Product Approval Sheet Safety Customer : WPI Issued no : 2014. 02. 02. Revision no : Product description : EMI Suppression film capacitors Product code : PCX2 337z6zzzz (Mini) 337L60474/PCX2 337L61474 PCX2 337L64474/PCX2 337L65474 Application : CUSTOMER Checked Confirmed Approved PILKOR Headquarters : 381, Woncheon-dong, Yeong tong-gu, Suwon-si, Gyeonggi-do, Korea PILKOR Electronics Co., Ltd. TEL. +82-31-217-2500 FAX. +82-31-217-7465 China factory : No 25 Zoutai South Road Rongcheng City, Shandong Province China Rongcheng PILKOR Electronics Co., Ltd. TEL. +86-631-755-6001~3 * Please send it back to us before placing order. FAX, +86-631-755-6004 ---------------------------------------------------------------------------------------------Capacitor as PCX2 337x6.... acc. to Type spec. QSN-075-53 ---------------------------------------------------------------------------------------------- Safety b l h Lt dt P dt = 0.8+0.08/-0.05mm Code Dimensions Voltage Cap. V~ ㎌ 275 0.47 L60474 ±20 % 275 0.47 L61474 275 0.47 L64474 PCX2 337 P Lt mm mm 9.0 x 19.0 x 31.0 27.5±0.4 5.0±1.0 ±10 % 9.0 x 19.0 x 31.0 27.5±0.4 5.0±1.0 ±20 % 9.0 x 19.0 x 31.0 27.5±0.4 25.0±2.0 9.0 x 19.0 x 31.0 27.5±0.4 25.0±2.0 C-tol. b ×h ×l ...... mm 275 0.47 L65474 ±10 % CAPACITOR SAME AS PCX2 337L6(0,1,4,5)684 < BUT > - Value Extension : Capacitance - 0.47uF - PACKING METHOD : LOOSE IN BOX CODE PCX2 337L60474 PCX2 337L61474 PCX2 337L64474 PCX2 337L65474 박 주 영 김 성 환 Packing method SPQ PQ 8242 450 40026 500 (8242 451 30211) 2000 (8242 451 30301) 8242 450 40028 500 (8242 451 30231) 2000 (8242 451 30321) MKP RADIAL POTTED CAPACITORS 12-08-12 QS 박범학 1 PCX2 337L60474 PCX2 337L61474 PCX2 337L64474 PCX2 337L65474 190-1 010 (C) PILKOR ELECTRONICS, LTD. 2012 12-10-12 QS A4 Pilkor components EMI Suppression Film capacitors PCX2 337x6 (Mini) Safety MKP RADIAL POTTED CAPACITORS Pitch 10.0/15.0/22.5/27.5mm 10 and 15mm 22.5 and 27.5mm QUICK REFERENCE DATA 0.001㎌ to 3.3㎌ Capacitance range (E6 series) * Capacitance tolerance ± 10 %, ± 20 % Rated (AC) voltage 50 to 60 Hz 275 V~ Climatic category 40/105/21 Temperature range -40℃ ~ +105℃ Reference IEC specification IEC 60384-14(3rd edition) and EN 60384-14 Safety approvals UL60384-14 & CSA E60384-14:09(cUL), ENEC, EK, CQC Potting & Encapsulation material Qualified in accordance with UL 94V-0 Safety class X2 * Intermediate values of the E12 series are available to special order FEATURES APPLICATIONS . 10 to 27.5 mm lead pitch . For X2-electromagnetic interference suppression . Supplied loose in box and taped on reel . Specially designed to meet the NEW REQUIREMENTS . Consist of a low-inductive wound cell of Metallized (PP) film of new IEC 60384-14 Specification(3rd edition)/ EN 60384-14/UL60384-14 requiring a 2.5kV peak pulse . potted in a flame retardant case voltage test . Not for use in series with the mains • Please refer to caution and warning at http://www.pilkor.co.kr/download/Introductions.pdf before using these products. TYPE SPECIFICATION 14-01-14 ( C ) PILKOR ELECTRONICS 2014 1 OF 22 QSN-075-53 Pilkor components EMI Suppression Film capacitors PCX2 337x6 (Mini) Safety Ordering Information l b l h h H lt P dt P0 PCX2 337 X X X XXX Capacitance Code 6 F Version & Voltage Mini-Cp / 275V Low h-Cp / 275V Code D F J L Original Pitch 10.0 mm 15.0 mm 22.5 mm 27.5 mm Available versions Product (lmax) code Packing method C – tol. Lead length & Height Hole to hole ( Po) 12.5 0 Loose in box ±20% lt = 5.0±1.0mm - 10.0 15.0 22.5 27.5 1 Loose in box ±10% lt = 5.0±1.0mm - 10.0 15.0 22.5 27.5 4 Loose in box ±20% lt =25.0±2.0mm - 10.0 15.0 22.5 27.5 5 Loose in box ±10% lt =25.0±2.0mm - 10.0 15.0 22.5 27.5 6 Ammopack ±20% H = 18.5mm* 12.7mm 10.0 15.0 22.5 27.5 7 Ammopack ±10% H = 18.5mm* 12.7mm 10.0 15.0 22.5 27.5 18.0 26.0 31.0 Pitch (P) * H ; intape height ; for detailed specifications refer to chapter PACKAGING ** Some values is not following the coding rule. TYPE SPECIFICATION 11-06-02 ( C ) PILKOR ELECTRONICS 2011 2 OF 22 QSN-075-53 Pilkor components EMI Suppression Film capacitors PCX2 337x6 (Mini) Safety SAFETY APPROVALS Voltage Value File Number 305V(AC) 1nF to 3.3㎌ E165646 ENEC(SEMKO) * 275V(AC) 1nF to 3.3㎌ SE/0256-1 EK 275V(AC) 10nF to 3.3㎌ SH03001-2003 CQC 275V(AC) 10nF to 3.3㎌ CQC04001009332 SAFETY APPROVALS UL 60384-14 & CSA E60384-14:09(cUL) * The ENEC-approval together with the CB-Certificate replace all national approval marks of the following countries(they have already signed the ENEC-Agreement): Austria; Belgium; Czech. Republic; Denmark; Finland; France; Germany; Greece; Hungary; Ireland; Italy; Luxembourg; Netherlands; Norway; Portugal; Slovenian; Spain; Sweden; Switzerland and United Kingdom Packaging Information SMALLEST PACKING QUANTITIES (SPQ) LOOSE IN BOX DIMENSIONS lt = 5.0 ± 1.0 mm lt = 25 ± 2.0 mm 4.0 x 10.0 x 12.5 5.0 x 11.0 x 12.5 6.0 x 12.0 x 12.5 5.0 x 11.0 x 18.0 6.0 x 12.0 x 18.0 7.0 x 13.5 x 18.0 8.5 x 13.5 x 18.0 8.5 x 15.0 x 18.0 10.0 x 16.5 x 18.0 11.0 x 18.5 x 18.0 6.0 x 15.5 x 26.0 7.0 x 16.5 x 26.0 8.5 x 18.0 x 26.0 10.0 x 19.5 x 26.0 11.5 x 21.0 x 26.0 13.0 x 23.0 x 26.0 2000 1500 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 500 500 500 500 1200 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 500 500 500 500 17.0 x 22.0 x 26.0 250 250 9.0 x 18.0 x 31.0 11.0 x 21.0 x 31.0 13.0 x 23.0 x 31.0 15.0 x 25.0 x 31.0 18.0 x 28.0 x 31.0 500 500 250 250 200 500 250 250 250 200 TYPE SPECIFICATION 13-12-06 ( C ) PILKOR ELECTRONICS 2013 3 OF 22 QSN-075-53 Pilkor components EMI Suppression Film capacitors PCX2 337x6 (Mini) Safety SPECIFIC REFERENCE DATA FOR 275 VAC Tangent of loss angle at 1 khz at 10 khz -4 C ≤ 470 ㎋ 470 ㎋ < C ≤ 1 ㎌ C> 1 ㎌ ≤ 20 x 10 -4 ≤ 70 x 10 -4 - ≤ 10 x 10 ≤ 20 x 10 -4 ≤ 30 x 10 –4 Rated voltage pulse slope (dV/dt)R P = 10.0mm P = 15.0mm P = 22.5mm P = 27.5mm 400 V/㎲ 300 V/㎲ 150 V/㎲ 100 V/㎲ R between leads, for C ≤ 0.33 ㎌ 〉15 000 ㏁ RC between leads, for C > 0.33 ㎌ 〉5 000 s Withstanding(DC) Voltage (cut-off current 10mA) C ≤ 1 ㎌ C > 1 ㎌ 2250 V 1min 1850 V 1min Withstanding(AC) Voltage between leads and case 2400V 1min VRac = 275 V~ X2 Cap. (㎌) loose and taped bxhxl (mm) CATALOGUE NUMBER PCX2 337 ..... loose in box lt = 5 ± 1.0 mm lt = 25 ± 2.0 mm MASS (g) C – tol. ±20 % Pitch = 10.0 ± 0.4 mm C – tol. ±10 % C – tol. ±20 % C – tol. ±10 % dt = 0.6 +0.06/-0.05 mm 0.001 4.0x 10.0x 12.5 0.8 D60102 D61102 D64102 D65102 0.0015 4.0x 10.0x 12.5 0.8 D60152 D61152 D64152 D65152 0.0022 4.0x 10.0x 12.5 0.8 D60222 D61222 D64222 D65222 0.0033 4.0x 10.0x 12.5 0.8 D60332 D61332 D64332 D65332 0.0047 4.0x 10.0x 12.5 0.8 D60472 D61472 D64472 D65472 0.0068 4.0x 10.0x 12.5 0.8 D60682 D61682 D64682 D65682 0.01 4.0x 10.0x 12.5 0.8 D60103 D61103 D64103 D65103 0.015 4.0x 10.0x 12.5 0.8 D60153 D61153 D64153 D65153 0.022 4.0x 10.0x 12.5 0.8 D60223 D61223 D64223 D65223 0.033 5.0x 11.0 x 12.5 0.9 D60333 D61333 D64333 D65333 0.047 5.0x 11.0 x 12.5 0.9 D60473 D61473 D64473 D65473 0.068 6.0 x 12.0 x 12.5 1.0 D60683 D61683 D64683 D65683 0.1 6.0 x 12.0 x 12.5 1.0 D60104 D61104 D64104 D65104 TYPE SPECIFICATION 13-02-18 ( C ) PILKOR ELECTRONICS 2013 4 OF 22 QSN-075-53 Pilkor components EMI Suppression Film capacitors PCX2 337x6 (Mini) Safety VRac = 275 V~ X2 Cap. (㎌) loose and taped bxhxl (mm) CATALOGUE NUMBER PCX2 337 ..... loose in box MASS (g) lt = 5 ± 1.0 mm C – tol. ±20 % Pitch = 15.0 ± 0.4 mm C – tol. ±10 % lt = 25 ± 2.0 mm C – tol. ±20 % C – tol. ±10 % dt = 0.6 +0.06/-0.05 mm 0.01 5.0 x 11.0 x 18.0 1.6 F60103 F61103 F64103 F65103 0.015 5.0 x 11.0 x 18.0 1.6 F60153 F61153 F64153 F65153 0.022 5.0 x 11.0 x 18.0 1.6 F60223 F61223 F64223 F65223 0.033 5.0 x 11.0 x 18.0 1.6 F60333 F61333 F64333 F65333 0.047 5.0 x 11.0 x 18.0 1.6 F60473 F61473 F64473 F65473 0.068 5.0 x 11.0 x 18.0 1.6 F60683 F61683 F64683 F65683 0.1 5.0 x 11.0 x 18.0 1.6 F60104 F61104 F64104 F65104 0.15 6.0 x 12.0 x 18.0 1.7 F60154 F61154 F64154 F65154 Pitch = 15.0 ± 0.4 mm dt = 0.8 +0.08/-0.05 mm 0.22 7.0 x 13.5 x 18.0 1.9 F60224 F61224 F64224 F65224 0.33 8.5 x 13.5 x 18.0 2.4 FF0334 FF1334 FF4334 FF5334 0.33 8.5 x 15.0 x 18.0 2.6 F60334 F61334 F64334 F65334 0.47 10.0 x 16.5 x 18.0 3.1 F60474 F61474 F64474 F65474 0.68 11.0 x 18.5 x 18.0 4.1 F60684 F61684 F64684 F65684 Pitch = 22.5 ± 0.4 mm dt = 0.8 +0.08/-0.05 mm 0.22 6.0 x 15.5 x 26.0 3.0 J60224 J61224 J64224 J65224 0.33 6.0 x 15.5 x 26.0 3.0 J60334 J61334 J64334 J65334 0.47 7.0 x 16.5 x 26.0 3.5 J60474 J61474 J64474 J65474 0.68 8.5 x 18.0 x 26.0 4.4 J60684 J61684 J64684 J65684 1.0 10.0 x 19.5 x 26.0 5.5 J60105 - J64105 - 1.0 11.5 x 21.0 x 26.0 6.5 - J61105 - J65105 1.5 13.0 x 23.0 x 26.0 8.0 J60155 J61155 J64155 J65155 2.2 16.5 x 22.0 x 26.0 10.0 JF0225 JF1225 JF4225 JF5225 Pitch = 27.5 ± 0.4 mm dt = 0.8 +0.08/-0.05 mm 0.68 9.0 x 19.0 x 31.0 5.5 L60684 L61684 L64684 L65684 1.0 11.0 x 21.0 x 31.0 7.8 L60105 L61105 L64105 L65105 1.5 13.0 x 23.0 x 31.0 10.4 L60155 L61155 L64155 L65155 2.2 15.0 x 25.0 x 31.0 12.8 L60225 L61225 L64225 L65225 3.3 18.0 x 28.0 x 31.0 17.2 L60335 L61335 L64335 L65335 TYPE SPECIFICATION 11-06-02 ( C ) PILKOR ELECTRONICS 2011 5 OF 22 QSN-075-53 Pilkor components EMI Suppression Film capacitors Safety PCX2 337x6 (Mini) MOUNTING NORMAL USE The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for mounting on printed-circuit boards by means of automatic insertion machines. For detailed specifications refer to chapter "PACKAGING". SPECIFIC METHOD OF MOUNTING TO WITHSTAND VIBRATION AND SHOCK In order to withstand vibration and shock tests, it must be ensured that the stand-off pips are in good contact with the printed-circuit board. . For pitches of 15mm the capacitors shall be mechanically fixed by leads. . For larger pitches the capacitors shall be mounted in the same way and the body clamped. SPACE REQUIREMENTS ON PRINTED-CIRCUIT BOARD The maximum length and width of film capacitors are shown in the following drawing ; b max = b + 0.3mm Eccentricity Imax = I +0.3 mm - Eccentricity as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned. - Product height with seating plane as given by IEC 60717 as reference : hmax ≤ h+0.3mm TYPE SPECIFICATION 11-06-02 ( C ) PILKOR ELECTRONICS 2011 6 OF 22 QSN-075-53 Pilkor components EMI Suppression Film capacitors PCX2 337x6 (Mini) Safety RATINGS AND CHARACTERISTICS Unless otherwise specified all electrical values apply to an ambient temperature of 23±1℃, an atmospheric pressure of 86 to 106kPa and a relative humidity 50±2%. For reference testing, a conditioning period shall be applied of 96±4 hours by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20%. Maximum RMS Voltage as a function of frequency 103 AC voltage (V) 102 101 101 102 103 104 f(Hz) 105 AC voltage (RMS value) as a function of frequency at Tamb≤105℃ TYPE SPECIFICATION 13-06-11 ( C ) PILKOR ELECTRONICS 2013 7 OF 22 QSN-075-53 Pilkor components EMI Suppression Film capacitors Safety PCX2 337x6 (Mini) PRODUCT MARKING Capacitors are marked with having following information; 1.Manufacturer (PILKOR) 2.Manufacturer's type designation (PCX2 337 ) 3.Rated capacitance in code according to IEC 60062 4.Rated (AC) voltage (275V~) 5.Sub class (X2) 6.Tolerance on rated capacitance M =±20 % K = ±10 % 7.Climatic category (40/105/21) 8.Code for dielectric material (MKP) 9.Year and week of manufacturing (e.g. 1301) 10.Safety approvals Example of marking Pitch P = 10.0mm or P = 15.0mm 10n M 275V~ 10n M 275V~ X2 337 PILKOR 1301 337 PILKOR 1301 X2 CQC CQC 305V~ 305V~ Marking on the side or Marking on the side Pitch P = 15.0mm or P = 22.5 mm or P = 27.5mm PILKOR 1301 150n M 275V~ X2 PCX2 337 MKP CQC 40/105/21 Marking on the top 305V~ Marking on the side Pitch P = 22.5 mm or P = 27.5mm 1u M 275V~ X2 PCX2 337 MKP PILKOR 1301 CQC 40/105/21 305V~ Marking on headface Pitch P = 27.5mm 1u M 275V~ 337 PILKOR 1301 X2 CQC 305V~ Marking on the top TYPE SPECIFICATION 14-05-08 ( C ) PILKOR ELECTRONICS 2014 8 OF 22 QSN-075-53 Pilkor components EMI Suppression Film capacitors Safety PCX2 337x6 (Mini) PACKAGE MARKING The package containing the capacitors in marking as shown. PILKOR Electronics Safety INTERF. SUPPR. FILM CAPACITOR MKP RADIAL POTTED TYPE X2 0.1uF ±20% 275V~ 40/105/21 EN60384-14 EN132400 BATCH NO 3013001 2000 305V~ 250V~ DATE 1301 PCX2 337F60104 1 2 3 4 Manufacturer’s name Sub-family Type description and safety class X2 Capacitance value, tolerance, voltage and climatic category (IEC) 5 Safety approvals & Lead free marking(JEDEC-STD-97) 6 Batch nr. & production period year and week code 7 Quantity and Product code (12NC) *** Color of Label : White Color of Safety Marking : Red TYPE SPECIFICATION 13-12-06 ( C ) PILKOR ELECTRONICS 2013 9 OF 22 QSN-075-53 Pilkor components EMI Suppression Film capacitors Safety PCX2 337x6 (Mini) PACKAGING DIMENSIONS OF TAPED PRODCUTS TAPED ON REEL Capacitor with terminal pitch P = 10 mm Capacitor with terminal pitch P = 15 mm. TYPE SPECIFICATION 11-06-02 ( C ) PILKOR ELECTRONICS 2011 10 OF 22 QSN-075-53 Pilkor components EMI Suppression Film capacitors PCX2 337x6 (Mini) Safety Capacitor with terminal pitch P = 22.5 or 27.5 mm ITEM LEAD TO LEAD DISTANCE(mm) HEIGHT OF COMPONENT FROM TAPE CENTER TO SEATING PLANE(mm) COMPONENT HEIGHT FROM TAPE CENTER(mm) FEED HOLE TO LEAD CENTER(mm) SYMBOL VALUE F 22.5 H VALUE 27.5 18.5 11-06-02 0.5 H1 40 max 48 max P1 7.8 5.33 TYPE SPECIFICATION ( C ) PILKOR ELECTRONICS 2011 TOLERANCE +0.5/-0.1 0.7 11 OF 22 QSN-075-53 Pilkor components EMI Suppression Film capacitors PCX2 337x6 (Mini) Safety CHARACTERRISTICS OF TAPED PRODCUTS Cumulative pitch error 1.0mm/20 pitches Pull-out force of the component Pull-out force of the adhesive tape Tearing force of tape Storage temperature Relative humidity ≥ 5N ≥ 6N ≥ 15 N - 25 to + 40 ℃ max. 80% without condensation The max. number of empty places per reel shall not exceed 0.5% of the total number of components per reel, but no more than 2 consecutive positions may be vacant. Outlines of reel & ammo packing (dimensions in mm) W as function of product dimensions l = 12.5 or 18.0 mm b (mm) 4.0 5.0 6.0 7.0 8.5 10.0 W l = 26 or 31 mm 2 (mm) 40 45 45 45 45 50 b (mm) 6.0 7.0 8.5 9.0 10.0 11.0 13.0 15.0 18.0 TYPE SPECIFICATION 11-06-02 ( C ) PILKOR ELECTRONICS 2011 W 2 (mm) 50 50 50 50 50 55 55 60 60 12 OF 22 QSN-075-53 Pilkor components EMI Suppression Film capacitors Safety PCX2 337x6 (Mini) INSPECTION REQUIREMENTS Note 1 : Sub-clause numbers of tests and performance requirements refer to the Sectional Specification, IEC 384-14 and Section One this specification. Note 2 : Inspection levels are selected from IEC-Publication 410: Sampling Plans and Procedures for inspection by attributes. Note 3 : In this table : p = periodicity in months n = sample size D = destructive ND = non-destructive IL = inspection level ) IEC 410 AQL = acceptance quality level ) Note 4 : For this capacitors, considered as a solid construction, the periodicity of the vibration and shock test is reduced from 36 months to 6 months. Clause number and Test D or ND Condition IL n Performance Requirements S4 1) No visual damage , legible marking and as specified in Marking specification S3 1) As specified in dimension table of this specification Group A inspection (lot by lot) Sub-Group A1 ND 4.1 Visual examination 4.1 Dimensions 2) Sub-Group A2 3) Detail ND 4.2.2 capacitance At 1kHz 4.2.3 Tangent of loss angle At 10kHz Within specified tolerance C ≤ 1㎌ At 1kHz C ＞ 1㎌ 4.2.1 Voltage proof (test A) 4.2.5 Insulation resistance (test A) 1. C ≤ 1㎌ 2250V 1min 2. C ＞ 1㎌ 1850V 1min At 100V 1min. As in rating and characteristics of this specification No permanent breakdown (cut-off current 10mA) or flash over Self-healing allowed As in rating and characteristics of this specification 1) Number to be tested : Sample size as directly allotted to the code letter for IL in Table 2A of IEC 410 (Single sampling plan for normal inspection) The acceptance number complies with AQL value : 0.65 % 2) This test may be replaced by in-production testing, if SPC on dimensional measurements or other mechanisms to avoid parts exceeding the limits is installed. 3) The 100% End-of-line testing is followed by re-inspection by sampling in order to monitor outgoing quality level by defectives per million (DPM). The sampling level and the calculation of DPM values is in accordance with CECC 00 014, counting any parametric failure as a defective. In case one or more defectives occur in a lot, this lot shall be rejected. TYPE SPECIFICATION 13-02-18 ( C ) PILKOR ELECTRONICS 2013 13 OF 22 QSN-075-53 Pilkor components EMI Suppression Film capacitors Clause number and Test D or ND Condition Group C inspection (periodic) Sub-group C1A Part of a sample of sub-group C1 PCX2 337x6 (Mini) Safety p n 6 6 Performance Requirements D 4.1 dimension (detail) As specified in dimension table of this specification 4.3.1 initial measurement 4.3 robustness of terminations 1. Capacitance at 1kHz 2. Tangent of loss angle at 10kHz C ≤ 1㎌ at 1kHz C ＞ 1㎌ Tensile and bending 4.4 resistance to soldering heat Method : 1A Solder bath : 260℃ Duration : 10 s 4.14 component resistance Isopropylalcohol at temperature Method : 2 Immersion time : 5±0.5min Recovery time: min 1hour max 2hours Visual examination solvent 4.4.2 final measurements No visible damage room 1. Capacitance at 1kHz 2. Tangent of loss angle at 10kHz C ≤ 1㎌ at 1kHz C ＞ 1㎌ No visible damage Legible marking Δ C/C ≤ 5% of the value measured initially Increase of tanD For C ≤ 1㎌ ＜ 0.0080 For C ＞ 1㎌ ＜ 0.0050 Insulation resistance TYPE SPECIFICATION 11-06-02 ( C ) PILKOR ELECTRONICS 2011 As in rating and characteristics of this specification 14 OF 22 QSN-075-53 Pilkor components EMI Suppression Film capacitors Clause number and Test PCX2 337x6 (Mini) Safety D or ND Condition p n 6 12 Performance Requirements Group C inspection (periodic) Sub-group C1B Other part of a sample of sub-group C1 4.6.1 initial measurement D 1. Capacitance at 1kHz 2. Tangent of loss angle at 10kHz C ≤ 1㎌ at 1kHz 4.6 rapid change of temperature C ＞ 1㎌ Θ A = lower category temperature Θ B = upper category temperature 5 cycles duration time : 30 min 4.7 vibration (see note 4) Method of mounting : see the mounting of this specification Procedure : B4 Frequency range 10Hz to 55Hz amplitude : 0.75mm or acceleration 2 98m/s (which is less severe) Total duration : 6 hours 4.7.2 final examination Visual examination No visible damage 4.9 shock (see note 4) Method of mounting : see the mounting of this specification Pulse shape : half sine 2 Acceleration : 490 m/s Duration of pulse : 11ms Visual examination No visible damage 4.9.3 final measurements 1. Capacitance at 1kHz 2. Tangent of loss angle at 10kHz C ≤ 1㎌ at 1kHz C ＞ 1㎌ Insulation resistance TYPE SPECIFICATION 11-06-02 ( C ) PILKOR ELECTRONICS 2011 Δ C/C ≤ 5% of the value measured initially Increase of tanD For C ≤ 1㎌ ＜ 0.0080 For C ＞ 1㎌ ＜ 0.0050 As in rating and characteristics of this specification 15 OF 22 QSN-075-53 Pilkor components EMI Suppression Film capacitors Clause number and Test PCX2 337x6 (Mini) Safety D or ND Condition p n 6 18 Performance Requirements Group C inspection (periodic) Sub-group C1 Combined sample of specimens of sub-groups C1A and C1B D 4.11 climatic sequence 4.11.2 dry heat 4.11.3 damp heat cyclic test Db, first cycle 4.11.4 cold T = Tupper-category temperature Duration : 16 hours T = Tlower-category temperature Duration : 2 hours 4.11.6 damp heat cyclic test Db, remaining cycle 4.11.6.2 final measurements Visual examination No visible damage Legible marking 1. Capacitance at 1kHz Δ C/C ≤ 5% of the value measured initially 2. Tangent of loss angle at 10kHz C ≤ 1㎌ Increase of tanD For C ≤ 1㎌ at 1kHz C ＞ 1㎌ Insulation resistance Voltage proof 1200V (DC) for 1min TYPE SPECIFICATION 11-06-02 ( C ) PILKOR ELECTRONICS 2011 ＜ 0.0080 For C ＞ 1㎌ ＜ 0.0050 ≥ 50% of values in ratings and characteristics of this specification No permanent breakdown or flash over 16 OF 22 QSN-075-53 Pilkor components EMI Suppression Film capacitors Clause number and Test Sub-group C2 D or ND Condition D 4.12 damp heat steady state 21 days, 40℃ 90 – 95% R.H 4.12.1 initial measurements 1. Capacitance at 1kHz 2. Tangent of loss angle at 10kHz C ≤ 1㎌ at 1kHz 4.12.3 final measurements p n 6 10 Performance Requirements C ＞ 1㎌ Visual examination No visible damage Legible marking 1. Capacitance at 1kHz Δ C/C ≤ 5% of the value measured initially 2. Tangent of loss angle at 10kHz C ≤ 1㎌ Increase of tanD For C ≤ 1㎌ at 1kHz C ＞ 1㎌ Voltage proof 1350V (d.c) ＜ 0.0080 1min Insulation resistance TYPE SPECIFICATION 11-06-02 PCX2 337x6 (Mini) Safety ( C ) PILKOR ELECTRONICS 2011 For C ＞ 1㎌ ＜ 0.0050 No permanent breakdown or flash over ≥ 50% of values in ratings and characteristics of this specification 17 OF 22 QSN-075-53 Pilkor components EMI Suppression Film capacitors Clause number and Test Sub-group C3 4.13.1 initial measurements D or ND Condition D p n 3 12 Performance Requirements 1. Capacitance at 1kHz 2. Tangent of loss angle at 10kHz C ≤ 1㎌ at 1kHz 4.13 peak impulse voltage PCX2 337x6 (Mini) Safety C ＞ 1㎌ 3 successive impulse, full wave, peak voltage : for C ≤ 1㎌ : 2.5kV No selfhealing breakdown or flashover for C ＞ 1㎌ : 2.5kV/√ C ( C in ㎌) max : 24 pulses 4.14 endurance test Duration : 1000 hours 1.25 x VRac at 105℃ once in every hour the voltage is increased to 1000V(RMS) for 0.1 s via a resistor of 47Ω ± 5% 4.12.3 final measurements Visual examination No visible damage Legible marking 1. Capacitance at 1kHz Δ C/C ≤ 10% of the value measured initially 2. Tangent of loss angle at 10kHz C ≤ 1㎌ Increase of tanD For C ≤ 1㎌ at 1kHz C ＞ 1㎌ Insulation resistance Voltage proof 1350V (DC) for 1 min No permanent breakdown or flashover TYPE SPECIFICATION 11-06-02 ＜ 0.0080 For C ＞ 1㎌ ＜ 0.0050 ≥ 50% of values in ratings and characteristics of this specification ( C ) PILKOR ELECTRONICS 2011 18 OF 22 QSN-075-53 Pilkor components EMI Suppression Film capacitors Clause number and Test Sub-group C4 4.15.1 initial measurements D or ND Condition D p 6 n Performance Requirements 6 1. Capacitance at 1kHz 2. Tangent of loss angle at 10kHz C ≤ 1㎌ at 1kHz 4.15 charge and discharge PCX2 337x6 (Mini) Safety C ＞ 1㎌ 10000 cycles : charge to UR half sine wave Duration : 5ms Discharge resistance VRAC x √2 R = 1.5 x C x (dU/dt) with a minimum : 2.2Ω 4.15.3 final measurements 1. Capacitance at 1kHz Δ C/C ≤ 10% of the value measured initially 2. Tangent of loss angle at 10kHz C ≤ 1㎌ Increase of tanD For C ≤ 1㎌ at 1kHz C ＞ 1㎌ Insulation resistance TYPE SPECIFICATION 11-06-02 ( C ) PILKOR ELECTRONICS 2011 ＜ 0.0080 For C ＞ 1㎌ ＜ 0.0050 ≥ 50% of values in ratings and characteristics of this specification 19 OF 22 QSN-075-53 Pilkor components EMI Suppression Film capacitors Clause number and Test Sub-group C6 Safety D or ND Condition D 4.17 passive flammability p n 12 18 PCX2 337x6 (Mini) Performance Requirements 1.class B After removing test flame from capacitor, the capacitor must not continue burn for more than 10 s. Bore of gas jet : φ 0.5 mm Fuel : Butane Test duration for actual 3 volume V in mm 2.No burning particle must drop from the sample class B 3 Volume(mm ) V ≤ 250 250〈 V ≤ 500 500〈 V ≤ 1750 V ＞1750 Gas jet 10s 20s 30s 60s One flame application 12 6 45O Sub-group C7 4.18 active flammability D 12 24 20 discharges of a 3 uF tankcapacitor across the test capacitor. The test capacitor during the discharges connected to VR (16A). VR is maintained for 2 min after the last discharge TYPE SPECIFICATION 11-06-02 ( C ) PILKOR ELECTRONICS 2011 The cheese cloth around the capacitor shall not burn with a flame. Not electrical measurements are required. 20 OF 22 QSN-075-53 Pilkor components EMI Suppression Film capacitors Clause number and Test Sub-group ADD1 D or ND Solvent resistance of the marking A.2 Heat storage A.2.1 Initial measurement Condition D A.1 Solder ability Sub-group ADD2 PCX2 337x6 (Mini) Safety p n 3 10 Performance Requirements Without aging Method : 1 Non-activated colophiny flux 501 Solder bath : 245℃ Dwell time : 3 s Good tinning as evidenced by free flowing of the solder with wetting of the termination(＞95%) Isopropylalcohol at room temperature. Method : 1 Rubbing material cotton wool Immersion time : 5±0.5min Legible marking 3 D Duration : 1000h Temperature : upper temperature 12 category 1. Capacitance at 1kHz 2. Tangent of loss angle at 10kHz C ≤ 1㎌ A.2.2 Final measurement at 1kHz C ＞ 1㎌ 1. Capacitance at 1kHz 2. Tangent of loss angle at 10kHz C ≤ 1㎌ at 1kHz C ＞ 1㎌ Insulation resistance TYPE SPECIFICATION 11-06-02 ( C ) PILKOR ELECTRONICS 2011 Δ C/C ≤ 5% of the value measured initially Increase of tanD For C ≤ 1㎌ ＜ 0.0080 For C ＞ 1㎌ ＜ 0.0050 As in Rating and CHARACTERISTICS of this specification 21 OF 22 QSN-075-53 Pilkor components EMI Suppression Film capacitors Clause number and Test Sub-group ADD3 PCX2 337x6 (Mini) Safety D or ND Condition D A.3 Detergent resistance Density 20g/L dishwasher detergergent Temperature 70℃ during 3 minutes followed by rinsing in clear water for 1 minute Recovery time : 1 to 2 hours A3.1 Initial measurement 1. Capacitance at 1kHz p n 3 9 Performance Requirements Good tinning as evidenced by free flowing of the solder with wetting of the termination(＞95%) 2. Tangent of loss angle at 10kHz C ≤ 1㎌ at 1kHz C ＞ 1㎌ 1. Capacitance at 1kHz A.3.2 Final measurement Δ C/C ≤ 5% of the value measured initially 2. Tangent of loss angle at 10kHz C ≤ 1㎌ at 1kHz Increase of tanD For C ≤ 1㎌ C ＞ 1㎌ ＜ 0.0080 For C ＞ 1㎌ ＜ 0.0050 ≥ 50% of values in ratings and characteristics of this specification Insulation resistance Sub-group ADD4 6 D A.4 Resistance to soldering heat with preheating 10 Capacitors mounted on 1.6mm board with nonplated hole Body temp : 100℃ Bath temp : < 260℃ Dwell time : 10 s 1. Capacitance at 1kHz A.4.1 Initial measurement 2. Tangent of loss angle at 10kHz C ≤ 1㎌ at 1kHz C ＞ 1㎌ 1. Capacitance at 1kHz A.4.2 Final measurement Δ C/C ≤ 5% of the value measured initially ` Increase of tanD For C ≤ 1㎌ ＜ 0.0080 For C ＞ 1㎌ ＜ 0.0050 Sub-group ADD5 A.5 Thermal Shock 12 D 10 θA = lower category temperature ∆C/C < 10% θB = upper category temperature 100 cycles ∆tanδ(1KHz) < 0.005 Duration t = 30 min Rins > 50% specified value TYPE SPECIFICATION 13-06-11 ( C ) PILKOR ELECTRONICS 2013 22 OF 22 QSN-075-53 Safety CONSTRUCTION z Product type ; Metallized Polypropylene film capacitors z Model name ; PCX2 Series (5) e3 (1) (2) (3) Metallized Polypropylene film (4) Description Material 1 MKP Film Metallized polypropylene 2 Metal Spray Tin-Zinc 3 Epoxy UL94V-0 4 Lead wire Tin plated Cp steel wire 0.6/0.8mm [Sn100%: 10 ㎛] 5 PP case POLYPROPYLENE UL94-V0 PILKOR ELECTRONICS CO., LTD