Jumper Wire & Zerohm Resistors Uniohm Corporation Jumper Wire & Zerohm Resistors Film Type Zerohm 1/8W，1/4W Series MR CR JP FEATURES ◆ Similar to 1/4 Watt resistor (1/8w size also available, typical resistance 0.004Ω). MR-12，MR-25 (Metal Film) CR-12，CR-25 (Carbon Film) ◆ Ideal for automatic insertion or Cut and Form. Wire Type Zerohm Jumper Wires 0.5Φ，0.6Φ，0.7Φ，0.8Φ，0.9Φ，1.0Φ ◆ Available in Tape/Reel, Tape/Box (Ammo Pack) and Bulk. ◆ Film type Zerohm also available in 1/4w & 1/8w size APPLICATION SPECIFICATIONS Jumper wires or crossovers, as they are sometimes called, are basically interconnection devices between points on a P.C. Board. Generally they are used for the following reasons： ◆ Inability to other circuit paths which must be crossed over. ◆ An After-the-Fact design change that requires new Point connections. ◆ Circuit tuning by changing point connections. Jumper wires offers a quick simple solution to these problems. They are expecially suited for automatic machine insertion on lead tape or available in all pack-aging styles including precut and formed leads for manual insertion. Maximum Resistance…………………0.005Ω Lead material……………..……in-plated copper Body Material. ……….……….high performance Film ceramic rod Min. Insulation Resistance： Dry. ……………..……………….10,000 megΩ Wet. ………………………………...100megΩ Min. Dielectric Withstanding Voltage： Atmospheric. …………………….….500V RMS Reduced……………………………..325V RMS Insulation Flammability. …..….resistor insulation Is self extinguishing within 10 seconds after externally applied flame is removed. Current Rating………15 AMPS at 70°C for 1/4w Packaging.. …..………Tape-5,000 pcs/Box/Reel Bulk-1,000 pcs (500 per bag) DIMENSIONS 1