x 14.0 x 17.5 1.4 0.027 Original pitch = 15.0 mm; bent back pitch = 7.5 ± 0.4 mm; dt = 0.80 ± 0.08 mm 0.033 7.0 x 15.5 x 17.5 1.8 0.039 0.047 8.5 x 17.0 x 17.5 2.4 0.056 0.068 10.0 x 18.5 x 17.5 3.0 0.082 Notes (1) Reel diameter = 356 mm is available on request (2) Weight for short lead product only Document Number: 28116 Revision: 10-Oct-08 For technical questions, contact: [email protected] SPQ H = 16.0 mm; P0 = 15.0 mm 18814 18815 18816 18817 18818 18819 18821 18822 18823 18824 18825 18826 SPQ 950 800 700 550 500 www.vishay.com 169 MKP 338 1 X1 Vishay BCcomponents Interference Suppression Film Capacitors MKP Radial Potted Type SAFETY APPROVALS X1 VOLTAGE VALUE FILE NUMBERS EN 60384-14 (ENEC) 440 Vac 10 nF to 1 µF F1 2008060 (= IEC 60384-14 ed-3) UL1414 250 Vac 10 nF to 1 µF E112471 UL1283 440 Vac 10 nF to 100 nF E109565 UL1283 and (CSA-C22.2 No. 8) 440 Vac 100 nF to 1 µF E109565 CB-Test Certificate 440 Vac 10 nF to 1 µF F1 5256 The Enec-approval together with the CB-Certificate replace all national marks of the following countries (they have already signed the ENEC-Agreement): Austria; Belgium; Czech. Republic; Denmark; Finland; France; Germany; Greece; Hungary; Ireland; Italy; Luxembourg; Netherlands; Norway; Portugal; Slovenian; Spain; Switzerland and United Kingdom. ® 16 MOUNTING Normal Use The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for mounting in printed-circuit boards by means of automatic insertion machines. For detailed tape specifications refer to “Packaging Information”: www.vishay.com/docs/28139/packinfo.pdf Specific Method of Mounting to Withstand Vibration and Shock In order to withstand vibration and shock tests, it must be ensured that the stand-off pips are in good contact with the printed-circuit board: • For pitches ≤ 15 mm capacitors shall be mechanically fixed by the leads • For longer pitches the capacitors shall be mounted in the same way and the body clamped Space Requirements on printed Circuit Board The maximum length and width of film capacitors is shown in drawing: • Eccentricity as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned • Product height with seating plane as given by “IEC 60717” as reference: hmax. ≤ h’ + 0.3 mm bmax. = b + 0.3 mm Eccentricity lmax. = I + 0.3 mm CBA116 Storage Temperature • Storage temperature: Tstg = - 25 to + 40 °C with RH maximum 80 % without condensation Ratings and Characteristics Reference Conditions Unless otherwise specified, all electrical values apply to an ambient temperature of 23 ± 1 °C, an atmospheric pressure of 86 to 106 kPa and a relative humidity of 50 ± 2 %. For reference testing, a conditioning period shall be applied over 96 ± 4 hours by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20 %. www.vishay.com 170 For technical questions, contact: [email protected] Document Number: 28116 Revision: 10-Oct-08 MKP 338 1 X1 Interference Suppression Film Capacitors Vishay BCcomponents MKP Radial Potted Type CHARACTERISTICS Capacitance as a function of ambient temperature (typical curve) Tanget of loss angle as a function of frequency (typical curve) 10 3 ΔC/C (%) Dissipation Factor (x 10- 4) 4 2 typical 10 2 0 µF =1 F C < 1µ C F F < 20 n 0n C≤2 2 2 < F 7n nF 47 < C ≤ 4 F 10 n max. -2 101 -4 min. -6 - 50 0 10 Tamb (°C) 100 50 Impedance as a function of frequency (typical curve) 10 nF nF 10 1 10 10 0 F 47 0n F 10 00 nF 10 3 10 f(Hz) 10 5 4 10 1 0n X1 0 -1 -2 10 4 10 5 10 6 7 10 f (Hz) 10 8 Max. RMS voltage as a function of frequency 10 -1 10 100 1000 10 000 °C (nF) Max. RMS current as a function of frequency 3 10 4 AC voltage (V) 10 AC current (mA) 10 2 2 10 10 10 f (Mhz) 10 47 1 Resonant frequency as a function of capacitance (typical curve) 3 Impedance (I) 10 0 10 1000 nF 470 nF 10 2 100 nF 47 nF 10 1 10 nF 4.7 nF 10 0 1nF 2 10 Tamb ≤ 105 °C Tamb ≤ 105 °C 101 1 10 10 10 2 Document Number: 28116 Revision: 10-Oct-08 10 3 4 10 f (Hz) 105 -1 10 1 10 2 For technical questions, contact: [email protected] 10 3 10 4 f (Hz) 10 5 www.vishay.com 171 MKP 338 1 X1 Vishay BCcomponents Interference Suppression Film Capacitors MKP Radial Potted Type Insulation resistance RC (s) 106 105 104 0 20 40 60 80 100 Tamb (°C) APPLICATION NOTES • For X1 electromagnetics interference suppression in standard across the line applications (50/60 Hz) with a maximum mains voltage of 440 Vac. • For series impedance applications we refer to Application Note www.vishay.com/docs/28153/anaccaps.pdf • These capacitors are not intended for continuous pulse applications. For these situations, capacitors of the AC and pulse programs must be used. • The maximum ambient temperature must not exceed 105 °C. • Rated voltage pulse slope: If the pulse voltage is lower than the rated voltage, the values of the specific reference data can be multiplied by 615 Vdc and divided by the applied voltage. www.vishay.com 172 For technical questions, contact: [email protected] Document Number: 28116 Revision: 10-Oct-08 MKP 338 1 X1 Interference Suppression Film Capacitors Vishay BCcomponents MKP Radial Potted Type INSPECTION REQUIREMENTS General Notes: 1. Sub-clause numbers of tests and performance requirements refer to the “Sectional Specification, Publication IEC 60384-14 ed-3 and Specific Reference Data.” Group C inspection requirements SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS SUB-GROUP C1A PART OF SAMPLE OF SUB-GROUP C1 4.1 Dimensions (detail) As specified in chapters “General data” of this specification Initial measurements Capacitance Tangent of loss angle at 10 kHz 4.3 Robustness o terminations Tensile: load 10 N; 10 s Bending: load 5 N; 4 x 90° 4.4 Resistance to soldering heat No pre-drying Method: 1A Solder bath: 280 °C ± 5 °C Duration: 10 s 4.19 Component solvent resistance Isopropylalcohol at room temperature Method: 2 Immersion time: 5 ± 0.5 min Recovery time: Min. 1 h, max 2 h 4.4.2 Final measurements Visual examination No visible damage Legible marking Capacitance |ΔC/C| ≤ 5 % of the value measured initially Tangent of loss angle Increase of tan δ ≤ 0.008 Compared to values measured initially Insulation resistance As specified in section “Insulation resistance” of this specification No visible damage SUB-GROUP C1B PART OF SAMPLE OF SUB-GROUP C1 Initial measurements Capacitance Tangent of loss angle at 10 kHz 4.20 Solvent resistance of the marking Isopropylalcohol at room temperature Method: 1 Rubbing material: cotton wool Immersion time: 5 ± 0.5 min 4.6 Rapid change of temperature θA = - 55 °C θB = + 105 °C 5 cycles No visible damage Legible marking Duration t = 30 min Document Number: 28116 Revision: 10-Oct-08 For technical questions, contact: [email protected] www.vishay.com 173 MKP 338 1 X1 Vishay BCcomponents Interference Suppression Film Capacitors MKP Radial Potted Type SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS 4.6.1 4.7 Inspection Vibration Visual examination Mounting: See section “Mounting” of this specification Procedure B4 Frequency range: 10 to 55 Hz Amplitude: 0.75 mm or Acceleration 98 m/s² (whichever is less severe) Total duration 6 h No visible damage 4.7.2 Final inspection Visual examination No visible damage 4.9 Shock Mounting: See section “Mounting” for more information Pulse shape: half sine Acceleration: 490 m/s² Duration of pulse: 11 ms 4.9.2 Final measurements Visual examination No visible damage Capacitance |ΔC/C| ≤ 5 % of the value measured initially Tangent of loss angle Increase of tan δ ≤ 0.008 Compared to values measured initially Insulation resistance As specified in section “Insulation Resistance” of this specification SUB-GROUP C1 COMBINED SAMPLE OF SPECIMENS OF SUB-GROUPS C1A AND C1B 4.11 Climatic sequence 4.11.1 Initial measurements Capacitance Measured in 4.4.2 and 4.9.2 Tangent of loss angle: Measured initially in C1A and C1B 4.11.2 Dry heat Temperature: 105 °C Duration: 16 h 4.11.3 Damp heat cyclic Test Db First cycle 4.11.4 Cold Temperature: - 55 °C Duration: 2 h 4.11.5 Damp heat cyclic Test Db Remaining cycles 4.11.6 Final measurements www.vishay.com 174 Visual examination No visible damage Legible marking Capacitance |ΔC/C| ≤ 5 % of the value measured in 4.11.1. Tangent of loss angle Increase of tan δ ≤ 0.008 Compared to values measured in 4.11.1. Voltage proof 1900 Vdc; 1 min between terminations No permanent breakdown or flash-over Insulation resistance ≥ 50 % of values specified in section “Insulation resistance” of this specification For technical questions, contact: [email protected] Document Number: 28116 Revision: 10-Oct-08 MKP 338 1 X1 Interference Suppression Film Capacitors Vishay BCcomponents MKP Radial Potted Type SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS SUB-GROUP C2 4.12 Damp heat steady state 56 days, 40 °C, 90 to 95 % RH No load 4.12.1 Initial measurements Capacitance Tangent of loss angle at 1 kHz 4.12.3 Final measurements Visual examination No visible damage Legible marking Capacitance |ΔC/C| ≤ 5 % of the value measured in 4.12.1. Tangent of loss angle Increase of tan δ ≤ 0.008 Compared to values measured in 4.12.1. Voltage proof 1900 Vdc; 1 min between terminations No permanent breakdown or flash-over Insulation resistance ≥ 50 % of values specified in section “Insulation resistance” of this specification SUB-GROUP C3 4.13.1 Initial measurements Capacitance Tangent of loss angle at 10 kHz 4.13 Impulse voltage 3 successive impulses, full wave, peak voltage: X1: 4 kV Max. 24 pulses 4.14 Endurance Duration: 1000 h 1.25 x URac at 105 °C Once in every hour the voltage is increased to 1000 Vrms for 0.1 s via resistor of 47 Ω ± 5 % 4.14.7 Final measurements No self healing breakdowns or flashover Visual examination No visible damage Legible marking Capacitance |ΔC/C| ≤ 10 % compared to values measured in 4.13.1. Tangent of loss angle Increase of tan δ ≤ 0.008 Compared to values measured in 4.13.1. Voltage proof 1900 Vdc; 1 min between terminations 2380 Vac; 1 min between terminations and case. No permanent breakdown or flash-over Insulation resistance ≥ 50 % of values specified in section “Insulation resistance” of this specification SUB-GROUP C4 4.15 Charge and discharge 10 000 cycles Charged to 615 Vdc Discharge resistance: 616 Vdc R = --------------------------------------1.5 x C (dU/dt) 4.15.1 Initial measurements Document Number: 28116 Revision: 10-Oct-08 Capacitance Tangent of loss angle at 10 kHz For technical questions, contact: [email protected] www.vishay.com 175 MKP 338 1 X1 Vishay BCcomponents Interference Suppression Film Capacitors MKP Radial Potted Type SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS 4.15.3 Final measurements Capacitance |ΔC/C| ≤ 10 % compared to values measured in 4.15.1. Tangent of loss angle Increase of tan δ ≤ 0.008 Compared to values measured in 4.15.1. Insulation resistance ≥ 50 % of values specified in section “Insulation resistance” of this specification Resonance frequency ≥ 0.9 times value as specified in section “Resonant frequency” of this specification Bore of gas jet: Ø 0.5 mm Fuel: Butane Test duration for actual volume V in mm³: V ≤ 250: 10 s 250 < V ≤ 500: 20 s 500 < V ≤ 1750: 30 s V > 1750: 60 s One flame application After removing test flame from capacitor, the capacitor must not continue to burn for more than 10 s. No burning particle must drop from the sample. SUB-GROUP C5 4.16 Radio frequency characteristic SUB-GROUP C6 4.17 Passive flammability Class B 12 mm ~ 8 mm 45.0° SUB-GROUP C7 4.18 Active flammability www.vishay.com 176 20 cycles of 4 kV discharges on the test capacitor connected to URac For technical questions, contact: [email protected] The cheese cloth around the capacitors shall not burn with a flame. No electrical measurements are required. Document Number: 28116 Revision: 10-Oct-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1